Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Datasheet BES0045 267525 en PDF

    Uploaded by

    Gerardo Cruz Espinosa
    This document provides specifications for the Balluff BES M12MG-GSC30B-BV02 inductive sensor. The sensor has a sensing range of 3mm, operates at voltages between 10-36VDC, has an IP67 rating for dust and water protection, and features short circuit protection and protection against polarity reversal. It connects to systems with a 2m PVC cable and has a brass housing with nickel-free coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Datasheet BES0045 267525 en PDF

    Uploaded by

    Gerardo Cruz Espinosa
    18 views2 pages
    This document provides specifications for the Balluff BES M12MG-GSC30B-BV02 inductive sensor. The sensor has a sensing range of 3mm, operates at voltages between 10-36VDC, has an IP67 rating for dust and water protection, and features short circuit protection and protection against polarity reversal. It connects to systems with a 2m PVC cable and has a brass housing with nickel-free coating.

    Original Description:

    Original Title

    Datasheet_BES0045_267525_en.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the Balluff BES M12MG-GSC30B-BV02 inductive sensor. The sensor has a sensing range of 3mm, operates at voltages between 10-36VDC, has an IP67 rating for dust and water protection, and features short circuit protection and protection against polarity reversal. It connects to systems with a 2m PVC cable and has a brass housing with nickel-free coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views2 pages

    Datasheet BES0045 267525 en PDF

    Uploaded by

    Gerardo Cruz Espinosa
    This document provides specifications for the Balluff BES M12MG-GSC30B-BV02 inductive sensor. The sensor has a sensing range of 3mm, operates at voltages between 10-36VDC, has an IP67 rating for dust and water protection, and features short circuit protection and protection against polarity reversal. It connects to systems with a 2m PVC cable and has a brass housing with nickel-free coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Inductive Sensors

    BES M12MG-GSC30B-BV02
    Order Code: BES0045

    Basic features Electrical data


    Approval/Conformity cULus Load capacitance max. at Ue 1 µF
    CE Min. operating current Im 5 mA
    UKCA Operating voltage Ub 10...36 VDC
    WEEE
    Rated insulation voltage Ui 75 V DC
    Basic standard IEC 60947-5-2
    Rated operating current Ie 100 mA
    Trademark Global
    Rated operating voltage Ue DC 24 V
    Rated short circuit current 100 A
    Display/Operation Ready delay tv max. 50 ms

    Function indicator yes Residual current Ir max. 600 µA

    Power indicator no Ripple max. (% of Ue) 15 %


    Switching frequency 1300 Hz
    Utilization category DC -13
    Electrical connection
    Voltage drop static max. 4.2 V
    Cable diameter D 4.60 mm
    Cable length L 2m
    Environmental conditions
    Conductor cross-section 0.34 mm²
    Connection type Cable, 2.00 m, PVC Ambient temperature -25...70 °C

    Number of conductors 2 Contamination scale 3

    Polarity reversal protected yes EN 60068-2-27, Shock Half-sinus, 30 gn, 11 ms

    Protection against device mix-ups yes EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min

    Short-circuit protection yes IP rating IP67

    Functional safety
    MTTF (40 °C) 315 a

    Interface
    Switching output polarized normally open (NO)

    1/2
    Internet www.balluff.com eCl@ss 9.1: 27-27-01-01
    Subject to change without notice: 267525 ETIM 6.0: EC002714
    BES0045_0.78_2023-02-15
    Inductive Sensors
    BES M12MG-GSC30B-BV02
    Order Code: BES0045
    Material Range/Distance
    Housing material Brass, Nickel-free coated Assured operating distance Sa 2.4 mm
    Material jacket PVC Hysteresis H max. (% of Sr) 20.0 %
    Material sensing surface PA 12 Rated operating distance Sn 3 mm
    Real switching distance sr 3 mm

    Mechanical data Repeat accuracy max. (% of Sr) 5.0 %


    Switching distance marking ■■
    Dimension Ø 12 x 43 mm
    Temperature drift max. (% of Sr) 10 %
    Installation for flush mounting
    Tolerance Sr ±10 %
    Size M12x1
    Tightening torque 15 Nm

    Remarks
    The sensor is functional again after the overload has been eliminated.
    Specify maximum attainable switching frequency (not per IEC 60947-5-2)
    Flush: See installation instructions for inductive sensors with extended range 825357.
    For more information about MTTF and B10d see MTTF / B10d Certificate

    Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with
    no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.

    Wiring Diagrams

    2/2
    Internet www.balluff.com eCl@ss 9.1: 27-27-01-01
    Subject to change without notice: 267525 ETIM 6.0: EC002714
    BES0045_0.78_2023-02-15

    You might also like