"Excellence in measurements"

MicroCal P200
Documenting Process
Pressure Calibrator

PRESSURE
CALIBRATORS

Internal + External
Pressure Modules

±0.025% FS Accuracy

Built-In Pressure/Vacuum
Pump (Hydraulic and
Pneumatic Available)

Large Graphic 6 Digit

Backlighted Display

IP65 Sealed

mV, V & mA (Active and

Passive Loop) Measuring and
Simulating for TRX
Calibration

Temperature with Pt100

for Flow Transmitters

Pressure Switch Test

Leak Test Procedure

Rechargeable Batteries

Real-time Clock With

Memory for In-Field
Calibration Procedures
("As Found" + "As Left")

RS232/USB Connection for the

Instrumentation Management
with the CalpMan 2007 Software
Bulletin 08-84.2 E - ed. 04-2007

n Instrum
tro e

Q
ro

nt
Eu

s
Ce

m
ste

fie
rti

dQ Sy
uality

www.eurotron.com
All descriptions are related to full options instrument. See latest page for the different configurations.
 MicroCal P200
PRESSURE
Documenting Process
CALIBRATORS
Pressure Calibrator

General

MicroCal P200 Pressure Calibrator is a versatile calibration instrument that Leak Test
combines advanced sensor technology with latest developments in This procedure allows you to measure
pressure instrumentation. It allows calibration and accurate testing the pressure fall in a programmable
procedures of the pressure process instrumentation as: pressure transducers time interval.
and transmitters, switches, relief valves, analogue pressure gauges.
Combined with Eurotron hand pressure pump, and related fittings, it
becomes a complete calibration system to be used on field.
Between several functions, MicroCal P200 allows you to use the calibrator
as a TRX using the scalable output option. Simultaneous display of pressure
versus current, voltage, percentage, or switch status.

4-wire Pt100 thermometer Transmitter Calibration

Resistance and temperature with The ChIn&ChP display configures Switch test
resistance thermometer may be MicroCal P200 to simultaneously The advanced pressure switch testing
measured on a 2, 3 and 4 wire display the output pressure and input facility allow the operator to display
connections for best accuracy and current. From the menu, the user can the applied pressure and the switch
resolution (0.01°C). select the desire pressure unit too suit status OPEN or CLOSED. When the
the transmitter. The passive loop routine is performed through a
F2184200 - Pt100 Class A working standard
connection offer the 24 Vdc loop documenting procedure, the
power supply to the transmitter. No MicroCal P200 display the hysteresis
external power is required. The input of the contact and the data can be
signal can be scaled to pressure or % recalled for an online analysis or
of FS allowing the user to make a stored for a detailed report. The leak
Pressure modules (INT &EXT) direct comparison between the test function checks for leak before
The internal pressure module can be actual pressure and calibration or testing routine. The leak
configured to provide a lot of the output of the transmitter. The time is selectable and the P200
combinations for gauge, absolute pneumatic or hydraulic generation display will show the drop in pressure
and differential pressure system allows users to easily apply over the selected time. Due to its
measurements. pressure to transmitters. The volume concept of “Built up Pump” the
External interchangeable pressure adjuster take the pressure to the MicroCal P200 pressure head can be
module can be connected to extend desired set point. When the disconnected from the pump and
the pressure range up to 700 bar. The calibration routine is performed used “in Line” to search for pressure
calibrator includes 23 selectable through a documenting procedure, leak. Additionally, pressure can be
pressure units. the set point and errors are monitored through graph function.
automatically displayed along with
the pass and fail report. You just need
to press enter to store the results.

Report of Calibration
Each MicroCal is factory calibrated
and certified against Eurotron
Standards, that are periodically
certified by an Internationally
recognised Laboratory to ensure
traceability, and shipped with a
Report of Calibration stating the Data logging
nominal and actual values and the The calibrator can be used as a two
deviation errors. channel datalogger. The graphic
stating the nominal and actual values mode allows you to display the trend.
and the deviation errors. The LogMan PC software permits
storage of data on the hard-disk.
46
 MicroCal P200
PRESSURE
Documenting Process
CALIBRATORS
"Excellence in measurements"
Pressure Calibrator

Documenting
Capability Specifications

MicroCal P200 is a powerful Pressure

documenting pressure calibrator with Pressure media: AISI 316 SS compatible fluids (water, gas, and oil)
a field error calculation with include Temperature compensation: Automatic with built-in calibration matrix.
the Pass/Fail result calculation. The Engineering units: mbar, bar, Pa, hPa, kPa, MPa, kg/cm2, kg/m2, psi, mmH2O, cmH2O,
calibration procedure are mH2O, Torr, atm, lb/ft2, inH2O, ftH2O, mmHg, cmHg, mHg, inHg, programmable.
downloaded from a PC to the internal Accuracy: the accuracies are stated for 365 days and includes non linearity,
memory of the unit. By simplify hysteresis, and repeatability. The average temperature coefficient, inside the temperature
pressing the CAL button on the compensated range, is ±0.002% of rdg/°C (w.t.r. +23°C/+73°F).
keyboard, each single procedure Compensation temperature range: +0 to +45°C (+32°F +113°F)
can be recall. By selecting the
appropriate TAG number the
Internal sensors External modules
calibrator will take you through the
Accuracy: ±0.025% F.S. Accuracy: ±0.025% F.S.
procedure reducing possible error
Overpressure: 125% F.S. Overpressure: 125% F.S.
due to operator negligence and
Port: (male) 3/8" BSP Port: (male) ¼" BSP
improving the efficiency of the
Connection wire lenght: 2 meters
calibration routine.
General
The calibration data are then stored Display: graphic LCD display with automatic and manual backlight device
and downloaded to the PC for a post Measurement sampling time: 250 ms
analysis and generate calibration Digital interface: full bidirectional RS232
report. CalPMan 2007 include a Power supply: external charger and rechargeable Ni-MH battery pack
powerful instruments data base Battery life (typical):
enable the user to create calibration 10 h on measure (backlight Off)
procedure, maintain instruments and 4 h with 20 mA simulation (backlight Off)
print calibration report all in Recharging time (typical): 5 h at 90% and 6 h at 99% with instrument switched off.
accordance with the ISO 9001 quality Battery charge indication: bar graph on the LCD display (flashing on charge)
standard. The whole documenting Line transformer insulation: 2500 Vac
process takes a fraction of the time, it Operating environment temperature range: from -10 °C to +55 °C
usually takes with a manual Storage temperature range: from -30 °C to +60 °C
procedure. Humidity: max 95%RH non condensing
Case: Injection moulded polycarbonate case
Sealing: IP65
Weights: nett 1.4 Kg gross 2.5 Kg
Dimensions: 130x120x70 mm

Measure/ Range Resolution Accuracy

Generate
mV -20 to 200mV 1mV ±(0.02% rdg. + 3 mV)
V -0.2 to 2V 10mV ±(0.02% rdg. + 10 mV)
-2 to 20V 100mV ±(0.02% rdg. + 100 mV)
mA -5 to 22mA 0.1mA ±(0.02% rdg. + 0.4mA)

Measure Only:
Pt100 IEC -200 to 850°C 0.01°C ±(0.02% rdg. + 0.05°C)
OIML, a=.3926 -330 to 1570°F 0.01 °F ±(0.02% rdg. + 0.09°F)

47
 MicroCal P200
PRESSURE
Documenting Process
CALIBRATORS
Pressure Calibrator

Ordering Code Accessories

3224 basic - A - B - C - D - E EXTERNAL PRESSURE MODULES - AISI 316SS - ±0.025% F.S.

GAUGE
MicroCal P200 Basic: internal sensor + external sensor connector
BB480009 from -100 to 100 mbar (1.5 PSI) res. 0.001mbar
BB480010 from -500 to 500 mbar (7 PSI) res. 0.01mbar
3224 plus - A - B - C - D - E BB480011 from -0.95 to 1 bar (15 PSI) res. 0.01mbar
MicroCal P200 plus: internal sensor + external sensors connector BB480012 from -0.95 to 2 bar (30 PSI) res. 0.01mbar
+ mA/V in/out + Pt100 input BB480013 from -0.95 to 7bar (100 PSI) res. 0.1mbar
BB480014 from -0.95 to 20 bar (300 PSI) res. 0.1mbar
Standard package includes: Unit, Charger, Instruction Manual, BB480015 from 0 to 35 bar (500 PSI) res. 1mbar
Report of calibration. BB480016 from 0 to 70 bar (1000 PSI) res. 1mbar
BB480017 from 0 to 150 bar (2000 PSI) res. 1mbar
Table A Pressure Accuracy BB480018 from 0 to 350 bar (5000 PSI) res. 10mbar
1 ±0.05% F.S. BB480019 from 0 to 700 bar (10000 PSI) res. 10mbar
2 ±0.025% F.S.
ABSOLUTE
Table B Internal sensor range BB480020 from 0 to 2 bar (30 PSI) res. 0.01mbar
2 -100 to 100 mbar Gauge sensor res. 0.001mbar BB480021 from 0 to 20 bar (300 PSI) res. 0.1mbar
3 -500 to 500 mbar Gauge sensor res. 0.01mbar
4 -0.95 to 1 bar Gauge sensor res. 0.01mbar SOFTWARE
5 -0.95 to 2 bar Gauge sensor res. 0.01mbar BB530203 RS232 adapter cable
5A 0 to 2 bar Absolute sensor res. 0.01mbar BB530213 USB adapter cable
6 -0.95 to 7 bar Gauge sensor res. 0.1mbar BB260198 LogMan - Data Logging WindowsTM Software
7 -0.95 to 20 bar Gauge sensor res. 0.1mbar BB260167 CalpMan 2007 - Calibration Procedure Manager
7A 0 to 20 bar Absolute sensor res. 0.1mbar WindowsTM Software
8 0 to 35 bar Gauge sensor res. 1mbar
9 0 to 70 bar Gauge sensor res. 1mbar MISCELLANEOUS
A 0 to 150 bar Gauge sensor res. 1mbar EE300203 Electrical signal test lead kit
B 0 to 350 bar Gauge sensor res. 10mbar EE480053 1/4" BSPM to NPT adapter kit (1/8"; 1/4"; 3/8"; 1/2")
C 0 to 700 bar Gauge sensor res. 10mbar EE480054 1/4" BSPM adapter kit (1/2" M; 1/2" F, 3/8" F, 1/8" F)
EE880052 ABS transit carrying case (for Calibrator and Accessories)
Table C Line charger F2184200 Pt100 Working Standard Class A
1 120V 50/60 Hz with USA plug
2 230V 50/60 Hz with Schuko plug
3 230V 50/60 Hz with UK plug
4 230V 50/60 Hz with European plug Pneumatic Kit
5 100V 50/60 Hz with USA/Japan plug

Table D Accessories Includes:

0 None
1X -0.95 to 40 bar pneumatic hand-held pump 40 bar pneumatic
(F3280019) hand pump
2X 700 bar hydraulic hand-held pump (F3280015)
2T 700 bar hydraulic hand-held pump (F3280015) + A set of BSP adaptors:
high pressure hose 1/8", 1/4", 3/8" and 1/2" BSP
8 ABS carrying case female

Table E Report of Calibration ABS transit carrying case

1 Eurotron certificate
Specifications may change without notice.

F3280019 Pneumatic hand pump Hydraulic Kit

for vacuum and pressure up to 40 bar

Includes:

700 bar hydraulic

hand pump

A set of BSP adaptors:

F3280015 Hydraulic hand pump 1/8", 1/4", 3/8" and 1/2" BSP
for pressure up to 700 bar female

EE372008 High pressure hydraulic hose ABS transit carrying case

48