SOUND

Particle motion of mechanical waves
(i) Transverse Waves

Particle motion is perpendicular to the direction of wave motion. This type of wave is a mechanical wave.
E.g: Light and Mexican wave in a stadium.
(ii) Longitudinal waves
Particles travel parallel to the direction of wave motion, by means of successive compressions or elongations. This is
also a mechanical wave.
E. g: Sound waves in air.
Sound Properties
Introduction to sound waves
Sound needs a medium to propagate. The matter or material through which sound propagates is called a medium.
When particles vibrate about their mean positions, it pushes a region of compressed air, creating a region of high
pressure, followed by a region of low pressure as the particle retreats to its mean position. The sound wave
propagates by compressions and rarefactions of particles in a medium. Sound propagation can be visualised as the
propagation of pressure variations in the medium.
Characteristics of Sound Waves

Wavelength
The distance between two successive crests or troughs (or) successive compressions and rarefactions is called as
wavelength (λ). The SI unit of wavelength is metre (m).
Time period
Time taken by two consecutive compressions or rarefactions to cross a fixed point is called a Time period (T). The SI
unit of time in seconds (s).
Frequency
The number of compressions or rarefactions per unit time is called frequency (
The SI unit of frequency is Hertz. The SI unit is Hertz (s−1)
�=1�
Speed (v), wavelength (λ) and frequency (
Amplitude
The magnitude of disturbance in a medium on either side of the mean value is called an amplitude (A).
As shown in the figure below, the unit of amplitude will be the density or pressure. Distance between mean position
and crest (maximum displacement).

Amplitude (A)
Pitch
The number of compressions or rarefactions per unit time. Directly proportional to frequency.
Representation of low and high
pitch
Volume
Volume or loudness of a sound depends on the amplitude. The force with which an object is made to vibrate gives
the loudness.
Higher force → higher amplitude → louder sound

The amount of sound energy flowing per unit time through a unit area is called the intensity of sound.
The
Intensity of Sound
Note and Tone

A sound of a single frequency is called a tone. A sound produced with a mixture of several frequencies is
called a note.
Quality of sound
The richness or timber of sound is called the quality. Sound with the same pitch and loudness can be distinguished
based on the quality. Music is pleasant to the ears while noise is not. But they both can have the same loudness and
pitch.
Speed of sound
Sound travels through different media with different speeds. Speed of sound depends on the properties of the
medium: pressure, density and temperature
Speed of sound: Solids > Liquids > Gases
Speed of sound in air = 331 m/s at 00C and 344 m/s at 22∘ C
When a source emits sound with a speed greater than the speed of sound in air, it creates a sonic boom which
produces shockwaves with lots of energy. They produce a very loud noise which is enough to shatter glass and
damage buildings.
Reflection of Sound Waves

Like light, sound also follows laws of reflection, it bounces off the surface of solid and liquid.
Echo
The phenomenon where a sound produced is heard again due to reflection is called an echo.
E.g: Clapping or shouting near a tall building or a mountain.
To hear distinct echo sound, the time interval between original and reflected sound must be at least 0.1s. As sound
persists in our brain for about 0.1s. Minimum distance for obstruction or reflective surface to hear an echo should be
17.2 m. Multiple echoes can be heard due to multiple reflections.
Sonar and Radar

SONAR – Sound Navigation And Ranging.
It is a technique that uses sound or ultrasonic waves to measure distance. The human range of hearing is 20Hz-
20kHz.
What are Ultrasonic sounds?
Ultrasonic sounds are high-frequency sound having a frequency greater than 20kHz (inaudible range).
Applications of Ultrasound
(i) Scanning images of human organs
(ii) Detecting cracks in metal blocks
(iii) Cleaning parts that are hard to reach
(iv) Navigating, communicating or detecting objects on or under the surface of the water (SONAR).
Sonar consists of a transmitter and detector mounted on a boat or ship. The transmitter sends ultrasonic sound
waves to the seabed which gets reflected back and picked up by the detector. Knowing the speed of sound in water,
distance can be measured using: 2d=v×t. This method is called echo-location or echo ranging.
To know more about Uses of Radar, visit here.
Reverberation
Persistence of sound because of multiple reflections is called reverberation. Examples: Auditorium and a big hall.
Excessive reverberation is undesirable and to reduce this, halls and auditoriums have sound-absorbing materials on
the walls and roofs. E.g: Fibreboard and rough plaster.
To know more about Reverberation, visit here.
Doppler’s effect
If either the source of sound or observer is moving, then there will be a change in frequency and wavelength for the
observer. The frequency will be higher when the observer moves towards the source and it decreases when the
observer moves away from the source.
Example: If one is standing on a street corner and an ambulance approaches with its siren blaring, the sound of the
siren steadily gains in pitch as it comes closer and then, as it passes, the pitch suddenly lowers.
To know more about Doppler’s Effect, visit here.
Human Ear
The ear is a sensitive organ of the human body. It is mainly involved with detecting, transmitting and transducing
sound and maintaining a sense of balance is another important function of the human ear. Human ear includes:
 The outer ear or the visible part of the ear is called the pinna.
 Pinna collects sound from the surroundings.
 Sound passes through a tube called an auditory canal.
 Eardrum (tympanic membrane) vibrates in response to incident sound waves.
 Vibrations are amplified and transmitted further by three bones hammer, anvil and stirrup in the middle ear
to the inner ear.
 In the inner ear, cochlea converts pressure signals into electrical signals.
 Electrical signals are transmitted by the auditory nerve to the brain for interpretation.
Human Ear

SOUND

Uploaded by

Copyright:

Available Formats

SOUND

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SOUND

Uploaded by

Copyright:

Available Formats

Particle motion of mechanical waves

(i) Transverse Waves

Characteristics of Sound Waves

Higher force → higher amplitude → louder sound

Note and Tone

Reflection of Sound Waves

Sonar and Radar

You might also like