Nothing Special   »   [go: up one dir, main page]

Clevios PH 1000 20101222

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

CONDUCTIVE POLYMERS DIVISION Number 81076210

Issue 2010-12-22

CLEVIOS™ PH 1000

Chemical Formula
( )
n

SO-3 SO3H SO3H SO3H SO-3 SO3H

O O O O O O
2+
S S S
( S S S
)
m

O O O O O O

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)

Description of Product Aqueous dispersion, blue liquid.

Synonyms / Abbreviations PEDT / PSS, PEDOT / PSS


________________________________________________________________________________________

1
Physical Characteristics

Min Max Unit


Solid content 1.0 - 1.3 %
Specific conductivity* 850 S/cm
Viscosity 15 - 50 mPas
*After the addition of 5% Dimethyl sulfoxide. Measured on the dried coating.

Technical Data (guide values, not a specification)

Form liquid
Odour odourless
Colour dark blue
PEDOT:PSS ratio 1:2.5 (by weight)
pH 1.5 – 2.5 at 20°C
3
Density 1 g/cm at 20°C
Boiling Point approx 100°C

1) Information on test methods is available on request.


1/2
Number 81072610
Issue 2010-12-22

Storage and Handling Avoid freezing!


Storage and handling are subject to the rules and regulations in the country of use.
When stored at temperatures between 5°C and a maximum of 10°C,

CLEVIOS PH 1000 will remain stable for 9 months from date of production in sealed
original containers. After opening the containers must be well closed to prevent the
evaporation of water which may result in the formation of a non re-dispersible film.
The product is sensitive to frost and should therefore not be stored at temperatures
below 5°C. The product cannot be used if it has been frozen.
Brief heating to max. 50°C has no adverse effect on product properties.

Hazards identification See material safety data sheet.


Documentation An inspection document in accordance with EN 10204 is supplied with every
commercial order. Inspection documents for samples are supplied on request.

Contact john.bayley@heraeus.com
Phone: +49 214 30-26718, Telefax: +49 214 30-56284

Note: PRELIMINARY SPECIFICATION (The product described is still under test.


Amendments of all technical data are possible. Special care has to be taken while
processing.)

Heraeus Clevios GmbH


CHEMPARK Leverkusen
Building B 202,
51368 Leverkusen/Germany
Phone +49 214 30-1, Fax +49 214 30-56284

The conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations),
including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance
and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis at
least must include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been
done by Heraeus. All information is given without warranty or guarantee. It is expressly understood and agreed that the customer assumes and hereby expressly
releases Heraeus from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any
statement or recommendation not contained herein is unauthorized and shall not bind Heraeus. Nothing herein shall be construed as a recommendation to use
any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent. In case of order
please refer to issue number of this product data sheet. All deliveries are based on the latest issue of the product data sheet and on the latest version of our
General Conditions of Sale and Delivery.

2/2

You might also like