JaSolar Certificate CE Certificate EN
JaSolar Certificate CE Certificate EN
JaSolar Certificate CE Certificate EN
Certification Mark:
The product was tested on a voluntary basis and complies with the essential requirements. The
certification mark shown above can be affixed on the product. It is not permitted to alter the
certification mark in any way. In addition, the certification holder must not transfer the certificate to
third parties. This certificate is valid until the listed date, unless it is cancelled earlier. All applicable
requirements of the testing and certification regulations of TÜV SÜD Group have to be complied. For
details see: www.tuvsud.com/ps-cert
Date, 2022-11-23
( Zhulin Zhang )
Page 1 of 6
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
CERTIFICATE
No. Z2 072092 0295 Rev. 51
Page 6 of 6
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
Attestation of Conformity
No. N8A 072092 0296 Rev. 25
This Attestation of Conformity is issued on a voluntary basis according to the Low Voltage Directive
2014/35/EU relating to electrical equipment designed for use within certain voltage limits. It confirms
that the listed equipment complies with the principal protection requirements of the directive and is
based on the technical specifications applicable at the time of issuance. It refers only to the particular
sample submitted for testing and certification. For details see: www.tuvsud.com/ps-cert
Date, 2021-05-17
( David Bo )
Page 1 of 5
After preparation of the necessary technical documentation as well as the EU declaration of conformity the
required CE marking can be affixed on the product. The declaration of conformity is issued under the sole
responsibility of the manufacturer. Other relevant EU-directives have to be observed.
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
Attestation of Conformity
No. N8A 072092 0296 Rev. 25
Page 2 of 5
After preparation of the necessary technical documentation as well as the EU declaration of conformity the
required CE marking can be affixed on the product. The declaration of conformity is issued under the sole
responsibility of the manufacturer. Other relevant EU-directives have to be observed.
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
Attestation of Conformity
No. N8A 072092 0296 Rev. 25
Page 3 of 5
After preparation of the necessary technical documentation as well as the EU declaration of conformity the
required CE marking can be affixed on the product. The declaration of conformity is issued under the sole
responsibility of the manufacturer. Other relevant EU-directives have to be observed.
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
Attestation of Conformity
No. N8A 072092 0296 Rev. 25
Page 4 of 5
After preparation of the necessary technical documentation as well as the EU declaration of conformity the
required CE marking can be affixed on the product. The declaration of conformity is issued under the sole
responsibility of the manufacturer. Other relevant EU-directives have to be observed.
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
Attestation of Conformity
No. N8A 072092 0296 Rev. 25
Page 5 of 5
After preparation of the necessary technical documentation as well as the EU declaration of conformity the
required CE marking can be affixed on the product. The declaration of conformity is issued under the sole
responsibility of the manufacturer. Other relevant EU-directives have to be observed.
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
CERTIFICATE
No. Z2 072092 0300 Rev. 15
Certification Mark:
The product was tested on a voluntary basis and complies with the essential requirements. The
certification mark shown above can be affixed on the product. It is not permitted to alter the
certification mark in any way. In addition, the certification holder must not transfer the certificate to
third parties. This certificate is valid until the listed date, unless it is cancelled earlier. All applicable
requirements of the testing and certification regulations of TÜV SÜD Group have to be complied. For
details see: www.tuvsud.com/ps-cert
Date, 2022-01-26
( Zhulin Zhang )
Page 1 of 5
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany
CERTIFICATE
No. Z2 072092 0300 Rev. 15
Parameters:
Construction: Framed or Frameless,
with Junction box,
cable and Connectors.
Fire Safety Class: Class C or Class A according to UL790.
Safety Class: Class II
Maximum System Voltage: 1000 V DC or 1500V DC
PID Test Condition: ±1000 V DC, 96h, 60°C,
85% RH or 96h, 85°C, 85% RH
±1500 V DC, 96h, 85°C, 85% RH
PID testing method according to IEC TS 62804-1:2015
Page 5 of 5
TÜV SÜD Product Service GmbH • Certification Body • Ridlerstraße 65 • 80339 Munich • Germany