Nothing Special   »   [go: up one dir, main page]

Xcfbrochu

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

HYDRAcap™ series

by NX Filtration
Hollow fiber ultrafiltration membranes
Clean water
for all
NX Filtration produces advanced
hollow fiber membrane modules
for nanofiltration, ultrafiltration
and microfiltration applications.
As part of our ultrafiltration of-
fering, we supply the HYDRAcap™
series for various applications.

HYDRAcap™ is used to treat surface


water, ground water, seawater and
wastewaters as either primary treat-
ment or as pretreatment to spiral
wound reverse osmosis (RO) and
nanofiltration (NF). Compared to con-
ventional pretreatment, HYDRAcap™
allows for higher fluxes for RO and
NF systems while extending intervals
between cleanings. In some cases, it
replaces conventional pretreatment
for potable applications, ground water
recharging and water recycling.
Our HYDRAcap™ series

HYDRAcap™ Module 40 60 60+ 60E 60E+ 40LD 60LD

Membrane specifications

Surface area [m2] 30 46 56 46 56 19 30


Inner diameter [mm] 0.8 1.2
Material Modified PES
Pore size 20 nm

Typical operating ranges

Flux [lmh] 59-145


Maximum feed turbidity [NTU] 100 200
Inside - Out
Filtration mode
Dead-end and/or Cross-flow

Performances

Permeate flow [m3/h] 1.8 – 4.3 2.7 - 6.8 3.3 – 8.1 2.7 – 6.8 3.3 – 8.1 1.1 – 2.8 1.8 – 4.3
Permeate turbidity ≤ 0.07 NTU
Bacteria removal ≥ 5 log
Virus removal ≥ 4 log

Al Hamriyah Sea Water


RO Plant, U.A.E.

Start-up date: May 2014

24 racks of 120 HYDRAcap™60 modules (2,880


in total) are producing 61 mgd (228 Ml/d) from
an open intake sea water. UF membranes didn’t
receive CIP until 2017 and are delivering directly
in line high quality permeate water to 8 trains of
SWC5 membranes.
Operations of HYDRAcap™
The filtration mode of HYDRAcap™
modules is inside-out: feed water flows
from the inside of the fibers to the
outside. For backwashing, permeate
is forced through the fibers in reverse Our HYDRAcap™ is a robust and low
fouling hydrophilic polyethersulfone
flow, from the outside to the inside,
membrane, tolerant to chlorine,
such that accumulated solids are peroxide and other oxidants
removed from the fibers. resistant to pH extremes. It exhibits
5 log (99.999%) removal for
bacteria, giardia, cryptosporidium
and 4 log removal for viruses.
Turbidity is reduced to < 0.07 NTU
and HYDRAcap™ modules benefit
from low pressure operation, either
in dead-end mode or cross-flow.

Benefits

Low Chlorine
pressure resistant

Low 5 Log
fouling removal
Advantages of
hollow fiber technology
Better permeate quality
Significantly better permeate quality
when compared to conventional pre-
treatment, exhibiting 100% removal
Sustainability
of colloidal material. Permeate qual-
ity is stable regardless of feedwater Considerably reduces the use of
variation. predetermined chemicals. Backwash
disposal is less problematic due to
lower wastewater volumes.

Improved RO performance
Increased efficiency of RO mem-
brane system design and operation,
contributing to reduced capital and
operational costs. Maximizes RO
performance by allowing elements
to operate longer with less cleaning.
NX Filtration,
your membrane partner
NX Filtration offers a wide range of advanced
hollow fiber membrane modules for nanofiltration,
ultrafiltration and microfiltration applications.

We have developed a worldwide unique


nanofiltration concept, designed to remove organics
from water in one single step: energy efficient,
without extensive pretreatment and without the use
of chemicals.

Our ultrafiltration membranes are the best


choice for the removal of small particles, bacteria
and viruses from water. The HYDRAcap™ series
is complementary to our existing range of
ultrafiltration membrane modules.

Our microfiltration membranes are ideally suited for


Pilots
high quality – low energy clarification of beverages, The complete range of our membranes
such as wine and beer, as well as for dairy and is also available in laboratory and pilot
pharmaceutical applications. scale modules that can be used in pilot
installations, ranging from lab-scale
to full-scale pilots. This provides the
opportunity to perform a quick filtration
and fouling test and select the best
membranes for your application.

Drinking water certifications

Josink Esweg 44 +31 (0)850 479 900


7545 PN Enschede info@nxfiltration.com
The Netherlands www.nxfiltration.com

You might also like