MiCOM C264 Human Interface

DS Agile Training Level 1

Global Systems Engineering
03/05/2012

GRID

GSE

SAM
 Summary

1) Front Face General Description Page 3

2) LCD Description Page 12

3) Menu Tree Page 23

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 2
 1.1) MiCOM C264 / C264C (1)

C264C With LCD

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 3
 1.1) MiCOM C264 / C264C (2)

C264 With LCD

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 4
 1.1) MiCOM C264 / C264C (3)

C264C Without LCD

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 5
 1.1) MiCOM C264 / C264C (4)

C264 Without LCD

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 6
 1.2) MiCOM C264 Front Face

Large graphic Display control

Large illuminated display

Pre-affected LED

Navigation
keys

Local/Remote
command
Settable LED

Operating keys Open/Close command

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 7
 1.3) LED Overview

FRONT FACE

C264C 40TE C264M 80TE

(4U-170mm) (4U-170mm)

- 4 System LED - 5 System LED

- 13 Configurable LED - 12 Configurable LED

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 8
 1.4) System LED

FAULTY OFF No fault

ON DB error, Hardware error
LED 0 FLASHING Slow Not used
FLASHING Fast ISaGRAF Fault (cycle too long,Queue overflow, POU faulty

ALARM OFF No Alarm

ON Alarm acknowledged
LED 1 FLASHING Slow Alarm inactive acknowledged
FLASHING Fast At least one alarm not acknowledged

MODE OFF Reboot

ON Operational mode
FLASHING Slow Maintenance mode
LED 2 FLASHING Fast Test mode
POWER OFF power off
ON power on
FLASHING Slow Not used
LED 3 FLASHING Fast Not used

LOCAL/REMOTEOFF All bays are in remote mode

simple HMI ON All bays are in local mode
only FLASHING Slow At least one bay in local mode
LED 4 FLASHING Fast Not used

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 9
 1.5) Configurable LED

LED 5
LED from 5 to LED 16 are controlled via SPS or DPS
LED 6
LED 7 SPS or DPS state

LED 8 SET off / on / flashing slow / flashing fast

LED 9 RESET off / on / flashing slow / flashing fast
LED 10 INVALID off / on / flashing slow / flashing fast
LED 11
LED 12
LED 13
Examples
LED 14 OFF Event Not Present, Reset, Remote, Disable
LED 15 ON Event Present, Set, Local, Enable
BLINK SLOW Event Invalid (Fault, unknown, undefined, Invalid,..)
LED 16
BLINK FAST Events of high gravity
GSE
L1 - 04-MICOM C264 HMI - Rev G - P 10
 Summary

1) Front Face General Description Page 3

2) LCD Description Page 12

3) Menu Tree Page 23

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 11
 2.1) LCD Overview
Default View : Bay panel

Bay Name Computer

12 char Time
+
Bay L/R Animated object
Note : Transformer +
Tap Changer
(min, max, current)

Bay Topology :
•Use extra short name
•Representation with
two drawing sets Optional AI Mini list M = Measurements
Optional bar graph S = States
up to 4 MV C = Controls
Configuration : included into DS Agile SCE Graphic Editor
GSE
L1 - 04-MICOM C264 HMI - Rev G - P 12
 2.2) Buttons

General Services
CLEAR

LEFT/RIGHT ENTER
switch panels
PAGE

UP/DOWN
scroll Lists

LOCAL/
REMOTE

SELECTION OPEN/OFF CLOSE/ON

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 13
 2.3) LCD Panels Management (1)

Bay Panels (up to 12)

monitor and control devices, access to measurements and status

Alarm Panel
acknowledgement and alarm clearing

Event Panel
FIFO list of 200 events

Fault Panel
C264 faults

Disturbance Panel

IED and C264 disturbance files

Services Panel
general information, board status, IED connection status

I/O status Panel
DI couplers and DO contacts status on DI, DO and CCU boards
GSE
L1 - 04-MICOM C264 HMI - Rev G - P 14
 2.3) LCD Panels Management (2)

Bay panels
1 to 12 BAY_0 Alarms
1
Measurements panel

Events
panel
Input/Output
panel

Menu Fault
Tree panel
Panel
Services panels:
General Info,
Board Info, IED Disturbance
Info Record panel

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 15
 2.4) LCD Bay Panel

On Bay Panel, Operator can :

Access other bay panels by pressing on G

Select devices for command by pressing on

Control switching devices :
Put in “ON” or “CLOSED” by pressing on I

Put in “OFF” or “OPEN” by pressing on O

Then for execution (SBO case)

Control Tap Position :
Raise by pressing on
Lower by pressing on G

G
GoToMax by pressing on
GoToMin by pressing on G

Then same button again for execution (SBO case)

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 16
 2.5) LCD Events Panel

EVENTS <time>
Event Rank in circular queue
047
01/04/02
S12:15:10.123
FEEDER 63kV /5
SW63-5-2BB1
POSITION DPS
OPEN Event date time with
048 synchronisation attribute
01/04/02 S12:05:10.123
FEEDER 63kV /5 Bay / Module / Datapoint / Status
SW63-5-2BB1
POSITION DPS
CLOSED
↑↓

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 17
 2.6) LCD Alarms Panel

ALARMS
Alarm appearance date with
01/04/02S12:15 :10.123 synchronisation attribute
ACTIVE-UNACK 3
0 1 / 0 4 / 02 S 1 2 : 1 5 : 1 0 . 1 2 3
Alarm State and Gravity
FEEDER63kV/5
SW 63-5- 2 BB1
POSITION DPS
OPEN Alarm last change of state
date with synchronisation
attribute

↑↓

Alarm Selection Acknowledge selected Clear selected inactive,

alarm (password) ack. alarm (password)
GSE
L1 - 04-MICOM C264 HMI - Rev G - P 18
 2.7) LCD Service Panel (1)

General Services :

MAC @

Software version

Database version

Operating Mode

...

Board Status :

List of boards present in rack / configuration
OK => Board OK
Missing => in DB but not in rack
Too Many => in rack but not in DB
Faulty => Faulty board

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 19
 2.7) LCD Service Panel (2)

Number of C264 that are

IEDS *12:45:12
client for this device
NB CLIENT IP : 000
T103 devices list :
IED T103
P632_2_1 -Name + address
001 DECONNEC -Connection status

1/1

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 20
 2.8) LCD Other Panels

Other Panels :

DISTURBANCE
Is showing disturbance records from IED or CT/VT waveforms

INPUT/OUPUT
Is showing every I/O board channel status

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 21
 Summary

1) Front Face General Description Page 3

2) LCD Description Page 12

3) Menu Tree Page 23

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 22
 3.1) Menu Tree Panel Access

BAY_0
Bay 1
Events
panels panel
1 to 12

Alarms
Input/Output
panel
Panel

Menu
Tree
Panel Fault
panel

Services Panel
Disturbance
Record panel
GSE
L1 - 04-MICOM C264 HMI - Rev G - P 23
 3.2) Menu Tree Main Menu

MENU TREE

COMMAND
Describe in next slides
CONFIG

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 24
 3.3) Menu “COMMAND”

MENU TREE Reset Operating Hours

Change operating
mode
COMMAND Global Alarm ACK
Main Global Alarm CLR
Date
Counter Time
DB Switch
Language

Change Value

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 25
 3.4) Menu “CONFIG”

MENU TREE

COMMAND

CONFIG
Computer
Main

Bay

Comm port

HMI
Main

Bay

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 26
 3.5) Menu “CONFIG COMPUTER” (1)

CONFIG
Computer Main

Bay

Comm
port

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 27
 3.5) Menu “CONFIG COMPUTER” (2)

Computer
IP Address (read only)
Main

Bay

Comm port

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 28
 3.5) Menu “CONFIG COMPUTER” (3)

IP Address (read only)

Computer
Main
List configured Bay
----------------------
Bay ----------------------
----------------------

Comm port

Internal SC
AR
DEVICES
BI
MV

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 29
 3.5) Menu “CONFIG COMPUTER” (4)

Internal SC SC delay
AR
DEVICES AR delays (cycles, reclaim time,..)
BI AR type (1P-3P-3P, 3P-3P,….)
MV

Devices list Time open

Time close

Devices list
Motion 00 filtering
Devices list Motion 11 filtering
persistence Close
persistence open
Hysteresis Toggling option
Deadband
Thresholds 1 to 6
GSE
L1 - 04-MICOM C264 HMI - Rev G - P 30
 3.5) Menu “CONFIG COMPUTER” (5)

Computer
Main

Bay

Comm List configured ports

port
PORT
Speed
parity
stop
…..

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 31
 3.6) Menu “HMI” (1)

MENU TREE

COMMAND

CONFIG
Computer

HMI
Main

Bay

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 32
 3.6) Menu “HMI” (2)

menu tree timeout

HMI
Main LCD lightness timeout
devices selection timeout
Bay Password
Password validity timeout

Bay list

Suppression - activation
devices name

GSE
L1 - 04-MICOM C264 HMI - Rev G - P 33
 www.alstom.com

GRID

GSE
SAM