Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 221 views

    Aprilia Rsv4 Aprc v4mp 101 Eng

    Uploaded by

    Toni Cruz
    This document provides instructions for connecting Aprilia RSV4 and Tuono V4 motorcycles from model years 2015 through 2020 to AiM data logging devices. It details the connection points, appropriate cables and labels, and software configuration steps in Race Studio 3. The protocol receives over 40 channels of data including RPM, speed, temperatures, pressures, lean angles, and more.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aprilia Rsv4 Aprc v4mp 101 Eng

    Uploaded by

    Toni Cruz
    221 views7 pages
    This document provides instructions for connecting Aprilia RSV4 and Tuono V4 motorcycles from model years 2015 through 2020 to AiM data logging devices. It details the connection points, appropriate cables and labels, and software configuration steps in Race Studio 3. The protocol receives over 40 channels of data including RPM, speed, temperatures, pressures, lean angles, and more.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for connecting Aprilia RSV4 and Tuono V4 motorcycles from model years 2015 through 2020 to AiM data logging devices. It details the connection points, appropriate cables and labels, and software configuration steps in Race Studio 3. The protocol receives over 40 channels of data including RPM, speed, temperatures, pressures, lean angles, and more.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    221 views7 pages

    Aprilia Rsv4 Aprc v4mp 101 Eng

    Uploaded by

    Toni Cruz
    This document provides instructions for connecting Aprilia RSV4 and Tuono V4 motorcycles from model years 2015 through 2020 to AiM data logging devices. It details the connection points, appropriate cables and labels, and software configuration steps in Race Studio 3. The protocol receives over 40 channels of data including RPM, speed, temperatures, pressures, lean angles, and more.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    AiM Infotech

    Aprilia RSV4/Tuono RF/RR


    MY2015 - MY2017 - MY2019

    Release 1.01
    1
    Models and years
    This manual explains how to connect Aprilia RSV4 and Tuono V4 ECUs to AiM devices. Supported
    models and years are:

    • Aprilia RSV4 RR / RF MY 2015 2015 - 2016


    • Aprilia RSV4 RR / RF MY 2017 2017 - 2018
    • Aprilia RSV4 1100 MY 2019 2019 - 2020

    • Aprilia Tuono V4 RR / Factory MY 2015 2015 - 2016


    • Aprilia Tuono V4 RR / Factory MY 2017 2017 - 2018
    • Aprilia Tuono V4 RR / Factory MY 2019 2019 - 2020

    Warning: for these models/years AiM recommends not to remove the stock dash. Doing so will
    disable some of the bike’s functions or safety controls. AiM Tech srl will not be held responsible for
    any consequences that may result from the replacement of the original instrumentation cluster.

    1
    2
    Connection
    Aprilia RSV4/Tuono bikes feature a bus communication protocol based on CAN that can be reached
    through the V4-MP (Multimedia Platform – Bluedash) connector you find on the left side of the bike.
    Different connectors have been used by the manufacturer depending on model year.

    2.1
    RSV4 MY 2015 connection
    Aprilia RSV4/Tuono MY2015 are equipped with a 5 ways AMP Superseal connector dedicated to the
    V4-MP connection.

    Below is indicated its pinout (rear view) and connection table.

    5 ways connector pin Pin function Aprilia cable colour AiM cable label
    1 CAN High Orange CAN+
    2 CAN Low White/Black CAN-
    3 GND Green/Blue GND
    4 15 (12V switched) Red/Brown 9-15V power
    5 30 (12V unswitched) Not Used NC

    2
    2.2
    RSV4 MY2017 and MY2019 connection
    Aprilia RSV4/Tuono MY2017 MY2019 are equipped with an 8 ways Sumitomo connector dedicated to
    the V4-MP connection.

    Below is indicated its pinout and connection table.

    8 ways connector pin Pin function Aprilia cable colour AiM cable label
    1 15 (12V switched) Red/Brown 9-15V power
    2 GND Blue/Green GND
    3 CAN High Orange CAN+
    4 CAN Low White/Black CAN-
    5 Diagnostic K-line White/Blue Not Used
    6 NC NC
    7 NC NC
    8 NC NC

    3
    3
    Race Studio 3 configuration
    Before connecting the ECU to AiM device, set all functions using AiM Race Studio software. The
    parameters to select in the device configuration are:

    • ECU manufacturer: Aprilia


    • ECU Model: RSV4_APRC_V4MP

    After this first selection, enable/disable the 120 Ohm resistor and the “Silent” mode on CAN Bus as
    follows:

    4
    “Aprilia - RSV4_APRC_V4MP” protocol
    Channels received by AiM devices configured with "Aprilia - RSV4_APRC_V4MP" protocol are:

    CHANNEL NAME FUNCTION

    RSV4_RPM RPM
    RSV4_GEAR Engaged gear
    RSV4_BK_SPEED Bike speed
    RSV4_WH_SPD_F Front wheel speed
    RSV4_WH_SPD_R Rear wheel speed
    RSV4_ACC_LONG Longitudinal accelerometer
    RSV4_ACC_LAT Lateral accelerometer
    RSV4_ROLL_RATE Roll rate
    4
    RSV4_YAW_RATE Yaw rate
    RSV4_ENG_TEMP Engine coolant temperature
    RSV4_Brake_press Brake pressure
    RSV4 Baro Barometric pressure
    RSV4 MAP2 Target Manifold air pressure target bank 2
    RSV4 MAP1 Target Manifold air pressure target bank 1
    RSV4 MAP2 Manifold air pressure bank 2
    RSV4 MAP1 Manifold air pressure bank 1
    RSV4_Advance Ignition Advance
    V4MP_Lean_angle Lean angle
    RSV4_Pitch_angle Pitch angle
    RSV4_Roll_angle Roll angle
    RSV4 PFANGCOR 1 -
    RSV4 PFANGCOR 2 -
    V4MP_Throttle Throttle position
    RSV4_THRT_HAND Throttle handle
    RSV4_TPS1 Throttle position bank 1
    RSV4_TPS2 Throttle position bank 2
    V4MP_Torque_red Torque reduction
    V4MP_Inj_time Injection time
    RSV4_Odometer Odometer
    RSV4_V_BATT V battery
    RSV4_Pit_speed Pit limiter speed
    RSV4_ATC ATC – Aprilia Traction Control level
    RSV4_AWC AWC – Aprilia Wheel control
    RSV4_ALC ALC – Aprilia Launch control
    RSV4_AQS_on Quick shift on
    RSV4_Pit_on Pit limiter on
    RSV4_Pit_active Pit limiter activated
    V4MP_ATC_level ATC – Aprilia Traction Control level
    V4MP_Speed Speed
    V4MP_ABS_int ABS intervention

    5
    V4MP_Slip Tyre slip
    RSV4_Sistfas -
    RSV4_Cntlostsync Lost sync counter
    Cruise selector Cruise control selection key
    RSV4 ALC INT ALC – Aprilia Launch Control intervention
    RSV4_SEL_MAP Selected Map
    RSV4_WARNING Warning led
    RSV4_Urg_serv Urgent Service Lamp
    RSV4_MIL Malfunction Indicator Lamp
    RSV4_TC_INT Traction control intervention
    RSV4_FUEL_LOW Low fuel level
    Set confirm Selection key
    RSV4_Tipover Tip over sensor
    TC menu set butt Selection key
    RSV4_SIDESTAND Side stand led
    RSV4_ABS ABS
    Technical note: not all data channels outlined in the ECU template are validated for each
    manufacturer model or variant; some of the outlined channels are model and year specific, and
    therefore may not be applicable. Some models may need the V4-MP module to be plugged in, in
    order to stream the additional data.

    You might also like