Bolt Torque Cl4.6-Tight-Torq
Bolt Torque Cl4.6-Tight-Torq
Bolt Torque Cl4.6-Tight-Torq
(mm) (mm) (mm) (kN) (kN) (kN) Plain (Nm) Zinc (Nm) HDG (Nm)
M3 0.50 5.0 4.5 2.0 1.1 1.1 0.4 0.3 0.9
M4 0.70 8.8 7.8 3.5 2.0 1.9 1.0 0.7 2.2
M5 0.80 14.2 12.7 5.7 3.2 3.0 2.1 1.5 4.4
M6 1.00 20.1 17.9 8.0 4.5 4.3 3.5 2.5 7.4
M8 1.25 36.6 32.8 14.6 8.2 7.9 8.6 6.0 18.0
M10 1.50 58.0 52.3 23.2 13.1 12.6 17.0 11.9 35.6
M12 1.75 84.3 76.2 33.7 19.0 18.3 29.6 20.7 62.1
M14 2.00 115.0 104.7 46.0 25.9 25.1 47.1 33.0 98.9
M16 2.00 157.0 144.0 62.8 35.3 34.6 73.5 51.4 154.3
M18 2.50 192.0 175.0 76.8 43.2 42.0 101.1 70.8 212.3
M20 2.50 245.0 225.0 98.0 55.1 54.0 143.3 100.3 301.0
M22 2.50 303.0 281.0 121.2 68.2 67.4 195.0 136.5 409.5
M24 3.00 353.0 324.0 141.2 79.4 77.8 247.8 173.5 520.4
M27 3.00 459.0 427.0 183.6 103.3 102.5 362.5 253.7 761.2
M30 3.50 561.0 519.0 224.4 126.2 124.6 492.3 344.6 1033.8
M33 3.50 694.0 647.0 277.6 156.2 155.3 669.9 468.9 1406.8
M36 4.00 817.0 759.0 326.8 183.8 182.2 860.3 602.2 1806.6
M39 4.00 976.0 912.0 390.4 219.6 218.9 1113.4 779.4 2338.1
M42 4.50 1120.0 1050.0 448.0 252.0 252.0 1375.9 963.1 2889.4
M48 5.00 1470.0 1380.0 588.0 330.8 331.2 2063.9 1444.7 4334.1
M56 5.50 2030.0 1910.0 812.0 456.8 458.4 3325.1 2327.6 6982.8
M64 6.00 2680.0 2520.0 1072.0 603.0 604.8 5017.0 3511.9 10535.6
Note:
The tightening torque values given in the above table serve only as a guide. A k factor of 0.2 has been used which assumes
threads are plain finish, burr free with a light oil coating. It should be noted that these figures are based on the first tightening of
single assemblies in isolation.
v.1.4
Quality Fasteners Since 1935 August 2007