Mat 1210 For Suppliers
Mat 1210 For Suppliers
Mat 1210 For Suppliers
PROPERTIES:
Hot rolled boiler plate, wide flats and shapes for medium temperatures.
Tensile strength Rm > 400 MPa.
STANDARDS:
General requirements:
When reference to this MAT NO appears on FLS Drawing or FLS Parts List or in FLS Purchace Order the data from the
Primary Standard is used as acceptance criteria.
Specific deviations in requirements made in the FLS Parts List, the FLS Purchace Order or a FLS Instruction always
overrules this data sheet.
Alternatively accepted International Standards listed in this sheet may be used if the suppliers documentation covers at
least the documentation required in the Primary Listed Standard. This means that supplementary tests in some cases
will be necessary.
Primary Standard:
EN 10028-2 (2003) , MATERIAL: P 265 GH , MATERIAL No.: 1.0425
Flat products made of steel for pressure purposes - Part 2: Non-alloy and alloy steels with specified
elevated temperature properties
CHEMICAL COMPOSITION:
Dim, mm % C max % Si max % Mn max or % P max % S max % N max % Al min
or range or range range or range or range or range or range
0-6 0.2 0.4 0.6-1.4 0.025 0.015 0.012 0.02
6- 0.20 0.40 0.8-1.4 0.025 0.015 0.012 0.020
Dim, mm % Cr max % Mo max % Ni max % V max % Nb max % Ti max % Cu max % Other max
or range or range or range or range or range or range or range or range
0-6 0.30 0.08 0.30 0.02 0.02 0.03 0.30
6- 0.30 0.08 0.30 0.02 0.020 0.03 0.30
%Cr+%Cu+%Mo+%Ni=0.70
DELIVERY CONDITIONS:
Products supplied according to the primary standard shall be delivered in normalised or in an equivalent
condition unless otherwise agreed upon.
Alternative accepted International Standards listed at the end of this sheet may be used if the final
documentation covers at least the documentation expected in the primary listed standard. This means
that supplementary tests in some cases will be necessary.
Revisions:
Rev. No Rev. Date Change Responsible
0,6 31-01-2002 Text editions AnJo
Prepared & Approved changed
References to Alternative Standards added to supplier version
Added temp requirements for 300 oC.