Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    Blasia 68

    Uploaded by

    Marcelo Ferreira Melo
    The AGIP BLASIA series of oils were developed to meet requirements for EP (extreme pressure) lubrication, especially for gears under severe operating conditions. They are formulated from paraffinic base stocks and additives like sulfur and phosphorus compounds to provide good performance under high speeds, shock loads, and high loads. AGIP BLASIA oils demonstrate very good antiwear and EP properties in various tests. They also have properties like thermal and oxidation stability, non-corrosiveness, demulsibility, and rust protection. The oils are recommended for lubricating enclosed gears and other heavily loaded components operating at high temperatures and loads.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Blasia 68

    Uploaded by

    Marcelo Ferreira Melo
    47 views2 pages
    The AGIP BLASIA series of oils were developed to meet requirements for EP (extreme pressure) lubrication, especially for gears under severe operating conditions. They are formulated from paraffinic base stocks and additives like sulfur and phosphorus compounds to provide good performance under high speeds, shock loads, and high loads. AGIP BLASIA oils demonstrate very good antiwear and EP properties in various tests. They also have properties like thermal and oxidation stability, non-corrosiveness, demulsibility, and rust protection. The oils are recommended for lubricating enclosed gears and other heavily loaded components operating at high temperatures and loads.

    Original Description:

    ficha técnica

    Original Title

    BLASIA 68

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The AGIP BLASIA series of oils were developed to meet requirements for EP (extreme pressure) lubrication, especially for gears under severe operating conditions. They are formulated from paraffinic base stocks and additives like sulfur and phosphorus compounds to provide good performance under high speeds, shock loads, and high loads. AGIP BLASIA oils demonstrate very good antiwear and EP properties in various tests. They also have properties like thermal and oxidation stability, non-corrosiveness, demulsibility, and rust protection. The oils are recommended for lubricating enclosed gears and other heavily loaded components operating at high temperatures and loads.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    47 views2 pages

    Blasia 68

    Uploaded by

    Marcelo Ferreira Melo
    The AGIP BLASIA series of oils were developed to meet requirements for EP (extreme pressure) lubrication, especially for gears under severe operating conditions. They are formulated from paraffinic base stocks and additives like sulfur and phosphorus compounds to provide good performance under high speeds, shock loads, and high loads. AGIP BLASIA oils demonstrate very good antiwear and EP properties in various tests. They also have properties like thermal and oxidation stability, non-corrosiveness, demulsibility, and rust protection. The oils are recommended for lubricating enclosed gears and other heavily loaded components operating at high temperatures and loads.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    AGIP BLASIA

    PRODUCT DATA SHEET

    The AGIP BLASIA series has been developed to meet the widest range of requirements of EP (Extreme
    Pressure) lubrication, such as, for instance, gears operating under severe duty (ISO-L-CKD classification).
    The oils are formulated from paraffinic base stocks and additives such as sulphur compounds (which
    ensure good high-speed and shock-load performance) and phosphorus compounds (for low-speed and high-
    load performance).
    They thus satisfy the widest range of operational requirements.

    CHARACTERISTICS (TYPICAL FIGURES)

    AGIP BLASIA 68 100 150 220 320 460 680


    Viscosity at 40°C mm²/s 64 100 141 220 300 460 627
    Viscosity at 100°C mm²/s 8,2 11,8 13,9 18,7 23,0 30,9 35,4
    Viscosity Index - 95 95 95 95 95 95 90
    Flash Point COC °C 225 230 235 240 240 245 250
    Pour Point °C -27 -24 -22 -20 -18 -15 -9
    Mass density at 15°C kg/l 0,885 0,890 0,895 0,895 0,900 0,905 0,915

    PROPERTIES AND PERFORMANCE

    ƒ AGIP BLASIA oils have very good antiwear and EP properties as demonstrated by the following tests:
    - FZG: pass the 12th stage level;
    - TIMKEN: OK LOAD 60 lbs;
    - 4 BALL EP:* 110 kg last nonseizure load;
    - * 280 kg weld load.
    ƒ The oils also possess the following properties:
    ƒ thermal and oxidation stability, permitting continuous use at operating temperatures as high as 100 °C
    ƒ non-corrosiveness towards materials employed for the construction of machinery and especially those
    used for gaskets and seals, as well as metals such as steel, cast iron, copper and bronze;
    ƒ demulsibility: AGIP BLASIA oils separate rapidly from water and thus ensure perfect lubrication even in
    applications where water contamination is possible, as in steelmaking plants, for instance;
    ƒ rust protection properties: These oils effectively help protect and conserve lubricated parts even in
    damp conditions;
    ƒ toxicity: the products are non-toxic since they contain no lead compounds; they can thus be used in
    oil-mist lubrication systems.

    APPLICATIONS

    AGIP BLASIA oils are recommended for splash or circulation lubrication of all types of enclosed gears,
    especially where operating conditions involve heavy loads, high speeds and high relative sliding velocities,
    at elevated ambient and operating temperatures. The oils can also be used to lubricate other heavily-
    loaded parts and components such as couplings, transmission screws and low speed plain bearings. As
    indicated, they can be used, too, in oil-mist lubrication systems.

    Eni S.p.A. Via Laurentina 449, 00142 Roma


    Tel. centralino +39 06 5988.1
    [IN334.05.03]
    Divisione Refining & Marketing www.eni.it Page 1 of 2
    AGIP BLASIA
    PRODUCT DATA SHEET

    SPECIFICATIONS

    AGIP BLASIA oils meet the requirements of the following specifications:

    - ISO-L-CKD
    - ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP)
    - ASLE EP
    - DIN 51517 teil 3 CLP
    - U.S. STEEL 224
    - DAVID BROWN S1.53.101(5E)
    - ISO 12925-1

    AGIP BLASIA products have been approved by the CINCINNATI MILACRON (P-63 ISO 68, P-77 ISO 150, P-74
    ISO 220,P-35 ISO 460).
    AGIP BLASIA 150, 220, 320, 460, 680 are approved by Danieli according to Standard 0.000.001 specification

    Eni S.p.A. Via Laurentina 449, 00142 Roma


    Tel. centralino +39 06 5988.1
    [IN334.05.03]
    Divisione Refining & Marketing www.eni.it Page 2 of 2

    You might also like