Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    Sikabond - 105 Contactfix

    Uploaded by

    billGREG

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sikabond - 105 Contactfix

    Uploaded by

    billGREG
    46 views2 pages

    Original Title

    sikabond_-105_contactfix

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views2 pages

    Sikabond - 105 Contactfix

    Uploaded by

    billGREG

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PRODUCT DATA SHEET

    SikaBond®-105 ContactFix
    FAST CONTACT ADHESIVE

    DESCRIPTION CHARACTERISTICS / ADVANTAGES


    SikaBond®-105 ContactFix is a premium sprayable con- ▪ One-component adhesive
    tact adhesive that has been formulated to meet varied ▪ Very short flash-off time
    needs for laminate fabrication. This adhesive gives fast ▪ High initial strength
    drying time, and a strong heat resistant and water res- ▪ Easy to apply
    istant bond. ▪ Resistant against aging
    ▪ High heat resistance
    USES ▪ Broad adhesion range
    ▪ Fast dry time (Approximately 3-5 minutes)
    SikaBond®-105 ContactFix has a very broad adhesion
    range and gives a strong and lasting bond. Suitable
    substrates are timber, rubber sheets, plastic lamin-
    ates, fabric, cloth backed and polyester backed vinyl,
    MDF, particleboard, concrete, glass and metal sheets.
    In the production of transport vehicles SikaBond®-105
    ContactFix is suitable for the room temperature con-
    tact bonding of different covering materials e.g. PUR
    foams, textiles and for adjoining steps, wheel arches,
    seat brackets and side walls, especially for covering
    materials with high spring-back forces, like cover trims
    and edging profiles. SikaBond®-105 ContactFix is also
    suitable for auto upholstery and furniture upholstery.
    Test with actual substrates and conditions have to be
    performed to ensure adhesion and material compatib-
    ility.

    PRODUCT INFORMATION
    Composition One-component polychloroprene
    Packaging 500ml, 1L, 4L Can
    20L Pail
    Shelf life 12 months if stored according to the storage conditions.
    Storage conditions Must be stored in original, undamaged packaging, in dry conditions and
    out of direct sunlight, at temperatures between +10°C and +25°C.
    Colour Yellow
    Density 0.81 kg/l approximately

    Product Data Sheet


    SikaBond®-105 ContactFix
    April 2023, Version 02.02
    020513030000000095

    1/2
    Solid content by mass 17% approximately
    Consistency 350 mPa.s approximately
    Consumption 6 - 8m2 / Litre

    BASIS OF PRODUCT DATA For application on open weave or porous


    materials spray apply the adhesive to avoid the adhes-
    All technical data stated in this Product Data Sheet are ive bleeding through the substrate.
    based on laboratory tests. Actual measured data may Once the container is opened, the material must be
    vary due to circumstances beyond our control. used up in a short time.

    IMPORTANT CONSIDERATIONS CLEANING OF EQUIPMENT


    ▪ Do not use in temperatures below +10°c condensed Uncured SikaBond®-105 ContactFix may be removed
    water may form on the adhesive and prevent bond- from tools and equipment with Sika® Remover-208 or
    ing. another suitable solvent. Once cured, the material can
    ▪ For best results apply at +20°c (atmosphere, material only be removed mechanically. Hands and exposed
    and adhesive) skin should be washed immediately using Sika® Hand-
    ▪ Do not apply excessive adhesive, allow adhesive to clean towel or a suitable industrial hand cleaner and
    pool or apply the two substraes together too early. water. Do not use solvents.
    This will cause entrapped solvents which will cause a
    weak bond or bond failure. LOCAL RESTRICTIONS
    ▪ Coverage rate, evaporation time, open time and
    press time are dependant on the type of materials to Please note that as a result of specific local regulations
    be bond and conditions such as temperature and hu- the declared data for this product may vary from
    midity. country to country. Please consult the local Product
    Data Sheet for the exact product data.
    ECOLOGY, HEALTH AND SAFETY
    For information and advice on the safe handling, stor- LEGAL NOTES
    age and disposal of chemical products, users shall
    The information, and, in particular, the recommenda-
    refer to the most recent Safety Data Sheet (SDS) con-
    tions relating to the application and end-use of Sika
    taining physical, ecological, toxicological and other
    products, are given in good faith based on Sika's cur-
    safety-related data.
    rent knowledge and experience of the products when
    properly stored, handled and applied under normal
    APPLICATION INSTRUCTIONS conditions in accordance with Sika's recommenda-
    tions. In practice, the differences in materials, sub-
    SUBSTRATE PREPARATION
    strates and actual site conditions are such that no war-
    The adhesion surfaces must be clean, dry and free of ranty in respect of merchantability or of fitness for a
    oils, fats, loose and friable materials. particular purpose, nor any liability arising out of any
    legal relationship whatsoever, can be inferred either
    APPLICATION METHOD / TOOLS from this information, or from any written recom-
    mendations, or from any other advice offered. The
    The adhesive generally is applied with suitable roll- user of the product must test the product’s suitability
    coater, tooth-comb, brush or spray gun. Apply to both for the intended application and purpose. Sika re-
    surfaces evenly. Wait until touch dry (normally 3- serves the right to change the properties of its
    5min) depending on drying conditions, then bring the products. The proprietary rights of third parties must
    materials together with strong even pressure. Care be observed. All orders are accepted subject to our
    must be taken to avoid the formation of adhesive current terms of sale and delivery. Users must always
    pools on the bonding surfaces. Entrapped solvent refer to the most recent issue of the local Product
    causes weak bond. Data Sheet for the product concerned, copies of which
    will be supplied on request.

    Sika Australia Pty Limited


    ABN 12 001 342 329
    aus.sika.com
    Tel: 1300 22 33 48

    SikaBond-105ContactFix-en-AU-(04-2023)-2-2.pdf

    Product Data Sheet


    SikaBond®-105 ContactFix
    April 2023, Version 02.02
    020513030000000095

    2/2

    You might also like