Z790 Pro RSD4
Z790 Pro RSD4
Z790 Pro RSD4
If you need to contact ASRock or want to know more about ASRock, you’re
welcome to visit ASRock’s website at http://www.asrock.com; or you may contact
your dealer for further information. For technical questions, please submit a
support request form at https://event.asrock.com/tsd.asp
ASRock Incorporation
e-mail: info@asrock.com.tw
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specifications 2
Chapter 2 Installation 11
2.1 Installing the CPU 12
2.10 Power On 25
2.14 M.2 WiFi/BT PCIe WiFi Module and Intel® CNVi (Integrated WiFi/
BT) Installation Guide 40
2.15 M.2 SSD Module Installation Guide (M2_1) 42
2.16 M.2 SSD Module Installation Guide (M2_2, M2_3 and M2_4) 46
Chapter 1 Introduction
Thank you for purchasing ASRock Z790 Pro RS/D4 motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any
modifications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specific information about the model
you are using. You may find the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.
English
1
1.2 Specifications
th th TM
CPU • Supports 13 Gen & 12 Gen Intel® Core Processors
(LGA1700)
• Supports Intel® Hybrid Technology
• Supports Intel® Turbo Boost Max 3.0 Technology
• Supports Intel® Thermal Velocity Boost (TVB)
• Supports Intel® Adaptive Boost Technology (ABT)
Expansion CPU:
Slot • 1 x PCIe 5.0 x16 Slot (PCIE2), supports x16 mode*
Chipset:
• 1 x PCIe 4.0 x16 Slot (PCIE3), supports x4 mode*
• 2 x PCIe 3.0 x1 Slots (PCIE1 and PCIE4)*
• 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT PCIe
WiFi module and Intel® CNVio/CNVio2 (Integrated WiFi/
English
BT)
2
Z790 Pro RS/D4
Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs
can be supported only with processors which are GPU
integrated.
e
• Intel® X Graphics Architecture (Gen 12)
• Supports eDP 1.4, supports max. resolution up to Full HD
60Hz
• 1 x HDMI 2.1 TMDS Compatible, supports HDCP 2.3 and
max. resolution up to 4K 60Hz
• 1 x DisplayPort 1.4 with DSC (compressed), supports HDCP
2.3 and max. resolution up to 8K 60Hz / 5K 120Hz
4
Z790 Pro RS/D4
Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
English
5
1.3 Motherboard Layout
6
Z790 Pro RS/D4
English
7
No. Description
1 ATX 12V Power Connector (ATX12V1)
2 ATX 12V Power Connector (ATX12V2)
3 CPU Fan Connector (CPU_FAN1)
4 CPU/Water Pump Fan Connector (CPU_FAN2/WP)
5 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
6 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
7 Chassis/Water Pump Fan Connector (CHA_FAN5/WP)
8 Chassis/Water Pump Fan Connector (CHA_FAN4/WP)
9 ATX Power Connector (ATXPWR1)
10 USB 3.2 Gen1 Header (USB32_6_7)
11 Front Panel Type C USB 3.2 Gen2x2 Header (USB32_TC1)
12 USB 3.2 Gen1 Header (USB32_4_5)
13 SATA3 Connectors (SATA3_4)(Upper), (SATA3_5)(Lower)
14 SATA3 Connectors (SATA3_2)(Upper), (SATA3_3)(Lower)
15 SATA3 Connectors (SATA3_0)(Upper), (SATA3_1)(Lower)
16 Post Status Checker (PSC)
17 SPI TPM Header (SPI_TPM_J1)
18 System Panel Header (PANEL1)
19 Power LED and Speaker Header (SPK_PLED1)
20 SATA3 Connector (SATA3_6)
21 SATA3 Connector (SATA3_7)
22 USB 2.0 Header (USB_7_8)
23 USB 2.0 Header (USB_5_6)
24 Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
25 Chassis/Water Pump Fan Connector (CHA_FAN3/WP)
26 Addressable LED Header (ADDR_LED2)
27 Addressable LED Header (ADDR_LED3)
28 Clear CMOS Jumper (CLRMOS1)
29 5-pin Thunderbolt AIC Connector (TB1)
30 Addressable LED Header (ADDR_LED1)
English
8
Z790 Pro RS/D4
12 11 10 9 8 7 6 5
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Port Function
Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out
9
English
10
128-bit Dual-Channel Memory x 4 Slots
DMI Gen4 x8
1.5 Block Diagram
eSPI
FAN*7 Headers
SIO NCT6796D
H/W Monitor KB/MS
Z790 Pro RS/D4
Chapter 2 Installation
This is an ATX form factor motherboard. Before you install the motherboard, study
the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a
grounded wrist strap or touch a safety grounded object before you handle the
components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
English
11
2.1 Installing the CPU
1. Before you insert the 1700-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any bent pins in the
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.
2 3
English
12
Z790 Pro RS/D4
4 5
6 7
English
Please save and replace the cover if the processor is removed. The cover must be
placed if you wish to return the motherboard for after service.
13
2.2 Installing the CPU Fan and Heatsink
1 2
N
FA
U_
CP
English
14
Z790 Pro RS/D4
This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.
4. The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
2 DIMMs
A1 A2 B1 B2
V V
4 DIMMs
A1 A2 B1 B2
V V V V
English
15
3
2
1
16
English
Z790 Pro RS/D4
:
6
(5
: ('
32 '
/
'
+
/(
6:
('
7
'
6(
/
(5
5(
:
(5
32
:
32
2
RESET SW
HDD LED
3$1(/
10 9
2 1
PANEL1
17
2.5 Installing the Motherboard
English
18
Z790 Pro RS/D4
Optical Drive
SATA Drive
19
3
20
Z790 Pro RS/D4
CLICK!
English
21
Expansion Slots (PCIe Slots)
There are 4 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
PCIe slots:
PCIE1 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
PCIE2 (PCIe 5.0 x16 slot) is used for PCIe x16 lane width graphics cards.
PCIE3 (PCIe 4.0 x16 slot) is used for PCIe x4 lane width graphics cards.
PCIE4 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
For a better thermal environment, please connect a chassis fan to the motherboard’s
chassis fan connector (CHA_FAN1~5/WP) when using multiple graphics cards.
English
22
Z790 Pro RS/D4
English
23
2.9 Connecting the Power Connectors
$7;9 $7;3:5
English
24
Z790 Pro RS/D4
2.10 Power On
1 3
English
25
2.11 Jumpers Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.
CLRMOS1
2-pin Jumper
26
Z790 Pro RS/D4
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.
PANEL1
PLED+
PLED-
PWRBTN#
GND
1
GND
RESET#
GND
HDLED-
HDLED+
Connect to the hard drive activity LED on the chassis front panel. The LED is on
when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists
of power button, reset button, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
27
Power LED and Speaker Header
(7-pin SPK_PLED1) (see p.6, No. 19)
Please connect the chassis power LED and the chassis speaker to this header.
SPK_PLED1
SPEAKER
DUMMY
DUMMY
+5V
PLED+
PLED+
PLED-
SATA3_3
SATA3_2
SATA3_1
SATA3_0
English
SATA3_7 SATA3_6
28
Z790 Pro RS/D4
USB_5_6
USB_PWR
-B
+B
GND
DUMMY
1
GND
+A
-A
USB_PWR
USB_7_8
USB_PWR
-B
+B
GND
DUMMY
1
GND
+A
-A
USB_PWR
USB32_4_5
1
Dummy IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
English
IntA_PB_D- GND
GND IntA_PA_SSTX+
IntA_PB_SSTX+ IntA_PA_SSTX-
IntA_PB_SSTX- GND
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX- Vbus
Vbus
29
Front Panel Type C USB 3.2 Gen2x2 Header
(20-pin USB32_TC1) (see p.6, No. 11)
There is one Front Panel Type C USB 3.2 Gen2x2 Header on this motherboard.
This header is used for connecting a USB 3.2 Gen2x2 module for additional USB 3.2
Gen2x2 ports.
USB32_TC1
HD_AUDIO1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
English
High Definition Audio supports Jack Sensing, but the panel wire on the chassis must
support HDA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.
30
Z790 Pro RS/D4
CHA_FAN5/WP
4 3 2 1
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
CHA_FAN4/WP
FAN_SPEED_CONTROL 4
CHA_FAN_SPEED 3
FAN_VOLTAGE 2
GND 1
CHA_FAN1/WP
1 GND
2 FAN_VOLTAGE
3 CHA_FAN_SPEED
4 FAN_SPEED_CONTROL
CHA_FAN2/WP
GND
FAN_VOLTAGE
CHA_FAN3/WP CHA_FAN_SPEED
GND FAN_SPEED_CONTROL
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL
1 2 3 4
1 2 3 4
English
31
CPU Fan Connector
(4-pin CPU_FAN1) (see p.6, No. 3)
This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to
connect a 3-Pin CPU fan, please connect it to Pin 1-3.
CPU_FAN1
4 3 2 1
GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL
CPU_FAN2/WP
4 3 2 1
GND
FAN_VOLTAGE
CPU_FAN_SPEED
FAN_SPEED_CONTROL
English
32
Z790 Pro RS/D4
ATXPWR1
12 24
1 13
4 1
ATX12V1
8 5
English
4 1
33
SPI TPM Header
(13-pin SPI_TPM_J1) (see p.6, No. 17)
This connector supports SPI Trusted Platform Module (TPM) system, which can
securely store keys, digital certificates, passwords, and data. A TPM system also
helps enhance network security, protects digital identities, and ensures platform
integrity.
SPI_TPM_J1
SPI_DQ3
SPI_PWR
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ
SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2
TB1
English
34
Z790 Pro RS/D4
RGB_LED1
1
+12V G R B
1 B
R
G
12V
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.
English
1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports standard 5050 RGB LED strip (12V/G/R/B), with a
maximum power rating of 3A (12V) and length within 2 meters.
35
Addressable LED Headers
(3-pin ADDR_LED1) (see p.6, No. 30)
(3-pin ADDR_LED2) (see p.6, No. 26)
(3-pin ADDR_LED3) (see p.6, No. 27)
These headers are used to connect Addressable LED extension cables which allow users
to choose from various LED lighting effects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.
ADDR_LED2
1
GND
DO_ADDR
VOUT
ADDR_LED3
1
GND
DO_ADDR
ADDR_LED1 VOUT
GND
DO_ADDR
VOUT
36
Z790 Pro RS/D4
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.
1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports WS2812B addressable RGB LED strip (5V/Data/
GND), with a maximum power rating of 3A (5V) and length within 2 meters.
English
37
eDP Signal Connector
(40-pin EDP1) (see p.7, No. 34)
This connector on the bottom side of the motherboard is for an LCD monitor that
supports an internal embedded DisplayPort (eDP).
*Please refer to page 48 for further instructions on how to adjust the brightness.
PIN SIGNAL
1 N/A
2 LCD_BLT_VCC
3 LCD_BLT_VCC
4 LCD_BLT_VCC
5 LCD_BLT_VCC
6 N/A
7 N/A
8 eDP_VARY_BL
9 eDP_BLON
10 BKT_GND
11 BKT_GND
12 BKT_GND
13 BKT_GND
14 eDP_HPD_CON
15 PNL_GND
16 PNL_GND
17 PNL_GND
18 PNL_GND
19 N/A
20 +LVDD
21 +LVDD
22 +LVDD
23 +LVDD
24 GND
25 eDP_AUX#_CON
26 eDP_AUX_CON
27 GND
28 eDP_TX0_CON
29 eDP_TX#0_CON
30 GND
31 eDP_TX1_CON
32 eDP_TX#1_CON
33 GND
34 N/A
35 N/A
36 GND
37 N/A
38 N/A
39 GND
40 N/A
English
38
Z790 Pro RS/D4
BOOT
CPU
DRAM
VGA
English
39
2.14 M.2 WiFi/BT PCIe WiFi Module and Intel® CNVi (Integrated
WiFi/BT) Installation Guide
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The M.2 Socket (Key E) supports type 2230 WiFi/BT PCIe WiFi module and
Intel® CNVi (Integrated WiFi/BT).
* The M.2 socket does not support SATA M.2 SSDs.
Before you install Intel® Integrated Connectivity (CNVi) module, be sure to turn off
the AC power.
Step 1
Step 2
A
English
40
Z790 Pro RS/D4
Step 3
A 20o
Step 4
English
41
2.15 M.2 SSD Module Installation Guide (M2_1)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The Hyper M.2 Socket (M2_1, Key M) supports type 2260/2280 PCIe Gen4x4 (64
Gb/s) mode.
Step 1
Step 2
No. 1 2
Nut Location A B
PCB Length 6cm 8cm
Module Type Type 2260 Type 2280
English
42
Z790 Pro RS/D4
1 Step 3
2
Before installing a M.2 SSD
module, please loosen the screws to
1
remove the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Step 5
B A
43
Step 6
Step 7
Correct Installation:
The SSD's PCB is in proper place, and
the M.2 heatsink can be screwed in.
English
Incorrect Installation:
The SSD's PCB sits between M.2 heatsink
and standoff. Do not continue.
44
Z790 Pro RS/D4
1 2 Step 8
For the latest updates of M.2 SSD module support list, please visit our website for details:
http://www.asrock.com
English
45
2.16 M.2 SSD Module Installation Guide (M2_2, M2_3 and
M2_4)
The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and
mSATA. The Hyper M.2 Sockets (M2_2~4, Key M) support type 2260/2280 PCIe Gen4x4
(64 Gb/s) mode.
Step 1
Step 2
No. 1 2
Nut Location A B
PCB Length 6cm 8cm
Module Type Type 2260 Type 2280
English
46
Z790 Pro RS/D4
Step 3
Step 4
Step 5
B A
Step 6
For the latest updates of M.2 SSD module support list, please visit our website for details:
http://www.asrock.com 47
2.17 Change Screen Brightness for eDP in Windows®
This section explains how to change screen brightness in Windows® when you use
an eDP panel.
The following is a setup example for Windows® 11. Setup procedures may vary from
different operating systems.
Setup Guide
Step 1
Step 2
In System > Display, select Brightness. Move the slider to fine-tune the brightness
level.
English
48
Z790 Pro RS/D4
Step 3
You might also see another check box displayed: Help improve battery by
optimizing the content shown and brightness. Select the check box to turn on the
content adaptive brightness control if needed.
English
49
Version 1.0
Published September 2022
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from
any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
INTEL END USER SOFTWARE LICENSE AGREEMENT
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software
only in its unmodified and binary form, (with the accompanying documentation, the
“Software”) for Licensee’s personal use only, and not commercial use, in connection with
Intel-based products for which the Software has been provided, subject to the following
conditions:
(a) Licensee may not disclose, distribute or transfer any part of the Software, and You
agree to prevent unauthorized copying of the Software.
(b) Licensee may not reverse engineer, decompile, or disassemble the Software.
(c) Licensee may not sublicense the Software.
(d) The Software may contain the software and other intellectual property of third party
suppliers, some of which may be identified in, and licensed in accordance with, an en-
closed license.txt file or other text or file.
(e) Intel has no obligation to provide any support, technical assistance or updates for the
Software.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its licensors or suppliers. The Software is copyrighted and protected
by the laws of the United States and other countries, and international treaty provisions.
Licensee may not remove any copyright notices from the Software. Except as otherwise
expressly provided above, Intel grants no express or implied right under Intel patents,
copyrights, trademarks, or other intellectual property rights. Transfer of the license ter-
minates Licensee’s right to use the Software.
DISCLAIMER OF WARRANTY. The Software is provided “AS IS” without warranty of
any kind, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PUR-
POSE.
LIMITATION OF LIABILITY. NEITHER INTEL NOR ITS LICENSORS OR SUPPLIERS
WILL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF
BUSINESS, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAG-
ES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN
IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LICENSE TO USE COMMENTS AND SUGGESTIONS. This Agreement does NOT
obligate Licensee to provide Intel with comments or suggestions regarding the Software.
However, if Licensee provides Intel with comments or suggestions for the modification,
correction, improvement or enhancement of (a) the Software or (b) Intel products or pro-
cesses that work with the Software, Licensee grants to Intel a non-exclusive, worldwide,
perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense,
under Licensee’s intellectual property rights, to incorporate or otherwise utilize those
comments and suggestions.
TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license
at any time if Licensee is in breach of any of its terms or conditions. Upon termination,
Licensee will immediately destroy or return to Intel all copies of the Software.
THIRD PARTY BENEFICIARY. Intel is an intended beneficiary of the End User License
Agreement and has the right to enforce all of its terms.
U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as
defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial
computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent
with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide
the Software to the U.S. Government. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95054.
EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will
export/re-export the Software, directly or indirectly, to any country for which the U.S.
Department of Commerce or any other agency or department of the U.S. Government
or the foreign government from where it is shipping requires an export license, or other
governmental approval, without first obtaining any such required license or approval. In
the event the Software is exported from the U.S.A. or re-exported from a foreign destina-
tion by Licensee, Licensee will ensure that the distribution and export/re-export or import
of the Software complies with all laws, regulations, orders, or other restrictions of the U.S.
Export Administration Regulations and the appropriate foreign government.
APPLICABLE LAWS. This Agreement and any dispute arising out of or relating to it will
be governed by the laws of the U.S.A. and Delaware, without regard to conflict of laws
principles. The Parties to this Agreement exclude the application of the United Nations
Convention on Contracts for the International Sale of Goods (1980). The state and federal
courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute aris-
ing out of or relating to this Agreement. The Parties consent to personal jurisdiction and
venue in those courts. A Party that obtains a judgment against the other Party in the
courts identified in this section may enforce that judgment in any court that has jurisdic-
tion over the Parties.
Licensee’s specific rights may vary from country to country.
WARNING
THIS PRODUCT CONTAINS A BUTTOON BATTERY
If swallowed, a button battery can cause serious injury or death.
Please keep batteries out of sight or reach of children.
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related UKCA Directives. Full text of UKCA
declaration of conformity is available at: http://www.asrock.com
ASRock INC. hereby declares that this device is in compliance with the essential require-
ments and other relevant provisions of related Directives. Full text of EU declaration of
conformity is available at: http://www.asrock.com
ASRock follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASRock product is in line with
global
environmental regulations. In addition, ASRock disclose the relevant information based
on regulation requirements.
Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for informa-
tion disclosure based on regulation requirements ASRock is complied with.
DO NOT throw the motherboard in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This symbol of the
crossed out wheeled bin indicates that the product (electrical and electronic
equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.