CATALOG | OCTOBER 2021

Low voltage
General performance cast iron motors
for Europe
With expertise, and a
comprehensive portfolio of
products and life-cycle services,
we help value-minded industrial
customers improve their energy
efficiency and productivity.

2 9AKK108196EN
9AKK105789 EN10-2021
6-2018 || ABB
ABB IEC
Motors
LV MOTORS
and Generators
Low voltage General performance
cast iron motors
Sizes 71 to 355, 0.18 to 355 kW

4 General information

7 Mounting arrangements
8 Cooling
9 Degrees of protection: IP code/IK code
10 Insulation
11 Voltage and frequency

12 Cast iron motors

12 Ordering information
13 Rating plates
14 Technical data IE3
17 Technical data IE2
20 Variant codes
22 Mechanical design
28 Dimension drawings IE3
29 Dimension drawings IE2
30 Motors in brief

34 Total product offering

35 ABB’s portfolio of drives

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 3

International motor efficiency standards
and regulations

Regulation EC
EU 1781/2019

Energy Efficiency Regulations,

BIS IS 12615, India MKE-2015-28,
EE Regulations 2016, Canada
South-Korea

DOE 10 CFR Part 431 (Integral

Horsepower Motor Rule), US
JIS 4213, Japan
NOM-016-ENER-2016, GB18613-2020, China
Mexico CNS 14400, Taiwan
Decree No. 21/2011/ND-CP, Vietnam
Singapore
PRTE-145, Equador Portaria Greenhouse and Energy Minimum
RTEE, Peru interministerial Standards Act, Australia
No 553, Brazil Indonesia
Energy efficiency and
SASO/IEC Conservation Authority
IRAM 62405, New Zealand
Argentina 60034-30,
Chile
Saudi-Arabia

Since the validation of IEC 60034-30:2008 and its Minimum energy performance standards
refined version IEC 60034-30-1:2014, a worldwide While the IEC as an international standardization
energy efficiency classification system has existed organization sets guidelines for motor testing
for low voltage three-phase asynchronous motors. and efficiency classes, the organization does
These international standards have been created not regulate efficiency levels in countries. The
to enable and increase the level of harmonization biggest drivers for mandatory Minimum Energy
in efficiency regulations around the world and to Performance Standard (MEPS) levels for electric
also cover motors for explosive atmospheres. motors are global climate change, government
targets to curb CO2 emissions and rising electricity
IEC 60034-30-1:2014 defines International demand, especially in developing countries. The
Efficiency (IE) classes for single speed, three- whole value chain, from manufacturer up to end
phase, 50 Hz and 60 Hz induction motors. The user, must be aware of the legislation in order
efficiency levels defined in IEC 60034-30-1 are to meet local requirements, to save energy and
based on the test method specified in IEC 60034- reduce the carbon footprint.
2-1:2014. Both standards are part of an effort to
unify motor testing procedures with CSA390-10 Harmonized global standards and the increasing
and IEEE 112 standards as well as efficiency and adoption of MEPS around the world are good news
product labeling (IE) requirements to enable motor for all of us. However, it is important to remember
purchasers worldwide to easily recognize premium that harmonization is an ongoing process. Even
efficiency products. though MEPS are already in effect in several
regions and countries, they are evolving and differ
To promote transparency in the market, IEC in terms of scope and requirements. At the same
60034-30-1 states that both the efficiency class time, more countries are planning to adopt their
and efficiency value must be shown on the motor own MEPS regulations. A view of existing and
rating plate and in product documentation. The coming MEPS regulations in the world can be seen
documentation must clearly indicate the efficiency on the World map above.
testing method used as different methods can
produce differing results. To get the latest information please visit www.abb.
com/motors&generators/energyefficiency.

4 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

 IEC 60034-30-1:2014 100
01 IE Classes - 4-pole
motors. This standard defines four International Efficiency
90
(IE) classes for single speed electric motors that
are rated according to IEC 60034-1 or IEC 60079-
80

Efficiency %
0 (explosive atmospheres) and designed for IE4
IE3
operation on sinusoidal voltage. 70 IE2
IE1

– IE4 = Super premium efficiency 60

– IE3 = Premium efficiency, identical to the table

50
in 10CFR431 (‘NEMA Premium’) in the USA and 0.12 0.37 0.75 1.5 3 7.5 15 37 90 160 400 1000

CSA C390-10:2015 for 60 Hz Output kW

– IE2 = High efficiency
– IE1 = Standard efficiency __
01
IEC 60034-30-1 covers the power range from 0.12
kW up to 1000 kW. Most of the different technical ABB and efficiency standards
constructions of electric motors are covered as ABB determines efficiency values according to
long as they are rated for direct on-line operation. IEC 60034-2-1 using the low uncertainty method
The coverage of the standard includes: (i.e. summaration of losses), with additional load
losses determined by the method of residual loss.
– Single speed electric motors (single and three-
phase), 50 and 60 Hz It is good to mention and emphasize that the
– 2, 4, 6 and 8 poles IEC 60034-2-1 test method, which is known as an
– Rated output PN from 0.12 kW to 1000 kW indirect method, is technically equivalent to the
– Rated voltage UN above 50 V up to 1 kV test methods in the standards CSA 390-10 and
– Motors capable of continuous operation at IEEE 112 Method B leading to the equivalent losses
their rated power with a temperature rise and thus efficiency values. Both test methods can
within the specified insulation temperature be used by ABB and shall be used for both Canada
class and the US where IEC 60034-2-1 is not recognized
– Motors, marked with any ambient temperature yet.
within the range of -20 °C to +60 °C
– Motors, marked with an altitude up to 4000 m As the world market leader, ABB offers the largest
above sea level range of low voltage motors available. It has long
advocated the need for efficiency in motors, and
By comparing IEC 60034-30-1 to CSA C390- high efficiency products have formed the core of
10:2015 and “10CFR431 Subpart B – Electric its portfolio for many years.
motors”, it can be seen that the efficiency limits
and tables are well aligned and their major
difference is in the scope of the output power
where CSA and 10CFR431 have a maximum power
of 500 hp. There are also some minor differences
in the scope of excluded motors.

Note: CFR is Code of Federal Regulations.

  
The following motors are excluded from IEC
60034-30-1:

– Single-speed motors with 10 or more poles or

multi-speed motors
– Motors completely integrated into a machine
(for example pump, fan or compressor) that
cannot be tested separately from the machine
– Brake motors, when the brake cannot be
dismantled or separately fed

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 5

 Nominal efficiency limits defined in IEC
60034-30-1:2014 (reference values at 50 Hz,
based on test methods specified in IEC 60034-
2-1:2014).
Output IE1 IE2 IE3 IE4
Standard efficiency High efficiency Premium efficiency Super Premium efficiency

kW 2 4 6 8 2 pole 4 6 8 2 4 6 8 2 4 6 8
pole pole pole pole pole pole pole pole pole pole pole pole pole pole pole
0.12 45.0 50.0 38.3 31.0 53.6 59.1 50.6 39.8 60.8 64.8 57.7 50.7 66.5 69.8 64.9 62.3
0.18 52.8 57.0 45.5 38.0 60.4 64.7 56.6 45.9 65.9 69.9 63.9 58.7 70.8 74.7 70.1 67.2
0.20 54.6 58.5 47.6 39.7 61.9 65.9 58.2 47.4 67.2 71.1 65.4 60.6 71.9 75.8 71.4 68.4
0.25 58.2 61.5 52.1 43.4 64.8 68.5 61.6 50.6 69.7 73.5 68.6 64.1 74.3 77.9 74.1 70.8
0.37 63.9 66.0 59.7 49.7 69.5 72.7 67.6 56.1 73.8 77.3 73.5 69.3 78.1 81.1 78.0 74.3
0.40 64.9 66.8 61.1 50.9 70.4 73.5 68.8 57.2 74.6 78.0 74.4 70.1 78.9 81.7 78.7 74.9
0.55 69.0 70.0 65.8 56.1 74.1 77.1 73.1 61.7 77.8 80.8 77.2 73.0 81.5 83.9 80.9 77.0
0.75 72.1 72.1 70.0 61.2 77.4 79.6 75.9 66.2 80.7 82.5 78.9 75.0 83.5 85.7 82.7 78.4
1.1 75.0 75.0 72.9 66.5 79.6 81.4 78.1 70.8 82.7 84.1 81.0 77.7 85.2 87.2 84.5 80.8
1.5 77.2 77.2 75.2 70.2 81.3 82.8 79.8 74.1 84.2 85.3 82.5 79.7 86.5 88.2 85.9 82.6
2.2 79.7 79.7 77.7 74.2 83.2 84.3 81.8 77.6 85.9 86.7 84.3 81.9 88.0 89,5 87.4 84.5
3 81.5 81.5 79.7 77.0 84.6 85.5 83.3 80.0 87.1 87.7 85.6 83.5 89.1 90.4 88.6 85.9
4 83.1 83.1 81.4 79.2 85.8 86.6 84.6 81.9 88.1 88.6 86.8 84.8 90.0 91.1 89.5 87.1
5.5 84.7 84.7 93.1 81.4 87.0 87.7 86.0 83.8 89.2 89.6 88.0 86.2 90.9 91.9 90.5 88.3
7.5 86.0 86.0 84.7 83.1 88.1 88.7 87.2 85.3 90.1 90.4 89.1 87.3 91.7 92.6 91.3 89.3
11 87.6 87.6 86.4 85.0 89.4 89.8 88.7 86.9 91.2 91.4 90.3 88.6 92.6 93.3 92.3 90.4
15 88.7 88.7 87.7 86.2 90.3 90.6 89.7 88.0 91.9 92.1 91.2 89.6 93.3 93.9 92.9 91.2
18.5 89.3 89.3 88.6 86.9 90.9 91.2 90.4 88.6 82.4 92.6 91.7 90.1 93.7 94.2 93.4 91.7
22 89.9 89.9 89.2 87.4 91.3 91.6 90.9 89.1 92.7 93.0 92.2 90.6 94.0 94.5 93.7 92.1
30 90.7 90.7 90.2 88.3 92.0 92.3 91.7 89.8 93.3 93.6 92.9 91.3 94.5 94.9 94.2 92.7
37 91.2 91.2 90.8 88.8 92.5 92.7 92.2 90.3 93.7 93.9 93.3 91.8 94.8 95.2 94.5 93.1
45 91.7 91.7 91.4 89.2 92.9 93.1 92.7 90.7 94.0 94.2 93.7 92.2 95.0 95.4 94.8 93.4
55 92.1 92.1 91.9 89.7 93.2 93.5 93.1 91.0 94.3 94.6 94.1 92.5 95.3 95.7 95.1 93.7
75 92.7 92.7 92.6 90.3 93.8 94.0 93.7 91.6 94.7 95.0 94.6 93.1 95.6 96.0 95.4 94.2
90 93.0 93.0 92.9 90.7 94.1 94.2 94.0 91.9 95.0 95.2 94.9 93.4 95.8 96.1 95.6 94.4
110 93.3 93.3 93.3 91.1 94.3 94.5 94.3 92.3 95.2 95,4 95.1 93.7 96.0 96.3 95.8 94.7
132 93.5 93.5 93.5 91.5 94.6 94.7 94.6 92.6 95.4 95.6 95.4 94.0 96.2 96.4 96.0 94.9
160 93.8 93.8 93.8 91.9 94.8 94.9 94.8 93.0 95.6 95.8 95.6 94.3 96.3 96.6 96.2 95.1
200 94.0 94.0 94.0 92.5 95.0 95.1 95.0 93.5 95.8 96.0 95.8 94.6 96.5 96.7 96.3 95.4
250 94.0 94.0 94.0 92.5 95.0 95.1 95.0 93.5 95.8 96.0 95.8 94.6 96.5 96.7 96.5 95.4
315 94.0 94.0 94.0 92.5 95.0 95.1 95.0 93.5 95.8 96.0 95.8 94.6 96.5 96.7 96.6 95.4
355 94.0 94.0 94.0 92.5 95.0 95.1 95.0 93.5 95.8 96.0 95.8 94.6 96.5 96.7 96.6 95.4
400 94.0 94.0 94.0 92.5 95.0 95.1 95.0 93.5 95.8 96.0 95.8 94.6 96.5 96.7 96.6 95.4
450 94.0 94.0 94.0 92.5 95.0 95.1 95.0 93.5 95.8 96.0 95.8 94.6 96.5 96.7 96.6 95.4
500- 94.0 94.0 94.0 92.5 95.0 95.1 95.0 93.5 95.8 96.0 95.8 94.6 96.5 96.7 96.6 95.4
1000

6 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Mounting arrangements

Foot-mounted motor
Code I / code II Product code pos. 12
A: foot-mounted, term. box top

IM B3 IM V5 IM V6 IM B6 IM B7 IM B8
IM 1001 IM 1011 IM 1031 IM 1051 IM 1061 IM 1071

Flange-mounted motor, large flange

Code I / code II Product code pos. 12
B: flange mounted, large flange

IM B5 IM V1 IM V3 *) *) *)
IM 3001 IM 3011 IM 3031 IM 3051 IM 3061 IM 3071

Flange-mounted motor, small flange

Code I / code II Product code pos. 12
Small flange mounted motor IM B14 to be ordered
as modification option, see variant code list.

IM B14 IM V18 IM V19 *) *) *)

IM 3601 IM 3611 IM 3631 IM 3651 IM 3661 IM 3671

Foot- and flange-mounted motor with feet, large flange

Code I / code II Product code pos. 12
Foot-flange mounted motor IM B35 to be ordered
as modification option, see variant code list..

IM B35 IM V15 IM V35 *) *) *)

IM 2001 IM 2011 IM 2031 IM 2051 IM 2061 IM 2071

Foot- and flange-mounted motor with feet, small flange

Code I / code II Product code pos. 12
Foot-flange mounted motor IMB34 o be ordered
as modification option, see variant code list.

IM B34 IM V17
IM 2101 IM 2111 IM 2131 IM 2151 IM 2161 IM 2171

*) Not stated in IEC 60034-7.

Note: If the motor is mounted shaft upwards, take measures to prevent water or any other liquid from running down the shaft into the motor.

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 7

General information
Cooling

Designation system concerning methods of cooling refers to standard IEC 60034-6.

Explanation of the product code

International Cooling Circuit arrangement Primary coolant Method of movement of Secondary coolant Method of movement of
primary coolant secondary coolant

IC 4 (A) 1 (A) 6
1 2 3 4 5

Position 1
0: Free circulation (open circuit)
4: Free circulatio (open circuit)

Position 2
A: For air (omitted for simplifi ed designation)

Position 3
0: Free convection
1: Self-circulation
6: Machine-mounted independent component

Position 4
A: For air (omitted for simplifi ed designation)
W: For water

Position 5
0: Free convection
1: Self-circulation
6: Machine-mounted independent component
8: Relative displacement

8 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

General information
Degrees of protection: IP code/IK code

Classification of degrees of protection provided by IK code

enclosures of rotating machines are refers to: Classification of degrees of protection provided by
enclosure for motors against external mechanical
– Standard IEC 60034-5 or EN 60529 for IP code impacts.
– Standard EN 50102 for IK code

IP protection
Protection of persons against getting in contact
with (or approaching) live parts and against
contact with moving parts inside the enclosure.
Also protection of the machine against ingress
of solid foreign objects. Protection of machines
against the harmful effects due to the ingress of Position 1
water. Relation between IK code and impact energy:

IK code Impact energy/Joule

0: Not protected according to EN 50102
01: 0.15
02: 0.2
03: 0.35
04: 0.5
05: 0.7
06: 1
Position 1 07: 2
2: Motors protected against solid objects greater than 08: 5 (ABB Standard)
12 mm 09: 10
4: Motors protected against solid objects greater than 10: 20
1 mm
5: Dust-protected motors
6: Dust-tight motors

Position 2
3: Motors protected against spraying water
4: Motors protected against splashing water
5: Motors protected against water jets
6: Motors protected against heavy seas

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 9

Insulation

ABB uses class F insulation, which, with

01 Safety margins per
thermal class. temperature rise B, is the most common
requirement among industry today.

The use of class F insulation with class B

temperature rise gives ABB products a 25 °C safety
margin. This can be used to increase the loading
for limited periods, to operate at higher ambient
temperatures or altitudes, or with greater voltage
and frequency tolerances. It can also be used to
extend insulation. For instance, a 10 K temperature
reduction will extend the insulation life.

Thermal class 130 (B)

– Nominal ambient temperature 40 °C
– Max permissible temperature rise 80 K
– Hot spot temperature margin 10 K

Thermal class 155 (F)

– Nominal ambient temperature 40 °C
– Max permissible temperature rise 105 K
– Hot spot temperature margin 10 K

Thermal class 180 (H)

– Nominal ambient temperature 40 °C
– Max permissible temperature rise 125 K
– Hot spot temperature margin 10 K

°C
180
10
155
10
130
10
120

80 105 125
40

40 40 40
0
B F H
130 155 180

__
01

10 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

General information
Voltage and frequency

The impact on temperature rise caused by voltage Key

01 Voltage and frequency
deviation in zones A and frequency fluctuation is defined in IEC 60034- X axis frequency p.u.
and B.
1. The standard divides the combinations into Y axis voltage p.u.
two zones, A and B. Zone A is the combination 1 zone A
of voltage deviation of +/-5 % and frequency 2 zone B (outside zone A
deviation of +/-2 %. Zone B is the combination 3 rating point
of voltage deviation of +/-10 % and frequency
deviation of +3/-5 %. This is illustrated in figure
below.

Motors are capable of supplying the rated torque

in both zones A and B, but the temperature rise
will be higher than at rated voltage and frequency.
Motors can be run in zone B only for a short period
of time.
Y
1.10

1.05

1.03
1
3
1.09
X
0.95 0.98 1.00 1.02
2

0.93

0.95

0.90

__
01

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 11

Ordering information

Explanation of the product code

Motor type Motor size Product code Mounting arrangement code, Variant codes
Voltage and frequency code,
Generation code

M2BAX 112MA 3GBA 112 310 - ADC 002, etc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Positions 1 to 4 Position 13 (marked with black dot in data tables)

Voltage and frequency
3GBA: Totally enclosed fan cooled squirrel cage motor Single-speed motors
with cast iron frame
D: 400 VΔ, 690 VY, 380 VΔ, 660 VY, 50 Hz
S: 230 VΔ, 400 VY, 220 VΔ, 380 VY, 50 Hz
Positions 5 and 6
IEC size
07: 71
Position 14
08: 80
A, B, C...= Generation code followed by variant codes
09: 90
10: 100
Efficiency values are given according to IEC 60034-
11: 112
2-1; 2014
13: 132
16: 160
18: 180 For detailed dimension drawings please see our
20: 200 web-pages ‘www.abb.com/motors&generators’ or
22: 225 contact ABB.
25: 250
28: 280
31: 315
35: 355

Position 7
Speed (Pole pairs)
1: 2 poles
2: 4 poles
3: 6 poles

Positions 8 to 10
Running number

Position 11
-(dash)

Position 12 (marked with black dot in data tables)

Mounting arrangement
A: Foot-mounted, top-mounted terminal box
B: Flange-mounted, large flange

12 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Rating plates

ABB Sp. z o.o.

1 ul. Placydowska 27 2
95-070 Aleksandrów Lódzki Poland

3
IEC60034-1 4
3~ Motor M2BAX 160MLA 4 IMB3/IM1001 2021
5 6
503215275-300
No. 3G1C21330001082001 Ins. cl. F IP 55 9
7 V Hz kW r/min A cos Duty
690 Y 50 11 1477 12.2 0.82 S1
400 D 50 11 1477 21.1 0.82 S1
8 660 Y 50 11 1474 12.7 0.83 S1 10
380 D 50 11 1474 21.9 0.83 S1

11 IE3-91.4%(100%)-91.8%(75%)-91.1%(50%)

12 Product code 3GBA162410-ADF

13 6209-2Z/CE 6209-2Z/CE 136 kg 14

1 ABB logo
2 Manufacturing place
3 CE mark for fulfilling European Directives and Regulations
4 Manufacturing standard
5 Product description
6 Manufacturing year
7 Factory order reference number
8 Serial number
9 Insulation class, IP protection class
10 Voltage, Frequency, output, speed, current, power factory, duty
11 Efficiency class and efficiency 50 Hz at 100%, 75%, 50%; 60 Hz at 100%
12 Product code
13 Bearing type
14 Weight

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 13

Technical data
IE3 General performance cast iron motors

IP 55 - IC 411 - Insulation class F, temperature rise class B

IE3 efficiency class according to IEC 60034-30-1; 2014
Efficiency
IEC 60034-30-1; 2014 Current Torque
Moment Sound
Full 3/4 1/2 Power of inertia pressure
Output Speed load load load factor IN TN J = 1/4 Weight Level LPA
kW Motor type Product code r/min 100% 75% 50% Cosj A IS/IN Nm TI/TN Tb/TN GD2kgm2 kg dB

3000 r/min = 2 poles 400 V 50 Hz CENELEC-design

0,37 M2BAX 71MC 2 3GBA071330-••D 2819 76,5 76,0 73,4 0,8 0,86 6,6 1,26 2,7 3,2 0,00035 10 50
0,55 M2BAX 71MB 2 3GBA071320-••D 2816 78,4 78,1 75,9 0,8 1,27 6,1 1,88 2,7 3,2 0,0004 10 49
0,75 M2BAX 80MC 2 3GBA081330-••D 2891 80,7 81,0 78,9 0,8 1,66 7,5 2,49 2,9 3,7 0,00081 16 58
1,1 M2BAX 80MD 2 3GBA081340-••D 2860 82,7 83,3 82,6 0,84 2,29 7,6 3,7 3,2 3,6 0,00102 17 60
1,5 M2BAX 90SB 2 3GBA091120-••D 2912 84,2 84,0 82,5 0,83 3,04 8,6 4,96 2,8 3,9 0,00234 23 54
2,2 M2BAX90SLA 2 3GBA091010-••D 2908 85,9 85,6 83,9 0,81 4,54 8,8 7,26 3,2 3,9 0,003 26 67
3 M2BAX 100LKA 2 3GBA101810-••D 2910 87,1 88,0 88,0 0,91 5,38 8,9 9,84 3,0 3,8 0,00691 42 60
4 M2BAX 112MB 2 3GBA111320-••D 2908 88,1 89,0 89,1 0,91 7,2 9,7 13,14 3,0 3,8 0,00711 42 64
5,5 M2BAX 132SMA 2 3GBA131210-••D 2931 89,2 89,8 89,2 0,83 10,5 8,6 17,92 2,4 4,0 0,0136 64 65
7,5 M2BAX 132SMB 2 3GBA131220-••D 2921 90,1 91,0 90,9 0,84 14 9,0 24,5 2,6 4,0 0,0166 72 65
11 M2BAX 160MLA 2 3GBA161410-••F 2943 91,2 92,0 91,6 0,91 19,1 7,2 35,57 2,6 3,6 0,057 121 69
15 M2BAX 160MLB 2 3GBA161420-••F 2947 91,9 92,2 91,8 0,88 26,5 8,2 48,49 3,2 4,2 0,063 128 69
18,5 M2BAX 160MLC 2 3GBA161430-••F 2949 92,4 93,0 92,6 0,9 32 9,0 59,81 3,3 3,9 0,076 145 73
22 M2BAX 180MLA 2 3GBA181410-••F 2941 92,7 93,0 92,7 0,84 41,1 8,7 71,42 3,4 4,1 0,073 152 70
30 M2BAX 200MLA 2 3GBA201410-••F 2961 93,3 93,3 92,6 0,89 52 10,0 96,89 3,7 4,1 0,144 250 80
37 M2BAX 200MLB 2 3GBA201420-••F 2951 93,7 93,9 93,3 0,89 63,9 10,5 119 4,2 4,1 0,16 268 78
45 M2BAX 225SMA 2 3GBA221210-••F 2962 94,0 94,0 93,3 0,85 81,3 9,3 145 3,8 4,1 0,223 278 80
55 M2BAX 250SMA 2 3GBA251210-••F 2965 94,3 94,3 93,7 0,87 96,4 7,4 177 3,4 3,0 0,344 335 78
75 M2BAX 280SMF 2 3GBA281260-••F 2971 94,7 94,7 94,0 0,89 129 7,7 241 2,7 3,3 0,6 527 78
90 M2BAX 280SMG 2 3GBA281270-••F 2970 95,0 95,3 95,2 0,91 152 8,0 289 3,1 3,3 0,7 576 76
110 M2BAX 315SMB 2 3GBA311220-••M 2982 95,2 94,9 93,9 0,87 192 7,0 352 1,8 2,7 1,3 801 78
132 M2BAX 315SMC 2 3GBA311230-••M 2982 95,4 95,4 94,6 0,87 229 6,8 422 2,0 2,8 1,5 852 78
160 M2BAX 315SMD 2 3GBA311240-••M 2983 95,6 95,6 94,9 0,87 275 7,4 512 2,2 2,8 1,7 909 78
200 1)
M2BAX 315MLA 2 3GBA311410-••M 2983 95,8 96,0 95,5 0,88 342 7,5 640 2,3 3,1 2,1 1051 81
250 M2BAX 355SMA 2 3GBA351210-••M 2985 95,8 95,6 94,6 0,89 423 7,7 800 2,1 3,3 3 1412 83
315 M2BAX 355SMB 2 3GBA351220-••M 2980 95,8 95,7 95,0 0,89 529 7,0 1009 2,1 3,0 3,4 1495 83
355 M2BAX 355SMC 2 3GBA351230-••M 2984 95,8 95,8 95,0 0,88 605 7,2 1136 2,2 3 3,6 1565 83
1)
Temperature rise class F

14 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Technical data
IE3 General performance cast iron motors

IP 55 - IC 411 - Insulation class F, temperature rise class B

IE3 efficiency class according to IEC 60034-30-1; 2014
Efficiency
IEC 60034-30-1; 2014 Current Torque
Moment Sound
Full 3/4 1/2 Power of inertia pressure
Output Speed load load load factor IN TN J = 1/4 Weight Level LPA
kW Motor type Product code r/min 100% 75% 50% Cosj A IS/IN Nm TI/TN Tb/TN GD2kgm2 kg dB

1500 r/min = 4 poles 400 V 50 Hz CENELEC-design

0,25 M2BAX 71MB 4 3GBA072320-••D 1440 73,5 70,1 63,8 0,64 0,78 6,1 1,67 2,7 3,5 0,00075 10 41
0,37 M2BAX 71MLA 4 3GBA072410-••D 1441 77,3 74,9 69,8 0,66 1,06 6,8 2,47 2,7 3,8 0,00098 12 50
0,55 M2BAX 80MC 4 3GBA082330-••D 1446 80,8 80,7 78,0 0,74 1,32 8,4 3,64 2,7 3,9 0,00228 17 48
0,75 M2BAX 80MLA 4 3GBA082410-••D 1445 82,5 81,2 77,6 0,7 1,84 8,2 4,88 3,8 4,6 0,00295 21 49
1,1 M2BAX 90SB 4 3GBA092120-••D 1438 84,1 83,4 80,9 0,73 2,59 7,9 7,28 3,6 4,2 0,00394 23 48
1,5 M2BAX 90SLA 4 3GBA092010-••D 1434 85,3 84,4 82,1 0,73 3,52 7,9 9,95 3,9 4,0 0,00485 25 44
2,2 M2BAX 100LB 4 3GBA102520-••D 1450 86,7 86,1 84,1 0,78 4,74 9,3 14,53 3,4 4,4 0,00863 34 50
3 M2BAX 100LKA 4 3GBA102810-••D 1448 87,7 87,7 86,5 0,79 6,25 9,6 19,86 3,6 4,5 0,0115 41 57
4 M2BAX 112MLA 4 3GBA112410-••D 1443 88,6 89,6 89,4 0,82 7,91 9,5 26,59 3,6 4,3 0,0152 50 56
5,5 M2BAX 132SMA 4 3GBA132210-••D 1463 89,6 90,5 90,3 0,77 11,4 7,9 35,9 2,6 3,3 0,0297 67 68
7,5 M2BAX 132MLA 4 3GBA132410-••D 1456 90,4 91,1 90,8 0,78 15,2 8,8 49,1 2,5 3,0 0,039 84 65
11 M2BAX 160MLA 4 3GBA162410-••F 1477 91,4 91,8 91,1 0,82 21,1 7,6 71,27 2,6 3,3 0,11 136 61
15 M2BAX 160MLB 4 3GBA162420-••F 1477 92,1 92,4 91,6 0,82 28,5 8,2 96,99 3,0 3,7 0,135 161 61
18,5 M2BAX 180MLA 4 3GBA182410-••F 1472 92,6 92,6 92,0 0,82 35 10,3 120 3,6 4,0 0,135 169 64
22 M2BAX 180MLB 4 3GBA182420-••F 1473 93,0 93,2 92,5 0,8 42,8 10,1 143 3,3 4,2 0,167 198 65
30 M2BAX 200MLA 4 3GBA202410-••F 1481 93,6 94,0 93,5 0,82 56,3 10,0 193 3,9 3,0 0,32 282 69
37 M2BAX 225SMA 4 3GBA222210-••F 1479 93,9 94,2 93,7 0,81 70,3 9,3 238 2,5 3,0 0,376 278 67
45 M2BAX 225SMB 4 3GBA222220-••F 1481 94,2 94,4 93,8 0,79 87,8 9,1 288 4,2 3,6 0,415 293 68
55 M2BAX 250SMA 4 3GBA252210-••F 1479 94,6 94,7 94,0 0,83 102 10,1 352 4,4 3,4 0,62 386 74
75 M2BAX 280SMF 4 3GBA282260-••F 1481 95,0 95,1 95,0 0,83 137 8,6 484 3,6 3,8 0,959 530 68
90 M2BAX 280SMG 4 3GBA282270-••F 1482 95,2 95,3 95,2 0,85 161 8,4 580 3,8 3,9 1,17 593 68
110 M2BAX 315SMB 4 3GBA312220-••M 1489 95,4 95,4 94,8 0,85 196 7,0 705 2,1 3,0 2,43 823 71
132 M2BAX 315SMC 4 3GBA312230-••M 1488 95,6 95,8 95,3 0,86 231 6,7 847 2,2 2,9 2,9 892 71
160 M2BAX 315SMD 4 3GBA312240-••M 1488 95,8 96,0 95,8 0,85 282 6,9 1026 2,2 3,0 3,2 933 71
200 M2BAX 315MLB 4 3GBA312420-••M 1487 96,0 96,4 96,4 0,86 351 6,8 1284 2,4 3,0 3,9 1091 74
250 M2BAX 355SMA 4 3GBA352210-••M 1491 96,0 96,0 95,6 0,86 435 6,4 1601 2,1 2,9 5,9 1445 78
315 M2BAX 355SMB 4 3GBA352220-••M 1491 96,0 96,0 95,6 0,86 545 6,7 2018 2,3 3,0 6,9 1595 78
355 M2BAX 355SMC 4 3GBA352230-••M 1490 96,0 96,2 95,8 0,86 616 6,3 2273 2,3 2,8 7,2 1635 78

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 15

Technical data
IE3 General performance cast iron motors

IP 55 - IC 411 - Insulation class F, temperature rise class B

IE3 efficiency class according to IEC 60034-30-1; 2014
Efficiency
IEC 60034-30-1; 2014 Current Torque
Moment Sound
Full 3/4 1/2 Power of inertia pressure
Output Speed load load load factor IN TN J = 1/4 Weight Level LPA
kW Motor type Product code r/min 100% 75% 50% Cosj A IS/IN Nm TI/TN Tb/TN GD2kgm2 kg dB

1000 r/min = 6 poles 400 V 50 Hz CENELEC-design

0,18 M2BAX 71MB 6 3GBA073320-••D 931 63,9 60,0 53,2 0,69 0,6 3,8 1,87 2,1 2,6 0,00103 10 39
0,25 M2BAX 71MLA 6 3GBA073410-••D 926 68,6 66,3 60,9 0,67 0,8 4,3 2,58 2,6 2,9 0,0014 13 46
0,37 M2BAX 80MC 6 3GBA083330-••D 939 73,5 71,5 66,7 0,66 1,09 5,6 3,8 2,8 3,2 0,0024 17 42
0,55 M2BAX 80MLA 6 3GBA083410-••D 943 77,2 75,9 71,9 0,68 1,54 6,3 5,6 3,4 3,5 0,00353 23 48
0,75 M2BAX 90SLA 6 3GBA093010-••D 952 78,9 78,0 73,9 0,59 2,35 5,3 7,52 3,1 3,6 0,0044 23 50
1,1 M2BAX 90LB 6 3GBA093520-••D 954 81,0 80,3 75,5 0,62 3,2 6,1 11,12 3,3 3,9 0,00643 30 53
1,5 M2BAX 100LKA 6 3GBA103810-••D 953 82,5 82,1 80,0 0,66 4,0 5,3 15,11 2,7 3,0 0,00975 37 48
2,2 M2BAX 112MLA 6 3GBA113410-••D 957 84,3 83,8 81,5 0,64 5,94 6,5 21,95 2,9 3,7 0,013 46 50
3 M2BAX 132SMA 6 3GBA133210-••D 968 85,6 86,1 84,9 0,68 7,4 6,7 29,59 2,1 3,2 0,0291 65 48
4 M2BAX 132SMB 6 3GBA133220-••D 972 86,8 86,8 84,9 0,65 10,1 7,0 39,3 2,7 3,6 0,0343 71 52
5,5 M2BAX 132MLA 6 3GBA133410-••D 974 88,0 87,4 86,0 0,67 13,5 7,3 54,2 2,9 3,5 0,0511 97 65
7,5 M2BAX 160MLA 6 3GBA163410-••F 979 89,1 89,5 88,9 0,75 15,9 7,6 73,39 1,8 3,1 0,099 131 59
11 M2BAX 160MLB 6 3GBA163420-••F 976 90,3 91,3 91,3 0,78 22,5 7,8 108 1,9 3,0 0,134 161 57
15 M2BAX 180MLA 6 3GBA183410-••F 971 91,2 91,8 91,2 0,75 31,8 9,4 146 2,3 3,6 0,162 197 63
18,5 M2BAX 200MLA 6 3GBA203410-••F 978 91,7 92,1 91,5 0,75 38,8 6,7 180 2,1 2,8 0,207 208 64
22 M2BAX 200MLB 6 3GBA203420-••F 978 92,2 92,5 91,8 0,75 45,9 7,3 214 2,3 3,0 0,255 251 62
30 M2BAX 225SMA 6 3GBA223210-••F 988 92,9 93,3 92,7 0,79 59 8,2 290 2,9 3,3 0,592 286 63
37 M2BAX 250SMA 6 3GBA253210-••F 986 93,3 93,6 93,1 0,79 72,4 8,5 353 3,3 3,0 0,83 360 64
45 M2BAX 280SMF 6 3GBA283260-••F 990 93,7 93,9 93,5 0,82 84,5 8,0 434 3,2 2,9 1,6 524 62
55 M2BAX 280SMG 6 3GBA283270-••F 989 94,1 94,5 94,2 0,82 103 8,6 531 3,4 2,9 1,8 563 64
75 M2BAX 315SMB 6 3GBA313220-••M 994 94,6 94,9 94,6 0,84 136 6,8 720 1,8 2,6 4,1 791 75
90 M2BAX 315SMC 6 3GBA313230-••M 994 94,9 95,1 94,7 0,84 164 7,2 864 2,0 3,0 4,6 859 76
110 M2BAX 315SMD 6 3GBA313240-••M 994 95,1 95,3 95,0 0,83 200 7,3 1056 2,2 3,1 4,9 912 75
132 M2BAX 315MLB 6 3GBA313420-••M 995 95,4 95,5 95,1 0,82 242 7,3 1266 2,3 3,2 6,3 1068 72
160 M2BAX 355SMA 6 3GBA353210-••M 993 95,6 95,9 95,6 0,82 292 6,7 1538 2,5 2,6 7,9 1348 75
200 M2BAX 355SMB 6 3GBA353220-••M 993 95,8 96,2 96,1 0,82 365 6,7 1923 2,6 2,5 9,7 1512 75
250 M2BAX 355SMC 6 3GBA353230-••M 993 95,8 96,1 95,8 0,81 464 7,7 2404 3,0 3,1 11,3 1656 75

16 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Technical data
IE2 General performance cast iron motors

IP 55 - IC 411 - Insulation class F, temperature rise class B

IE2 efficiency class according to IEC 60034-30-1; 2014
Efficiency
IEC 60034-30-1; 2014 Current Torque
Moment Sound
Full 3/4 1/2 Power of inertia pressure
Output Speed load load load factor IN TN J = 1/4 Weight Level LPA
kW Motor type Product code r/min 100% 75% 50% Cosj A IS/IN Nm TI/TN Tb/TN GD2kgm2 kg dB

3000 r/min = 2 poles 400 V 50 Hz CENELEC-design

0,37 M2BAX 71MA 2 3GBA071310-••C 2797 69,5 67,4 62,7 0,78 0,91 5,3 1,24 2,9 3,6 0,00033 9 56
0,55 M2BAX 71MB 2 3GBA071320-••C 2811 74,1 72,8 69,5 0,79 1,3 5,4 1,85 3,0 3,5 0,00041 10 58
0,75 M2BAX 80MA 2 3GBA081310-••C 2843 77,4 76,3 73,7 0,81 1,71 6,2 2,51 2,9 4,3 0,00067 14 63
1,1 M2BAX 80MB 2 3GBA081320-••C 2840 79,6 79,5 77,6 0,83 2,44 6,0 3,67 3,1 3,8 0,0009 15 62
1,5 M2BAX 90SA 2 3GBA091110-••C 2887 81,3 79,9 77,1 0,79 3,37 6,5 4,93 3,0 3,9 0,0021 21 66
2,2 M2BAX 90LA 2 3GBA091510-••C 2894 83,2 83,0 81,4 0,84 4,48 7,7 7,25 3,1 3,8 0,0027 24 67
3 M2BAX 100LA 2 3GBA101510-••C 2919 84,6 83,6 81,3 0,84 6,12 8,7 9,81 4,1 5,0 0,0048 32 74
4 M2BAX 112MA 2 3GBA111310-••C 2916 85,8 85,3 83,1 0,86 7,89 9,1 13,08 4,1 4,7 0,00561 36 74
5,5 M2BAX 132SA 2 3GBA131110-••C 2921 87,0 86,0 83,7 0,85 10,8 8,3 18,02 2,6 4,3 0,0117 56 74
7,5 M2BAX 132SB 2 3GBA131120-••C 2916 88,1 87,5 85,7 0,84 14,5 8,7 24,57 3,1 4,5 0,0132 60 72
11 M2BAX 160MLA 2 3GBA161410-••C 2931 89,4 89,4 88,3 0,86 20,7 6,6 35,87 2,5 3,5 0,041 103 72
15 M2BAX 160MLB 2 3GBA161420-••C 2938 90,3 90,5 89,8 0,88 27 7,6 48,89 3,1 3,5 0,0538 116 72
18,5 M2BAX 160MLC 2 3GBA161430-••C 2939 90,9 91,0 90,3 0,87 33,4 7,9 60,1 3,1 3,8 0,06 124 73
22 M2BAX 180MLA 2 3GBA181410-••C 2943 91,3 91,6 90,9 0,87 39,5 8,6 71,4 3,7 3,9 0,0735 151 72
30 M2BAX 200MLA 2 3GBA201410-••C 2957 92,0 91,5 90,1 0,85 55,8 8,6 97,1 4,0 4,2 0,11 198 81
37 M2BAX 200MLB 2 3GBA201420-••C 2951 92,5 92,5 92,2 0,90 64,2 7,9 120 3,6 3,7 0,141 229 80
45 M2BAX 225SMA 2 3GBA221210-••C 2962 92,9 92,8 92,1 0,86 80,6 8,8 145 3,8 3,8 0,226 275 82
55 M2BAX 250SMA 2 3GBA251210-••C 2965 93,2 93,2 92,5 0,87 97,9 7,4 177 3,4 3,0 0,344 335 78
75 M2BAX 280SMD 2 3GBA281240-••H 2971 93,8 94,0 93,9 0,89 129 7,7 241 2,7 3,3 0,6 527 78
90 M2BAX 280SME 2 3GBA281250-••H 2970 94,1 94,3 94,2 0,91 152 8,0 289 3,1 3,3 0,7 576 76
110 M2BAX 315SMA 2 3GBA311210-••H 2979 94,3 94,2 93,1 0,90 187 7,6 353 2,5 3,2 0,95 790 78
132 M2BAX 315SMB 2 3GBA311220-••H 2977 94,6 94,6 93,7 0,90 224 7,7 423 2,7 3,1 1,4 840 78
160 M2BAX 315SMC 2 3GBA311230-••H 2976 94,8 95,0 94,4 0,90 269 7,7 513 2,8 3,0 1,7 900 78
200 M2BAX 315MLA 2 3GBA311410-••C 2979 95,0 94,8 93,9 0,89 341 7,2 641 2,4 3,6 2,1 1037 83
250 M2BAX 355SMA 2 3GBA351210-••C 2983 95,0 94,7 93,7 0,89 428 6,7 800 1,5 2,8 2,7 1329 83
315 M2BAX 355SMB 2 3GBA351220-••C 2980 95,0 95,0 94,2 0,89 537 7,2 1009 1,9 2,8 3,4 1469 83
355 M2BAX 355SMC 2 3GBA351230-••C 2983 95,0 95,0 94,3 0,88 609 7,4 1136 2,1 2,7 3,6 1539 83

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 17

Technical data
IE2 General performance cast iron motors

IP 55 - IC 411 - Insulation class F, temperature rise class B

IE2 efficiency class according to IEC 60034-30-1; 2014
Efficiency
IEC 60034-30-1; 2014 Current Torque
Moment Sound
Full 3/4 1/2 Power of inertia pressure
Output Speed load load load factor IN TN J = 1/4 Weight Level LPA
kW Motor type Product code r/min 100% 75% 50% Cosj A IS/IN Nm TI/TN Tb/TN GD2kgm2 kg dB

1500 r/min = 4 poles 400 V 50 Hz CENELEC-design

0,25 M2BAX 71MA 4 3GBA072310-••C 1424 68,5 65,1 58,6 0,70 0,74 4,6 1,68 2,0 2,9 0,0006 9 49
0,37 M2BAX 71MB 4 3GBA072320-••C 1417 72,7 71,6 66,6 0,72 1,03 4,9 2,49 2,5 3,1 0,00076 10 46
0,55 M2BAX 80MA 4 3GBA082310-••C 1431 77,1 77,4 74,9 0,77 1,34 5,8 3,67 2,7 3,2 0,0022 15 50
0,75 M2BAX 80MB 4 3GBA082320-••C 1446 79,6 78,8 74,9 0,69 1,99 6,6 4,97 3,7 3,9 0,00247 18 53
1,1 M2BAX 90SA 4 3GBA092110-••C 1447 81,4 79,6 75,6 0,71 2,74 6,6 7,35 3,9 4,3 0,0037 22 51
1,5 M2BAX 90LA 4 3GBA092510-••C 1444 82,8 83,1 81,3 0,73 3,6 6,8 10 3,7 4,2 0,0046 24 55
2,2 M2BAX 100LA 4 3GBA102510-••C 1445 84,3 83,8 81,5 0,77 4,93 7,3 14,54 3,2 3,9 0,00759 31 55
3 M2BAX 100LB 4 3GBA102520-••C 1443 85,5 85,2 83,4 0,77 6,61 7,6 19,8 3,8 4,3 0,00939 35 58
4 M2BAX 112MA 4 3GBA112310-••C 1442 86,6 86,2 84,6 0,78 8,62 7,5 26,5 4,0 4,3 0,012 41 56
5,5 M2BAX 132SA 4 3GBA132110-••C 1457 87,7 87,5 86,2 0,77 11,7 6,9 36 2,5 3,4 0,0257 59 65
7,5 M2BAX 132MA 4 3GBA132310-••C 1457 88,7 88,6 87,4 0,77 16 7,2 49,1 2,6 3,6 0,0319 70 67
11 M2BAX 160MLA 4 3GBA162410-••C 1466 89,8 89,9 89,2 0,78 22,8 7,0 71,5 3,3 3,2 0,078 111 66
15 M2BAX 160MLB 4 3GBA162420-••C 1468 90,6 91,1 90,5 0,81 29,5 8,0 97,7 3,2 3,7 0,1 126 66
18,5 M2BAX 180MLA 4 3GBA182410-••C 1470 91,2 91,4 90,5 0,79 36,9 8,5 120 3,6 4,2 0,12 156 65
22 M2BAX 180MLB 4 3GBA182420-••C 1472 91,6 91,3 90,2 0,77 45 9,2 143 4,1 4,5 0,139 169 66
30 M2BAX 200MLA 4 3GBA202410-••C 1476 92,3 92,4 92,0 0,81 58,4 6,8 194 3,0 3,2 0,236 222 68
37 M2BAX 225SMA 4 3GBA222210-••C 1479 92,7 92,7 92,2 0,81 70,6 7,4 239 3,1 3,3 0,35 265 69
45 M2BAX 225SMB 4 3GBA222220-••C 1481 93,1 92,9 92,3 0,80 87,2 7,9 290 3,4 3,4 0,416 292 69
75 M2BAX 280SMD 4 3GBA282240-••H 1480 94,0 94,1 93,8 0,83 138 8,4 484 3,3 3,5 0,9 520 70
90 M2BAX 280SME 4 3GBA282250-••H 1480 94,2 94,3 94,0 0,86 160 7,8 581 3,3 3,4 1,1 583 70
110 M2BAX 315SMA 4 3GBA312210-••H 1485 94,5 94,8 94,4 0,85 195 7,2 707 2,9 3,0 2,3 750 68
132 M2BAX 315SMB 4 3GBA312220-••H 1484 94,7 95,0 94,7 0,88 228 7,3 849 3,0 2,9 2,6 855 68
160 M2BAX 315SMC 4 3GBA312230-••H 1484 94,9 95,1 94,7 0,85 283 7,5 1030 3,4 3,1 2,9 900 68
200 M2BAX 315MLA 4 3GBA312410-••C 1486 95,1 95,2 94,6 0,86 356 7,0 1285 2,3 2,8 3,5 1012 78
250 M2BAX 355SMA 4 3GBA352210-••C 1488 95,1 95,1 94,2 0,85 445 6,7 1604 2,0 2,6 5,4 1419 82
315 M2BAX 355SMB 4 3GBA352220-••C 1488 95,1 95,1 94,3 0,85 560 7,3 2021 2,2 2,7 6,9 1589 82
355 M2BAX 355SMC 4 3GBA352230-••C 1487 95,1 95,3 94,7 0,86 623 6,8 2279 2,4 2,7 7,2 1669 82
355 M2BAX 355SMC 4 3GBA352230-••C 1487 95,1 95,3 94,7 0,86 623 6,8 2279 2,4 2,7 7,2 1650 82

18 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Technical data
IE2 General performance cast iron motors

IP 55 - IC 411 - Insulation class F, temperature rise class B

IE2 efficiency class according to IEC 60034-30-1; 2014
Efficiency
IEC 60034-30-1; 2014 Current Torque
Moment Sound
Full 3/4 1/2 Power of inertia pressure
Output Speed load load load factor IN TN J = 1/4 Weight Level LPA
kW Motor type Product code r/min 100% 75% 50% Cosj A IS/IN Nm TI/TN Tb/TN GD2kgm2 kg dB

1000 r/min = 6 poles 400 V 50 Hz CENELEC-design

0,18 M2BAX 71MA 6 3GBA073310-••C 905 56,6 52,3 45,2 0,72 0,64 3,5 1,84 2,2 2,6 0,00082 9 40
0,25 M2BAX 71MB 6 3GBA073320-••C 920 61,6 57,1 50,0 0,71 0,83 3,8 2,56 2,6 3,0 0,00105 10 47
0,37 M2BAX 80MA 6 3GBA083310-••C 936 67,6 66,0 60,3 0,68 1,16 4,3 3,77 2,6 3,0 0,00185 14 47
0,55 M2BAX 80MB 6 3GBA083320-••C 932 73,1 71,1 66,5 0,65 1,67 4,7 5,61 3,0 3,1 0,00267 19 47
0,75 M2BAX 90SA 6 3GBA093110-••C 951 75,9 73,3 68,2 0,60 2,36 4,9 7,6 3,3 3,7 0,0044 22 50
1,1 M2BAX 90LA 6 3GBA093510-••C 936 78,1 76,5 73,0 0,65 3,17 4,6 11,06 3,0 3,3 0,0051 25 48
1,5 M2BAX 100LA 6 3GBA103510-••C 957 79,8 78,1 74,0 0,63 4,36 5,7 15 2,6 3,3 0,00795 31 56
2,2 M2BAX 112MA 6 3GBA113310-••C 956 81,8 80,4 77,6 0,66 5,92 5,5 21,9 2,8 3,5 0,0116 40 54
3 M2BAX 132SA 6 3GBA133110-••C 966 83,3 82,6 80,8 0,64 8,09 5,6 29,43 1,9 3,0 0,0251 57 62
4 M2BAX 132MA 6 3GBA133310-••C 964 84,6 84,3 82,7 0,69 9,95 6,4 39,76 2,7 3,3 0,0294 65 59
5,5 M2BAX 132MB 6 3GBA133320-••C 964 86,0 85,9 84,6 0,66 14 5,8 54,2 2,2 2,9 0,0397 79 62
7,5 M2BAX 160MLA 6 3GBA163410-••C 974 87,2 87,5 86,9 0,74 16,4 6,6 73,7 2,0 3,2 0,0811 114 65
11 M2BAX 160MLB 6 3GBA163420-••C 971 88,7 89,3 89,7 0,78 22,9 6,6 108 1,3 2,8 0,102 134 57
15 M2BAX 180MLA 6 3GBA183410-••C 971 89,7 90,0 89,6 0,76 32 7,4 147 2,4 3,9 0,136 169 62
18,5 M2BAX 200MLA 6 3GBA203410-••C 978 90,4 90,7 90,0 0,76 38,5 6,1 181 2,0 2,9 0,204 205 61
22 M2BAX 200MLB 6 3GBA203420-••C 978 90,9 91,1 90,5 0,76 45,6 6,2 215 1,8 2,9 0,227 219 62
30 M2BAX 225SMA 6 3GBA223210-••C 987 91,7 91,5 90,5 0,78 60,6 7,0 290 2,7 3,2 0,579 284 64
37 M2BAX 250SMA 6 3GBA253210-••C 986 92,2 92,5 91,9 0,80 71,9 6,9 359 2,6 2,9 0,783 337 66
45 M2BAX 280SMD 6 3GBA283240-••H 990 92,7 92,8 92,4 0,80 88,2 7,1 434 2,7 3,1 1,3 498 62
55 M2BAX 280SME 6 3GBA283250-••H 989 93,1 93,2 92,8 0,81 105 6,9 531 2,7 2,9 1,5 523 66
75 M2BAX 315SMA 6 3GBA313210-••C 992 93,7 93,7 92,6 0,81 143 7,0 721 2,1 2,7 3,2 722 75
90 M2BAX 315SMB 6 3GBA313220-••C 992 94,0 94,1 93,2 0,83 165 7,2 866 2,1 2,7 4,1 817 75
110 M2BAX 315SMC 6 3GBA313230-••C 992 94,3 94,4 93,7 0,83 203 7,0 1058 2,2 2,7 4,9 887 75
132 M2BAX 315MLA 6 3GBA313410-••C 992 94,6 94,7 94,0 0,83 243 7,2 1270 2,4 2,7 5,8 997 75
160 M2BAX 355SMA 6 3GBA353210-••C 992 94,8 94,9 94,2 0,83 293 6,2 1540 2,1 2,3 7,3 1309 77
200 M2BAX 355SMB 6 3GBA353220-••C 992 95,0 95,2 94,6 0,84 360 6,5 1925 2,1 2,3 9,7 1459 77
250 M2BAX 355SMC 6 3GBA353230-••C 991 95,0 95,2 94,8 0,84 450 6,7 2409 2,3 2,3 11,3 1609 77

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 19

Variant codes
General performance cast iron motors

Variant codes specify additional options and features to the standard motor. Most of the variant codes apply to IE2 and IE3 motors. For details please
The desired features are listed as three-digit variant codes in the motor contact you ABB sales office before making an order.
order. Note also that there are variants that cannot be used together.

Frame size

Code/Variants M2BAX 71 80 90 100 112 132 160 180 200 225 250 280 315 355
Administration
531 Sea freight packing ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Bearings and Lubrication
037 Roller bearing at D-end. - - - - - - ● ● ● ● ● ● ● ●
041 Bearings regreasable via grease nipples. - - - - - ● ● ● ● ● ● ○ ○ ○
043 SPM compatible nipples for vibration measurement - - - - - - ● ● ● ● ● ● ● ●
188 63-series bearing in D-end - - - - - - ● ● ● ● ● ○ - -
Branch standard designs
178 Stainless steel / acid proof bolts. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Cooling system
068 Light alloy metal fan ● ● ● ● ● ● ● ● ● ● ● ● ● ●
183 Separate motor cooling (fan axial, N-end). ● ● ● ● ● ● ● ● ● ● ● ● ● -
Drain holes
065 Plugged existing drain holes. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Heating elements
450 Heating element, 100-120 V ● ● ● ● ● ● ● ● ● ● ● ● ● ●
451 Heating element, 200 - 240 V ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Marine
096 Fulfilling Lloyds Register of Shipping (LR) requirements, without certificate ● ● ● ● ● ● ● ● ● ● ● ● ● ●
(non-essential duty only)
186 Fulfilling Det Norske Veritas (DNV) requirements, without certificate ● ● ● ● ● ● ● ● ● ● ● ● ● ●
492 Fulfilling Registro Italiano Navale (RINA) requirements, without certificate. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
496 Fulfilling Bureau Veritas (BV) requirements, without certificate(non-essential ● ● ● ● ● ● ● ● ● ● ● ● ● ●
duty only)
675 Fulfilling American Bureau of Shipping (ABS) requirements, without ● ● ● ● ● ● ● ● ● ● ● ● ● ●
certificate (non-essential duty only)
676 Fulfilling Germanischer Lloyd (GL) requirements, without certificate (non- ● ● ● ● ● ● ● ● ● ● ● ● ● ●
essential duty only)
Mounting arrangements
008 IM 2101 foot/flange mounted, IEC flange, from IM 1001 (B34 from B3). ● ● ● ● ● ● - - - - - - - -
009 IM 2001 foot/flange mounted, IEC flange, from IM 1001 (B35 from B3). ● ● ● ● ● ● ● ● ● ● ● ● ● ●
047 IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5). ● ● ● ● ● ● - - - - - - - -
048 IM 3001 flange mounted, IEC flange, from IM 3601 (B5 from B14). ● ● ● ● ● ● - - - - - - - -
066 Modified for specified mounting position differing from IM B3 (1001), IM B5 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
(3001), B14 (3601), IM B35 (2001), IM B34 (2101)
Painting
114 Special paint color, standard grade ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Protection
005 Protective roof ● ● ● ● ● ● ● ● ● ● ● ● ● ●
072 Radial seal at D-end. Not possible for 2-pole , 280 and 315 frames ● ● ● ● ● ● ● ● ● ● ● ● ● ●
158 Degree of protection IP65. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
403 Degree of protection IP56. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
784 Gamma-seal at D-end. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Rating & instruction plates
002 Restamping voltage, frequency and output, continuous duty. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
095 Restamping output (maintained voltage, frequency), intermittent duty. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
135 Mounting of additional identification plate, stainless. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
159 Additional plate with text “Made in ....” - - - - - ● ● ● ● ● ● ● ● ●

○ = Included as standard │ ● = Available as option │ - = Not applicable

20 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

 Frame size

Code/Variants M2BAX 71 80 90 100 112 132 160 180 200 225 250 280 315 355
161 Additional rating plate delivered loose. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
163 Frequency converter rating plate. Rating data according to quotation. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
181 Rating plate with ABB standard loadability values for VSD operation. Other ● ● ● ● ● ● ● ● ● ● ● ● ● ●
auxiliaries for VSD operation to be selected as necessary.
818 Restamping as generator - - - - - - ● ● ● ● ● ● ● ●
Shaft & rotor
131 Motor delivered with half key (key not exceeding shaft diameter) - - - - - - ● ● ● ● ● - - -
Standards and Regulations
331 IE1 motor not for sale for use in EU ● ● ● ● ● ● ● ● ● ● ● ● ● ●
540 China energy label ● ● ● ● ● ● ● ● ● ● ● ● ● ●
548 Certificate of conformity according TR-CU 004/2011 for customs union RU, ● ● ● ● ● ● ● ● ● ● ● ● ● ●
KZ, BY, AM, KG.
822 WIMES 3.03i6 Compliant Design for DOL operation ● ● ● ● ● ● ● ● ● ● ● ● ● ●
823 WIMES 3.03i6 Compliant Design for VSD operation ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Stator winding temperature sensors
122 Bimetal detectors, break type (NCC), (3 in series), 150 ºC, in stator winding ● ● ● ● ● ● ● ● ● ● ● ● ● ●
435 PTC - thermistors (3 in series), 130 ºC, in stator winding ● ● ● ● ● ● ● ● ● ● ● ● ● ●
439 PTC - thermistors (2x3 in series), 150 ºC, in stator winding ● ● ● ● ● ● ● ● ● ● ● ● ● ●
445 Pt100 2-wire in stator winding, 1 per phase ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Terminal box
022 Cable entry LHS (seen from D-end). ● ● ● ● ● ● ● ● ● ● ● ● ● ●
230 Standard metal cable gland. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
375 Standard plastic cable gland ● ● ● ● ● ● ● ● ● ● ● - - -
376 Two standard plastic cable glands ● ● ● ● ● ● ● ● ● ● ● - - -
400 4 x 90 degr turnable terminal box. ● ● ● ● ● ● ○ ○ ○ ○ ○ ○ ○ ○
418 Separate terminal box for auxiliaries, standard material. ● ● ● ● ● ● ● ● ● ● ● - - -
447 Top mounted separate terminal box for monitoring equipment. - - - - - - - - - - - ● ● ●
468 Cable entry from D-end. - - - - - - - - - - - ● ● ●
731 Two standard metal cable glands. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Testing
145 Type test report from a catalogue motor, 400V 50Hz. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
148 Routine test report. ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Variable speed drives
470 Prepared for hollow shaft pulse tacho (L&L equivalent). - - - - - - ● ● ● ● ● - - -
472 1024 pulse tacho (L&L 861007455-1024). - - - - - - ● ● ● ● ● - - -
473 2048 pulse tacho (L&L 861007455-2048). - - - - - - ● ● ● ● ● - - -
701 Insulated bearing at N-end. - - - - - - - - - - - ● ● ●
704 EMC cable entry. ● ● ● ● ● ● ● ● ● ● ● ● ● ●

○ = Included as standard │ ● = Available as option │ - = Not applicable

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 21

Mechanical design
Bearings

General performance motors are normally fitted

with single-row deep-groove ball bearings, as
shown in the table below.

If the bearing at the D-end is replaced with a roller

bearing (NU- or NJ-), higher radial forces can be
handled. Roller bearings are suitable for belt-drive
applications and can be ordered with variant code
037.

Standard and alternative designs

Standard design Alternative design

Deep groove ball bearings

Deep groove ball bearings Roller bearings (VC037)

Motor size Poles D-end N-end D-end

71 2-6 6203-2Z/C3 6202-2Z/C3
80 2-6 6204-2Z/C3 6203-2Z/C3
90 2-6 6205-2Z/C3 6204-2Z/C3
100 2-6 6206-2Z/C3 6205-2Z/C3
112 2-6 6206-2Z/C3 6205-2Z/C3
132 2-4 6208-2Z/C3 6208-2Z/C3 NU 208 ECP/C3
160 2-6 6209-2Z/C3 6209-2Z/C3 NU 209 ECP/C3
180 2-6 6210-2Z/C3 6209-2Z/C3 NU 210 ECP/C3
200 2-6 6212-2Z/C3 6209-2Z/C3 NU 212 ECP/C3
225 2-6 6213-2Z/C3 6210-2Z/C3 NU 213 ECP/C3
250 2-6 6215-2Z/C3 6212-2Z/C3 NU 215 ECP/C3
280 2-6 6316/C3 6316/C3 NU 316 ECP/C3
315 IE2, IE3 2 6217/C3 6217/C3 NU 217 ECP/C3
315 IE2, IE3 4-6 6219/C3 6217/C3 NU 219 ECP/C3
355 IE2, IE3 2 6219/C3 6219/C3 NU 219 ECP/C3
355 IE2, IE3 4-6 6222/C3 6219/C3 NU 222 ECP/C3

Axially-locked bearings
All motors are equipped as standard with an axially
locked bearing at the D-end.

22 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Mechanical design
Radial forces

Permissible loading on the shaft

The following table shows permissible radial
forces on the shaft in Newtons, assuming zero
axial force, a 25 °C ambient temperature, and
normal conditions. The values are given for a
calculated bearing life of 20 000 and 40 000 hours
per motor size.

These calculated values further assume mounting

position IM B3 (foot-mounted), with force directed
sideways. In some cases, the strength of the shaft
affects permissible forces.

Permissible loads of simultaneous radial and axial

forces can be supplied on request.

If the radial force is applied between points X0 and

Xmax, the permissible force FR can be calculated
with the following formula:

X
FR = F X0 - (FX0 - F Xmax )
E

Where:
E: length of the shaft extension in the standard version

FR X

F Xmax F X0

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 23

 Permissible radial forces

Lenght Ball bearings Roller bearings

of shaft
20,000 h 40,000 h 20,000 h 40,000 h
extension
Motor size Poles E (mm) FX0(N) FXmax(N) FX0(N) FXmax(N) FX0(N) FXmax(N) FX0(N) FXmax(N)
71 2 30 545 465 430 370
4 30 685 585 545 465
6 30 785 660 620 530
80 2 40 740 620 585 490
4 40 925 775 730 615
6 40 1065 890 840 705
90S 2 50 795 645 625 510
4 50 1000 815 790 645
6 50 1145 935 905 740
90L 2 50 795 660 630 520
4 50 1005 830 790 655
6 50 1150 950 910 750
100 2 60 1110 895 875 705
4 60 1395 1120 1100 885
6 60 1605 1290 1265 1020
112 2 60 1120 925 885 730
4 60 1405 1160 1105 915
6 60 1615 1335 1275 1050
132S 2 80 1630 1270 1285 1000
4 80 2055 1600 1620 1260
6 80 2360 1840 1860 1450
132M 4 80 2075 1665 1630 1310
6 80 2375 1905 1865 1495
160 2 110 1945 1510 1545 1195
4 110 2455 1905 1945 1510
6 110 2835 2250 2245 1780
180 2 110 2095 1705 1660 1350
4 110 2640 2145 2090 1700
6 110 3025 2460 2395 1950
200 2 110 2800 2350 2200 1830
4 110 3550 2910 2810 2305
6 110 4065 3335 3220 2640
225 2 110 3335 2795 2640 2215
4 140 4200 3370 3325 2670
6 140 4810 3860 2805 3055
250 2 140 3965 3220 3140 2550
4 140 4995 4060 3995 3215
6 140 5715 4645 4525 3675
280 2 140 6590 5500 5100 4250 22700 7200 18350 7200
4 140 8310 6930 6430 5360 27900 9500 22550 9500
6 140 9460 7890 7310 6090 31550 9500 25450 9500
315 2 140 4900 4150 3850 3250 14900 6650 12100 6650
IE2, IE3 4 170 8000 6650 6350 5250 21200 10350 17200 10350
6 170 9150 7550 7200 5950 23900 10250 19400 10250
355 2 140 6250 5500 4900 4300 17200 7850 13950 7850
IE2, IE3 4 210 10500 8700 8250 6800 28050 16250 22750 16250
6 210 12000 9900 9400 7750 31650 16200 25700 16200

24 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Mechanical design
Axial forces

The following tables present permissible axial

01 Mounting arrange-
ment IM B3. forces on the shaft in Newtons, assuming zero
radial force, a 25 °C ambient temperature, and
normal conditions. The values are given for a
calculated bearing life of 20,000 and 40,000 hours
per motor size.

At 60 Hz, the values must be reduced by 10

percent, and for two-speed motors, the higher
speed determines permissible axial force.
Permissible loads of simultaneous radial and axial
forces can be supplied on request.

For axial force FAD, it is assumed that the D-bearing

is locked with a locking ring.

FAZ 
FAD 

__  
FAD FAZ
01

Permissible axial forces

Mounting arrangement IM B3

Length of Deep groove ball bearings

shaft
20,000 h 40,000 h
Motor extension
size Poles E (mm) FAD(N) FAZ(N) FAD(N) FAZ(N)
71 2 30 580 300 465 185
4 30 725 445 580 300
6 30 810 530 670 390
80 2 40 750 430 595 275
4 40 940 620 750 430
6 40 1055 735 870 550
90 2 50 845 445 675 275
4 50 1050 650 840 440
6 50 1175 775 935 535
100 2 60 1175 615 940 380
4 60 1465 905 1175 615
6 60 1640 1080 1305 745
112 2 60 1175 615 935 375
4 60 1460 900 1170 610
6 60 1635 1075 1300 740

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 25

 Permissible axial forces
Mounting arrangement IM B3

Deep groove ball bearings

Length of shaft
20,000 h 40,000 h
Motor extension
size Poles E (mm) FAD(N) FAZ(N) FAD(N) FAZ(N)
132 2 80 1675 795 1415 535
4 80 2110 1230 1665 785
6 80 2450 1570 1950 1070
160 2 110 1665 1205 1300 840
4 110 2135 1675 1650 1190
6 110 2465 2005 1895 1435
180 2 110 1730 1275 1345 890
4 110 2215 1755 1705 1245
6 110 2590 2130 1990 1530
200 2 110 2240 1780 1725 1265
4 110 2900 2445 2215 1755
6 110 3400 2945 2595 2135
225 2 110 2440 2210 1845 1615
4 140 3195 2965 2395 2170
6 140 3745 3520 2810 2580
250 2 140 2860 2620 2155 1920
4 140 3765 3525 2825 2585
6 140 4420 4180 3310 3070
280 2 140 6060 4060 4530 2530
4 140 7380 5380 6010 4010
6 140 8850 6850 6710 4710
315 2 140 4150 2150 3300 1300
IE2, IE3 4 170 6600 4600 5100 3100
6 170 7550 5550 5800 3800
355 2 140 4900 3200 3800 2100
IE2, IE3 4 210 8050 6300 6100 4350
6 210 9250 7500 6950 5200

26 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Terminal box
Standard terminal box

Terminal boxes
01 Terminal box for
sizes 71 to 132.
The pictures below show standard terminal boxes.
02 Terminal box for
sizes 160 to 180.

03 Terminal box for

sizes 200 to 250.

04 Terminal box for

sizes 280 to 355.

05 Terminal board for

sizes 71 to 132.

06 Terminal board for

sizes 160 to 180.

07 Terminal board for

sizes 200 to 250.
__ __
08 Terminal board for
sizes 280 to 355.
01 05

__ __
02 06

__ __
03 07

__ __
04 08

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 27

Dimension drawings
General performance IE3 cast iron motors

Foot-mounted motor IM1001, B3 and flange-mounted motor IM3001, B5

D GA F E L max
poles poles poles poles poles HD
A B B’ C K M N P S
max
Motor size 2 4-8 2 4-8 2 4-8 2 4-8 2 4-8
71M 14 14 16 16 5 5 30 30 257 257 112 90 - 45 175 7 130 110 160 10
71ML 14 14 16 16 5 5 30 30 282 282 112 90 - 45 175 7 130 110 160 10
80M 19 19 21,5 21,5 6 6 40 40 309 309 125 100 - 50 192 10 165 130 200 12
80ML 19 19 21,5 21,5 6 6 40 40 334 334 125 100 112 50 192 10 165 130 200 12
90S 24 24 27 27 8 8 50 50 335 335 140 100 - 56 217 10 165 130 200 12
90SL 24 24 27 27 8 8 50 50 351 351 140 100 125 56 217 10 165 130 200 12
90L_ 24 24 27 27 8 8 50 50 386 386 140 125 - 56 217 10 165 130 200 12
100L_ 28 28 31 31 8 8 60 60 376 376 160 140 - 63 240 12 215 180 250 14,5
100LK_ 28 28 31 31 8 8 60 60 411 411 160 140 160 63 240 12 215 180 250 14,5
112M_ 28 28 31 31 8 8 60 60 411 411 190 140 - 70 252 12 215 180 250 14,5
112ML_ 28 28 31 31 8 8 60 60 456 456 190 140 159 70 252 12 215 180 250 14,5
132S_ 38 38 41 41 10 10 80 80 521 521 216 140 178 89 302 12 265 230 300 14,5
132M_ 38 38 41 41 10 10 80 80 586 586 216 178 203 89 302 12 265 230 300 14,5
160 1) 42 42 45 45 12 12 110 110 586,5 586,5 254 210 254 108 413 14,5 300 250 350 18,5
160 2) 42 42 45 45 12 12 110 110 626,5 626,5 254 210 254 108 413 14,5 300 250 350 18,5
160 3) 42 42 45 45 12 12 110 110 683,5 683,5 254 210 254 108 413 14,5 300 250 350 18,5
180 4) 48 48 51.5 51.5 14 14 110 110 683,5 683,5 279 241 279 121 434 14,5 300 250 350 18,5
180 5) 48 48 51.5 51.5 14 14 110 110 743,5 743,5 279 241 279 121 434 14,5 300 250 350 18,5
200 MLA6 55 55 59 59 16 16 110 110 728 728 318 267 305 133 473 18,5 350 300 400 18,5
200 6) 55 55 59 59 16 16 110 110 828 828 318 267 305 133 473 18,5 350 300 400 18,5
225 SM_ 55 60 59 64 16 18 110 140 824 854 356 286 311 149 539 18,5 400 350 450 18,5
250 SMA 60 65 64 69 18 18 140 140 882 927 406 311 349 168 585 24 500 450 550 18,5
280 65 75 69 79.5 18 20 140 140 1012 1012 457 368 419 190 775 24 500 450 550 18,5
315 SM_ 65 80 69 85 18 22 140 170 1216 1246 508 406 457 216 849 28 600 550 660 24
315 ML_ 65 90 69 95 18 25 140 170 1326 1356 508 457 508 216 849 28 600 550 660 24
355 SM_ 70 100 74.5 106 20 28 140 210 1399 1469 610 500 560 254 933 35 740 680 800 24
1)
MLA 2, MLB 2
2)
MLA 4, MLA 6 IMB14 (IM3601)
3)
MLC 2, MLB 4, MLB 6
4)
MLA 2, MLA 4 Motor size M N P S T
5)
MLB 4, MLA 6 71 85 70 105 6 2.5
6)
All types except MLA6 80 100 80 120 6 3
90 115 95 140 8 3
100 130 110 160 8 3.5
112 130 110 160 8 3.5
132 165 130 200 10 3.5

28 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Dimension drawings
General performance IE2 cast iron motors

Foot-mounted motor IM1001, B3 and flange-mounted motor IM3001, B5

D GA F E L max
poles poles poles poles poles HD
A B B’ C K M N P S
max
Motor size 2 4-8 2 4-8 2 4-8 2 4-8 2 4-8
71M 14 14 16 16 5 5 30 30 257 257 112 90 - 45 175 7 130 110 160 10
71ML 14 14 16 16 5 5 30 30 282 282 112 90 - 45 175 7 130 110 160 10
80M 19 19 21,5 21,5 6 6 40 40 309 309 125 100 - 50 192 10 165 130 200 12
80ML 19 19 21,5 21,5 6 6 40 40 334 334 125 100 112 50 192 10 165 130 200 12
90S 24 24 27 27 8 8 50 50 335 335 140 100 - 56 217 10 165 130 200 12
90SL 24 24 27 27 8 8 50 50 351 351 140 100 125 56 217 10 165 130 200 12
90L 24 24 27 27 8 8 50 50 351 351 140 125 - 56 217 10 165 130 200 12
100L 28 28 31 31 8 8 60 60 376 376 160 140 - 63 240 12 215 180 250 14,5
100LK 28 28 31 31 8 8 60 60 411 411 160 140 160 63 240 12 215 180 250 14,5
112M 28 28 31 31 8 8 60 60 411 411 190 140 - 70 252 12 215 180 250 14,5
112ML 28 28 31 31 8 8 60 60 456 456 190 140 159 70 252 12 215 180 250 14,5
132S 38 38 41 41 10 10 80 80 479 479 216 140 - 89 302 12 265 230 300 14,5
132SM 38 38 41 41 10 10 80 80 521 521 216 140 178 89 302 12 265 230 300 14,5
132M 38 38 41 41 10 10 80 80 521 521 216 178 - 89 302 12 265 230 300 14,5
132ML 38 38 41 41 10 10 80 80 586 586 216 178 203 89 302 12 265 230 300 14,5
160 1) 42 42 45 45 12 12 110 110 586,5 586,5 254 210 254 108 414 14,5 300 250 350 18,5
160 2) 42 42 45 45 12 12 110 110 626,5 626,5 254 210 254 108 414 14,5 300 250 350 18,5
180 48 48 51.5 51.5 14 14 110 110 683,5 683,5 279 241 279 121 454 14,5 300 250 350 18,5
200 55 55 59 59 16 16 110 110 728 728 318 267 305 133 515 18,5 350 300 400 18,5
225 55 60 59 64 16 18 110 140 824 854 356 286 311 149 560 18,5 400 350 450 18,5
250 60 65 64 69 18 18 140 140 882 882 406 311 349 168 613 24 500 450 550 18,5
280 65 75 69 79.5 18 20 140 140 1012 1012 457 368 419 190 710 24 500 450 550 18,5
315 SM_ 65 80 69 85 18 22 140 170 1216 1246 508 406 457 216 849 28 600 550 660 24
315 ML_ 65 90 69 95 18 25 140 170 1326 1356 508 457 508 216 849 28 600 550 660 24
355 SM_ 70 100 74.5 106 20 28 140 210 1399 1469 610 500 560 254 933 35 740 680 800 24
1)
All types except MLB6
2)
MLB 6

IMB14 (IM3601)
Motor size M N P S T
71 85 70 105 6 2.5
80 100 80 120 6 3
90 115 95 140 8 3
100 130 110 160 8 3.5
112 130 110 160 8 3.5
132 165 130 200 10 3.5

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 29

Motors in brief
Cast iron motors, sizes 71 - 112

Motor size M2BAX 71 80 90 100 112

Stator and end shields Material Cast iron
Paint color shade Munsell blue 8B 4.5/3.25
Corrosion class C3
Feet Material Integrated cast iron
Bearings D-end 6203-2Z/C3 6204-2Z/C3 6205-2Z/C3 6206-2Z/C3 6206-2Z/C3
N-end 6202-2Z/C3 6203-2Z/C3 6204-2Z/C3 6205-2Z/C3 6205-2Z/C3
Axially locked bearings Locked at D-end with retaining ring
Bearing seals D-end V-ring
N-end V-ring
Lubrication Permanently lubricated shielded bearings
Measuring nipples for Not Included
condition monitoring of the
bearings
Rating plate Material Stainless steel
Terminal box Cover, material Steel
Corrosion class C3
Cover screws Zinc-electroplated steel
Connections Threaded openings 2xM16, 1xM16 2xM25, 1xM16 2xM32, 1xM16
Max Cu-area mm 4 6 10
Terminals 6 terminals for connection with cable lugs (not included)
Cable glands Glands as option
Fan Material Glass-fiber reinforced polypropylene
Fan cover Material Steel
Paint color shade Munsell blue 8B 4.5/3.25
Corrosion class C3
Stator winding Material Copper
Insulation Insulation class F. Temperature rise class B unless otherwise stated.
Winding protection 3 PTC thermistors, 150°C
Rotor winding Material Pressure die-cast aluminum
Balancing method Half key balancing as standard
Key ways Open key way
Drain holes Drain holes with closable plastic plugs, open on delivery
Enclosure IP 55 Higher protection on request
Cooling method IC 411
Lifting lugs Integrated cast iron lifting lugs

30 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

Motors in brief
Cast iron motors, sizes 132 - 250

Motor size M2BAX 132 160 180 200 225 250

Stator and end shields Material Cast iron
Paint color shade Munsell blue 8B 4.5/3.25
Corrosion class C3
Feet Material Integrated cast iron feet
Bearings D-end 6208-2Z/C3 6209-2Z/C3 6210-2Z/C3 6212-2Z/C3 6213-2Z/C3 6215-2Z/C3
N-end 6208-2Z/C3 6209-2Z/C3 6209-2Z/C3 6209-2Z/C3 6210-2Z/C3 6212-2Z/C3
Axially locked bearings Locked at D-end Locked at D-end with inner bearing cover
with retaining
ring
Bearing seals D-end V-ring
N-end V-ring
Lubrication Permanently lubricated shielded bearings
Measuring nipples for Not Included
condition monitoring of the
bearings
Rating plate Material Stainless steel
Terminal box Cover, material Steel
Corrosion class C3
Cover screws Zinc-electroplated steel
Connections Threaded openings 2xM32 2xM40, 1xM16 2xM63, 1xM16
Terminals 6 terminals for connection with cable lugs (not included)
Cable glands Glands as option Cable flange included, glands as option
Fan Material Glass-fiber reinforced polypropylene
Fan cover Material Steel
Paint color shade Munsell blue 8B 4.5/3.25
Corrosion class C3
Stator winding Material Copper
Insulation Insulation class F. Temperature rise class B unless otherwise stated.
Winding protection 3 PTC thermistors, 150 °C
Rotor winding Material Pressure die-cast aluminum
Balancing method Half-key balancing as standard
Key ways Open key way
Drain holes Drain holes with closable plastic plugs, open on delivery
Enclosure IP 55 Higher protection on request
Cooling method IC 411
Lifting lugs Integrated cast iron lifting lug

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 31

Motors in brief
Cast iron motors, sizes 280 - 355

Motor size M2BAX 280 315 355

Stator and end shields Material Cast iron
Paint color shade Munsell blue 8B 4.5/3.25
Corrosion class C3
Feet Integrated cast iron
Bearings D-end 2-pole 6316/C3 6217/C3 or 6316/C3 6219/C3 or 6319/C3
D-end 4-6 -pole 6316/C3 6219/C3 or 6316/C3 6222/C3 or 6322/C3
N-end 2-pole 6316/C3 6217/C3 or 6316/C3 6219/C3 or 6316/C3
N-end 4-6 -pole 6316/C3 6217/C3 or 6316/C3 6219/C3 or 6316/C3
Axially locked bearings Locked at D-end with inner bearing cover
Bearing seals D-end V-ring
N-end V-ring
Lubrication Regreasable bearings, regreasing nipples M6x1
Measuring nipples for condition Not included
monitoring of the bearings

Rating plate Material Stainless steel

Terminal box Material frame Cast iron
Cover Cast iron terminal box cover
Corrosion class C3
Screws Zinc-electroplated steel
Connections Threaded openings 2xM63, 2 x M20 2xM63, 2 x M20 2xM75, 2 x M20
Terminals 6 terminals for connection with cable lugs (not included)
Cable glands Cable glands as option
Fan Material Glass-fiber reinforced polpypropylene
Fan cover Material Steel fan cover
Paint color shade Black / Munsell blue 8B 4.5/3.25
Corrosion class C3
Stator winding Material Copper
Insulation Insulation class F. Temperature rise class B unless otherwise stated.
Winding protection 3 PTC thermistors, 150 °C
Rotor winding Material Pressure diecast aluminum
Balancing method Half key balancing as standard
Keyway Open key way
Heating elements On request 60 W 2x60 W 2x60 W
Enclosure IP 55 Higher protection on request
Cooling method IC 411
Drain holes Drain holes with closable plastic plugs, open on delivery
Lifting lugs Bolted lifting lugs

32 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 33
Total product offering
Motors, generators and mechanical power
transmission products with a complete portfolio of
services

IEC motors Generators

– Low voltage motors – Generators for wind turbines
– High voltage induction and synchronous – Generators for diesel and gas engine
motors power plants
– Marine motors – Generators for steam and gas turbine
– Motors for explosive atmospheres power plants
– Motors for food and beverage – Generators for marine applications
– Motors for variable speed drives – Generators for industrial applications
– Permanent magnet motors – Generators for traction applications
– Synchronous reluctance motors – Synchronous condensers for reactive power
– Traction motors compensation

NEMA motors Mechanical power transmission components,

– Low voltage motors bearings, gearings
– High voltage induction and synchronous – Mounted bearings
motors – Enclosed gearing
– Marine motors – Mechanical drive components
– Motors for explosive atmospheres – Couplings
– Motors for variable speed drives – Sheaves and bushings
– Permanent magnet motors – Conveyor components
– Servomotors – Geared motor units
– Washdown motors
Life cycle services

34 9AKK108196EN 10-2021 | ABB IEC LV MOTORS

ABB’s portfolio of drives
Optimal solution for you

Being able to rely on the continuous high Our portfolio offers low-voltage AC and DC drives,
performance and efficiency of your operations medium-voltage AC drives, and motion control
is something you want to take for granted. ABB drives spanning the fractional-kilowatt to multi-
variable-frequency drives are made with all this megawatt power level. There is a drive available
in mind, established upon more than 40 years of for essentially every industry and application,
experience and backed by a broad range of life which can be used with all types of motors, in
cycle services. environments ranging from clean electrical rooms
in buildings, to harsh coal mines and windy
ABB drives help you to optimize your processes offshore platforms. This wide product range
and systems with state-of-the-art motor allows you to select the best-fitting drive solution,
control technology, resulting in increased providing maximum reliability and efficiency for
energy efficiency, better product quality, and every need.
reduced operating costs with higher output, less
downtime, and reduced need for maintenance.
All ABB drives are designed for easy selection,
ordering, installation and use, and they offer
integrated safety features, giving you more time to
focus on what matters for you and your business.

ABB IEC LV MOTORS | 9AKK108196 EN 10-2021 35

Contact us

For more information and contact details:

www.abb.com/motors&generators

9AKK108196 EN 10-2021

© Copyright 2021 ABB. All rights reserved.

Specifications subject to change without notice.