Palera1n GUI Jailbreak Setup PDF

Download Palera1n GUI Jailbreak iOS 15 - 16 iPhone on Mac OS 2023-01-12, 10:32 AM
Download Palera1n GUI Jailbreak iOS

15 – 16 iPhone on Mac OS
The iOS 16 jailbreak is out! It’s the palera1n jailbreak iOS 15 – iOS 16 for
checkm8 devices. Many of you were waiting for the iOS 15 and the iOS 16
jailbreak; it’s finally here, along with the Palera1n GUI version.
So this is the detailed, step-by-step pale ra1n jailbreak guide to download

palera1n GUI jailbreak on macOS and jailbreak your device with that.
This new software also comes with the palera1n loader to jailbreak!
This is the complete palera1n jailbreak GUI guide for macOS from iOS 15 – 16
on various devices; the supported devices are below.
I have shown the complete step-by-step palerain jailbreak process

involving a jailbreaking device, installing sileo, and then installing tweaks.
What's Covered Below? [Show]
Palera1n GUI jailbreak macOS iOS 16 supported

devices
Supported iPhones Supported iPads Supported iPods
iPhone 6 / 6 Plus iPad Pro 12.9 (2015 / 2017) iPod Touch 6
iPhone 6S / 6S Plus iPad Pro 9.7 (2016) iPod Touch 7
iPhone 7 / 7 Plus iPad Pro 10.5 (2017)
iPhone 8 / 8 Plus iPad Air 2
iPhone X iPad 5 / iPad 6 / iPad 7
https://www.techacrobat.com/palera1n-jailbreak-macos-download/ Page 1 of 15
Pale ra1n jailbreak supported iOS versions

iOS 15 – 15.7.1 and iOS 16 are the supported iOS versions for the Palera1n
jailbreak.
The pale ra1n GUI jailbreak for macOS comes with tethered and semi-
tethered modes.
Palera1n Jailbreak Semi-tethered Mode

The semi-tethered mode comes with tweaks support; this mode takes
almost 10 GB of space on your device.
Therefore, using this mode is advised only when your device has at least 16
GB of storage. How would you install a specific mode? More on that later in
the jailbreaking process.
Palera1n Jailbreak GUI Tethered Mode

If you have a low-storage device, like a 16 GB device, you can proceed
with the tethered palera1n jailbreak mode.
As it’s a tethered mode, the device must be booted using a computer every
time. Otherwise, it won’t boot at all. But don’t worry! Use the irecovery -n
command to come out of the recovery mode; doing this will also remove
palera1n jailbreak.
Important Instructions: As it’s the checkm8 jailbreak before you follow

below, if you got the A10(X) and A11 devices, disable the passcode, touch id,
face id, or any other SEP functionality on your device. Do it right now so you
do not forget. And yes, after the jailbreak, you won’t be able to use the
passcode functionality directly on your device, but as you will be in the
jailbroken state, you can set the passcode on the palera1n device from this
tutorial.
Let’s start downloading the palera1n jailbreak GUI guide on mac to

jailbreak iOS 15 – 16 devices. This begins with installing prerequisites first,
which are essential packages and libraries.
Follow the step-by-step sections below; if you already have these

packages/dependencies installed on your mac, skip these. If you don’t
have it, don’t skip it; otherwise, you can’t jailbreak with palera1n GUI.
If you’re a Windows user, check here the complete guide for palera1n
windows jailbreak using Linux, and no problem getting the device out of DFU
mode.
Install HomeBrew for Palera1n Jailbreak iOS 15 –

16
Step 1. Go to this homebrew website, and copy the homebrew installation
code given in the centre of their website. I have added it below as well, the is
necessary to install palera1n gui jailbreak.
/bin/bash -c "$(curl -fsSL

https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)
"
Step 2. Open the terminal on your mac, paste the command, and hit enter;
it’ll now ask you to put in your mac login password, put that and hit enter. It
will install the homebrew on your computer and hit enter again if it asks you
on the terminal.
Step 3. If it shows you a homebrew installation error or permission error,

only then run this command in the terminal.
sudo chown -R $(whoami) /usr/local/Cellar
Step 4. Once homebrew installation is done, now I’ll install packages from it.
So copy and paste the below command in the terminal, and hit enter. It will
download and install the brew packages and wait for them to be completed.
brew install libimobiledevice libirecovery python
Step 5. If the above command gives any permission error, then again, as
stated above, run the below command and hit enter in the terminal.
sudo chown -R $(whoami) /usr/local/Cellar
Step 6. Now run these two commands below one by one in the terminal and
hit enter; put in your mac password if asked. These are changed for
Palera1n GUI jailbreak for macOS compared to Palera1n command-based
jailbreak.
Sudo pip3 install tk
Sudo pip3 install pillow
IMPORTANT: For iOS 16 Palera1n Jailbreak GUI

Users
The palera1n installation process will work to jailbreak iOS 16 with
palera1n, but you need to be on iOS 16, where you have never set the
passcode before on your device.
If you are in this state, you’re good to go; if you have the passcode right now,
OR you had it before but not now, in both cases, you need to restore your
device! and after the restore, DO NOT set the passcode on your device, then
proceed with the tutorial below for iOS 16 jailbreak. Moreover, you also
need to enable the developer’s mode on iOS 16; if you don’t know how you
do that, here is how to enable developers mode on iOS 16.
Let’s see below how to download palera1n jailbreak GUI and install it on
iPhone or iPad.
How to Download palera1n GUI jailbreak iOS 15 –

16 on macOS
Step 1. Download Palera1n Jailbreak GUI on macOS
Once the prerequisites are installed, you need to download Palera1n jailbreak
GUI for mac; you can get it here.
Just click on the skip button at the top right corner of this link, and it will
start the downloading from the next page, if not, click on the download
button. It’s a big file, big but complete.
Step 2. Open Palera1n jailbreak GUI and run commands
Double-click on the Palera1n GUI zip file, and it’ll extract it on your macOS,
then open the palera1n GUI folder; if you haven’t downloaded that yet, I have
provided the link above; you can download it from there.
Right-click inside the palera1n GUI folder and open a new terminal from
inside it.
After that, copy and paste this command below in the terminal and hit enter,
new before that, after running the same command, if you face any error
(people using newer macOS versions mostly face it), then remove the r from
the command and rerun it.
sudo xattr -rd com.apple.quarantine ./python
If you face an issue on a newer mac, the modified command is this -> sudo
xattr -d com.apple.quarantine ./python
After successfully executing the above command, copy and paste the
following command into the terminal and hit enter.
sudo chmod 755 ./palera1n
Step 3. Open System Preferences on Mac
Go to settings -> open system preferences -> security & privacy.
When it’s opened, close all the opened terminal on your mac, right-click on
the terminal icon on the dock and Quit it.
After that, click on the Full Disk Access option on the list on the left side in
the security & privacy window, click on the authentication lock button at the
bottom of the list, put in your mac password, and it’ll unlock the right side
window.
Now click on the + icon, select terminal from the next window and add that;
it’ll be added at the right side of the security & privacy window; now, you can
again hit the lock button. It’ll give it full disk access, which is necessary for
the palera1n GUI jailbreak.
Step 4. Open Palera1n GUI Software
Open the terminal again -> type cd then drag and drop the palerain GUI
folder on the terminal, and hit enter; you can also do it by just opening the
terminal from inside the palera1n folder by right-clicking.
Once the location is set to palera1n jailbreak GUI folder, now type the
following command and hit enter.
python3 palera1n.py
Once the above command is run, palera1n GUI will open on your screen! See
the image below.
Step 5. Connect your device and pair it
Now connect your device to the mac computer; once connected, click on
the Pair iDevice option on the palerain GUI software.
Once the device is successfully paired, you need to put it in the DFU mode;
this is the necessary part of installing palera1n jailbreak GUI; use the method
I shared below.
Step 6. Put the Device in DFU mode
I am using iPhone 7, and for it, I pressed and held both the power + volume
down buttons for 10 seconds; after 10 seconds, I left the power button but
kept holding the volume down button for the next 8 seconds. The device
went into DFU mode.
You can follow the same process; according to your device, put your device
into the DFU mode; it has to be in it; after your device is in the DFU mode,
then hit the enter button to run the command on the terminal.
People using the palera1n Linux method are facing the issue of the device
coming out of DFU mode during the jailbreak process; there is another way
to put the device in the DFU mode where it doesn’t come out of DFU mode,
which I have explained here in the palera1n Linux guide how to put iPhone in
DFU mode the right way, and it won’t come out of DFU mode!.
Step 7. Tethered or Semi-Tethered Pale ra1n GUI
After the device is in DFU mode, you need to click either the tethered
jailbreak button or the semi-tethered jailbreak button. Which one you should
use? I have advised this correctly above; depending on the available device
storage, you can read which one to use.
Click on the preferred jailbreak button now; once you click, a popup will
appear asking you to put in the iOS version your device currently has and
click on the OK button. See the image below.
Once you click OK after putting in the iOS version, the jailbreak process will
start, and you’ll also see the progress in the terminal.
This will take some time as it has to go through multiple things, especially
when it semi-tethered palera1n jailbreak GUI.
Going through the process, it may ask you to put the device in DFU mode
again, as you did earlier.
Once the palera1n jailbreak is done, you’ll see the message that the device
is jailbroken, see the image below; after that, your device will take some time
and will boot to the home screen, give it some time.
You’ll see the palera1n jailbreak logo on your device’s home screen, now, see
below how to install sileo with palera1n jailbreak loader, which I just
installed using palera1n GUI jailbreak.
Step 8. Install Sileo with Palera1n Jailbreak Loader
Open the palera1n jailbreak loader from the home screen, and tap on the
install button and the always allow button on the following pop-up.
Once you see a message finished installing, enjoy, tap on the respring
button.
After the respring, you’ll see Sileo and substrate icon on the home screen.
Also, check here how to take a complete backup of Cydia tweaks, and
restore them.
Step 9. Upgrade Sileo packages and install tweaks
Once you open sileo, you first need to upgrade all the packages, then go for
tweaks installations. Below is the link to palera1n jailbreak tweaks.
Compatible Tweaks List for Palera1n Jailbreak iOS

16
Check here the compatible palera1n jailbreak tweaks list with repos.
Conclusion
This is, guys, how to download palera1n GUI jailbreak iOS 16 macOS on
iPhone or iPad and install sileo using palera1n; this is currently the only iOS
16 jailbreak available for checkm8 devices; in simple words, the devices that
checkra1n jailbreak supports.
Other jailbreaks are in progress, which are Xina15, Cheyote, Blizzard, and
more; I have mentioned their update progress reports link; you can follow
those or bookmark those; these are regularly updated with what progress
the upcoming jailbreaks have made.

Palera1n GUI Jailbreak Setup PDF

Uploaded by

Copyright:

Available Formats

Palera1n GUI Jailbreak Setup PDF

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Palera1n GUI Jailbreak Setup PDF

Uploaded by

Copyright:

Available Formats

Download Palera1n GUI Jailbreak iOS 15 - 16 iPhone on Mac OS 2023-01-12, 10:32 AM

Download Palera1n GUI Jailbreak iOS

So this is the detailed, step-by-step pale ra1n jailbreak guide to download

I have shown the complete step-by-step palerain jailbreak process

What's Covered Below? [Show]

Palera1n GUI jailbreak macOS iOS 16 supported

Pale ra1n jailbreak supported iOS versions

Palera1n Jailbreak Semi-tethered Mode

Palera1n Jailbreak GUI Tethered Mode

Important Instructions: As it’s the checkm8 jailbreak before you follow

Let’s start downloading the palera1n jailbreak GUI guide on mac to

Follow the step-by-step sections below; if you already have these

Install HomeBrew for Palera1n Jailbreak iOS 15 –

/bin/bash -c "$(curl -fsSL

Step 3. If it shows you a homebrew installation error or permission error,

sudo chown -R $(whoami) /usr/local/Cellar

brew install libimobiledevice libirecovery python

sudo chown -R $(whoami) /usr/local/Cellar

Sudo pip3 install tk

Sudo pip3 install pillow

IMPORTANT: For iOS 16 Palera1n Jailbreak GUI

How to Download palera1n GUI jailbreak iOS 15 –

GUI for mac; you can get it here.

Step 2. Open Palera1n jailbreak GUI and run commands

the command and rerun it.

sudo xattr -rd com.apple.quarantine ./python

sudo chmod 755 ./palera1n

Step 3. Open System Preferences on Mac

Go to settings -> open system preferences -> security & privacy.

Step 4. Open Palera1n GUI Software

Step 5. Connect your device and pair it

Step 6. Put the Device in DFU mode

Step 7. Tethered or Semi-Tethered Pale ra1n GUI

Step 8. Install Sileo with Palera1n Jailbreak Loader

Step 9. Upgrade Sileo packages and install tweaks

Compatible Tweaks List for Palera1n Jailbreak iOS

You might also like