Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 2 views

    DB1136752EN

    Uploaded by

    Ing. Mario A. Samudio Ibarra
    This document provides information on the ÖLFLEX CLASSIC 115 CY cable. It is a control cable suitable for occasional flexible use and fixed installation under medium mechanical load conditions. It can be used in dry, damp, or wet areas and outdoors if UV protection is used. The cable is designed based on relevant EN and VDE standards. It has a bare copper conductor, PVC insulation, identification coding on the cores, and a tinned copper braided screen. It has an operating temperature range of -5°C to +70°C during occasional flexing and -40°C to +80°C during fixed installation. It is suitable for torsional applications in wind turbines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DB1136752EN

    Uploaded by

    Ing. Mario A. Samudio Ibarra
    2 views1 page
    This document provides information on the ÖLFLEX CLASSIC 115 CY cable. It is a control cable suitable for occasional flexible use and fixed installation under medium mechanical load conditions. It can be used in dry, damp, or wet areas and outdoors if UV protection is used. The cable is designed based on relevant EN and VDE standards. It has a bare copper conductor, PVC insulation, identification coding on the cores, and a tinned copper braided screen. It has an operating temperature range of -5°C to +70°C during occasional flexing and -40°C to +80°C during fixed installation. It is suitable for torsional applications in wind turbines.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the ÖLFLEX CLASSIC 115 CY cable. It is a control cable suitable for occasional flexible use and fixed installation under medium mechanical load conditions. It can be used in dry, damp, or wet areas and outdoors if UV protection is used. The cable is designed based on relevant EN and VDE standards. It has a bare copper conductor, PVC insulation, identification coding on the cores, and a tinned copper braided screen. It has an operating temperature range of -5°C to +70°C during occasional flexing and -40°C to +80°C during fixed installation. It is suitable for torsional applications in wind turbines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2 views1 page

    DB1136752EN

    Uploaded by

    Ing. Mario A. Samudio Ibarra
    This document provides information on the ÖLFLEX CLASSIC 115 CY cable. It is a control cable suitable for occasional flexible use and fixed installation under medium mechanical load conditions. It can be used in dry, damp, or wet areas and outdoors if UV protection is used. The cable is designed based on relevant EN and VDE standards. It has a bare copper conductor, PVC insulation, identification coding on the cores, and a tinned copper braided screen. It has an operating temperature range of -5°C to +70°C during occasional flexing and -40°C to +80°C during fixed installation. It is suitable for torsional applications in wind turbines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    1136752 DATA SHEET

    valid from:
    01.01.2019 CLASSIC 115 CY

    Application
    ÖLFLEX CLASSIC 115 CY cables are control cables for occasional flexible use and fixed installation under medium mechanical load
    conditions. They are also suitable for use in dry, damp or wet areas. If using outdoors, observe the indicated temperature range and use with
    UV protection. They are largely resistant to acids, alkalis and certain oils at room temperature.
    ÖLFLEX CLASSIC 115 CY cables are suitable for occasional, non-automated movements. They meet the requirements for slow rotational
    movements, such as in the loop of a wind turbine. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and
    operation. Compulsory guidance is not permitted.
    The screening braid protects against interference from electrical fields.
    Application range:
    Control units for machine tools, conveyor systems, measurement and control technology, office machines and systems for data processing.
    This cable is suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they typically occur in the
    loop of a wind turbine.

    Design
    Design based on
    EN 50525-2-51 resp. VDE 0285-525-2-51
    Conductor bare copper, fine wire strand in acc. to IEC 60228 resp. VDE 0295, class 5
    Insulation PVC compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3
    with increased requirements acc. to Lapp specification
    Core identification code acc. to VDE 0293-1, with or without GN/YE ground conductor
    black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334
    Stranding cores are stranded in layers
    Taping plastic foil
    Screen braid of tinned copper, coverage = 85% (nominal value)
    Outer sheath PVC compound TM2 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1,
    with increased requirements acc. to Lapp specifications
    Colour: Siver grey, similar RAL 7001
    dl safjl öj f

    Electrical properties at 20°C


    Specific volume resistivity > 20 G Ω x cm
    Transfer impedance max. 250 mΩ/m (at 30 MHz)
    Rated voltage U₀ / U: 300 / 500 V
    Test voltage core / core: 4000 V AC
    core / screen: 2000 V AC

    Mechanical and thermal properties


    Minimum bending radius occasional flexing: 20 x cable diameter
    fixed installation: 6 x cable diameter
    Temperature range occasional flexing: - 5˚C up to +70˚C max. conductor temp.
    fixed installation: - 40˚C up to +80˚C max. conductor temp.
    Torsional stress in WTG:
    TW-0 (5.000 cycles at ≥ + 5°C)
    TW-1 (2.000 cycles at ≥ -20°C)
    ± 150°/m at 1 revolution per minute
    Flammability acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
    Tests acc. to IEC 60811, EN 50395, EN 50396
    General requirements This cable is conform to the EU-Directives 2014/35/EU (Low Voltage Directive)

    Creator: HESC / PDC Document: DB1136752EN


    Page 1 of 1
    Released: ALTE / PDC Version: 07
    We reserve all rights according to DIN ISO 16016.
    PD 0019/05_04.18EN

    You might also like