Pressfit 316 Stainless Steel Pipe System

PRESSFIT 316 STAINLESS STEEL PIPE SYSTEM
18.01
*
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS
Stainless Steel Pipe System

PRESSFIT 316 The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining "/15mm, "/ 20mm, 1"/25mm, 1"/40mm, and 2"/50mm stainless steel pipe. Vic-Press 316 products and Type 316/316L stainless steel pipe are designed for pressure service to 300 psi/2065 kPa or ANSI Class 150 (except steam, according to standard temperature /pressure charts, below) for water, oil, noncombustible gaseous and general chemical services. Refer to o-ring selection data for the intended service. The system requires no flame as with welding; no cutting oil, chips or preparation time as with threading or flanging. Stainless steel pipe is cut to size, inserted into the coupling and the coupling pressed onto the pipe and fitting in seconds. The system is approved by the American Bureau of Shipping (ABS) for all water services including fire protection. It meets the hanging requirements of ASME B31.1, B31.3 and B31.9. Only approved Pressfit 316 pipe must be used with Pressfit 316 stainless steel products. Type 316/316L Pressfit couplings, fittings and approved pipe are UL classified in accordance with ANSI/NSF 61 for cold +86F/+30C and hot +180F/+82C potable water service. For product installation instructions, refer to Pressfit Product Assembly Instructions (I-500) and the appropriate Tool Operating and Maintenance Instructions Manual. *Style 500 Series Pressfit products are FM Approved as noted below when installed on Victaulic Pressfit 304 Schedule 5 stainless steel pipe only for services up to 175 psi/1205 kPa. See Submittal Publication 18.02 for products Approved for use with Pressfit 304 Schedule 5 stainless steel pipe.
PERFORMANCE
300 2065 275 1920
248 psi 1730 kPa
232 psi 1620 kPa
PRESSURE (psi/kPa)
230 1600 200 1400
215 psi 1500 kPa
202 psi 1410 kPa GRADE T Stainless Steel 316 Press t System ANSI Class 150 for 316 Stainless Steel* ANSI Class 150 for 316L Stainless Steel* * Data from ANSI B16.5 100F 38C
190 psi 1320 kPa
175 psi 1280 kPa GRADE O
100 690
GRADE E
180F 82C
200F 93C
230F 110C
300F 149C
TEMPERATURE (F/C)
JOB/OWNER
CONTRACTOR
ENGINEER
System No. __________________________ Location ____________________________
Submitted By ________________________ Date ________________________________
Spec Sect ____________ Para __________ Approved ___________________________ Date ________________________________
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 2011 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
REV_J
18.01_1
18.01

PRESSFIT 316
MATERIAL SPECIFICATIONS
Housing Body: Precision cold drawn Type 316/316L stainless steel. Threaded Outlets: Stainless steel bar conforming to ASTM A-276, Grade 316L, or stainless steel pipe conforming to ASTM A-312, Grade 316L. Plain End or Grooved End Products: Stainless steel pipe conforming to ASTM A-312, Grade 316L. Flanges for Style 575: ANSI Class 150, Grade 316L. O-Ring Seals: (Specify choice on order) O-ring seals shall be molded of synthetic rubber. Grade E EPDM EPDM (Green color code). Temperature range 30F to +230F/34C to +110C. Recommended for hot water service within the specified temperature range plus a variety of dilute acids, compressed air and many chemical services. UL classified in accordance with ANSI/NSF 61 for cold +86F/+30C and hot +180F/+82C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. NOT RECOMMENDED FOR STEAM SERVICES. Grade T nitrile Nitrile (Orange color code). Temperature range 20F to +180F/29C to +82C. Recommended for petroleum products, vegetable and mineral oils within the specified temperature range; except hot, dry air over +140F/+60C and water over +150F/+66C. NOT RECOMMENDED FOR HOT WATER SERVICES. Grade O fluoroelastomer Fluoroelastomer (Blue color code). Temperature range +20F to +300F/7C to +149C. Recommended for many oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons. * Services listed are General Service Recommendations only. It should be noted that there are services for which these o-rings are not recommended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific o-ring service recommendations and for a listing of services which are not recommended.
WARNING
WARNING
Pressfit products must only be used on services compatible with o-ring and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations.
www.victaulic.com
18.01_2
REV_J
18.01

PRESSFIT 316
PRESSFIT COMPONENTS 1 2 3 4 5 6 O-RING O-RING POCKET HOUSING PIPE STOP INSERTION MARK TOOL INDENT
Unpressed
1 2 4
Pressed
6 1 5
Exaggerated for clarity
FRICTION LOSS
Size Nom. Size Inches mm Actual Out. Dia. Inches mm
Flow Rate
Friction Loss (psi Per Ft./ kPa/m) C = 120 Schedule 10 psi/Ft. kPa m Higher Schedule 40 psi/Ft. kPa m Higher
GPM/LPM
Sch. 5
1/2 15 3/4 20 1 25 11/2 40 2 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
15 56.8 25 94.6 40 151.4 120 454.2 150 567.8
0.5000 11.3 0.3713 8.4 0.2584 5.9 0.2800 6.3 0.1330 3.0
0.6430 14.6 0.4510 10.2 0.3773 8.5 0.3592 8.1 0.1616 3.7
22% 21% 46% 28% 22%
0.9510 21.5 0.6351 14.4 0.4691 10.6 0.4445 10.1 0.1989 4.5
90% 71% 82% 59% 50%
FLOW AREA
Size Nom. Size Inches mm Actual Out. Dia. Inches mm Available Flow Area (Sq. Inches/mm2) Schedule 10 Sch. 5 Flow Area Less Schedule 40 Flow Area Less
I.D./AREA
1/2 15 3/4 20 1 25 11/2 40
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
0.396 255.4 0.655 422.5 1.103 711.4 2.461 1587.3 3.960 2554.2
0.357 230.3 0.614 396.0 0.945 609.5 2.222 1433.2 3.650 2354.3
10% 8% 14% 10% 8%
0.304 196.1 0.533 343.8 0.864 557.3 2.036 1313.2 3.360 2167.2
23% 20% 22% 17% 15%
Schedule 5 stainless steel pipe provides larger flow area and greater capacity frequently permitting pipe downsizing.
2 50
www.victaulic.com
REV_J
18.01_3
18.01

PRESSFIT 316
Dimensional Information
Products in the Pressfit 304/316 Systems have unique centerto-end or end-to-end dimensions which incorporate specific, uniform "takeout" dimensions for easy fabrication calculations. Use of threaded products employing special features such as probes, escutcheon cups, etc., should be checked to be certain the thread standard and length of insertion are compatible with fitting dimensions. Failure to verify dimensional suitability in advance may result in difficulties in assembly
P (3) END TYPE CODE P F M T L G W = Press t = Female Pipe Thread = Male Pipe Thread = Plain End = Flanged = Grooved = Welded
Standard Coupling
STYLE 507 (P P)
E to E U
STYLE 597 Size Nominal Size Inches mm Actual Outside Diameter Inches mm Dimensions Inches/mm Approx. Weight Each
E to E
U Takeout
Lbs. kg
1/2 15 3/4* 20 14* 25 11/24* 40 24* 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
2.00 51 2.17 55 2.44 62 3.15 80 3.94 100
0.35 9 0.28 7 0.39 10 0.32 8 0.33 8
0.1 0.1 0.2 0.1 0.2 0.1 0.5 0.2 0.7 0.3
P (1)
P (2)
*FM Approved for services up to 175 psi/1205 kPa.
Elbows
STYLE 570 90 Elbow (P P) STYLE 568 Short Tangent 90 Elbow (P P) STYLE 571 45 Elbow (P P)
C to PE U C to PE U
C U to PE
STYLE 570 Size Nominal Size Inches mm Actual Outside Diameter Inches mm C to PE Inches mm Style 570 90 Elbow U Takeout Inches mm Approx. Weight Each Lbs. kg C to PE Inches mm
STYLE 568 Style 568 Short Tangent 90 Elbow U Takeout Inches mm Approx. Weight Each Lbs. kg C to PE Inches mm
STYLE 571 Style 571 45 Elbow U Takeout Inches mm Approx. Weight Each Lbs. kg
1/2 15 3/4* 20 1* 25 11/2* 40 2* 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
2.67 68 3.43 87 4.33 110 6.73 171 8.19 208
1.88 48 2.48 63 3.31 84 5.32 135 6.38 162
0.3 0.1 0.4 0.2 0.6 0.3 1.4 0.6 2.3 1.0
2.83 72 3.36 85 4.60 117 5.71 145
1.88 48 2.34 59 3.19 81 3.90 99
0.3 0.2 0.5 0.2 1.0 0.5 1.5 0.7
1.65 42 2.44 62 3.11 79 5.00 127 6.02 153
0.82 21 1.50 38 2.09 53 3.59 91 4.22 107
0.2 0.1 0.3 0.1 0.5 0.2 1.3 0.6 2.0 0.9
www.victaulic.com
18.01_4
REV_J
18.01

PRESSFIT 316
Tee
STYLE 572 (P P P)
C to EOB U 2 U1
Tee with Threaded Branch

STYLE 578 (P P F)
C * to U EOB 2 U1
C to PE
C to PE
Approx. Wgt. Each
STYLE 572 Size Nominal Size Inches mm Actual Outside Dia. Inches mm Dimensions Inches/mm Size Nominal Size Inches mm Dimensions Inches/mm
STYLE 578 Approx. Wgt. Each
C to PE
U1
C to EOB
U2
Lbs. kg
C to PE
U1
C to EOB
U2
Lbs. kg
1/2 15 3/4* 20 1* 25 11/2* 40 2* 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
1.40 36 1.89 48 2.11 54 2.76 70 3.39 86
1.04 26 1.89 48 2.17 55 2.69 68 3.17 81
1.60 41 1.89 48 2.15 55 2.80 71 3.62 92
0.72 18 0.95 24 1.13 29 1.39 35 1.81 46
0.2 0.1 0.3 0.1 0.4 0.2 0.9 0.4 1.4 0.6
1/2 15 3/4 20
1/2 15 3/4 20
1/2 15 1/2 15 3/4* 20
1.50 38 1.89 48 1.89 48 2.11 54 2.11 54 2.11 54 2.76 70 2.76 70 2.76 70 3.39 86 3.39 86 3.39 86
1.35 34 1.89 48 1.89 48 2.17 55 2.17 55 2.17 55 2.69 68 2.69 68 2.69 68 3.16 80 3.16 80 3.16 80
1.50 38 1.64 42 1.71 43 1.78 45 1.85 47 2.02 51 2.07 53 2.14 54 2.31 59 2.31 59 2.38 60 2.55 65
0.97 25 1.11 28 1.16 29 1.25 32 1.30 33 1.34 34 1.54 39 1.59 40 1.63 40 1.78 45 1.83 46 1.87 48
0.2 0.1 0.3 0.2 0.4 0.2 0.4 0.2 0.5 0.2 0.6 0.3 0.8 0.4 0.9 0.4 0.9 0.4 1.2 0.5 1.3 0.6 1.3 0.6
1 25
1 25
1/2 15 3/4* 20 1* 25 1/2 15 3/4* 20

11/2 40 11/2 40
Slip Coupling
STYLE 508 (P P P)
I min.
E to E
I min. 2 50 2 50
1* 25 1/2 15 3/4* 20 1* 25
STYLE 508 Size Nominal Size Inches mm Actual Outside Dia. Inches mm Dimensions Inches/mm Approx. Wgt. Each
E to E
I Min. Tube Insert
Lbs. kg
1/2 15 3/4* 20 1* 25 11/2* 40 2* 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
3.31 84 3.54 90 3.94 100 4.72 120 5.51 140
1.00 25 1.00 25 1.00 25 1.00 25 1.25 32
0.1 0.1 0.2 0.1 0.3 0.1 0.6 0.3 0.9 0.4
www.victaulic.com
REV_J
18.01_5
18.01

PRESSFIT 316
Tee with Reducing Branch

STYLE 573 (P P P)
C to U EOB 2 U1
Male Threaded Adapter

STYLE 576 (P M)
IL E to E U *
C to PE
STYLE 573 Size Nominal Size Inches mm Dimensions Inches/mm Approx. Weight Each Size Nominal Size Inches mm Dimensions Inches/mm
STYLE 576 Approx. Weight Each
C to PE
U1
C to EOB
U2
Lbs. kg
E to E
U Takeout
IL Insert. Length
Lbs. kg
3/4 20 1 25
3/4 20 1 25
1/2 15 1/2* 15 3/4 20
1.90 48 2.10 53 2.11 54 2.76 70 2.76 70 2.76 70 3.39 86 3.39 86 3.39 86 3.39 86
1.91 48 2.15 55 2.17 55 2.69 68 2.69 68 2.69 68 3.17 81 3.17 81 3.17 81 3.17 81
2.10 53 2.30 58 2.03 52 2.60 66 2.32 59 2.44 62 2.80 71 2.56 65 2.68 68 3.03 77
1.27 32 1.47 37 1.09 28 1.77 45 1.68 43 1.42 36 1.97 50 1.62 41 1.66 42 1.62 41
0.3 0.1 0.3 0.1 0.4 0.2 0.6 0.3 0.7 0.3 0.8 0.4 1.2 0.5 1.3 0.6 1.1 0.5 1.3 0.6
1/2 15 3/4 20
1/2 15 1/2 15 3/4* 20 1* 25 3/4* 20 1* 25
3.68 93 3.22 82 3.72 94 3.22 82 3.34 85 4.02 102 3.69 94 4.40 112 5.03 128 5.03 128
2.32 59 1.75 44 2.22 56 1.60 41 1.77 45 2.32 59 1.73 44 2.27 58 2.46 62 2.46 62
0.83 21 0.95 24 0.95 24 0.95 24 1.02 26 1.02 26 1.42 36 1.42 36 1.81 46 1.81 46
0.2 0.1 0.3 0.1 0.3 0.1 0.4 0.2 0.4 0.1 0.4 0.2 0.6 0.3 0.7 0.3 1.0 0.5 1.0 0.5
11/2 40
11/2 40
1/2 15 3/4* 20 1* 25
1 25
2 50
2 50
1/2 15 3/4* 20 1* 25 11/2* 40
11/2 40
3/4* 20 11/2* 40
2 50 2 50
2* 50 2* 50
www.victaulic.com
18.01_6
REV_J
18.01

PRESSFIT 316
Female Threaded Adapter

STYLE 579 (P F)
E to E IL U *
Grooved End Union

STYLE 548
STYLE 579 Size Nominal Size Inches mm Dimensions Inches/mm Approx. Weight Each
Request Request Request Joints Request
Publication 06.02 for Style 77 Flexible Joint Publication 06.04 for Style 07 Rigid Joint Publication 17.03/17.14 for Style 77S/475 Flexible Publication 17.25 for Style 489 Rigid Joints
E to E
U Takeout
IL Insert. Length
Lbs. kg
1/2 15 3/4 20
1/2 15 1/2 15 3/4* 20
2.15 55 2.20 56 2.20 56 2.30 58 2.30 58 2.40 61 2.96 75 2.96 75 3.75 95 3.75 95
0.79 20 0.71 18 0.79 20 0.75 19 0.73 19 0.75 19 0.92 23 0.87 22 1.27 32 1.27 32
0.83 21 0.95 24 0.95 24 1.02 26 1.02 26 1.02 26 1.42 36 1.42 36 1.81 46 1.81 46
0.2 0.1 0.2 0.1 0.2 0.1 0.4 0.2 0.3 0.1 0.4 0.2 0.8 0.4 0.8 0.4 1.1 0.5 1.0 0.5
Insertion Mark
1 25
1/2 15 3/4* 20 1* 25
tyle 548 grooved end union can be formed with two Style S 577 transition nipples and a variety of grooved end couplings with varied gaskets to meet service requirements tandard ductile iron couplings request Style 77 for flexible S joints or Style 07 for rigid joints here external corrosion is a concern request Style 77S/475 W for flexible joints or Style 489 for rigid joints
11/2 40
1* 25 11/2* 40
Flange Adapter
STYLE 575 (P L)
2 50
11/2* 40 2* 50
W X Y
Threaded Union
STYLE 585 (P P)
E to E U
Size Nominal Size Inches mm Actual Out. Dia. Inches mm Dimensions Inches/mm
STYLE 575 Approx. Weight Each
U Takeout
Lbs. kg
1/2 15 3/4* 20 1* 25 11/2* 40 2* 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
2.39 61 2.27 58 2.27 58 2.07 53 1.80 46
1.38 35 1.69 43 2.00 51 2.88 73 3.62 92
2.38 60 2.75 70 3.12 79 3.88 99 4.75 121
3.50 89 3.88 99 4.25 108 5.00 127 6.00 152
3.22 82 3.22 82 3.29 84 3.48 88 3.60 92
2.3 1.1 1.7 0.8 2.2 1.0 3.6 1.6 5.4 2.4
E to E
U Takeout
Lbs. kg
1/2 15 3/4* 20 1* 25 11/2* 40 2* 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
7.02 178 7.14 181 7.26 184 8.44 214 8.38 213
5.27 134 5.14 131 5.26 134 5.44 138 4.67 119
2.80 1.3 3.50 1.6 3.80 1.7 5.40 2.4 6.10 2.8
www.victaulic.com
REV_J
18.01_7
18.01

PRESSFIT 316
Van Stone Flange Adapter

STYLE 566 (P L)
E to E
Reducer Insert
STYLE 583 (T P)
E to E U IL
STYLE 566 Size Nominal Size Inches mm Actual Outside Diameter Inches mm Dimensions E to E Inches mm Approx. Weight Each Size Nominal Size Inches mm Dimensions Inches/mm
STYLE 583 Approx. Weight Each IL Insertion Length
Lbs. kg
E to E
U Takeout
Lbs. kg
1/2 15 3/4* 20 1* 25 11/2* 40 2* 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
3.12 79 3.17 81 3.28 83 3.64 93 4.73 120
3.00 1.4 3.30 1.5 3.60 1.6 5.00 2.3 5.90 2.7
1 25 2 50
3/4* 20 11/2* 40
2.95 75 4.33 110
0.98 25 1.11 28
0.95 24 1.42 36
0.2 0.1 0.6 0.3
Concentric Reducer
STYLE 574 (T T)
L1
E to E
L2

Insertion Mark
Transition Nipple
STYLE 577 (G T)
L1 E to E
STYLE 574 Size Nominal Size Inches mm Dimensions Inches/mm Approx. Weight Each
E to E
L1 Minimum
L2 Minimum
Lbs. kg
Insertion Mark
3/4 20 1 25
1/2 15 1/2 15 3/4* 20
3.50 89 3.56 90 3.56 90 4.25 108 4.25 108 4.25 108 5.00 127 5.00 127 5.00 127 5.00 127
1.00 25 1.03 26 1.03 26 1.44 37 1.44 37 1.44 37 1.81 46 1.81 46 1.81 46 1.81 46
0.88 22 0.88 22 1.00 25 0.88 22 1.00 25 1.03 26 0.88 22 1.00 25 1.03 26 1.44 37
0.2 0.1 0.2 0.1 0.2 0.1 0.3 0.1 0.4 0.2 0.4 0.2 0.6 0.3 0.6 0.3 0.6 0.3 0.7 0.3
11/2 40
1/2 15 3/4* 20 1* 25
E to E
L1 Minimum
Lbs. kg
3/4* 20 1* 25 11/2* 40 2* 50
1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
4.00 102 4.00 102 4.00 102 4.00 102
1.00 25 1.00 25 1.50 38 1.88 48
0.2 0.1 0.3 0.1 0.4 0.2 0.5 0.2 2 50
1/2 15 3/4* 20 1* 25 1 1/2* 40
www.victaulic.com
18.01_8
REV_J
18.01

PRESSFIT 316
Pressfit 316 Type 316 Stainless Steel Ball Valve

SERIES 569
Series 569 Pressfit System Ball Valves feature full stainless steel body and trim, rated for service up to 300 psi/2065 kPa with Pressfit ends and up to 400 psi/2750 kPa with grooved ends, depending upon the joining coupling. The valves are constructed of rugged Type 316 (CF8M) stainless steel with PTFE seats. The valves feature a blow-out proof stem and self-adjusting floating ball which provides uniform sealing. The full port design minimizes pressure drop for maximum flow efficiency. The three-piece swing-out design permits easy in-line maintenance. Repair Kits Repair kits for replacing the ball and seals are available. Contact Victaulic for details.
Size Nominal Size Inches mm Actual Outside Diameter Inches mm Dimensions Inches/mm Approx. Weight Each
A End to End
Lbs. kg
1/2* 15 3/4 20 1 25 11/2 40 2 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
7.98 200.0 8.57 217.2 8.89 225.8 11.20 284.5 12.52 318.0
2.36 59.9 2.52 64.0 2.80 71.1 3.39 86.1 3.74 95.0
0.88 22.4 1.00 25.4 1.00 25.4 1.50 38.1 1.88 47.8
5.12 130.0 5.12 130.0 6.50 165.1 7.48 190.0 7.48 190.0
1.5 0.7 2.4 1.1 3.6 1.6 6.9 3.1 9.5 4.3
For dimensions and weights with gear operator contact Victaulic. *1/2"/15 mm only available in plain end x plain end (T x T).
E B C
DO NOT TRIM DO NOT TRIM
E B
A
PLAIN END X PLAIN END
A
GROOVED X GROOVED
E B C
DO NOT TRIM
A
PLAIN END X GROOVED
www.victaulic.com
REV_J
18.01_9
18.01

PRESSFIT 316
SERIES 569 MATERIAL SPECIFICATIONS
Body: Stainless steel, CF8M Ball: Stainless steel, CF8M Stem: Stainless steel, Type 316 Seats: (PTFE) Polytetrafluoroethylene Handle: Stainless steel, Type 304 Stem Nut: Stainless steel, Type 304 Stem Washer: Stainless steel, Type 304 Stem Packing and Thrust Washer: Tetrafluoroethylene Bolt/Nut/Washer: Stainless steel, Type 304 Cap: Stainless steel, CF8M Extended Ends: Schedule 5S Stainless steel, Type 316 Specify end style: Plain End for Pressfit (T x T) Grooved End (G x G) Plain End x Grooved End (T x G)
WARNING
WARNING
Pressfit products must be used only on services compatible with o-ring and fitting material. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations.
SERIES 569 REPAIR KITS
Repair kits and replacement parts are available for the Series 569 valve. The Repair Kit consists of two seats, two gaskets, one stem seal and one thrust washer, all made of PTFE. A replacement ball of CF8M stainless steel is also available. For replacement stem information, contact Victaulic.
Size Nominal Size Inches mm Actual Out. Dia. Inches mm Repair Kit Replacement Ball
Part No.
Part No.
1/2 15 3/4 20 1 25 11/2 40 2 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
K-004-569-001 K-006-569-001 K-010-569-001 K-014-569-001 K-020-569-001
K-004-569-000 K-006-569-000 K-010-569-000 K-014-569-000 K-020-569-000
www.victaulic.com
18.01_10
REV_J
18.01

PRESSFIT 316
APPROVED PIPE
For stainless steel pipe approved for use with the Pressfit 316 System, contact Victaulic or your nearest Pressfit Stainless Steel distributor. Approved pipe carries the label, Pressfit 316 pipe certified for use with Pressfit 316 products. For product installation instructions, refer to Pressfit Product Assembly Instructions (I-500) and the appropriate Tool Operating and Maintenance Instructions Manual.
Aprx. Pipe* Weight Per Ft. Wall Thickness Lbs. kg
*Pipe Inches/mm Nominal Size Actual Outside Dia.
1/2 15 3/4 20 1 25
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
0.065 1.7 0.065 1.7 0.065 1.7 0.065 1.7 0.065 1.7
0.6 0.3 0.7 0.3
PIPE PREPARATION TOOLS
11/2 40 2 50
24.01
1.3 0.6 1.6 0.7
0.9 0.4
Pipe Preparation Tool Specicationslengths (RML) (17 24 ft.) which nominally measure 21 ft. Order *Pipe is supplied in random mill
quantities will be accepted only in 21 ft. random length increments, subject to industry standard 10% tolerance. Minimum footage requirements must be specified on the order when required.
Presst Tools
PFT505
The Presst System requires a Presst tool designed for securing Presst products onto pipe Jaws are available separately for rental (with rental tool) or purchase Presst tool is designed for industrial and trade use only Capacity: 2"/15 50 mm IPS Schedule 5 steel and stainless steel pipe Power Requirements: 110 volt, 60 cycle, 6.5 amp
PFT505
Accessories: Pressing jaws in "/15 mm, "/20 mm, 1"/25 mm, 1 "/40 mm and 2"/50 mm sizes Note: PFT505 and PFT509 components are not interchangeable
PFT509
The Presst System requires a Presst tool designed for securing Presst products onto pipe Tool packages include the actual pressing tool, two (2) batteries and a charger, carrying case, and "/15 mm, "/20 mm, 1"/25 mm, and 1 "/40 mm press jaws Jaws are included with every tool purchase Presst tool is designed for industrial and trade use only
PFT509
Presst tool is battery powered and a 12V battery charger is included with tool purchase Capacity: 1" and 1 "/15 25 mm and 40 mm IPS Schedule 5 steel and stainless steel pipe Power Requirements: 110 volt/60 cycle/6.5 amp Note: PFT505 and PFT509 components are not interchangeable
www.victaulic.com
REV_J
18.01_11
18.01

PRESSFIT 316
CAUTION
CAUTION
It is the responsibility of designers of piping systems to verify the suitability of Schedule 5 Type 316 stainless steel pipe for use with the intended fluid media. The fluids chemical composition, pH level, operating temperature, chloride level, oxygen level and flow rate and their effect on AISI Type 316 stainless steel must be evaluated by the material specifier to confirm system life will be adequate for the intended service. Failure to do so may cause serious personal injury or property damage.
PIPE SUPPORT
Piping joined with Type 316 Pressfit System products, like all other piping systems, requires support to carry the weight of pipes and equipment. As for other methods of joining pipes, the support or hanging method must be such as to eliminate undue stresses on joints, piping and other components. Additionally, the method of support must be such as to allow movement of the pipes where required and to provide drainage, etc., as may be specified by the designer. The maximum hanger spacing corresponds to ASME B31.1, B31.3 or B31.9 as noted and should be used in conjunction with Victaulic Pressfit System products on Approved Schedule 5 stainless steel pipe.
Pipe Size Nominal Size Inches mm Actual Out. Dia. Inches mm Water Service B31.1 B31.3 B31.9 B31.1 Suggested Max. Span Between Supports - Feet/meters Gas/Air Service B31.3 B31.9
1/2 15 3/4 20 1 25 11/2 40 2 50
0.840 21.3 1.050 26.7 1.315 33.7 1.900 48.3 2.375 60.3
6 1.8 7 2.1 7 2.1 7 2.1 10 3.1
6 1.8 7 2.1 7 2.1 7 2.1 10 3.1
7 2.1 8 2.4 9 2.7 12 3.7 13 4.0
8 2.4 9 2.7 9 2.7 9 2.7 13 4.0
8 2.4 9 2.7 9 2.7 9 2.7 13 4.0
7 2.1 8 2.4 9 2.7 13 4.0 15 4.6
WARRANTY
Refer to the Warranty section of the current Price List or contact Victaulic for details.
NOTE
This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.
For complete contact information, visit www.victaulic.com

18.01 1546 REV J UPDATED 5/2011 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 2011 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
18.01

Pressfit 316 Stainless Steel Pipe System

Uploaded by

Copyright:

Available Formats

Pressfit 316 Stainless Steel Pipe System

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pressfit 316 Stainless Steel Pipe System

Uploaded by

Copyright:

Available Formats

PRESSFIT 316 STAINLESS STEEL PIPE SYSTEM

Stainless Steel Pipe System

300 2065 275 1920

248 psi 1730 kPa

232 psi 1620 kPa

230 1600 200 1400

215 psi 1500 kPa

190 psi 1320 kPa

175 psi 1280 kPa GRADE O

System No. __________________________ Location ____________________________

Submitted By ________________________ Date ________________________________

Spec Sect ____________ Para __________ Approved ___________________________ Date ________________________________