20.7.23 - Builders Resources Daily Progress Report
20.7.23 - Builders Resources Daily Progress Report
20.7.23 - Builders Resources Daily Progress Report
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
Remarks:
1.0 20-Jul-23 IFR Issued for Information M. Bliss N. Uche N. Shidda Henry O.
Approved by Approved by
Rev. Rev. date Status Description Issued by Reviewed by
(BRNL) (SNL)
BUILDERS RESOURCES NIG. LTD.
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
TABLE OF CONTENTS
TABLE OF CONTENTS
1. EXECUTIVE SUMMARY .................................................................................................................... 3
2. HSE ................................................................................................................................................. 4
4. POB ................................................................................................................................................. 5
5. MAN-HOURS ................................................................................................................................... 6
7. WELD SUMMARY............................................................................................................................. 6
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
1. EXECUTIVE SUMMARY
1.1 Key Achievements:
Work
Activity Description Start Date End Date Remark
Completion
90.00%
80.00%
70.00%
60.00%
50.00%
40.00%
30.00%
20.00%
10.00%
0.00%
4. Variance -7.32%
The reason for the negation on the variance was because the day’s
5. Reason for Variance actual input as compared to the day before was less than the day’s
forecast.
BUILDERS RESOURCES NIG. LTD.
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
6. HSE
Permit to work 1 7 7
JSA 0 2 2
SSHE Induction 0 4 9
Safety Inspection 0 4 7
Environmental/hygiene Inspection 0 1 2
Audits/Assessment 0 0 0
Unsafe Acts/Conditions 0 20 28
Safe Acts/Conditions 0 9 11
Safety/Quality walkthrough 0 2 4
Safety/Management Walkthrough/Tours 0 0 0
Hazard Hunt 0 3 5
Emergency drills 0 0 0
Safety Sharing 0 0 0
Fatality (FAT) 0 0 0
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
FIRE Incident 0 0 0
Remark:
Tool-box Topic:
The Effects of dust during House-keeping.
6.1 There has been no safety or security incident as of today. No First Aid and no Lost Time Injury.
6.2 All Fitters are properly and adequately kitted-up with their PPE(s)
7. Areas of Concern
7.1 HEA 180 Beams needed ASAP to be delivered to our fabrication yard to proceed/conclude with the
Deck Extension Pre-Fabrication works.
7.2 The 4 sheets of 990 x 6m Gratings supplied to BRNL is not enough for cut-out as per the approved
drawing for fabrication of module P5 New Deck Extension and Access platform, (9+2 = 11) sheets of
same length (990 x 6000mm) still needed for the gratings. We are expecting to see the remaining
(5+2 = 11) sheets of the gratings ASAP, to facilitate the next day’s activities.
7.3 Delay in supply of other materials (such as Pipes, Angle Irons, RHS, Gratings, Wire mesh, etc) for
Deck Extension, Access Platform and Radiation Shield fabrication is resulting to an unproductive
man-hours which is having a negative impact on the schedule.
7.4 Awaiting response to the Review of Issued Fabrication Procedure from SNL.
8. POB
Project personnel as on date include the following:
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
TOTAL 8
9. MAN-HOURS
DATE START TIME FINISH TIME HOUR DIFF. POB TOTAL HOURS
If NO, please explain briefly below why the Project work is not on schedule?
[The project Schedule is being revised and will be submitted soon]
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
Fabrication Site BUILDERS RESOURCES FAB. YARD, PORT HARCOURT Syst./Unit SS Doc.Type REP
14. PICTURES
1.1.6 Qualifications
Conduct WPS/PQR Qualification Test 1 60.00%
Welders Qualification & Certification 1 62.00%
Painting Procedure Qualification (Pull Test) 1 100.00%
Document Review 1 55.00%
Blasters/Painters Qualification & Certification 1 0.00%
1.2 Fabrication Readiness
Pre-Mob Inspection/Meeting 1 100.00%
Receipt of CPY Approval to Commence Fabrication 1 80.00%
NEW PLATFORM EXTENSION FABRICATION 3,648.96 2,024.05 2,024.05 1,614.97 1,614.97 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9.60% 2.58% 12.19%
1.2.1 NG-APK-13-000314-P5-NPE-CLD-001 3 HEA 200 BEAM CLASS 5.00 680.52 680.52 680.52 680.52 680.52 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A01 HEA 200 BEAM CLASS 4290mm 2 362.93 362.93 362.93 362.93 362.93 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 60.00% 85.00%
"" A02 HEA 200 BEAM CLASS 2410mm 2 203.89 203.89 203.89 203.89 203.89 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 60.00% 85.00%
"" A08 HEA 200 BEAM CLASS 2688mm 1 113.70 113.70 113.70 113.70 113.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
1.2.1 NG-APK-13-000314-P5-NPE-CLD-001 3 IPE 180 BEAM CLASS 18.00 525.38 525.38 525.38 525.38 525.38 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A03 IPE 180 BEAM CLASS 2410mm 1 45.39 45.39 45.39 45.39 45.39 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A06 IPE 180 BEAM CLASS 1174mm 2 44.14 44.14 44.14 44.14 44.14 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 60.00% 85.00%
"" A07 IPE 180 BEAM CLASS 1307mm 2 49.14 49.14 49.14 49.14 49.14 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A04 IPE 180 BEAM CLASS 4290mm 1 80.65 80.65 80.65 80.65 80.65 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A05 IPE 180 BEAM CLASS 1788mm 2 67.23 67.23 67.23 67.23 67.23 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A09 IPE 180 BEAM CLASS 1642mm 1 30.87 30.87 30.87 30.87 30.87 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A10 IPE 180 BEAM CLASS 1567mm 1 29.46 29.46 29.46 29.46 29.46 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A11 IPE 180 BEAM CLASS 697mm 1 13.10 13.10 13.10 13.10 13.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A12 IPE 180 BEAM CLASS 845mm 2 31.77 31.77 31.77 31.77 31.77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A13 IPE 180 BEAM CLASS 1529mm 4 114.98 114.98 114.98 114.98 114.98 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
"" A14 IPE 180 BEAM CLASS 992mm 1 18.65 18.65 18.65 18.65 18.65 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00% 0.00% 25.00%
1.2.1 NG-APK-13-000314-P5-NPE-CLD-001 3 HEA 180 BEAM CLASS 4.00 114.42 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" A15 HEA 180 BEAM CLASS 837mm 1 29.71 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" A16 HEA 180 BEAM CLASS 992mm 1 35.22 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" A17 HEA 180 BEAM CLASS 1394mm 2 49.49 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
1.2.1 NG-APK-13-000314-P5SHR-PMD-001 2 PIPES 69.00 297.95 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B01-1 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 5480mm 3 66.58 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B01-2 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 6 36.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B01-3 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 3 15.35 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B03-1 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 24.12 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B03-2 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 2 12.15 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B03-3 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 2 10.23 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B05-2 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 20.76 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B05-3 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 2 10.73 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B07-1 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 19.35 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B07-2 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 14.15 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B09-1 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 7.84 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B09-2 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 16.65 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B11-1 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 12.78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B11-2 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 2.84 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B11-3 PIPE Ø48.3 X3.68mm (1.5" SCH 40) 1 5.12 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B13 PIPE Ø60.4 X 4mm (2" SCH 40) HANDRAIL PIPE SOCKET 3675mm 21 19.99 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B16 PIPE Ø60.3 X 4mm (2" SCH 40) HANDRAIL PIPE SLEEVE 25mm 21 2.86 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
1.2.1 NG-APK-13-000314-P5SHR-PMD-001 2 PLATES 54.00 163.14 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B02-1 PLATE KICK 3090 X 150 X 6mm THK 3 65.48 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B04-1 PLATE KICK 3515 X 150 X 6mm THK 1 24.85 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B06-1 PLATE KICK 2740 X 150 X 6mm THK 1 5.12 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B08-1 PLATE KICK 1110 X 150 X 6mm THK 1 4.15 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B10-1 PLATE KICK 1725 X 150 X 6mm THK 1 6.62 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B12-1 PLATE KICK 1102 X 150 X 6mm THK 1 7.78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B14 PLATE Ø50 X 12mm THK CLOSURE PLT 21 4.94 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B15-1 PLATE 200 X 145 X 12mm THK STIFF. PLT. 11 30.05 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B15-2 PLATE 210 X 90 X 12mm THK STIFF. PLT. 4 7.12 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B15-3 PLATE 270 X 97 X 12mm THK STIFF. PLT. 2 3.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B15-4 PLATE 138 X 35 X 12mm THK STIFF. PLT. 2 0.91 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B18 PLATE 320 X 50 X 4mm THK FLAT BAR 6 3.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
1.2.1 NG-APK-13-000314-P5SHR-PMD-001 2 BOLT & NUTS 48.00 48.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
Bolt & Nuts to be Procured Expected Received
"" B17 BOLT & NUT M10 BOLTS, NUTS & WASHER -HDG 42 42.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
"" B19 BOLT & NUT H- M12 X 40 + WASHER (CADMIUM PLATED) 6 6.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
1.2.1 NG-AKP-13-000314-P5GRT-PMD-001 3 GRATINGS 14.00 1,776.67 818.15 818.15 409.07 409.07 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.06% 0.00% 8.06%
" B20-1 GRAT'G 5230 x 900 x 32 x 5mm GRATING 3 613.61 613.61 613.61 306.80 306.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 17.50% 0.00% 17.50%
" B20-2 GRAT'G 3280 x 900 x 32 x 5mm GRATING 1 128.28 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
" B20-3 GRAT'G 4970 x 900 x 32 x 5mm GRATING 1 194.37 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
" B20-4 GRAT'G 4970 x 525 x 32 x 5mm GRATING 1 113.38 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
" B20-5 GRAT'G 1030 x 900 x 32 x 5mm GRATING 5 201.41 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00% 0.00% 0.00%
Page 1 of 7
Fabrication Progress Report for Thursday, July 20, 2023
Page 2 of 7
Fabrication Progress Report for Thursday, July 20, 2023
Page 3 of 7
Fabrication Progress Report for Thursday, July 20, 2023
Page 4 of 7
Fabrication Progress Report for Thursday, July 20, 2023
Page 5 of 7
Fabrication Progress Report for Thursday, July 20, 2023
Page 6 of 7
Fabrication Progress Report for Thursday, July 20, 2023
Page 7 of 7