AKRON™

SERVICE SINK
ENAMELED CAST IRON

AKRON™ SERVICE SINK

• Enameled cast iron (inside only enameled)

• Supplied with wall hanger and rim guard
• Available with plain back or drilled back
for faucet

❏ 7695.008
Drilled back for faucet

❏ 7695.000
Plain back (no faucet hole drilling)

❏ 8379.026
Rim Guard

Nominal Dimensions: 24” x 20”

(610 x 508mm)

Bowl sizes:

19-7/8” (505mm) wide,

16-3/8” (416mm) front to back,
10-1/2” (267mm) deep C/L OF 9
SPOUT (229mm) FINISHED WALL
BRACE
3 REF.
8 (76mm)
1/2 COLD
Compliance Certifications - (203mm)

Meets or Exceeds the Following Specifications: 1/2 HOT

• ASME A112.19.1 for Cast Iron Plumbing Fixtures 1

(25mm) 2
(51mm)
• CAN / CSA B45 Series 6
9
(229mm)
14 (152mm)
HANGER (356mm)

11-1/4 24 20-1/2
(286mm) (610mm) (521mm)
42-1/4
(1073mm) 10-1/4
(260mm)

26-1/4
(667mm)
To Be Specified 15 REF.
(381mm)
❏ Faucet: 8340.235 exposed yoke wall-mount
utility faucet
❏ Faucet: 8340.243 same as above 5
FINISHED
with vacuum breaker FLOOR (127mm)

10-1/2
(267mm)
❏ Faucet: 8341.076 same as above 2 OR 3 N.P.T. NIPPLE
with vacuum breaker and stops in shanks AND FLANGE
NOT FURNISHED

❏ Alternative Faucet
❏ Trap Standard: 7798.030 cast iron “P” trap
standard to wall and strainer for 3” iron pipe
NOTES:
❏ Trap Standard: 7798.020 cast Iron “P” trap PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTING AND TRAP STANDARD NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
standard to wall and strainer for 2” iron pipe IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.1
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided leaflet.

CI-71
© 2003 American Standard Inc. Revised 5/03
 FLORWELL™
SERVICE SINK
ENAMELED CAST IRON

FLORWELL™ SERVICE SINK

• Enameled cast iron

• 3” outlet
• Corner model

❏ 7741.000
fixture only

❏ 7745.811
Vinyl Rim Guard

Nominal Dimensions: 28” x 28” x 13”

711 x 711 x 330mm

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
• CAN / CSA B45 Series
3/4
13 (19mm)
(330mm)

13
(330mm) FINISHED WALL

28
(711mm)

To Be Specified
❏ Faucet: 8344.112 faucet with top brace,
stops, and vacuum breaker
3/4 NOTE: SUPPLY FITTING CAN BE
(19mm) FINISHED WALL PLACE ON EITHER WALL
❏ Alternative faucet: C/L OF
28
(711mm) SPOUT BRACE
❏ Drain: 7721.038 flat grid drain 8
9
PLAN VIEW (229mm)
(203mm)
❏ Removable vinyl-coated rim guard:
7745.811 (black) 1/2 NPT
SUPPLIES

FINISHED WALL

48
(1219mm)
12-1/4 3/4
(311mm) (19mm)

5
(127mm)
13 ▼1 x 3
(330mm) (25 x 76mm)
8 SUPPORTING
(203mm) CLEAT ON
BOTH WALLS

ROUGH 1/4 (6mm)

2
FLOOR (51mm) 3 N.P.T. INSIDE THDS

NOTES:
▼ PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.1
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided leaflet.

CI-70
© 2003 American Standard Inc. 9/02