Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Bosch MS3+MS3Sport 101 Eng

    Uploaded by

    Dieter van Rooyen
    This document explains how to connect a Bosch MS3 or MS3 Sport ECU to AiM devices. It details that the ECU can connect via either a 22-pin Deutsch connector or an F connector, and provides the pinout mappings. It also explains that the AiM device must be configured in AiM Race Studio software by selecting Bosch as the manufacturer and MS3 or MS3 Sport as the model. Finally, it lists the channels that will be available depending on whether the MS3 or MS3 Sport protocol is used.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bosch MS3+MS3Sport 101 Eng

    Uploaded by

    Dieter van Rooyen
    31 views5 pages
    This document explains how to connect a Bosch MS3 or MS3 Sport ECU to AiM devices. It details that the ECU can connect via either a 22-pin Deutsch connector or an F connector, and provides the pinout mappings. It also explains that the AiM device must be configured in AiM Race Studio software by selecting Bosch as the manufacturer and MS3 or MS3 Sport as the model. Finally, it lists the channels that will be available depending on whether the MS3 or MS3 Sport protocol is used.

    Original Title

    Bosch_MS3+MS3Sport_101_eng

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document explains how to connect a Bosch MS3 or MS3 Sport ECU to AiM devices. It details that the ECU can connect via either a 22-pin Deutsch connector or an F connector, and provides the pinout mappings. It also explains that the AiM device must be configured in AiM Race Studio software by selecting Bosch as the manufacturer and MS3 or MS3 Sport as the model. Finally, it lists the channels that will be available depending on whether the MS3 or MS3 Sport protocol is used.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views5 pages

    Bosch MS3+MS3Sport 101 Eng

    Uploaded by

    Dieter van Rooyen
    This document explains how to connect a Bosch MS3 or MS3 Sport ECU to AiM devices. It details that the ECU can connect via either a 22-pin Deutsch connector or an F connector, and provides the pinout mappings. It also explains that the AiM device must be configured in AiM Race Studio software by selecting Bosch as the manufacturer and MS3 or MS3 Sport as the model. Finally, it lists the channels that will be available depending on whether the MS3 or MS3 Sport protocol is used.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    AiM Infotech

    Bosch MS3 and


    Bosch MS3 Sport ECU

    Release 1.01
    This tutorial explains how to connect Bosch MS3 ECU to AiM devices.

    1
    Supported models
    Supported ECU models are:

    • Bosch MS3
    • Bosch MS3 Sport

    2
    Connection to AiM devices
    Bosch MS3 and Bosch MS3 Sport ECU feature a bus communication protocol based on CAN that can
    be reached in two ways: through the 22 pins diagnosis Deutsch female connector you find on the ECU
    wiring and shown here below on the left (recommended) or using "F" connector highlighted here
    below on the right. Bottom of them is connection table.

    ECU connector pin Pin function AiM cable


    F29 CAN High CAN+
    F12 CAN Low CAN-

    22 pins Deutsch connector pin Pin function AiM cable


    4 CAN High CAN+
    16 CAN Low CAN-
    1
    3
    AiM device configuration
    Before connecting the ECU to AiM device set this up using AiM Race Studio software. The parameters
    to select in the device configuration are:

    • ECU manufacturer: “Bosch”


    • ECU Model:
    o "MS3" or
    o "MS3 SPORT"

    4
    Available channels
    Channels received by AiM devices connected to "Bosch" ECU changes according to the selected
    protocol.

    2
    4.1
    "Bosch" "MS3" protocol
    Channels received by AiM devices connected to "Bosch" "MS3" protocol are:

    ID CHANNEL NAME FUNCTION


    ECU_1 BOSCH_RPM RPM
    ECU_2 BOSCH_SPEED1 Speed 1
    ECU_3 BOSCH_SPEED2 Speed 2
    ECU_4 BOSCH_OIL_PRESS Oil pressure
    ECU_5 BOSCH_FUEL_PRESS Fuel pressure
    ECU_6 BOSCH_ATM_PRESS Atmospheric pressure
    ECU_7 BOSCH_FUEL_TEMP Fuel temperature
    ECU_8 BOSCH_OIL_TEMP Oil temperature
    ECU_9 BOSCH_ENGINE_TEMP Engine temperature
    ECU_10 BOSCH_AIR_TEMP Intake air temperature
    ECU_11 BOSCH_THROTT_ANG Throttle angle
    ECU_12 BOSCH_IGNIT_ANG Ignition angle
    ECU_13 BOSCH_AIR_CHARGE Air charge
    ECU_14 BOSCH_INJEC_TIME1 Injection time 1
    ECU_15 BOSCH_INJEC_TIME2 Injection time 2
    ECU_16 BOSCH_LAMBDA1 Lambda value 1
    ECU_17 BOSCH_LAMBDA2 Lambda value 2
    ECU_18 BOSCH_LAM_CONTR1 Lambda control 1
    ECU_19 BOSCH_LAM_CONTR2 Lambda control 2
    ECU_20 BOSCH_FUEL_USED Injected fuel
    ECU_22 BOSCH_GEAR Engaged gear
    ECU_23 BOSCH_VBATT Battery supply

    3
    4.2
    "Bosch" "MS3 SPORT" protocol
    Channels received by AiM devices connected to "Bosch" "MS3 SPORT" protocol are:

    ID CHANNEL NAME FUNCTION


    ECU_1 MS3_RPM RPM
    ECU_2 MS3_SPEED Speed
    ECU_3 MS3_TPS Throttle position sensor
    ECU_4 MS3_GEAR Engaged gear
    ECU_5 MS3_WH_SPD_FL Front left wheel speed
    ECU_6 MS3_WH_SPD_FR Front right wheel speed
    ECU_7 MS3_WH_SPD_RL Rear left wheel speed
    ECU_8 MS3_WH_SPD_RR Rear right wheel speed
    ECU_9 MS3_LAM1 Lambda 1
    ECU_10 MS3_LAM2 Lambda 2
    ECU_11 MS3_OIL_P Oil pressure
    ECU_12 MS3_ATM_P Intake air temperature
    ECU_13 MS3_FUEL_P Fuel pressure
    ECU_14 MS3_CRANK_P Crank pressure
    ECU_15 MS3_OIL_T Oil temperature
    ECU_16 MS3_ATM_T Intake air temperature
    ECU_17 MS3_FUEL_T Fuel temperature
    ECU_18 MS3_ECT Engine cooling temperature
    ECU_19 MS3_EX_T1 Exhaust temperature 1
    ECU_20 MS3_EX_T2 Exhaust temperature 2
    ECU_21 MS3_BATTVOLT Battery supply

    You might also like