11 IV April 2023

https://doi.org/10.22214/ijraset.2023.50696
 International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 11 Issue IV Apr 2023- Available at www.ijraset.com

An Analysis of Regenerative Solar Powered

Elevator
Patel Naval Rakeshkumar1, Thakar Kavan Aniketbhai2, Gajjar Harshit Pradipkumar3
Department of Mechanical Engineering, Indus Institute of Technology and Engineering, Ahmedabad, India

Abstract: The development of regenerative solar-powered elevators has the potential to significantly reduce the energy
consumption and environmental impact of vertical transportation systems. These elevators are designed to capture and reuse
energy that would otherwise be lost during operation, making them highly energy-efficient and cost-effective.
This paper discusses the objectives that should be considered when designing regenerative solar-powered elevators. These
objectives include energy efficiency, renewable energy, reliability and safety, cost-effectiveness, accessibility, and innovation. By
focusing on these objectives, regenerative solar-powered elevators can provide a safe, reliable, and sustainable solution for
vertical transportation.
The paper also discusses the various components of a regenerative solar-powered elevator system, including the solar panels,
battery storage system, regenerative braking system, and control system. These components work together to capture, store, and
reuse energy during elevator operation, reducing the overall energy consumption of the system.
Overall, the development of regenerative solar-powered elevators represents a significant step forward in sustainable
transportation technology. By incorporating innovative design features and utilizing renewable energy sources, these elevators
can provide a more environmentally friendly and cost-effective alternative to traditional vertical transportation systems.

I. INTRODUCTION
In last years, energy savings has become a particularly significant issue; in fact, energy efficiency policy in many countries
has been established in order to mitigate the environmental effects of the conventional energy sources. Moreover, the
reduction of electrical energy consumption is considered a key aspect to make the national energy systems robust enough to
ensure the energy services needed for local and global economies. Among the several international and national action plans
undertaken for energy saving, a considerable prominence has been given to the sustainability certifications of buildings and
green building ratings. In the context of a sustainable development, the lift consumptions plays a key role as it strongly affects
the energy use associated to the buildings.
New elevator configurations are proposed nowadays from specialized industry in this sector, mainly based on the use of
regenerative PMSM electrical drives, coupled to energy storage systems for regeneration and power peak shaving; such
solutions show good service and energy saving capability, but the investment cost for systems modernization can be significant.
Here we are talking about regenerative drive system, A regenerative drive is a type of electrical drive system that is able to
recover some of the energy that would otherwise be lost during operation, and convert it back into usable electrical power.
This is achieved through the use of a special type of power converter that is able to convert the kinetic energy of the system
back into electrical energy, which can then be used to power other devices or be fed back into the electrical grid.

II. LITERATURE REVIEW

A. Hirzel, S., and Dutschke, E. (2010).
From one-off sales of lifts, escalators and air conditioning and ventilation systems to complete packages for commercial and
residential building complexes, Mitsubishi electric is ready to provide a solution that best matches building requirement and
user needs.
Mitsubishi electric lifts are contributing to the development and expansion of high-tech cityscapes around the world, and
providing architects and developers with new options for innovative building designs. Unique state-of-the-art technologies are
continuously being introduced lift operation and system efficiency.
From providing conventional and customized straight line escalators the production of the world’s only spiral escalators,
Mitsubishi eclectic is an industry leader in vertical transport. Systems incorporate innovative engineering and energy efficient
technologies that ensure operation efficiency, including the at most reliability, durability and safety.

©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 2768
 International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 11 Issue IV Apr 2023- Available at www.ijraset.com

B. Masaki Nomura, HiroyuIkejima, and Shigetekamorita

The electromagnetic with non asbestos lining shall be spring applied an electrically released type having noiseless operation.
The brake capable of stopping and holding the elevator car in its downward travel to rest with 125% of its rated load from the
maximum governor stripping speed. In this condition the retardation of the car shall not exceed that result in from the operation
of the safety gear or stopping on the buffer. Spring used to apply the beak shoes shall be in compression an adequately
supported. Break lining shall be of renewable incombustible materials and shall be secured to the brake shoes such that
normal wear shall not weaken their fixings. Band breaks shall not be used.

III. PROBLRM STATEMENT

The majority of elevators in buildings today rely on traditional energy sources such as electricity from the grid or diesel generators,
which contribute to greenhouse gas emissions and can be costly to operate. As the world becomes more focused on sustainability,
there is a need for more environmentally-friendly solutions for vertical transportation. The challenge is to design and implement an
elevator system that is powered primarily by renewable energy, such as solar power, and incorporates regenerative technology to
minimize energy consumption and reduce costs. This system should be reliable, efficient, and cost-effective, while also meeting
safety and accessibility standards. The goal of this project is to develop a regenerative solar-powered elevator system that can
operate independently of the grid, reducing the building's energy consumption and carbon footprint. This system should also provide
a comfortable and seamless user experience for building occupants.

IV. CHALLENGES
One of the main challenges for a regenerative solar-powered elevator is designing a system that can generate enough energy from
solar power to operate the elevator consistently, even on days with limited sunlight. Another challenge is ensuring that the system
can store excess energy generated during peak sunlight hours, so that it can be used during periods of low sunlight.
Another challenge is developing a regenerative braking system that can efficiently capture and store the energy generated by the
elevator during descent, and then use it to power the elevator during ascent. This requires advanced engineering and control systems
to ensure that the energy is captured and stored safely, and that the elevator remains stable and secure during operation.
Additionally, it is important to consider the cost-effectiveness and reliability of the system, as well as its compatibility with existing
buildings and infrastructure. The system must be designed to meet safety and accessibility standards, and be capable of integrating
with building management systems and other technology.
Overall, the challenge is to design a regenerative solar-powered elevator system that can efficiently generate and store energy, while
meeting the performance and safety requirements of a traditional elevator system.

V. IMPORTANT FACTOR TO BE CONSIDERED

1) Solar Power Generation: The solar panels used to generate electricity for the elevator system must be capable of producing
enough energy to power the elevator, even on cloudy or low-light days. Factors such as panel orientation, tilt, and shading must
be considered when designing the solar array.
2) Energy Storage: A reliable and efficient energy storage system is necessary to ensure that excess energy generated by the solar
panels is stored and available for use when needed. Batteries or other energy storage systems must be designed to provide
enough power to operate the elevator during periods of low sunlight or high demand.
3) Regenerative Braking: The regenerative braking system must be capable of efficiently capturing and storing energy generated
during descent, and then using it to power the elevator during ascent. This requires advanced control systems and energy
management strategies to ensure that the system operates safely and reliably.
4) Efficiency and Performance: The elevator system must be designed to operate efficiently, using as little energy as possible
while still providing safe and comfortable transportation. The system must also be capable of meeting performance standards
for speed, capacity, and reliability.
5) Safety and Accessibility: The elevator system must meet all safety and accessibility standards, including emergency evacuation
procedures, fire safety, and compliance with building codes and regulations. The system must also be accessible to people with
disabilities and meet relevant accessibility standards.
6) Cost-effectiveness: The regenerative solar-powered elevator system must be cost-effective, both in terms of initial installation
costs and ongoing maintenance and operation costs. The system must provide a reasonable return on investment while still
delivering reliable and efficient transportation.

©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 2769
 International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 11 Issue IV Apr 2023- Available at www.ijraset.com

7) Integration with Building Systems: The elevator system must be capable of integrating with other building systems, such as
building automation and control systems, to ensure efficient operation and energy management. It must also be compatible with
existing building infrastructure and design requirements.

VI. IMPLEMENTATION OF REGENERATIVE DRIVE SYSTEM

A regenerative solar-powered elevator is an elevator that is powered by solar energy and has a regenerative braking system that
recovers energy when the elevator is descending. Here are the steps to implement such an elevator:
Determine the power requirements: The power requirements for an elevator depend on the weight it needs to carry and the speed at
which it needs to travel. You need to calculate the maximum power requirement and design the solar panel system accordingly.
Choose the right solar panels: Solar panels come in different sizes and capacities. You need to choose the right solar panels that can
generate enough power to meet the elevator's needs.
Select the battery system: The battery system is required to store the energy generated by the solar panels. You need to choose the
right battery system that can store enough energy to power the elevator during non-sunlight hours.
Design the regenerative braking system: The regenerative braking system recovers the energy when the elevator is descending. You
need to design a system that can capture this energy and send it back to the battery system for storage.
Install the solar panels and battery system: Once you have designed the system, you need to install the solar panels and battery
system on the elevator shaft or on the roof of the building.
Install the regenerative braking system: The regenerative braking system needs to be installed in the elevator to recover the energy
during descent.

VII. RESULT ANALYSIS

DIFFERENT WEIGHT Voltage (V) OUT PUT
900 GM 7.25
1500 GM 12.76
1800 GM 17.51
2200 GM 19.44

©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 2770
 International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 11 Issue IV Apr 2023- Available at www.ijraset.com

0
6:00 7:00 8:00 9:00 10:00 11:00 12:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00 9:00 10:00
AM AM AM AM AM AM AM PM PM PM PM PM PM PM PM PM PM

8
7
6
5
4
3
2
1
0

X = time per hour

Y = elevator usage

X = different weight
Y = voltage out put

©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 2771
 International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 11 Issue IV Apr 2023- Available at www.ijraset.com

VIII. CONCLUSION
Regenerative solar-powered elevators are an innovative and sustainable solution for vertical transportation systems. These elevators
capture and reuse energy that would otherwise be lost during operation, making them highly energy-efficient and cost-effective.
To design a successful regenerative solar-powered elevator, it is important to focus on objectives such as energy efficiency,
renewable energy, reliability and safety, cost-effectiveness, accessibility, and innovation. By considering these objectives, elevators
can be designed to provide a safe, reliable, and sustainable solution for vertical transportation.
The key components of a regenerative solar-powered elevator system include solar panels, battery storage systems, regenerative
braking systems, and control systems. These components work together to capture, store, and reuse energy during elevator
operation, reducing the overall energy consumption of the system.
The development of regenerative solar-powered elevators represents an important step forward in sustainable transportation
technology. By utilizing renewable energy sources and incorporating innovative design features, these elevators can provide a more
environmentally friendly and cost-effective alternative to traditional vertical transportation systems.

REFERENCES
[1] Banke, A., Bergman, P., & Olsson, H. (2017). Regenerative drives in elevators- field test results and energy calculations. Energy and Buildings, 150, 200-210.
[2] Bak, C., & Nagy, Z. (2019). Energy efficient elevators: A review and outlook. Renewable and Sustainable Energy Reviews, 113, 109243.
[3] Li, Y., Li, M., Li, X., & Wang, H. (2018). A regenerative energy recovery system for elevator based on a brushless doubly-fed machine. IEEE Transactions on
Industry Applications, 54(6), 5786-5796.
[4] Liu, X., & Xu, L. (2020). An energy harvesting method from elevator system based on flywheel energy storage. Energy and Buildings, 215, 109876.
[5] Lee, K., Han, K., Lee, K., & Kim, T. (2018). Development of a regenerative energy-saving drive system for existing elevators. Energies, 11(12), 3481.
[6] Bojić, M., Stanić, N., & Ćosić, B. (2019). Experimental validation of a regenerative drive for energy-efficient elevators. Energies, 12(18), 3464.
[7] Samad, S., Elahi, M., Memon, S. A., & Shaikh, F. K. (2020). Energy harvesting in elevators for power generation: A review. Energy Reports, 6, 2553-2564.
[8] Elahi, M., Samad, S., Memon, S. A., & Shaikh, F. K. (2019). Harvesting energy from elevator braking for power generation: A case study in
Pakistan.Renewable Energy, 143, 1887-1896.
[9] Zhang, X., Xu, L., & Cao, Q. (2019). Regenerative energy recovery fromelevator systems using hydraulic accumulators. Energy, 186, 115832.
[10] Yan, L., Yu, Z., Wu, Z., Zhang, J., & Jiao, Y. (2017). Energy recovery analysisof a novel ropeless elevator using a supercapacitor. Energy, 137, 825-834.

©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 2772