Spare Parts Catalogue

GS PRO-2008-S2-1220X525
Handling systems | Hubwagen
Valid for machine code: GF561000000
Revision: 0 (2/2009)

Copyright 2009 Pramac Group, All Rights Reserved.

IMPORTANT NOTICE: Before using this information please check if updated releases have been published on Pramac Service & Parts Online Center - http://www.pramacparts.com This document was printed on 8 December 2009
 Functional Group Functional Group Number Table Number Revision
Bertriebsgruppe 1 - 0 (02-2009)
GS PRO-2008-S2-1220X525 - Machine code: GF561000000 Spare Parts Catalogue GS PRO-2008-S2-1220X525 - Revision: 0 (2/2009)

330
329
328
327

342

331 332

334 333 343

302
304
301
326

309 308
303
310 325
305

307 341 311

315
335
332 336
317 319
338 312
306 318
313
321

340 320
316 339
311
315
336 324 323
322

314
337

IMPORTANT NOTICE: Before using this information please check if updated releases have been published on Pramac Service & Parts Online Center - http://www.pramacparts.com This document was printed on 8 December 2009
 Functional Group Functional Group Number Table Number Revision
Bertriebsgruppe 1 - 0 (02-2009)
GS PRO-2008-S2-1220X525 - Machine code: GF561000000 Spare Parts Catalogue GS PRO-2008-S2-1220X525 - Revision: 0 (2/2009)

Position Part Number Description Notes

301 S000003502 Piston Gs/global (machined) -

302 G09007 Spring Slide Cup Gs/usa '99 Lam.zn -
303 G001103 Spring De42 F.4,5x125 P.15 Grinded-zinc Plated -
304 S0004013006 Plunger Pump Gs -
305 S0004010470 Burnished Cylinder Gs-gs/galv Assembled -
306 S0004013008 Chain Guide Pin (l.98) Burnished -
307 G096001 Copper Washer 18x23,5x1,5 -
308 S0004011012 Cast Iron Bridge Gs -
309 S0004013001 Pump-up Roller Tp/gs Burnished -
310 S0004013002 Pump-up Roller Pin Gs -
311 S000003061 Wheel Injected Polyurethane/nylon Gray Color D200x55+bearings '07 Gs -
S0002010169 Ruota Gomma D200 (model No. Ea200bh-65a Lifter) +cuscinetti -
S0004010186 Nylon Wheel D200 With Bearings -
S0014010233 Polyurethane Wheel /all D200x50 Lag + Bearings 6204 -
312 G016116 Ball 7/32" (mm5,556) -
313 G001104 Spring De8 F.1,7x22 P.3,5 Grinded -
314 S0004015007 Cross Screw Zinc Plated Gs -
315 G091101 Wheel Dustguard Tp 47x20 Sp3.9 Tellure -
316 S000003901 Opening Spill Pedal '07 Gs -
317 S0004018002 Body Pump Bushing Gs (20x22x10) -
318 S0004015015 Wheel Axle Gs/hl10e -
319 P0PP00006 Body Pump Gs'02 (spare Part) -
320 S0004018003 Oil Tank Pallet Truck Gs -
321 S0004018001 Oil Tank Cap Pallet Truck Gs -
322 S0004018005 Tank Protection Gs (short) -
323 S0014011030 Cross Gs/cat -
324 G010220 Bearing 6012 Rs(60-95-18) -
325 S0004011024 Cast Iron Bushing Gs (machined) -
326 P0TT00001 Complete Tie-rod With Handle Lever Gs (ø3.3 -
327 S0004036022 Lowering Lever Spacer Gs -
328 G001126 Lowering Lever Spring Gs -
329 S0004018006 Lowering Lever Pallet Truck Gs -
330 S0004030215 Pump Handle Gs (painted ) -
331 S000003019 Hydr. Assembly Gsgs Usa '02 25q + Rubber Wheels -
332 G016104 Ball 5/16" (mm7,938) -
333 G016103 Ball 9/16" (mm14,288) Ball 2 -
334 G042501 Locker Ring Rs 7434 D10 -

IMPORTANT NOTICE: Before using this information please check if updated releases have been published on Pramac Service & Parts Online Center - http://www.pramacparts.com This document was printed on 8 December 2009
 Functional Group Functional Group Number Table Number Revision
Bertriebsgruppe 1 - 0 (02-2009)
GS PRO-2008-S2-1220X525 - Machine code: GF561000000 Spare Parts Catalogue GS PRO-2008-S2-1220X525 - Revision: 0 (2/2009)

Position Part Number Description Notes

335 G044319 Elastic Peg Spirol 8748 D4x30 -

336 G042120 Outer Seeger 7435 E 20 -
337 G042160 Outer Seeger 7435 E 60 -
338 G044318 Elastic Peg Spirol 8748 D 4x40 -
339 P3VA00001 Slot Pin Gs '02 Complete (spare Part) -
340 G001102 Spring De13 F.1,6x18 P5 Grinded-zinc Plated -
341 S0004010036 Complete No Return Valve Gs (spare Part) -
342 S0004030243 Pump Handle Gs Basic '08 -
343 P0KI00003 Gasket Set Gs '02 -

IMPORTANT NOTICE: Before using this information please check if updated releases have been published on Pramac Service & Parts Online Center - http://www.pramacparts.com This document was printed on 8 December 2009
 Functional Group Functional Group Number Table Number Revision
Rahmen 2 - 0 (02-2009)
GS PRO-2008-S2-1220X525 - Machine code: GF561000000 Spare Parts Catalogue GS PRO-2008-S2-1220X525 - Revision: 0 (2/2009)

106
103 105
104

101

102 103
100
101

102

119 113
112 109
107 106
108
119 110
118

113
112 111

114
109
108

115 116 114

IMPORTANT NOTICE: Before using this information please check if updated releases have been published on Pramac Service & Parts Online Center - http://www.pramacparts.com This document was printed on 8 December 2009
 Functional Group Functional Group Number Table Number Revision
Rahmen 2 - 0 (02-2009)
GS PRO-2008-S2-1220X525 - Machine code: GF561000000 Spare Parts Catalogue GS PRO-2008-S2-1220X525 - Revision: 0 (2/2009)

Position Part Number Description Notes

100 V0001010353-PRAMAC Telaio Gs 1220x525 Vern.verde Pramac -

101 S0002350351 Push Rod Gs 1220 Painted -
102 S0002205038 Pin D16x113 Gs -
103 S0003005055 Push Rod Internalfork Bushing Ck Zinc -
104 S0003020146 Rocker Arm Gs Painted L=520 -
105 S0003015038 Rocker Arm Axle Gs 520 -
106 G044304 Elastic Peg 6873 D 6x32 -
107 S0002205040 Reference Pin Gs -
108 G056104 Exit Nylon Roller D38 Gs -
109 S0002201027 Double Clevis Gs (machined) -
110 S0002010131 Nylon Roller D82x82 + Bearing -
S0002010178 Injected Polyurethane Roller D82x82 + Bearing -
S0112020093 Polyurethane Roller D82x80 + Bearings -
111 S0002206023 Single Roller Spacer Gs -
112 S0002205039 Tandem Connection Pin Gs -
113 G044319 Elastic Peg Spirol 8748 D4x30 -
114 S000003005 Rocker Tandem Gs'01 Zinc Plated -
115 S0002010132 Nylon Roller D82x60 + Bearing -
S0012050170 Injected Polyurethane Roller D82x60 + Bearings -
116 S0012035029 Tandem Roller Spacer Gs -
117 S0012030177 Complete Rollers Tandem Nylon Gs -
S0012030178 Complete Rollers Tandem Injected Polyurethane Gs -
118 G056103 Entry Roller Fork Tp/e-gs -
119 G09660 Entry Roller Bracket '07 Gs -

IMPORTANT NOTICE: Before using this information please check if updated releases have been published on Pramac Service & Parts Online Center - http://www.pramacparts.com This document was printed on 8 December 2009