Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 153 views

    Bosch Edc17cv54 Irom Tc1767 Allbrand

    Uploaded by

    sharya775
    This document provides instructions for connecting the Bosch EDC17CV44/54/56 ECUs to the New Trasdata plugin for programming. It describes using either a direct connection with the F32GN037C/D cable connected to the BOOT and CNF1 pins, or connecting through a metal positioning frame adapter (F34DM011) with the boot switch in the ON position and a third wire soldered to the CNF1 clamp. Proper use of the specified cables and adapters is emphasized for correct communication with the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bosch Edc17cv54 Irom Tc1767 Allbrand

    Uploaded by

    sharya775
    153 views5 pages
    This document provides instructions for connecting the Bosch EDC17CV44/54/56 ECUs to the New Trasdata plugin for programming. It describes using either a direct connection with the F32GN037C/D cable connected to the BOOT and CNF1 pins, or connecting through a metal positioning frame adapter (F34DM011) with the boot switch in the ON position and a third wire soldered to the CNF1 clamp. Proper use of the specified cables and adapters is emphasized for correct communication with the ECU.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for connecting the Bosch EDC17CV44/54/56 ECUs to the New Trasdata plugin for programming. It describes using either a direct connection with the F32GN037C/D cable connected to the BOOT and CNF1 pins, or connecting through a metal positioning frame adapter (F34DM011) with the boot switch in the ON position and a third wire soldered to the CNF1 clamp. Proper use of the specified cables and adapters is emphasized for correct communication with the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    153 views5 pages

    Bosch Edc17cv54 Irom Tc1767 Allbrand

    Uploaded by

    sharya775
    This document provides instructions for connecting the Bosch EDC17CV44/54/56 ECUs to the New Trasdata plugin for programming. It describes using either a direct connection with the F32GN037C/D cable connected to the BOOT and CNF1 pins, or connecting through a metal positioning frame adapter (F34DM011) with the boot switch in the ON position and a third wire soldered to the CNF1 clamp. Proper use of the specified cables and adapters is emphasized for correct communication with the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    BOSCH EDC17CV44_54_56 IROM TC1767 ALLBRAND

    1 BOSCH EDC17CV44/54/56 IROM TC1767


    ALLBRAND

    1.1 PLUGIN The below instructions apply


    to the following ECUs:
    ECU Brand ECU Model New Trasdata Plugin
    BOSCH EDC17CV54 0402
    BOSCH EDC17CV56 0436
    BOSCH EDC17CV54 0572
    BOSCH EDC17CV54 0656
    BOSCH EDC17CV44 0738
    BOSCH EDC17CV54 0943

    https://ecu.design
    BOSCH EDC17CV44_54_56 IROM TC1767 ALLBRAND

    1.2 CONNECTIONS

    1.2.1 DIRECT CONNECTION

    ATTENTION

    After making all the connections, connect a stabilized power supply to the New Trasdata and make sure
    that the POWER LED (red) is on.

    To communicate correctly with the control unit, it is necessary to use the F32GN037C/D cable.

    WIRE COLOUR DESCRIPTION


    Red +12 V
    Black GND
    Green CAN L
    White CAN H
    Grey BOOT
    Blue CNF1

    https://ecu.design
    BOSCH EDC17CV44_54_56 IROM TC1767 ALLBRAND

    Connect the BOOT and CNF1 pins to the grey and blue wires of the cable F32GN037C/D .

    https://ecu.design
    BOSCH EDC17CV44_54_56 IROM TC1767 ALLBRAND

    1.2.2 METAL POSITIONING FRAME CONNECTION


    Adapter F34DM011 is required for the connection with the metal positioning frame.
    Use the flat cable F34NTF02 to connect the adapter F34DM011 to the DIGITAL PORT of the New Trasdata.
    Connect the BOOT (LINK) pins to PIN 10 of the programming pads and make sure that the boot switch, present on
    the F34DM011 adapter, is in the ON position.
    Also, It will be necessary to solder a third wire and connect it to the CNF1 clamp of the F34DM011 adapter.

    ATTENTION

    The following photos are merely indicative.

    https://ecu.design
    BOSCH EDC17CV44_54_56 IROM TC1767 ALLBRAND

    Alternatively, the BOOT signals can also be connected to the corresponding orange terminal on the F34DM011
    adapter.
    Make sure the yellow boot switch is in the ON position, then connect the FLAT F34NTF02 cable of the adapter to
    New Trasdata.

    ATTENTION

    The following photos are merely indicative.

    https://ecu.design

    You might also like