JCB ATTACHMENTS

& ACCESSORIES’

The Complete Solution

$77$& +0 (176
 WHY JCB ATTACHMENT ?
COMPLETING THE SOLUTION - India’s largest dealer network
By specifying a genuine attachment you can be assured that every The fitment of an approved JCB attachment to a machine gives the
attachment will : customer peace of mind that both the JCB machine and the attachments
are fully backed by a seamless JCB warranty package supported by the
- Be a perfect match to the carrier machine JCB dealer network.
Every product in the JCB attachment Range is fully approved and will
- Maximise machine utilisation
perform most efficiently when partnered with a JCB machine. You
can be sure while specifying a JCB attachment that the machine will By partnering the machine with a range of attachments you will maximise
operate at its optimum performance. its utilisation and create a greater return on investment.

Optimum Attachment use does not

performance affect machine warranty

Fits with ease in Suitable for any

any machine application

$77$& + 0 ( 1 7 6
Value for money Aftersales support

Availability of Standard JCB warranty

attachment parts on every attachment
JCB HAMMERMASTERS
HM140 HM180 HM280

- JCB breakers feature outstanding impact energy and compact - JCB breakers feature outstanding impact energy and compact - It is a blank firing breaker, suitable for secondary breaking.
construction for class-leading power-to-weight performance. construction for class-leading power-to-weight performance.
- Internal control valve system keeps hydraulic system cool
- Sealed for life accumulator means the accumulator only needs - Higher operating weight of 235 kgs helps the stress wave to and increases efficiency up to 15%*.
recharging upon a full rebuild service, reducing maintenance transverse to the ground more effectively and efficiently.
costs. - Uniform piston design at top and bottom to transfer full energy
- Tool diameter of 57 mm ensures higher productvity per hour. to tool.
- Stainless steel piston eliminates corrosion and offers greater
protection to the seals. - Higher impact rate 600~1500 bpm of HM180 helps to achieve
higher productivity. - Cushioned damper to prevent repercussion to carrier.

- Quick hitch mount with quick release. - Patented powercell holding system.
- High tensile bottom bush for better life (HRC- 57).
- Maximum impact energy of 550 joules, more power per stroke.

Application Technical parameters Application Technical parameters Application Technical parameters

Quarry-Secondary breaking Operating weight : 235 kgs Industry Operating weight : 235 kgs Industry Operating weight : 260 kgs
Pipe & cable laying - Trenching Impact energy : 294 Joules Road construction Impact energy : 290 Joules Road construction Height : 1513 mm
Blow rate : 600~1500 bpm Impact rate : 600 - 1500 bpm Impact rate : 380 - 1000 bpm
Road & realty sector - Foundation Real estate Real estate
work & demolition Oil flow range : 23~70 lpm Tool diameter : 57 mm Tool Diameter : 57 mm
Tool diameter : 57 mm
Carrier weight : 1.5~4 ton

Suitable for: Suitable for: Suitable for:

JCB 30Plus Skid Steer Loader 3DX, 3DX Super & 3DX Xtra

ATTACHMENTS 5
 HM360XHD HM380 HM400

- Highest blow energy per minute amongst its class of breakers - Highest Impact energy of 981 joules. this is highest amongst 6-8 - Box structured HM400 with high power to weight ratio is the
and ensures reliability, durability, low maintenance cost and ton class of breakers and makes it unique to break hard rocks at perfect match for Backhoe Loaders with high productivity at low
higher safety. quarries. cost.
- HM360XHD rock breaker is an extra powerful attachment - Standard ANTI-BLANK FIRING feature avoids any damage to - Constant Blow Energy of 900J & higher impact rate of
having constant blow energy and best suited for demolition, the internal parts and carrier structure. 800-900 bpm breaks the toughest rock at quaries with ease.
excellent performer for secondary breaking of rocks at quarries.
- Robust casing design helps narrow trenching and protects the - Energy recovery system ensures the working of HM400 at low
- 40% more power with every blow, 27% higher impact frequency powercell from any damages. RPM resulting in low fuel consumption.
and biggest tool diameter with 27% more steel ensures more
productivity per carrier hour with reduced operating cost. - Higher operating weight helps the stress wave to transverse to - Designed with only one lifetime diaphragm that does not require
the ground more effectively and efficiently. frequent gas charging.
- Quick release coupling helps to reduce changeover interval,
eliminates hydraulic oil wastage, it is easier to assemble and - Quick release coupling helps to reduce changeover interval, - One Sole Mono Block structure with no tie rods for easy access
disassemble the hydraulic hoses. eliminates hydraulic oil wastage and it is easier to assemble and to the internal parts for maintenance.
disassemble the hydraulic hoses.
- The unique tool and integrated tool bushing locking system, - Two PU pads isolate the mono block from the metal body
allows for No fuss tool and bushing, removal and field - Fully folding capability of Breaker during transportation avoids any which makes it the silent breaker delivering lowest noise level of
replacement. HM360XHD has No tie rods and offers 30% damages to machine structure. 114dBA.
fewer parts amongst its range. - Simple internal design makes it easy to maintain the HM380 in
the long run.

Application Technical parameters Application Technical parameters Application Technical parameters

Quarry-Secondary breaking Operating weight : 385 kgs Quarry-Secondary breaking Operating weight : 410 kgs Quarry-Secondary breaking Operating weight : 430 kgs
Pipe & cable laying - Trenching Impact rate : 500 - 1700 bpm Pipe & cable laying - Trenching Impact rate : 380 - 900 bpm Pipe & cable laying - Trenching Impact rate : 800 - 900 bpm
Carrier weight : 4.6 - 9 ton Impact energy : 981 Joules Impact energy : 900 Joules
Road & realty sector - Foundation Road & realty sector - Foundation Road & realty sector - Foundation
work & demolition Tool diameter : 80 mm work & demolition Carrier weight : 4.5 - 8 ton work & demolition Carrier weight : 6 - 8 ton
Smelter- Steel waste breaking Tool diameter : 75 mm Smelter- Steel waste breaking

Suitable for: Suitable for: Suitable for:

3DX, 3DX Super, 3DX Xtra, 4DX, JS80, JS81 3DX, 3DX Super, 3DX Xtra, 4DX, JS80, JS81 3DX, 3DX Super, 3DX Xtra, 4DX, JS80, JS81

6 ATTACHMENTS
 HM435A HM1180 HM2000F

- It is an anti-blank firing breaker, suitable for secondary breaking. - Highest operating weight of 1150 kgs. amongst 11-14 ton class - Relying on the experimental analysis of high-speed camera,
of breakers makes HM1180 more productive and robust. radar speed measurement and oil pressure test, the best piston
- Internal Control Valve System keeps hydraulic system cool and
- Standard ANTI-BLANK FIRING feature avoids any damage to and valve movement is matched, and the energy efficiency of
increases efficiency up to 15%*.
the internal parts and carrier structure. the excavator is fully utilized to realize the advantages of low oil
- Uniform piston design at top and bottom to transfer full energy to - Higher Impact rate (bpm) of HM1180 helps to achieve higher return line pressure, powerful striking and high working efficiency,
tool. productivity. and protect the excavator’s hydraulic system and structural parts.
- Cushioned damper to prevent repercussion to carrier. - Larger size of retaining pins reduces operating and maintenance
cost.
- Patented powercell holding system.
- Compact auto grease system is supplied as an optional feature,
- High tensile bottom bush for better life. makes it easy for the operator to eliminate wastage and
contamination of special grease.
- Maximum impact energy of 1160 Joules*, more power
- Stroke adjuster maximises output in various applications.
per stroke.

Application Technical parameters Application Technical parameters Application Technical parameters

Industry Operating weight : 460 kgs Quarry-Secondary breaking Operating weight : 1150 kgs Quarry-Secondary breaking Operating weight : 1930 kgs
Road construction Impact rate : 400 - 800 bpm Pipe & cable laying - Trenching Impact rate : 440 - 460 bpm Pipe & cable laying - Trenching Impact rate : 360 - 460 bpm
Real estate Impact energy : 1160 Joules Road & realty sector - Foundation Impact energy : 3665 Joules Road & realty sector - Foundation Impact energy : 4200 Joules
Chisel Diameter : 75 mm work & demolition Carrier weight : 12 - 18 ton work & demolition Chisel Diameter : 135 mm
Tool diameter : 115 mm Foundation work

Suitable for: Suitable for: Suitable for:

3DX, 3DX Super & 3DX Xtra JS140 JS200, JS210LC, JS205LC, JCB 220LC Xtra

ATTACHMENTS 7
 HM2150HD HM2160HD HM2170HD

- Lower maintenance cost with good durability. - With optimum operating weight of 1600 kgs makes HM2160HD - 54KW input power for better energy in every blow.
more suitable for 20 ton machines.
- Well-balanced bracket with fewer component. - Dual mode option for blank & anti-blank firing as per application
- Higher impact energy of 4527 joules of HM2160HD is best requirement.
- Global quality main valve and piston.
suited for primary and secondry breaking. - 2 speed control to increase blow per minute for soft strata.
- Easy to use.
- Standard ANTI-BLANK FIRING feature avoids any damage to - Unique valve system for minimum pressure fluctuation and
- Outstanding power to weight ratio. the internal parts and carrier structure. optimised performance.
- Quicker and better after-sales services. - Internal control valve helps to reduce hydraulic oil temperature, - Easy access to maintenance window for gas charging.
avoids contamination and increases system efficiency by 15%.
- High performance with latest technology main valve. - Minimise coupling for faster and easy N2 gas charging.
- Compact auto grease system supplied as optional feature, makes
- Prompt onsite support. - High quality wear pad for better durability and low noise.
it easy for operator to eliminate wastage and contamination of
- Effective buyer technical support programme. MOLUB alloy grease. - Gate valve as standard fitment for cost effective and easy
- Stroke adjuster maximises output in various applications. changeover.
- Top-class “Less Noise” (Box Type Bracket).
- Easy accessible grease point for manual greasing.

Application Technical parameters Application Technical parameters Application Technical parameters

Quarry-Secondary breaking Operating weight(*) : 1764 kg Quarry-Secondary breaking Operating weight : 1600 kgs Quarry-Secondary breaking Operating
Operating weight
weight :: 1600
1900 kgs
kgs
Pipe & cable laying - Trenching Overall length : 2725 mm Pipe & cable laying - Trenching Impact rate : 320 - 600 bpm Pipe & cable laying - Trenching Impact
Height rate :: 320
2726- 600
bpmbpm
Road & realty sector - Foundation Tool length : 1200 mm Road & realty sector - Foundation Impact energy : 4527 Joules Road & realty sector - Foundation Impact
Carrierenergy
weight :: 452720 - 27
Joules
ton
work & demolition Tool weight : 119 kg work & demolition Carrier weight : 18 - 24 ton work & demolition Carrier
Tool diameter
weight : :18 140- 24
mmton
Foundation work Tool diameter : 135 mm Foundation work Tool diameter : 135 mm Foundation work Tool diameter : 135 mm

Suitable for: Suitable for: Suitable for:

JS200, JS210LC, JS205LC, JCB 220LC Xtra JS200, JS210LC, JS205LC, JCB 220LC Xtra JS200, JS210LC, JS205LC, JCB 220LC Xtra

8 ATTACHMENTS
 HM2180HD HM2780HD BACKHOE LOADER
BACK FILL BLADE

- Increased cross sectional area of chisel pins / retaining pins for - Highest weight in its operating class & Impact energy of 10857J - Best fitted attachment for increasing versatility of the machine.
enhanced life and low operating cost. makes it the only choice for Primary breaking at quarries for 30T
class excavators. - Total width of 1524mm.
- Higher impact energy (5350 Joules) of HM2180HD is being - High of 715mm.
- 35% extra large retaining pins & larger through bolt diameter for
generated by longer piston stroke of 900 mm helps to achieve low operating cost. - Use for backfilling around foundations.
higher productivity.
- Robust Box type casing with Hardox plate at bottom for
- Higher impact rate (bpm) of HM2180HD helps to achieve higher enhancement of casing life.
productivity. Standard ANTI-BLANK FIRING feature avoids any - Stroke adjuster for variable speed to suit different application &
damage to internal parts of breaker and the carrier structure. rock hardness.
- Robust casing with HARDOX steel at bottom is added advantage - Compact Auto greaser supplied as an optional feature for proper
to the life of HM2180HD. & efficient greasing automatically.
- Uniform piston design at top & bottom to transfer full strength to
- Compact auto grease system supplied as optional feature, makes the tool to break the hardest rock at the site.
it easy for operator to eliminate wastage and contamination of
special grease.
- Stroke adjuster maximises output in various applications.

Application Technical parameters Application Technical parameters Application Technical parameters

Quarry-Secondary breaking Operating weight : 1810 kgs Quarry-Secondary breaking Operating weight : 2700 kgs Backfilling around foundations Width : 1524mm
Pipe & cable laying - Trenching Impact rate : 340 - 550 bpm Pipe & cable laying - Trenching Impact rate : 280 - 330 bpm Waste management Height : 715mm
Impact energy : 5350 Joules Impact energy : 10857 Joules Total height : 771mm
Road & realty sector - Foundation Road & realty sector - Foundation Landscaping
work & demolition Carrier weight : 20 - 26 ton work & demolition Carrier weight : 28 - 42 ton
Tool diameter : 135 mm Tool diameter : 155 mm
Foundation work Foundation work

Suitable for: Suitable for: Suitable for:

JS200, JS210LC, JS205LC, JCB 220LC Xtra JCB 305LC, JCB 370LC, JCB 380LC Xtra, JCB 380LC QM 3DX & 4DX

ATTACHMENTS 9
 BACKHOE LOADER - QUICK HITCH BACKHOE LOADER BACKHOE LOADER
EARTH DRILL/AUGER INTELLIGENT GREASING SOLUTION

Loader End Front Axle End Excavator End

22 points 9 points (3DX) 27 points

- Ensures greater safety and less effort for the operator with - 6000 Nm of drilling torque provides better percussion force to - JIGS have 58 points of backhoe loader which requires frequent
quicker changeover of buckets and attachments. drill hole up to 2.2 metres. greasing with the help of 12V electric motor driven grease pump.
- Durable design, with harden steel jaws minimises wear. - Choice of heavy duty and rock duty to suit different soil strata. - JIGS enhances life of vehicle parts by reducing wear & tear of
Rock duty augur reduces operating and maintenance cost. rotating or mating parts and thereby, the total life of the vehicle.
- Mechanically operated with spring loaded lock, released by use
of a tommy bar. - Standard 2” hexagon drive with two mounting holes to - Ensures less down-time of vehicle since greasing is being done
accommodate various sizes of augers. automatically while machine is in operation, thereby improving
- The safety lock pin prevents accidental loss of bucket or the operating time.
attachment. - Choice of different sizes from 9” to 36” diameter and 1.2 mts
length to suit different applications. Rock duty flights are available - Frequent and regular greasing reduces overall operating and
- Easier to change from one attachment to another in less than one in 9”, 12” ,18” and 24”diameter. maintenance cost of operation and machine can be run only by
minute. operator.
- ONE metre extended bar option is available to dig up to 2.2 mts
- Provides extended life to pivot pins since no hammering action is hole. - Proper greasing of pins and bushes reduces downtime and
required during change of attachments. increase availability of the machine.
- Supplied with hanger bracket and tail hoses to suit the machine,
replaceable teeth and pilot bit for greater service life. - Assured ROI (return on investment) within 9-12 months.
Eliminates failures and breakdowns because of poor practices.

Application Technical parameters Application Technical parameters Application Technical parameters

Quarry - Changeover of buckets Weight : 95 kgs Construction - Electrical Pole Max depth : 2200 mm Greasing of machine pins & Reservoir capacity : 6 kgs
to breaker (BACKHOE LOADER) Agriculture - Plantation (1200+1000 extension) bushes Grease output : 2.8 cc/minute
Road construction - Changeover Industry - Fencing Hole size : 225, 300, 450, 600, Voltage : 12V
of buckets to buckets and other 750, 900 mm Lubricant grade : JCB grease up
attachments Real estate
Torque : 6000 Nm NLGI II
Drive : 2” Hex

Suitable for: Suitable for Backhoe Loader: Suitable for Backhoe Loader:
3DX, 3DX Xtra, 3DX Super, 4DX 2DX, 3DX, 3DX Super, 3DX Xtra, 4DX 3DX, 3DX Xtra

10 ATTACHMENTS
 BACKHOE LOADER BACKHOE LOADER BACKHOE LOADER
JIB CRANE CARRIAGE MOUNTED FORK BUCKETS & SHOVELS

- Most suitable to lift uneven sized goods. - Most suitable for palletized goods at construction sites or in plants - Rolled back shell to reduce soil retention.
to keep goods in healthy condition.
- Easy to mount on loader end of backhoe Loader in place of - Wide Range (Excavator end : 0.06,0.09,0.12,0.18,0.24,0.26
shovel. - Carriage mounted forks comprise of forged steel forks mounted (Soil) & 0.30, 0.32, 0.42 cum) & Shovel : 1, 1.1, 1.2 cum to suit
directly on carriage. different applications.
- Working load capacity of 1016 kgs.
- Working load capacity of 1016 kgs. - Side plate reinforcement offers additional strength and rigidity.
- Lift height from ground 4.5 m. Replaceable wear parts increase durability and extend the
- Self-leveling mechanism keeps the forks horizontal. working life.
- Distance from front tyres 1.6 m.
- Gap of the forks is adjustable to accommodate different sizes of - Matching profile of toe plate to suit cutters and spring steel bushes
- Swivel hook and shackles optional for safe lifting of material. loads. reduces wear to the bushes.
- Palletisation helps to shift load faster and ensures better - 300 and 450 mm bucket option in 2DX also available.
housekeeping.
- 6 in 1 field fitment option available on 2DX & 3DX, high dump
- Also available as an option on 6-in-1 bucket as bucket mounted bucket option also available on 2DX.
fork.

Application Technical parameters Application Technical parameters Application Technical parameters

Pipe laying Lift capacity : 1016 kgs Constructions sites Lift capacity : 1016 kgs Solid waste management Excavator end : 0.06, 0.09, 0.12,
Construction sites Max lift available : 4000 mm Industry Fork length : 1071 mm Clearing muddy drain 0.18, 0.24, 0.26
Weight : 326 kgs (Soil) & 0.30, 0.32,
Industry - Rental Min reach from : 1600 mm Realty sector Quarry - Loading & unloading
tyre Width : 1500 mm (Top Member) 0.42 cu.m
Quarry - Lifting applications
Shovel end : 1, 1.1, 1.2 cu.m

Suitable for Backhoe Loader: Suitable for: Suitable for:

3DX, 3DX Super, 3DX Xtra, 4DX 3DX, 3DX Super, 3DX Xtra, 4DX 2DX, 3DX, 3DX Super, 3DX Xtra, 4DX

ATTACHMENTS 11
 BACKHOE LOADER BACKHOE LOADER BACKHOE LOADER
DITCH CLEANING BUCKET 6-IN-1 SHOVEL POLEMASTER

- Primarily used for cleaning ditches, drainage canals etc. - Total versatility in all material handling duties from simple loading - JCB pole master is most versatile, cost effective and easy to handle
- Ditch maintenance/grading buckets have a central reinforcing with precision, 6 in 1 bucket maximises loader productivity giving RCC Pre Cast Concrete Rectangular and Square Poles.
plate that gives added strength and rigidity. the operator a wider choice of options.
- JCB pole master can carry Concrete poles up to 500 kgs with
- Drainage holes to reduce weight/density during operation. - The options are dozing, loading, digging, grabbing, spreading and minimum human intervention. Simplicity and easy operation of
grading. Attachment makes it ideal for highway Pole planting solution.
- Smooth-edged bucket is available in 0.22 cu.m size with width of
1500 mm. - Teeth and toe plate options for even longer service life. - JCB pole master can lift & place Poles with precise control and
can rotate Poles to 95 degrees in rugged terrain. Front mounted
- Wide and shallow design removes ditch sediment quickly. - 6 in 1 operates from standard loader auxiliary circuit. Rubberized Jaw opening from 95 mm to 350 mm helps to handle
Ensures minimum time wastage on the job. - Twin ram of 6 in 1 design gives extra power to handle operation different Pole sizes for handling. It is capable of setting poles up to 9
smoothly and efficiently. meters and mass of 500 kgs.
- Top bracket design in line with JCB backhoe boom design.
- Replaceable wear parts increase durability and extend the - Circuit kit required
working life.
- Circuit kit required.
Application Technical parameters
Pole Planting Jaw width - max : 350 mm
Plantation Jaw width- min : 95 mm
Swivel of Jaw : +/- 10 deg
Length of beam pole planter : 3400 mm
Application Technical parameters Application Technical parameters Pole rotation : 95 deg
Solid waste management Width : 1525 mm Road construction - Tunnel Width : 2180 mm Max pole mass : 500 Kgs
Clearing muddy drain / clearing Capacity : 0.22 cu.m application, hilly terrain Capacity : 1.0 cu.m Max pole length : 9000 mm
sewerage Weight approx : 140 kgs Crusher plant - Confined area, Weight : 691 kgs approx System pressure : 160 bar
hopper loading
System flow : 40 lpm
Landscaping application Mass of pole planter approx : 490 kgs

Suitable for: Suitable for: Suitable for:

3DX, 3DX Xtra, 3DX Super, 4DX 3DX, 3DX Super, 3DX Xtra, 4DX 3DX, 3DX Super, 3DX Xtra, 2DX

12 ATTACHMENTS
 BACKHOE LOADER BACKHOE LOADER BACKHOE LOADER
INDUSTRIAL GRAPPLE HIGH DUMP BUCKET JAW BUCKET (AUXILIARY CIRCUIT)

- 3DX industrial grapple is best suited for handling solid waste and - Increased dump height of 3.1 m over standard 2.20 m on - The JCB jaw bucket offers two-in-one versatility - a digging
is very much productive for garbage, agriculture waste, timber material handling shovel. bucket plus a jaw for grabbing awkward loads.
industry, paper industry and other related applications.
- It eliminates the need for loading ramps or boom arm extensions - Rolled top section increases structural integrity.
- Opening of top grab with twin cylinders helps to grab more by quickly transforming your standard shovel of 2DX into an
material per cycle which enhances productivity of the backhoe effective loading machine. - A central reinforcing plate gives added strength and rigidity.
loader. - Two attachments in one, a standard bucket and a powerful
- Feature of bottom pivot point allows the operator more bucket
- Heavy duty grab features lateral bracing for additional strength. clearance while emptying a load. hydraulic jaw.

- Supplied with top grab for clamping bulky and uneven load. - Greasing points on pivot points increase the life of pins & bushes. - Designed for maximum compatibility, performance and durability.

- Rolled back shell for easy release of material capacity. - Flat bottom design allows easier clean out. - Additional wear strip provides increased strength and resistance
to abrasion.
- Directly mounted to the 3DX backhoe loader arm for easy - Circuit kit required.
mounting. - Circuit kit required

- Circuit kit required

Application Technical parameters Application Technical parameters Application Technical parameters

Solid waste management - To Weight : 925 kgs Hot mix plants/RMC Plants Dump height : 3.1 m Waste Management Weight : 280 kgs
clearwaste Capacity : 1.0 cu.m Small crushers Capacity : 0.50 cu.m Bush & shrub removal Capacity : 0.20 cu.m
Clearing muddy drain Opening : 1440 mm Forward reach : 1.15 m Outer width : 600 mm
Standard dumpers/tippers
Soil excavation - Loading & Width : 2350 mm Pay load : 700 kgs
unloading

Suitable for: Suitable for: Suitable for:

3DX, 3DX Xtra, 3DX Super, 4DX 2DX 3DX, 3DX Super, 3DX Xtra

ATTACHMENTS 13
 TOOTHLESS RIPPER TOOTH LIGHT EQUIPMENT LIGHT EQUIPMENT
HYDRAULIC POWER PACK-BEAVER DISC CUTTER

- Ground engaged area is manufactured with Hardox 400 for - Portability and far smaller honda petrol engine driven hydraulic - The JCB disc cutter is a well balanced, quiet unit designed for use
longer life. power pack beaver makes better business sense than pneumatic with JCB power packs. It cuts most materials including metals,
or electrical options. concrete, stone etc upto 4’’ thickness.
- Reinforced gusseted shank, boxed, lugging plate for unparalleled
strength. - Combination of performance, compact & user friendly design - Supplied complete with tail hoses with flat faced quick release
ensures overall efficiency that has no comparison. drip less couplings for speed of change and can be powered by
- Spade angle increases penetration and cycle time for increased beaver or 3DX through circuit kit.
production. - Same power at the tool with an 8 hp JCB powerpack rather than
a 40 hp air compressor. - Removable handle for right and left hand operation.
- Rugged HD Ripper Tooth has the ability to rip and remove rocks
with ease. - Unique suction circuit eliminates pulsation damage to the cooler. - Flow regulator to prevent over speeding.
- Can be hard faced for enhancing life and lower maintenance cost. - Power-on-demand system that reduces off load engine speed to - Adjustable guard for safety, all parts are secured inside the guard.
idle, giving reduced noise levels and less engine wear and lower
fuel consumption. - The disc cutter has a tooth belt drive which is suited to dusty and
dirty working conditions.
- Swing open frame provides an excellent maintenance access to
engine and hydraulics.
- Adjustable hydraulic flow gives precision control and integral hose
track prevents damage to hoses.

Application Technical parameters Application Technical parameters Application Technical parameters

Road construction Body - Fabricated Rock breaking Engine : Honda GX240 Concrete cutting diameter : 300 mm
Hard surface loosening Demolishing Weight : 66 kgs Metal cutting Max cutting depth : 102 mm
Hyd flow : 0 - 20lpm RPM : 6000 @20 lpm
Tree uprooting Concrete & steel cutting Max pressure : 38 bar Stone cutting
Operating weight : 10 kgs
Main hoses : 7m
Hyd oil capacity/ : 5lts/ 6 lts.
fuel capacity
Suitable for: Suitable for: Suitable for:
3DX, 3DX Super, 3DX Xtra, 4DX, JS80, JS8, JS140, JS200, JS210LC, Handheld breaker,Trash pump & Disk cutter
JS205LC, JCB 220LC Xtra 3DX, Beaver, 3DX Super, 3DX Xtra, Beaver 4DX

14 ATTACHMENTS
 LIGHT EQUIPMENT LIGHT EQUIPMENT EXCAVATOR - QUICK HITCH
HAND HELD BREAKER-HM 25 TRASH PUMP

- 26 Kgs powerful high output breaker is ideal for use with beaver - Rugged durable range of 4” submersible trash pumps used for - Provides greater safety and less effort for the operator to quickly
power pack or can be powered by 3DX through extra circuit kit. pumping water with mud, leaves, twigs, sand, sewage and sludge changeover buckets and attachments.
in it.
- HM25 is supplied as standard with anti-vibration handles, giving - Primary hydraulic locking system; designed to actively unlock the
the breakers class leading low vibration levels. - Used to handle matter that would clog most other pumps. front and rear hooks. Unlock sequence is correctly carried out
making unhitching an active & easy process.
- Robust cast steel construction. - Greater lift height than suction pumps.
- Secondary mechanical locking systems featured on both the front
- Supplied with tail hoses and quick connect couplings. - Self priming and run dry. and rear hooks; ensure the attachments stay locked even in the
- Sealed system results in low noise and higher productivity. - Unique combi sealed- Protects main pump seal. event of complete hydraulic failure.
- Durable heavy duty hosing and handles gives extra service life. - 5000 hrs sealed bearing- minimal maintenance required. - Multi-pin centre pick up; making the hitch suitable for use with a
variety of attachments and buckets.
- Range of tools, moil point, chisel, asphalt cutter & rammer pad - Removable wear plate- protects pump hosing.
make its usage versatile. - Excellent visibility maintained by colour coding; hooks can be
visually checked from the cabin itself.
- Provides extended life to pivot pins since no hammering action is
required during the change of attachments.

Application Technical parameters Application Technical parameters Application Technical parameters

Rock breaking Weight : 26 kgs Water drainage Discharge port : 2 & 4 inch Quarry - Changeover of buckets Weight : 374 kgs (20T)
Demolishing Moil/chisel tool : 32 mm Mud mixed water drainage Operating weight : 8 & 32 kgs to breaker and other attachments Lifting capacity : 11 ton (20T)
hex size Max discharge : 600 & 2000 lpm Road construction - Changeover
Concrete & steel cutting Sewer drainage
Hyd flow :18~22 lpm Max head : 18 & 10.5 m of buckets to buckets and other
attachments
Blow frequency : 1500 bpm

Suitable for: Suitable for: Suitable for:

3DX, Beaver 3DX Super, 3DX Xtra, Beaver 4DX 3DX, Beaver 3DX Super, 3DX Xtra, Beaver 4DX JS140, JS205LC, JS210LC

ATTACHMENTS 15
 EXCAVATOR MINI EXCAVATOR QUICK HITCH MINI EXCAVATOR
DITCH CLEANING BUCKET BUCKET DITCH MAINTENANCE

- Drainage holes on ditch maintenance buckets allow water to - Increases safety and reduces operator effort when changing - A central reinforcing plate gives added strength and rigidity
escape, giving a better fill factor buckets and attachments
- A rolled top section increases structural integrity
- Primarily used for cleaning ditches, drainage canals etc. - Durable design, with hardened steel jaws that keep wear to a
minimum - Drainage holes on ditch maintenance buckets allow water to
- Drainage holes to reduce weight/density during operation. Wide escape, giving a better fill factor
and shallow design removes ditch sediment quickly. Ensures - Mechanically operated with spring loaded lock released by use of
minimum time wastage on the job. a tommy bar
- 1.02 cu.m Ditch Cleaning bucket is specially designed for Ditch - High visibility safety lock pin prevents accidental loss of bucket or
Cleaning operation. attachment
- 125 mm X 100 mm holes to clean ditches , Canals and drainages
effectively.
- Optimum weight of the bucket helps to increase overall fuel
efficiency of Excavator.
- Due to its special profile material retention is nill which increases
the productivity.
- Replaceable BHN 400 Hardness Toe Plate increases service life.

Application Technical parameters Application Technical parameters Application Technical parameters

Solid waste management - 1.4 cu.m Bucket ditch cleaning Quarry - Changeover of buckets Weight : 37 kgs Solid Waste Management - Clear Weight : 78kgs (Excluding Pins)
Clear watery waste with tooth to breaker and other attachments Operating width : 35mm Watery Waste Capacity : 0.76 cu.m
Clearing muddy drain / clearing 1.02 cu.m Ditch cleaning Clearing muddy drain / clearing Outer Width : 1000 mm
Road construction - Changeover Manual operation
sewerage of Buckets to other attachments sewerage
Lake cleaning

Suitable for: Suitable for: Suitable for:

JS205, JS220, JCB NXT 205LC, JCB NXT 215LC JCB 30Plus JCB 30Plus

16 ATTACHMENTS
 MINI EXCAVATOR EARTH DRILL EXCAVATOR EXCAVATOR CLAM SHELL
INTELLIGENT GREASING SOLUTION 20T

- For accurate and precise drilling of fence and post holes. - JIGS lubricate & 16 critical points on excavator with the help of - Used for placing objects high. In the construction industry, to
24V electric motor driven pump. move bulk material from one point to another, transporting
- The heavy duty gearbox and compact, powerful drive head. materials from stock piles to conveyors, myriad of material -
- Ensures automatic greasing at the right point, at the right time heavy loads of lumber, scrap metals and rocks.
- Complete with hanger bracket and connection hoses. with right quantity.
- Choice of different sizes from 9” to 36” diameter and 1.2 mts - 1.2 cu.m clam shell is made of two sides that open and close like
- Pin indicators provided on each divider block to ease the the shell of a clam. Technically two buckets are held together with
length to suit different applications. Rock duty flights are available identification/rectification of any blockage/troubleshooting process.
in 9”, 12” ,18” and 24”diameter. the hinge.
- Enhances the life of machine parts by reducing wear & tear of - 360 degree continuous rotation with full articulation.
- One metre extended bar option is available to dig up to 2.2 mts rotating or mating parts, thereby the machine life.
hole. - The traditional clam shell bucket is often used for digging even
- Assured ROI within 6-8 months. Reduces the breakdown time below ground level.
as well as the machine operating & maintenance cost.
- Special features that make them great for digging underwater.

Application Technical parameters

Solid waste management-unloading Capacity : 0.8 & 1.2 cu.m
Application Technical parameters Application Technical parameters Railways - Material unloading from Max allowable : 3000 kgs/m3
Construction - Electrical Pole Max Flight : 760 mm Greasing of machine pins & Reservoir capacity : 4 kgs box type wagon density
Agriculture - Plantation Diameter bushes Grease output : 4 cc/minute Weight : 1800 kgs approx
Paper mills - Unloading timber
Industry - Fencing Torque : 3500Nm from high body trucks and trailers
Voltage : 24V
Real estate Weight : 130 Kgs Ports - Unloading
Lubricant grade : JCB grease up to
NLGI II
Suitable for:
Suitable for: Suitable for: JS200, JS210LC, JS205LC, JCB 220LC Xtra
JCB 30Plus JS205LC & JS205, JCB NXT 205LC JCB NXT 205LC, JCB NXT 215LC

ATTACHMENTS 17
 EXCAVATOR CRUSHER BUCKET EXCAVATOR EXCAVATOR BUCKET
ORANGE PEEL GRAB

- 0.60 cu.m capacity with weight of 2465 kgs. Crusher bucket is - Orange peel grab fitted on 20 ton excavator is a perfect - Floating bush arrangement between dipper and bush increases
a cost effective solution for turning demolition rubble and site attachment for solid waste management and steel scrap handling life of pins & bushes. Available in various sizes to suit different
waste into useable material, eliminating hauling and disposal industry. applications.
costs.
- Powered by the 20/21 ton excavator and travelling with the - Comes with 5 tines , hydraulic cylinders are fitted with replaceable - Wear resistant HARDOX material in JS140 & JS200/210
excavator, the crusher bucket eliminates the need to transport, piston rod protection and are hydraulically cushioned. buckets.
hire or purchase and maintain separate mobile crushing
equipment. - Oil distribution and hydraulic hoses are protected in the carrier. - Hard facing as standard in JS140 & JS200/210 buckets to get
higher life.
- Adjustable jaw gap of 20-120 mm , crushes a wide range of sizes - Reinforced tines are made of wear resistant steel of HB 400. Easy
and types of material, including brick, concrete and rock. Even accessible greasing points. - Robust tooth and pin locks increase durability of consumables.
material with reinforcing bar can be crushed, so the steel can
be recovered for scrap. This feature is not available with other - Weld on tips made of high resistant forged and tampered steel of - Bolt on side cutters are optional for enhancing excavation
mobile crushers. HB 500. capability.
- Capability to handle soft rock of 315 mm and 225 mm of hard - Accurate fittings eliminate tine distortion, solid end stops ( open &
rock.
close). reinforced bolts, large
- Heavy duty fly wheel storage energy makes optimum use of
machine’s hydraulic power and generates a sustained crushing
action for highest productivity.
- Heavy duty construction, well developed design, JCB crusher
buckets have been developed and proven over the last 7 years.
Application Technical parameters Application Technical parameters
Application Technical parameters Solid waste management - Unloading Width closed : 1370 mm Mining - Loading & unloading Sizes available : 0.5 cu.m, 0.9 cu.m,
Road - demolition, stone crushing Weight : 2465 kgs steel & foundry - Scrap handling Opening range : 1910 mm 0.90 cu.m HD,
Road construction
for GSB material Capacity : 0.6 cu.m Volume : 450 litres 1.02 cu.m GP
Paper mills - Unloading timber from Solid waste management - Loading
Realty sector - Demolition, stone Adjustable jaw gap : 20 - 120 mm high body trucks and trailers Weight : 950 kgs
crushing Number of tines : 5
Ports - Unloading material from
Quarry - Stone crushing containers

Suitable for: Suitable for: Suitable for:

JS200, JS210LC, JS205LC, JCB 220LC Xtra JS200, JS210LC, JS205LC, JCB 220LC Xtra JS200, JS210LC, JS205LC, JCB 220LC Xtra
JCB NXT 205LC, JCB NXT 215LC JCB NXT 205LC, JCB NXT 215LC JCB NXT 205LC, JCB NXT 215LC

18 ATTACHMENTS
 WHEEL LOADER DOZER BLADE WHEEL LOADER SKID STEER LOADER
SIDE DUMP BUCKET PATCH PLANER

- Easy design for conversion of wheeled loader to wheeled dozer. - Designed for safe and accurate placement of in fill materials. - Patch planers milling solutions for damaged concrete or asphalt
surfaces.
- Bi-directional operation helps grading action both in forward and - Available in left hand dump options.
reverse for optimum grading. - Electro-hydraulic adjustment of side shift, tilt and depth functions
- Designed to operate from the loader auxiliary service. ease the cutting job.
- Dozer blade moves and pushes large amount of material quickly
and easily, accomplishing jobs that would otherwise require - Allows the operator to face the traffic and reduces potential traffic - Independent self-levelling depth adjustment plates allow for
dedicated equipment. hazards. precise lapping cuts and taper cuts.
- Semi U-shape design blade for providing strength and to achieve - Best suited for tunnel applications. - Wheels are removable allowing working next to curbs.
optimum output. - Option available for JCB 455ZX with 2.68 cum capacity. - High flow machine required for better performance.
- Usage of dozer blade in mines, construction sites and quarries
helps to increase life of tyres and reduces parts consumption of
allied equipment working at the site.

Application Technical parameters Application Technical parameters Application Technical parameters

Backfilling around foundations Width : 2508 mm Road construction - Tunnel SAE rated capacity : 1.8/2.68 cu.m Industry Overall width : 1320 mm
Trenches Height : 1032 mm application, hilly terrain Material density : 1900 kgs/m3 Road construction Planing width : 305 mm
Weight : 630 kgs Front cutting edge : 2890/3300 mm Planing depth : 0-127 mm
Landscaping Crusher plant - Confined area,
hopper loading Height : 817 mm
Drum diameter : 482 mm
Weight : 482 kgs
Suitable for: Suitable for: Suitable for:
JCB 430ZX, 432ZX 432ZX, 455ZX SSL135, SSL155

ATTACHMENTS 19
 SKID STEER LOADER SKID STEER LOADER SKID STEER LOADER
6-IN-1 SHOVEL PALLET FORK FORK MANURE

- 6-in-1 bucket of 0.40 cu.m with width of 66” maximises loader - 1200 mm pallet fork enables machine to be utilised for loading & - Fork manure of 66” width is designed for better handling of
productivity giving the operator a wider choice of options. stacking object with single ram.
- The options are dozing, loading, digging, grabbing, spreading and - Pay Load as per the machine lifting capacity. - Fitted with top grab that aids material retention.
grading.
- Load guard offers greater operator safety. - Top grab allows material wider than the unit which are to be
- Teeth and toe plate options for even longer service life. clamped.
- Quick hitch mount with quick release coupling for rapid
- Quick hitch mount with quick release coupling for rapid changeover time, increases production time. - Designed to provide great visibility to end of fork tines.
changeover time, increases production time.
- Made of high quality reliable steel. - Hardened cylinder pins and end plates for long life durability.
- Hardened cylinder pins and end plates for long life durability.
- Quick hitch mount with quick release coupling for rapid
changeover time, increases production time.

Application Technical parameters Application Technical parameters Application Technical parameters

Industry Width : 66” Industry - For stacking palletized Lift capacity : SSL 135 - 612 kgs Industry Width : 66”
Road construction Capacity : 0.40 cu.m load Lift capacity : SSL 155 - 703 kgs Road construction Lift capacity : SSL 135-500 kgs
Weight : 323 kgs Port - Stacking palletized load Fork length : 1200 mm Lift capacity : SSL155-600 kgs
Realty Agriculture
Opening : 1252 mm

Suitable for: Suitable for: Suitable for:

SSL135, SSL155 SSL135, SSL155 SSL135, SSL155

20 ATTACHMENTS
 SKID STEER LOADER SKID STEER LOADER SKID STEER LOADER AUGERS
INDUSTRIAL GRAPPLE SWEEPER COLLECTOR

- Very effective attachment for different applications i.e. solid waste - JCB sweeper collector makes the work of site clean-up easy by - JCB augers provide high torque allowing you to drill with speed
management, sugarcane industry, small log handling etc. sweeping, collecting and dumping dirt and debris. and precision in the toughest of ground conditions.
- The solid bottom bucket and dual independent grapples hold - Capable for full width sweeping of 60” /1525 mm. - Heavy-duty planetary gear reduction design provides long life
irregularly shaped material securely in place. with minimal service and maintenance costs.
- Hydraulically controlled collection hopper is operated from the
- Heavy-duty construction and cylinder guards provide increased cab. - The auger drive unit is completely sealed in an oil bath for
protection and durability in harsh applications. continuous lubrication.
- Combination steel and polypropylene brush for superior
- Hardened cylinder pins and end plates for long-life durability. sweeping finish. - Wide range of rock duty and heavy duty auger flights are available
to suit various applications. 9”-24” BACKHOE LOADER
- Quick hitch mount with quick release coupling for rapid - Gutter brush for curb cleaning and water sprinkler for dust
changeover time, increases production time. suppression as standard. - Reverse rotation for quick back out and aids in shedding material
from the contact with a large immovable object.
- Quick hitch mount with quick release coupling for rapid
changeover time, increases production time. - Quick hitch mount with quick release coupling for rapid
changeover time, increases production time.

Application Technical parameters Application Technical parameters Application Technical parameters

Industry Width : 66” Industry Overall width : 74.4”/1890 mm Electrical poles Output shaft : 2 inch
Road construction Lift capacity : 400 kgs for 135 Road construction Working width : 60”/1524 mm Plantation Hyd flow range : 25~60 lpm
500 kgs for SSL155 Capacity : 0.46 cu.m Output speed : 55~ 60 rpm @ 60 lpm
Agriculture Industry fencing
Opening : 1000 mm Weight : 381 kgs
Weight : 381 kgs appro

Suitable for: Suitable for: Suitable for:

SSL135, SSL155 SSL135, SSL155 SSL135, SSL155

ATTACHMENTS 21
 SKID STEER LOADER BACKHOE LOADER SKID STEER LOADER
VIBRATORY ROLLER VIBRATORY ROLLER SNOW BLOWERS

- Produces up to 3538 kgs of dynamic force for an excellent - Max flow-25 LPM (As suggested hydraulic team). - The JCB snow blower range features 2 stage design with the
compaction performance. ability to throw snow 25~40 ft away.
- Max pressure – 90 bar (As suggested hydraulic team).
- Adjustable scraper blade between the frame and drum ensures - A poly-lined chute and deflector are easily adjusted to direct the
smooth and uniform compaction. Motor pressure & return Port: snow discharge. Manual adjustments reduce maintenance cost.
- Hydraulic drive motors are protected and isolated to provide - Flange type fittings LK 35 (4996/10359). - The 25” (635 mm) standard flow shroud openings allow high
maximum performance and reliability. Hose details: volumes of snow to be moved quickly.
- Drum oscillates +/- 15º for compaction on uneven terrain. - Hose size - ½” BSP. - Available in 84” (2134 mm) working width model with excellent
visibility.
- High flow machine required for better performance and - End fitting - Elbow - Female x Female - straight.
productivity. - The direct drive hydraulic motor design eliminates unnecessary
- Length - Need to check with M/C. moving components, promoting less wear and longer life.
- Quick hitch mount with quick release coupling for rapid
changeover time, increases production time. Motor drain line: - Includes adjustable skid shoes and bolt-on replaceable wear-
resistant tapered steel edge and quick release coupling for rapid
- Drain line circuit required for BHL M/C. changeover.
- Motor drain line Port – ¼” BSP Female port.

Application Technical parameters Application Technical parameters Application Technical parameters

Road - Road patch work, Overall width : 72 inch, 1829 mm Compaction Drum weight : 417 kgs Fresh snow clearing Effective cutting width : 2058 mm
shoulder compaction Operating weight : 975 kgs Drum widtht : 800 mm Cutting height : 635 mm
Realty sector - Foundations Drum width : 66 inch, 1676 mm
Drum oscillation : 15 deg Drum diameter : 580 mm Auger diameter : 355 mm
Construction - Trench Drum diameter : 24” Drum tickness : 12 mm Weight : 320 kgs
compaction Dynamic force : 3538 kgs
Vibrating speed : 2600 mm/s

Suitable for: Suitable for: Suitable for:

SSL155 SSL135, SSL155 SSL135, SSL155

22 ATTACHMENTS
 SKID STEER LOADER SHOVEL SKID STEER LOADER TELEHANDLER
DOZER BLADE MAN PLATFORM

- General purpose shovel with width of 60” for SSL135 and 66” - The JCB dozer blade will convert your skid steer or track loader - Man platform transforms a telehandler into an Aerial Work
for SSL155 is designed for maximum performance and durability. into a compact bulldozer. Platform (AWP) by lifting workers, tools and materials to height
- Special narrow shovel of 0.32 cu.m with width of 54” for work in safely and quickly.
- It moves and pushes large amount of material quickly.
narrow and confined spaces. - Inclinometer provided in the cab to give the longitudinal angle.
- It finds application at construction sites and road projects.
- Teeth and toe plate options for even longer service life. - Safety restraints, tie down bar standard on all man platforms.
- Quickhitch mount for rapid changeover, increase production - Safe & reliable attachment to be used in projects and process
time. industries for maintenance jobs at height.
- Safety is ensured by providing opening of gate inside and closing
of gate automatically.
- Capable to safely carry 2 persons with 400 kgs of material.
- Tool carrier mount & Q fit for versatility, rapid changeover and
increased production time.

Application Technical parameters Application Technical parameters Application Technical parameters

Industry Width : 54” 60” 66” Backfilling around Width : 1644 mm High rise building Width : 2500 mm
Road construction Capacity : 0.32 cu.m, 0.36 cu.m, foundations Length : 35 mm Industry Height : 1290 mm
0.40 cu.m Trenches Height : 527 mm Depth : 1500 mm
Agriculture Maintenance jobs at height
Weight : 184 kgs, 196 kgs, 210 kgs Landscaping Weight : 114 kgs Weight approx : 380 kgs

Suitable for: Suitable for: Suitable for:

SSL135, SSL155 SSL135, SSL155 530-70, 530-110

ATTACHMENTS 23
 TELEHANDLER COAL BUCKET TELEHANDLER TELEHANDLER
GENERAL PURPOSE SHOVEL GRAIN BUCKET WITH NYLON TOE PLATE

- Best suited for handling broken coal having density up to 900 Kg/ - Efficient re-handling of loose material like sand, gravel, concrete - 2 cu.m capacity bucket to handle lightweight material such as
cu.m max and lighter material. etc. grains and agriculture.
- Rolled back shell with spill guard for easy release of material. - Std. bucket capacity: 1.2 cu.m & 0.9 cu.m on 530-70 & 530-110 - Rolled back shell for easy release of material.
respectively.
- Heavy duty toe plate & wear strips for longer life. - Replaceable nylon toe edges- prevent damage to grains.
- Toe & side wear plate gives long lasting protection and minimal
- Wear strip for added protection. wear. - Heavy duty toe plate for longer life.
- Tool carrier & Q fit compatibility for versatiling , rapid change - Rolled back shell for easy material ejection. - Tool carrier mount & Q fit for versatility,rapid changeover and
over and increased production time. increases production time.
- Tool carrier & Q fit compatibility for versatility, rapid change
over and increased production time. Wear strips for added
protection.

Application Technical parameters Application Technical parameters Application Technical parameters

Coal handling Shipping height : 1250 mm Industry 530-70 530-110 Grain handling Width : 2375 mm
Lighter material Shipping width : 2375 mm Road construction Height : 900 mm 800mm Height : 1180 mm
Potato handling
handling Capacity : 1.9 cu.m Realty Width : 2375 mm 2375 mm Depth : 1686 mm
Weight approx : 656 kgs Capacity : 1.20 cu.m 0.90 cu.m Weight approx : 540 kgs
To fit : Tool Carrier Tool Carrier Capacity : 2 cu.m
Weight : 470 kgs 410 kgs

Suitable for: Suitable for: Suitable for:

530-70, 530-110 530-70, 530-110 530-70

24 ATTACHMENTS
 TELEHANDLER TELEHANDLER TELEHANDLER
LOADING/UNLOADING BUCKET INDUSTRIAL FORK COTTON HANDLING BUCKET

- Appropriate attachment to be used in truck unloading - JCB India has a wide range of Forks suitable for Telehandler to be - Choice of high strength hardox tines to suit cotton applications.
applications. Bucket width 1.8 m which is less than the standard used in different applications.
- High strength side tines to minimise spillage.
Punjab body truck’s width i.e 2.0 m. - Industrial Fork is supplied as standard with the Telehandler
machine that can be used to handle palletized loads efficiently. - Excellent visibility for handling cotton efficiently.
- Makes the operation faster and more economical.
- Narrow fork of 1000mm is designed especially for loading and - Tool carrier & Q fit mount for - Versatility, rapid changeover and
- Reduces dependency on manpower, used in truck unloading unloading of material from the narrow vehicles and trucks. increased production time.
operations. - Narrow fork is also available with twin rollers that helps to handle
load with more ease & better machine stability.
- Well tested bucket geometry meant for unloading operations.
- Safety guard on Narrow fork frame supports to carry higher
- Tool carrier & Q fit compatibility for versatility, rapid change dimensional cartons on Pallets.
over and increased production time. Wear strips for added - For use in Bottling industries JCB Attachments offer Narrow fork
protection. with side shifter.
- Hydraulic side shifter on the frame helps for the lateral(sideways)
movement of the load from the cabin itself for optimum space
utilisation.
- All the forks are tool carrier & Q fit compatible for faster
changeover.

Application Technical parameters Application Technical parameters Application Technical parameters

Truck unloading Height : 852 mm Industry & Port - Handling Narrow fork Industrial fork Cotton handling Width : 1800 mm
Husk handling Width : 1800 mm palletized loads Height : 1067 mm
Width of carriage : 900 mm 1350 mm
Depth at bottom : 921 mm Construction sites Depth : 1445 mm
Ash handling Length blades : 1067 mm 067 mm
Capacity : 0.9 cu.m Bottling industry
Sand handling Weight approx : 204 kgs 224 kgs Weight approx : 410 kgs
Weight approx : 326 kgs

Suitable for: Suitable for: Suitable for:

530-70, 530-110 530-70, 530-110 530-70, 530-110

ATTACHMENTS 25
 TELEHANDLER TELEHANDLER TELEHANDLER
HD FORK WITH GRAB BUCKET WITH GRAB SUGARCANE GRAB

- Excellent attachment for unloading loose material i.e cotton, solid - Heavy duty units with twin ram grapple. - Heavy duty Structure of Sugarcane Grab to face high stresses
waste etc by grabbing. - Supplied with top grab for clamping bulky and uneven loads. during Grabbing and Clamping operation.
- 1.8m width offers excellent side clearance to unload from Punjab - Bolton toe plate gives long lasting protection and minimal wear. - Specially designed for sugarcane handling, when optimum
body trucks from rear. productivity and efficiency is essential during the harvest season
- Appropriate attachment to be used in solid waste projects, log of sugarcane.
- Tool carrier & Q fit versatality rapid changeover and increased grapping and process industries.
production time.
- Sugarcane Grab helps to enhance both durability and
- Tool carrier mount for versatility, rapid changeover and increased
production time. serviceability. Maintenance access to all components of the
Attachment is achieved with ease.
- Hoses fitted with quick release coupling as standard - ready-to-go
to work. - Large capacity of handling material in every pass reduces fuel
cost, cutting down on wear and tear and overall maintenance of
- Only for tool carrier. 1400mm width is available. the machine.

Application Technical parameters

Sugarcane handling Part no. : 336/E7955
Application Technical parameters Application Technical parameters
Bamboo handling Height closed : 1373 mm
Industry Width : 1800 mm Solid waste handling Q fit Narrow Q fit Tool
bucket Bucket Carrier Agriculture Height opened : 1888 mm
Construction sites Opening : 1230 mm Tyres handling
Depth : 1392 mm
Weight : 707 kgs Paper industry Height full open : 1554 mm 1554 mm
Width : 1800 mm 2350 mm 1400 mm Width closed : 1416 mm
Capacity : 0.8 cu.m Bamboo industry Capacity : 1.2-1.3 cu.m 1.6-1.7 cu.m Rated capacity : 1.4 cu.m max
Weight approx : 635 kgs 727 kgs
Weight approx : 562 kgs

Suitable for: Suitable for: Suitable for:

530-70, 530-110 530-70, 530-110 530-70, 530-110

26 ATTACHMENTS
 TELEHANDLER POWER GRAB TELEHANDLER TELEHANDLER
SINGLE DRUM HANDLER UNLOADING RAKE

- Power grab is structured in a way to face stress due to grabbing - Fork mounted single drum handler is a safe & reliable attachment - JCB unloading rake with 5.3 m long frame & 4 ft wide straight
and clamping. to be used in projects for handling oil & grease drums. plate is best suited for unloading of loose material such as scrap,
soil, wood chips, agricultural and building waste.
- Heavy duty tines of lower fork of grab slide over the ground - Speedy drum and barrel handling operation.
during push piling action. - Unloading rake is suitable to drag out material from side
- Spring loaded metal arms for tight and secure grip. closed truck,trolley and ISO 20’ and 40’ containers.The rake is
- KV tines of upper fork having internal curved surface for smooth approximately 5.3 m long and when mounted on 530-110 is
follow of the canes/bamboos while pressing and holding. - Efficient and safe design for loading and unloading of bulk drum
handling. capable of removing almost all the contents of a 40’ container
- Powerful double acting hydraulic cylinders ensure excellent with ease.
material retention on the grab. - Tool carrier & Q fit compatibility for versatiling , rapid change - High yield steel blade and rolled leading edge resulting in low
over and increased production time. weight, highly durable units with optimum performance.
- Robust heavy duty power grab having multiple top and lower
teeth / tines to allow dirt etc to be shaken off. - Bolt-on type front plate provides an option to use alternative
blades which may be fabricated locally and fitted to better suit
- Replaceable heavy duty tines for longer life of the Attachment. special applications.
- Tool carrier & Q fit mount for - Versatility, rapid changeover and - Smooth rounded surface prevents material retention and spillage.
increased production time.
- Available in both 4 m and 5.3 m long frame.
- Tool carrier & Q fit mount for versatility, rapid changeover and
increased production time.

Application Technical parameters Application Technical parameters Application Technical parameters

Construction sites Width : 2235 mm Drum handling Width : 670 mm Unloading side closed trucks Width : 1522 mm
Industry Height : 1075 mm Oil depots Height : 110 mm Scrap & waste handling Height : 900 mm
Depth : 1060 mm Depth : 1250 mm Horizontal reach : 5.3 m
Realty sector Construction site Building waste
Capacity : 1.6 cu.m Weight approx : 55 kgs Weight approx : 549 kgs
Weight approx : 594 kgs

Suitable for: Suitable for: Suitable for:

530-70, 530-110 530-70, 530-110 530-70, 530-110

ATTACHMENTS 27
 TELEHANDLER GRAIN PUSHER TELEHANDLER TELEHANDLER
CRANE HOOK - FORK MOUNTED ROTATOR FORK

- JCB grain pusher is especially designed to be used for grain - Enhances utility for lifting & shifting of suspended loads as in pick - The JCB Rotator Fork is designed for effective & efficient
storage. & carry crane. dumping or rotating high capacity loads at foundaries,raw material
industries and Solid Waste Management.
- 3200mm long attachment is used for pushing grain for optimum - Maximum safe lifting capacity : 2 tonnes ( tested & certified to
use of grain storage capacity. industry standard). - Rotator Fork has the ability to quickly rotate, dump and then
immediately return the forks to the pick up location in one
- Box section frame construction for extra strength and minimum - High visibility while lifting bulky & uneven materials. continuous motion.
weight.
- Supplied with retain bar & pins for easy & safe mounting on forks. - It has the feature to dump load up to 2T at any angle as per the
- Especially useful for operating over above floor dying ducts. requirement depending on dumping profile & return back to the
- Tool carrier mount & Q fit for versatility, rapid changeover and dumping position without any need to complete the full rotation.
- No flat edges allow free fall of grain. increased production time.
- Easy access to the motor & gear box driven motor for the
- Tool Carrier & Q fit compatible for faster changeover. - Fork mounted for easy mounting. maintenance
- Designed with high visibility frame to give the operator best
visibility to avoid any accident.
- Quick hitch mount for rapid changeover, thus increases
production time.
- Tool carrier & Q fit mount for versatility, rapid changeover and
increased production time.

Application Technical parameters Application Technical parameters Application Technical parameters

Grain Handling Blade size : 2320*825mm Industry Weight approx : 38 kgs Foundries Pay load : 2T
Length : 3200 mm Construction sites SWM bin handling Max. torque : 870 Nm
Weight approx : 538 kgs Truck unloading Raw material handling Rotator speed : 5 rpm @ 40 ltr
Horizontal reach : 10.2 mtrs Weight approx : 374 kgs

Suitable for: Suitable for: Suitable for:

530-70, 530-110 530-70, 530-110 530-70, 530-110

28 ATTACHMENTS
 TELEHANDLER TELEHANDLER UNIVERSAL BUCKET
CONCRETE BLOCK HANDLER ROUND BALE CLAMP

- The laterally adjustable Block Handler facilitates the handling of - The round bale clamp is a “clap hand” bale grab suitable to handle - Can be fitted on machines other than JCB excavators of 20
pallet less concrete blocks or bricks effortlessly and in a more the round bales of cotton up to 1T. tonne as well with suitable bushes.
organized manner. - Hard face, replaceable floating bush & tooth tip.
- Designed in such a way that no damage is being done to the
- The Concrete Block Handler consists a pair of adjustable straight wrapped and unwrapped bales. - Wear resistance HARDOX 400 used for contact surface.
arms with wide opening range of 410-1860 mm that ensures the
safe and efficient handling of load. - Double acting ram with check valve for maximum safety at the - Operational ease to change the bucket on competition machine.
worksite.
- Inner side of the arms are equipped with replaceable PU pads for
effective holding of the material eliminating the chances of slippage. - Independent movement of both the arms helps to aid stacking in
confined areas.
- High tensile & wear resistant PU pads can withstand the stress
generated due to the load up to 2T. - Tool Carrier mount & Hoses with QRC for Rapid change over
time.
- Designed with narrow frame of 1150 mm to easliy access the
conjusted & narrow worksites or vehicles with maximum - Tool carrier & Q fit mount for versatility, rapid changeover and
productivity. increased production time.

- Hoses with QRC for Rapid changeover time.

- Tool carrier & Q fit mount for versatility, rapid changeover and
increased production time.

Application Technical parameters Application Technical parameters Application Technical parameters

Construction site Pay load : 2T Handling bales Pay load : 1T Digging trenches Front cutting edge : 1222 mm
Brick handling Arm opening : 410-1860 mm Weight approx : 160 kgs Holes Weight : 984-982 Kgs
range Opening range : 670 to 1650 mm Foundation Capacity : 0.9 Cu.m
Arm length :1324 mm Handling soil in quarry
Weight approx : 750 kgs Mining river beds

Suitable for: Suitable for: Suitable for:

530-70, 530-110 530-70, 530-110 JS205, JS210, JS215, JS225

ATTACHMENTS 29
 GRANITE BUCKE QUICK HITCH-
TRACKED EXCAVATOR

- Design for safe and accurate placement of in fill materials. - Heavy duty lifting eye. High strength material, CE tesed and
certified.
- Available with hardfacing options.
- The rear safety lock is the secondary safety feature backed up by
- Designed to fit on competitor 20T Machine. two powerful springs and a positive locking system which retains
the attachements rear pin in case of cylinder faliure.
- Operate from the standard auxiliary given with the machine.
- Painted front and rear hooks make them highly visible from
- Allows the operator to change the bucket on competitor machine within the cab
with bush & pin.
- Powerful spring activited safety locks work in all conditions and
- Best suited for excavator applications. environments unlike gravity systems.
- Variable pin centre design making the hitch suitable for use with a
variety of attachments.
- Hith is open to dispel material prwevening build up.
- Low maintenance.
- Zero grease points.
- Front safety lock is forcewd on into default position by a spring
retaining and locking the attachment pin.

Application Technical parameters Application Technical parameters

Digging trenches, holes, Weight : 1150 kg Quarry-Secondary breaking Width : 340 Kg
foundation, handling soil in quarry Capacity : 0.9 cu.m Pipe & cable laying - Trenching Hitchlifting eye rated load : 17000 Kg
and mining river beds Front cutting : 1264 mm Road & realty sector - Foundation Pin diameter : 80 mm
work & demolition Minimum centers : 415 mm
edge
Foundation work Maximum centers : 530 mm

Suitable for: Suitable for:

JS220 JS205, JCB215, JCB220

30 ATTACHMENTS
JCB PARTS ACCESSORIES

LEVER ACTION BARREL PUMP

(HEAVY DUTY)

PART NO. 24 V DC ELECTRIC DIESEL PUMP PETROL DIESEL FILTER BUCKET OIL PUMP
333/F7166
PART NO. DESCRIPTION PART NO. PART NO. DRUM CAPACITY
24V DC Pump assembly 333/F7167 333/F7169 16 litres / 4.23 gal.
400/N6086
with manual nozzle

NYLON TOOL BAGS ELECTRIC GREASE GUN SEAT COVER REAR LED WORK LAMP
PART NO. SIZE PART NO. PART NO. PART NO.
400/N6105 18" x 9" x 12" 450 x 230 x 300 mm 400/02216 JCB/SC/C 700/C8027

ATTACHMENTS 31
 Towards Industry’s finest customer support network

5 000+ 24x7
Support
Trained service 12 Languages
engineers

14 66
Operator training Dealers
centres

750+
Outlets

+
250
Service vans
5
Parts warehouses

32 ATTACHMENTS
 infinity /December-2021
JCB INDIA LIMITED 23/7 Mathura Road, Ballabgarh - 121 004 Haryana, India. Fax: 91 129 2309050
For more information SMS “JCB” to 56767 or Call 1800-1037-386 Website: www.jcb.com

Actual product may vary in shape, size & colour from the shown images. The accessories shown may not be part of the standard equipment. JCB India reserves the right to change specifications without prior notice.
34 ATTACHMENTS