Pipe Valves, Fittings and Nipples

Pressures to 15,200 psi (1,050 bar)

MAXIMATOR has been designing and manufacturing high pressure equipment

for more than thirty years and has a worldwide reputation for quality and reli-
ability, backed by one of the best service organizations in the industry. Index
Pipe Valves, Fittings and Nipple feature: Pipe Valves. . . . . . . . . . . . . . . . . . . . . 2-3
▸ Rising stem design. Pipe Fittings. . . . . . . . . . . . . . . . . . . . 4-7
▸ 316 L (1.4404) wetted parts for excellent corrosion resistance. Pipe Hex Nipples . . . . . . . . . . . . . . . . . 8
▸ Metal-to-metal seating achieves bubble-tight shut-off, longer stem Pipe O-Ring Check Valves. . . . . . . . . . . 9
and seat life, greater durability for repeated open and close cycles. Pipe Ball Check Valves . . . . . . . . . . . . 10
▸ PTFE and carbon packing with metal back-up rings offers reliable stem Pipe Line Filters . . . . . . . . . . . . . . . . . 11
to body sealing.
▸ Non-rotating stem prevents stem to seat galling
▸ Stem sleeve and packing gland materials have been selected to achieve
optimum thread cycle life and reduced handle torque. All stem sleeve
threads are rolled, assuring smooth operation.
▸ Two different valve body patterns, with choice of vee or regulating
type stem tip.
MAXIMATOR offers a complete line of pipe fittings, pipe hex nipples, pipe check
valves and pipe line filters. All pipe valves and fittings use the NPT connection.
Note: When selecting multiple items, the pressure rating would be that of the
lowest rated component.

Factory MAXIMATOR GmbH

Lange Straße 6 Telephon: +49 (0) 3631 9533-0
99734 Nordhausen / Germany Facsimile: +49 (0) 3631 9533-10
Internet www.maximator.de E-Mail: info@maximator.de

All technical and dimensional information subject to change. All general Terms and Conditions of sale,
including limitations of our liability, apply to all products and services sold.
3999.1946 – 05/2011 1
Pipe Valves
Pressures to 15,200 psi (1,050 bar)
MAXIMATOR pipe valves with metal to metal seats have a
high level of safety and reliability under adverse operating
conditions. These valves may be used both with gases and
liquids.
Traceability is ensured through extensively documented data
(batch number, maximum pressure, material number, type
designation).

Pressure/Temp.
Connection Orifice Size Rated Rating
Size in. Type in. (mm) Cv* psi @ R.T. (bar)**
1/4 4B/4P 0.201 (5.1) 0.75 15,200 (1,050)
3/8 6B/6P 0.312 (7.9) 1.30 15,200 (1,050)
1/2 8B/8P 0.312 (7.9) 1.30 15,200 (1,050)

* Cv valves shown are for 2-way straight pattern valves.

For 2-way angle patterns, increase the Cv value by 50%.
** See page 2 for Pressure/Temperature Rating Chart.

Ordering Information Flow Coefficient Reference Curves (Cv)

Typical catalog number: 15V4B071

15V 8B 07 1 OPTIONS
7
Valve Thread Size Stem Type Body Pattern Extreme
Series temperature
option, see 6
15V 4B – 1/4”BSP 07 – non-rotating 1 – two-way straight below.
Number of turns open

4P – 1/4”NPT VEE stem 2 – two-way angle 5

08 – non-rotating Regulating Stem
6B – 3/8”BSP
REGULATING stem 4
6P – 3/8”NPT (tapered tip for
8B – 1/2”BSP regulating and 3
8P – 1/2”NPT shutoff)
Vee Stem
2

Special Designs for Extreme Temperatures 1

Standard valves are supplied with Teflon/Carbon packing and 0
may be operated to 450°F (230°C). High temperature packing 10 20 30 40 50 60 70 80 90 100
% of rated Cv
and/or extended stuffing box are available for service from
-423°F to 1200°F (-217°C to 650°C) by adding the following
suffixes to catalog order number.
- TG standard valve with Teflon glass packing to 600°F.
(315°C).
Anodized
- GY standard valve with graphite braided yarn packing Aluminum
to 800°F (425°C). Handle

- HT extended stuffing box valve with graphite braided Non-Rotating Stem Low Friction
(Vee & Regulating Packaging Gland
yarn packing to 1200°F (620°C). Designs)
- B standard valve with cryogenic trim materials and
316L Valve Body Positive
Teflon packing to -100°F (-73°C). Locking Device

- LT extended stuffing box valve with Teflon packing

and cryogenic trim materials to -423°F (-252°C). Adjustable Anti-Extrusion
Packing Seal Rings

Repair Kits
Consult your MAXIMATOR representative for repair kits and Metal to Metal
Seating
valve bodies. Refer to the Tools and Installation section for
proper maintenance procedures.

Valve Shown: 15V4B071

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
2 3999.1946 – 05/2011
 Pipe Valves
Pressures to 15,200 psi (1,050 bar)

Stem Thread Orifice Dimensions in. (mm) Valve Block

Catalog
Valve Pattern in. Panel Thick-
Number Type Size (mm) A B C D E F H I J Hole ness

2-Way Straight
15V4B071 Vee

15V4B081 Reg 0.201 4.61 2.01 1.62 0.22 0.37 1.24 2.95 1.19 2.01 0.75 0.79
1/4
15V4P071 Vee (5.1) (117) (51) (41.1) (5.5) (9.5) (31.5) (75) (30.2) (51) (19.1) (20)

15V4P081 Reg

15V6B071 Vee

15V6B081 Reg 0.312 6.3 2.88 2.38 0.37 0.45 1.38 3.94 1.75 2.50 1.00 1.02
3/8
15V6P071 Vee (7.9) (160) (73.2) (60.5) (9.5) (11.5) (35) (100) (44.5) (63.5) (25.4) (26)

15V6P081 Reg

15V8B071 Vee

15V8B081 Reg 0.312 6.496 3.11 2.36 0.37 0.45 1.38 3.94 1.73 2.64 1.00 1.54
1/2
15V8P071 Vee (7.9) (165) (79) (60) (9.5) (11.5) (35) (100) (44) (67) (25.4) (39)

15V8P081 Reg

2-Way Angle
15V4B072 Vee

15V4B082 Reg 0.201 5.00 2.43 1.19 0.22 0.37 1.24 2.95 1.00 2.01 0.75 0.79
1/4
15V4P072 Vee (5.1) (127) (61.7) (30.2) (5.5) (9.5) (31.5) (75) (25.4) (51) (19.1) (20)

15V4P082 Reg

15V6B072 Vee

15V6B082 Reg 0.312 6.77 3.38 1.75 0.37 0.45 1.38 3.94 1.25 2.50 1.00 1.02
3/8
15V6P072 Vee (7.9) (172) (85.9) (44.5) (9.5) (11.5) (35) (100) (31.8) (63.5) (25.4) (26)

15V6P082 Reg

15V8B072 Vee

15V8B082 Reg 0.312 6.464 3.11 1.73 0.37 0.45 1.38 3.94 1.32 2.64 1.00 1.54
1/2
15V8P072 Vee (7.9) (164) (79) (44) (9.5) (11.5) (35) (100) (33.5) (67) (25.4) (39)

15V8P082 Reg
G - Panel mounting screw thread size 10-24 UNC (screw included).
All dimensions are for reference only and are subject to change.

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
3999.1946 – 05/2011 3
Pipe Fittings
Pressures to 15,200 psi (1,050 bar)

MAXIMATOR Pipe Fittings are designed for liquid and gas applications.
The P Series Fittings are available from 1/4” to 1”NPT to 15,200 psi
(1,050 bar).
NPT threads must be sealed using a high quality PTFE tape and/or paste
product. Sealing performance may vary based on many factors such as
pressure, temperature, media, thread quality, thread material, proper
thread engagement and proper use of thread sealant.
MAXIMATOR recommends to limit the number of times an NPT fitting
is assembled and disassembled because thread deformation during as-
sembly will result in deteriorating seal quality over time. When using
only PTFE tape, using thread lubrication to prevent galling of mating
parts is recommended.

Dimensions in. (mm)

Connection Orifice Block
Catalog
Fitting Pattern in. Thick-
Number Type A B C D E F G
(mm) ness

Pipe Elbow
0.201 0.75 1.14 1.54 0.75 0.49 0.49 0.22 0.79
15L4P 1/4” NPT
(5.1) (19) (29) (39) (19) (12.5) (12.5) (5.5) (20)

0.312 1.00 1.50 2.01 1.00 0.63 0.63 0.26 1.02

15L6P 3/8” NPT
(7.9) (25.4) (38) (51) (25.4) (16) (16) (6.5) (26)

0.312 1.50 1.89 2.99 1.25 0.84 1.08 0.33 1.38

15L8P 1/2” NPT
(7.9) (38) (48) (76) (31.8) (21.3) (27.5) (8.5) (35)

0.685 1.50 2.24 2.99 1.50 1.00 1.00 0.35 1.38

15L12P 3/4” NPT
(17.4) (38) (57) (76) (38) (25.4) (25.4) (9) (35)

0.685 2.07 2.52 4.13 1.57 1.10 1.38 0.53 1.77

15L16P 1” NPT
(17.4) (52.5) (64) (105) (40) (28) (35) (13.5) (45)

Pipe Tee
0.201 0.77 1.14 1.54 0.75 0.49 1.02 0.22 0.79
15T4P 1/4” NPT
(5.1) (19.5) (29) (39) (19) (12.5) (26) (5.5) (20)

0.312 1.00 1.50 2.01 1.00 0.63 1.26 0.26 1.02

15T6P 3/8” NPT
(7.9) (25.4) (38) (51) (25.4) (16) (32) (6.5) (26)

0.312 1.50 1.89 2.99 1.26 0.87 2.00 0.35 1.38

15T8P 1/2” NPT
(7.9) (38) (48) (76) (32) (22) (51) (9) (35)

0.685 1.50 2.20 2.99 1.50 1.00 2.00 0.35 1.38

15T12P 3/4” NPT
(17.4) (38) (56) (76) (38) (25.4) (51) (9) (35)

0.685 2.07 2.52 4.13 1.57 1.10 2.76 0.53 1.77

15PT16P 1” NPT
(17.4) (52.5) (64) (105) (40) (28) (70) (13.5) (45)

See page 2 in the Technical Section for pressure/temperature rating chart.

All dimensions are for reference only and are subject to change.

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
4 3999.1946 – 05/2011
 Pipe Fittings
Pressures to 15,200 psi (1,050 bar)

Dimensions in. (mm)

Connection Orifice Block
Catalog
Fitting Pattern in. Thick-
Number Type A B C D E F G
(mm) ness

Pipe Cross
0.201 1.54 0.77 1.54 0.77 0.49 0.98 0.22 0.79
15X4P 1/4” NPT
(5.1) (39) (19.5) (39) (19.5) (12.5) (25) (5.5) (20)

0.312 2.01 1.00 2.01 1.00 0.63 1.26 0.26 1.02

15X6P 3/8” NPT
(7.9) (51) (25.4) (51) (25.4) (16) (32) (6.5) (26)

0.312 2.99 1.50 2.52 1.26 0.87 2.01 0.35 1.38

15X8P 1/2” NPT
(7.9) (7.6) (38) (64) (32) (22) (51) (9) (35)

0.685 2.99 1.50 2.99 1.50 1.00 2.01 0.35 1.38

15X12P 3/4” NPT
(17.4) (7.6) (38) (76) (38) (25.4) (51) (9) (35)

0.685 4.13 2.07 3.15 1.57 1.10 2.76 0.53 1.77

15X16P 1” NPT
(17.4) (105) (52.5) (80) (40) (28) (70) (13.5) (45)

Pipe Coupling
0.201 1.50 0.81
15F4P 1/4” NPT
(5.1) (38.1) (20.6)

0.312 1.63 1.06

15F6P 3/8” NPT
(7.9) (41.3) (27)

0.312 2.05 1.19

15F8P 1/2” NPT
(7.9) (52) (30.2)

0.685 2.72 1.44

15F12P 3/4” NPT
(17.4) (69) (36.5)

0.685 2.52 2.00

15F16P 1” NPT
(17.4) (64) (50.8)

Pipe Bulkhead Coupling

0.201 2.00 1.06 0.9 0.63 0.71
15BF4P 1/4” NPT
(5.1) (50.8) (27) (23) (16) (18)

0.312 2.38 1.44 1.14 0.79 0.63

15BF6P 3/8” NPT
(7.9) (60.5) (36.5) (29) (20) (16)

0.312 2.63 1.63 1.39 0.91 0.63

15BF8P 1/2” NPT
(7.9) (66.8) (41.28) (35.5) (23) (16)

0.685 2.63 2.00 1.69 0.91 0.47

15BF12P 3/4” NPT
(17.4) (66.8) (50.8) (43) (23) (12)

0.685 3.50 2.00 1.97 1.50 0.39

15BF16P 1” NPT
(17.4) (89) (50.8) (50) (38) (10)

See page 2 in the Technical Section for pressure/temperature rating chart.

All dimensions are for reference only and are subject to change.

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
3999.1946 – 05/2011 5
Pipe Fittings
Pressures to 15,200 psi (1,050 bar)

Dimensions in. (mm)

Connection Orifice Block
Catalog
Fitting Pattern in. Thick-
Number Type A B C D E F G
(mm) ness

Pipe Plugs
1.10 0.69
15P4P 1/4” NPT
(28) (17.5)

1.10 0.88
15P6P 3/8” NPT
(28) (22.2)

1.50 1.06
15P8P 1/2” NPT
(38) (27)

1.50 1.44
15P12P 3/4” NPT
(38) (36.5)

1.89 1.44
15P16P 1” NPT
(48) (36.5)

Street Pipe Elbow

0.201 1.50 1.50 1.13 1.00 0.79
15SPL4P 1/4” NPT
(5.1) (38.1) (38.1) (28.7) (25.4) (20)

0.312 1.76 1.50 1.25 1.00 1.02

15SPL6P 3/8” NPT
(7.9) (44.8) (38.1) (31.8) (25.4) (26)

0.312 2.25 2.00 1.63 1.25 1.02

15SPL8P 1/2” NPT
(7.9) (57.2) (50.8) (41.4) (31.8) (26)

0.685 2.5 2.62 1.81 1.70 1.54

15SPL12P 3/4” NPT
(17.4) (63.5) (66.6) (46) (43.3) (39)

0.685 2.99 2.99 2.13 2.01 1.77

15SPL16P 1” NPT
(17.4) (76) (76) (54) (51) (45)

Male Pipe Elbow

0.201 1.50 1.50 1.13 1.13 0.79
15MPL4P 1/4” NPT
(5.1) (38) (38) (28.7) (28.7) (20)

0.312 1.75 1.75 1.25 1.25 1.02

15MPL6P 3/8” NPT
(7.9) (44.5) (44.5) (31.8) (31.8) (26)

0.312 2.00 2.00 1.47 1.47 1.02

15MPL8P 1/2” NPT
(7.9) (50.8) (50.8) (37.4) (37.4) (26)

0.685 2.62 2.62 1.87 1.87 1.54

15MPL12P 3/4” NPT
(17.4) (66.6) (66.6) (47.6) (47.6) (39)

0.685 2.99 2.99 2.13 2.13 1.77

15MPL16P 1” NPT
(17.4) (76) (76) (54) (54) (45)

See page 2 in the Technical Section for pressure/temperature rating chart.

All dimensions are for reference only and are subject to change.
All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
6 3999.1946 – 05/2011
 Pipe Fittings
Pressures to 15,200 psi (1,050 bar)

Dimensions in. (mm)

Connection Orifice Block
Catalog
Fitting Pattern in. Thick-
Number Type A B C D E F G
(mm) ness

Male Pipe Tee

0.201 2.26 1.50 1.13 1.13 0.79
15MPT4P 1/4” NPT
(5.1) (57.4) (38) (28.7) (28.7) (20)

0.312 2.50 1.75 1.25 1.25 1.02

15MPT6P 3/8” NPT
(7.9) (63.5) (44.5) (31.8) (31.8) (26)

0.312 3.00 2.00 1.50 1.50 1.02

15MPT8P 1/2” NPT
(7.9) (76.2) (50.8) (38) (38) (26)

0.685 3.50 2.62 1.75 1.77 1.54

15MPT12P 3/4” NPT
(17.4) (89) (66.6) (44.5) (44.5) (39)

0.685 4.13 2.99 2.07 2.13 1.77

15MPT16P 1” NPT
(17.4) (105) (76) (52.5) (54) (45)

Street Pipe Tee

0.201 2.00 1.38 1.15 1.00 0.79
15SPT4P 1/4” NPT
(5.1) (50.8) (35) (29.3) (25.4) (20)

0.312 2.50 1.50 1.5 1.00 1.02

15SPT6P 3/8” NPT
(7.9) (63.5) (38) (38) (25.4) (26)

0.312 3.00 2.00 1.63 1.25 1.26

15SPT8P 1/2” NPT
(7.9) (76.2) (50.8) (41.4) (31.8) (32)

0.685 3.15 2.62 1.85 1.70 1.54

15SPT12P 3/4” NPT
(17.4) (80) (66.6) (46.9) (43.3) (39)

0.685 4.13 2.99 2.13 2.13 1.77

15SPT16P 1” NPT
(17.4) (105) (76) (54) (54) (45)

Male Branch Tee

0.201 2.00 1.50 1.00 1.13 0.79
15BPT4P 1/4” NPT
(5.1) (50.8) (38) (25.4) (28.7 (20)

0.312 2.00 1.75 1.00 1.25 1.02

15BPT6P 3/8” NPT
(7.9) (50.8) (44.5) (25.4) (31.8) (26)

0.312 3.00 2.25 1.50 1.62 1.26

15BPT8P 1/2” NPT
(7.9) (76.2) (57.2) (38) (41.2) (32)

0.685 3.00 2.62 1.50 1.87 1.54

15BPT12P 3/4” NPT
(17.4) (76.2) (66.6) (38) (47.6) (39)

0.685 4.13 2.99 2.07 2.13 1.77

15BPT16P 1” NPT
(17.4) (105) (76) (52.5) (54) (45)

See page 2 in the Technical Section for pressure/temperature rating chart.

All dimensions are for reference only and are subject to change.

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
3999.1946 – 05/2011 7
Pipe Hex Nipples
Pressures to 15,200 psi (1,050 bar)

MAXIMATOR Pipe Hex Nipples are designed for rapid system

make-up. They are available in various lengths for pipe valves
and fittings.
In addition to the minimum lengths (Pipe Hex Close Nipples)
and standard lengths listed in the table below, Pipe Hex Nip-
ples are also available in custom length. Please consult fac-
tory.

Dimensions in. (mm)

Working
Catalog Connection Orifice in.
Fitting Pattern Pressure
Number Type (mm) A B (Hex.)
psi (bar)

Pipe Hex Close Nipple

15,200 0.201 1.85 0.69
15M4P 1/4” NPT
(1,050) (5.1) (47) (17.46)
15,200 0.312 1.89 0.88
15M6P 3/8” NPT
(1,050) (7.9) (48) (22.2)
15,200 0.312 2.50 1.06
15M8P 1/2” NPT
(1,050) (7.9) (63.5) (27)
15,200 0.685 2.81 1.44
15M12P 3/4” NPT
(1,050) (17.4) (71.5) (36.5)
15,200 0.685 3.19 1.44
15M16P 1” NPT
(1,050) (17.4) (81) (36.5)
Pipe Hex Nipples
4.00
15M4P-4
(101.6)
15,200 0.201 6.00 0.69
15M4P-6 1/4” NPT
(1,050) (5.1) (152.4) (17.46)
8.00
15M4P-8
(203.2)
4.00
15M6P-4
(101.6)
15,200 0.312 6.00 0.88
15M6P-6 3/8” NPT
(1,050) (7.9) (152.4) (22.2)
8.00
15M6P-8
(203.2)
4.00
15M8P-4
(101.6)
15,200 0.312 6.00 1.06
15M8P-6 1/2” NPT
(1,050) (7.9) (152.4) (27)
8.00
15M8P-8
(203.2)
4.00
15M12P-4
(101.6)
15,200 0.685 6.00 1.44
15M12P-6 3/4” NPT
(1,050) (17.4) (152.4) (36.5)
8.00
15M12P-8
(203.2)
4.00
15M16P-4
(101.6)
15,200 0.685 6.00 1.44
15M16P-6 1” NPT
(1,050) (17.4) (152.4) (36.5)
8.00
15M16P-8
(203.2)
All dimensions are for reference only and subject to change.
All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
8 3999.1946 – 05/2011
 Pipe O-Ring Check Valves
Pressures to 15,200 psi (1,050 bar)

Pipe O-Ring Check Valves

MAXIMATOR Pipe O-Ring Check Valves provide high quality

directional flow control and bubble tight shutoff for liquids and
gases. These check valves are not to be used as a relief device.
The opening pressure of the O-Ring Check Valves is approx. 10
psi (1.5 bar).
Materials:
Body, cover, poppet, cover gland: 316 stainless steel
Spring: 300 series stainless steel
O-ring: Viton “A” (-4°F to 392°F)

Pressure Orifice Dimensions in. (mm)

Rated
Catalog Number Connection Type Rating in. (Cv)
psi (bar) (mm) A B C (Hex.) D (Hex.)

Pipe O-Ring Check Valves

15,200 0.201 3.36 2.40 0.88 0.88
15OC4P 1/4” NPT 0.28
(1,050) (5.1) (85.3) (61) (22.2) (22.2)

15,200 0.312 3.94 2.95 1.44 1.44

15OC6P 3/8” NPT 0.84
(1,050) (7.9) (100) (75) (36.5) (36.5)

15,200 0.312 5.30 3.90 1.44 1.44

15OC8P 1/2” NPT 2.30
(1,050) (7.9) (134.7) (99) (36.5) (36.5)

15,200 0.685 6.29 4.88 2.00 2.00

15OC12P 3/4” NPT 4.70
(1,050) (17.4) (159.8) (124) (50.8) (50.8)

15,200 0.685 7.32 5.75 2.00 2.00

15OC16P 1” NPT 7.40
(1,050) (17.4) (186) (146) (50.8) (50.8)
CAUTION: FREQUENT INSPECTIONS of O-Rings are necessary to ensure proper service of the check
valve. O-Rings have shown satisfactory service life in testing, however different service conditions
may lead to variations in cycle and shelf life.
All dimensions are for reference only and subject to change.

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
3999.1946 – 05/2011 9
Pipe Ball Check Valves
Pressures to 15,200 psi (1,050 bar)

Pipe Ball Check Valves

MAXIMATOR Pipe Ball Check Valves prevent reverse flow where

bubble tight shutoff is not mandatory. These check valves are
designed to operate to 660°F. These check valves are not to be
used as a relief device. The opening pressure of the Pipe Ball
Check Valves is approx. 10 psi (1.5 bar).
Materials:
Body, cover, poppet, cover gland: 316 stainless steel
Ball: 316 stainless steel
Spring: 300 series stainless steel

Pressure Orifice Dimensions in. (mm)

Rated
Catalog Number Connection Type Rating in. (Cv)
psi (bar) (mm) A B C (Hex.) D (Hex.)

Pipe Ball Check Valves

15,200 0.201 3.36 2.40 0.88 0.88
15BC4P 1/4” NPT 0.28
(1,050) (5.1) (85.3) (61) (22.2) (22.2)

15,200 0.312 3.94 2.95 1.44 1.44

15BC6P 3/8” NPT 0.84
(1,050) (7.9) (100) (75) (36.5) (36.5)

15,200 0.312 5.32 3.90 1.44 1.44

15BC8P 1/2” NPT 2.30
(1,050) (7.9) (135.2) (99) (36.5) (36.5)

15,200 0.685 6.29 4.88 2.00 2.00

15BC12P 3/4” NPT 4.70
(1,050) (17.4) (159.8) (124) (50.8) (50.8)

15,200 0.685 7.32 5.75 2.00 2.00

15BC16P 1” NPT 7.40
(1,050) (17.4) (186) (146) (50.8) (50.8)
All dimensions are for reference only and subject to change.

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
10 3999.1946 – 05/2011
 Pipe Line Filter
Pressures to 15,200 psi (1,050 bar)

Pipe Line Filters

MAXIMATOR Pipe Line Filters are used to filter process fluids

in high pressure systems. The cup type design is used when
maximum filtration surface area and a single micron size element
is preferred. This design increases the filter area as much as 6
times the area of the disc type filter, and will permit higher flow
rates with a lower pressure drop, and longer intervals between
element changes. Filter elements come standard in 5, 30, or
56 micron sizes and are easily replaced. Filters are rated for
temperatures -60˚F to 660˚F (-50°C to 350°C).
Materials:
Body, cover, cover gland: 316 series stainless steel
Element: 300 series stainless steel

Filter
Pressure Dimensions in. (mm)
Orifice in. Connection Element
Catalog Number Rating Micron Size
(mm) Type Area in.²
psi (bar) A B C (Hex.) D (Hex.)
(mm)

Pipe Line Filter

15CF4P-5 5
15,200 0.201 0.82 3.25 2.36 0.88 0.88
15CF4P-30 30 1/4” NPT
(1,050) (5.1) (530) (82.5) (60) (22.2) (22.2)
15CF4P-56 56

15CF6P-5 5
15,200 3.94 1.55 3.69 2.83 1.19 1.44
15CF6P-30 30 3/8” NPT
(1,050) (100) (1,000) (93.84) (72) (30.2) (36.5)
15CF6P-56 56

15CF8P-5 5
15,200 3.94 1.55 4.42 3.35 1.44 1.44
15CF8P-30 30 1/2” NPT
(1,050) (100) (1,000) (112.4) (85) (36.5) (36.5)
15CF8P-56 56

15CF12P-5 5
15,200 0.685 6.14 6.57 5.12 2.00 2.00
15CF12P-30 30 3/4” NPT
(1,050) (17.4) (3,690) (66.94) (130) (50.8) (50.8)
15CF12P-56 56

15CF16P-5 5
15,200 0.685 6.14 6.77 5.31 2.00 2.00
15CF16P-30 30 1” NPT
(1,050) (17.4) (3,690) (171.9) (135) (50.8) (50.8)
15CF16P-56 56

It is recommended that all fluids entering a high pressure system be thoroughly cleaned.
Maximator filters are designed to remove small amounts of process particles. Pressure
differential should not exceed 1000 psi across the filter elements.
All dimensions for reference only and are subject of change.

All technical and dimensional information subject to change. All general Terms and Conditions
of sale, including limitations of our liability, apply to all products and services sold.
3999.1946 – 05/2011 11