10 MV 1
10 MV 1
10 MV 1
APPLICATION
» Conveyors
» Metal working machines
» Machines for agriculture
» Road building machines
» Mining machinery
» Food industries
» Special vehicles
» Plastic and rubber machinery etc.
CONTENTS OPTIONS
Specification data ......................................... 44 » Model- Disc valve, roll-gerotor
Function diagrams ................................. 45÷47 » Flange and wheel mount
Permissible shaft loads .................................. 47 » Short motor
Dimensions and mounting ............................ 48 » Tacho connection
Dimensions and mounting- MVS ................... 49
» Speed sensoring
Dimensions and mounting- MVV ................... 50
» Side ports
Internal Spline data ...................................... 51
» Shafts- straight, splined and tapered
Tacho connection ......................................... 51
Shaft extensions ........................................... 52 » Metric and BSPP ports
Order code ................................................. 52 » Other special features
GENERAL
3
Displacement, [cm /rev.] 314,5÷801,8
Max. Speed, [RPM] 250÷510
Max. Torque, [daNm] 92÷188
Max. Output, [kW] 42,5÷53,5
Max. Pressure Drop, [bar] 160÷200
Max. Oil Flow, [l/min] 160÷200
Min. Speed, [RPM] 5÷10
Permissible Shaft Loads, [daN] Pa=1500
Pressure fluid Mineral based- HLP(DIN 51524) or HM(ISO 6743/4)
O
Temperature range, [ C] -30÷90
2
Optimal Viscosity range, [mm /s] 20÷75
Filtration ISO code 20/16 (Min. recommended fluid filtration of 25 micron)
bar
16
14
Pressure Oil flow in 12
Viscosity
drop drain line
(mm 2/s) 10
(bar) (l/min)
8
20 3
140 6
35 2
4
20 6
210 2
35 4
0
0 20 40 60 80 100 120 140 160 180 200Q l/min
43
MV
MOTORS
SPECIFICATION DATA
MV MV MV MV MV
Type 315 400 500 630 800
3
Displacement [cm /rev.] 314.5 400,9 499,6 629,1 801,8
Max. Speed, cont. 510 500 400 315 250
[RPM] Int.* 630 600 480 380 300
Max. Torque cont. 92 118 146 166 188
[daNm] Int.* 111 141 176 194 211
peak** 129 164 205 221 247
Max. Output cont. 42,5 53,5 53,5 48 42,5
[kW] int.* 51 64 64 56 48
Max. Pressure Drop cont. 200 200 200 180 160
[bar] Int.* 240 240 240 210 180
peak** 280 280 280 240 210
Max. Oil Flow cont. 160 200 200 200 200
[l/min] Int.* 200 240 240 240 240
Max. Inlet Pressure cont. 210 210 210 210 210
[bar] Int.* 250 250 250 250 250
peak** 300 300 300 300 300
Max. Return Pressure cont. 0-100 RPM 60 60 60 60 60
without Drain Line or cont. 100-300 RPM 30 30 30 30 30
Max. Pressure cont. >300 RPM 20 20 20 20 20
in Drain Line , [bar] Int.* 0-max. RPM 75 75 75 75 75
Max. Return Pressure cont. 140 140 140 140 140
with Drain Line Int.* 175 175 175 175 175
[bar] peak** 210 210 210 210 210
Max. Starting Pressure with Unloaded Shaft, [bar] 8 8 8 8 8
Min. Starting Torque at max. press. drop cont. 71 91 113 133 151
[daNm] at max. press. drop Int.* 85 109 136 155 170
Min. Speed***, [RPM] 10 9 8 6 5
Weight, avg. [kg] MV 31,8 32,6 33,5 34,9 36,5
MVW 32,4 33,2 34,1 35,5 37,1
MVS 22,7 23,5 24,4 25,6 27,7
* Intermittent operation: the permissible values may occur for max. 10% of every minute.
** Peak load: the permissible values may occur for max. 1% of every minute.
*** For speeds of 5 RPM lower than given, consult factory or your regional manager.
FUNCTION DIAGRAMS
MV 315
M Q=10 l/min 150 l/min
daNm 25 l/min 50 l/min 75 l/min 100 l/min 125 l/min 160 l/min 200 l/min
120
p=240 bar
100
40 kW
int.
50 kW
30 kW 200 bar
80
175 bar
cont.
20 kW
60 140 bar
10 kW
105 bar
40 N=5 kW
85%
70 bar
20
80%
70% 35 bar
0
cont. int.
n
-1
0 50 100 150 200 250 300 350 400 450 500 550 600 650 min (rpm)
MV 400
M
Q=10 l/min
daNm
25 l/min 50 l/min 75 l/min 100 l/min 125 l/min 150 l/min 175 l/min 200 l/min 240 l/min
160
140
p=240 bar
int.
120
50 kW 200 bar
100
175 bar
cont.
40 kW
80
140 bar
30 kW
60
87% 105 bar
20 kW
85%
40
70 bar
N=5 kW 80% 10 kW
20
70% 35 bar
0
cont. int.
n
0 50 100 150 200 250 300 350 400 450 500 550 600 min-1 (rpm)
The function diagrams data was collected at back pressure 5÷10 bar
and oil with viscosity of 32 mm²/s at 50° C.
45
MV
MOTORS
FUNCTION DIAGRAMS
MV 500
180
p=240 bar
160 50 kW
int.
40 kW
60 kW
140 30 kW 200 bar
120
175 bar
cont.
20 kW
100
140 bar
10 kW
80
105 bar
60 N=5 kW
40 70 bar
87% 85%
20 80%
70% 35 bar
0
cont. int.
n
-1
0 50 100 150 200 250 300 350 400 450 500 min (rpm)
MV 630
M Q=10 l/min 175 l/min
daNm 25 l/min 50 l/min 75 l/min 100 l/min 125 l/min 150 l/min 200 l/min 240 l/min
200
p=210 bar
int.
175 60 kW
40 kW 180 bar
150 30 kW 50 kW
150 bar
cont.
125
20 kW
75 10 kW
90 bar
N=5 kW
50
87% 60 bar
85% 80%
70%
25
30 bar
0
cont. int.
n
-1
0 50 100 150 200 250 300 350 400 min (rpm)
The function diagrams data was collected at back pressure 5÷10 bar
and oil with viscosity of 32 mm²/s at 50° C.
46
MV
MOTORS
FUNCTION DIAGRAMS
MV 800
M Q=10 l/min 175 l/min
daNm 200 l/min
25 l/min 50 l/min 75 l/min 100 l/min 125 l/min 150 l/min 240 l/min
225
int.
200
p=180 bar
175
160 bar
150 40 kW
cont.
20 kW 130 bar
125 30 kW
75 N=5 kW
75 bar
50
80%
85% 50 bar
25
70%
25 bar
0
cont. int.
n
-1
0 50 100 150 200 250 300 min (rpm)
The function diagrams data was collected at back pressure 5÷10 bar
and oil with viscosity of 32 mm²/s at 50° C.
5000
The output shaft runs in tapered bearings that
Pa=0 daN
4000 permit high axial and radial forces. Curve " 1"
shows max. radial shaft load. Any shaft load
3000 Pa=1500 daN
exceeding the values quoted in the curve will
2000 seriously reduce motor life. The two other
curves apply to a B10 bearing life of 3000
1000
hours at 200 RPM.
0 25 50 75 100 125 150 175 mm
Pa=1500 daN
Pa=1500 daN
47
MV
MOTORS
DIMENSIONS AND MOUNTING DATA
Port A
Port B Mounting
Porting
Side Ports
C
P (A, B)
C SAE C Mount
T
4xø14,3
C: 4xM12- 12 mm depth
P(A,B): 2xG1 - 20 mm depth W Wheel Mount
T: G 1/4 - 12 mm depth
Standard Rotation
Viewed from Shaft End
Port A Pressurized - CW
Port B Pressurized - CCW
Reverse Rotation
Viewed from Shaft End
Port A Pressurized - CCW
Port B Pressurized - CW T
48
MV
MOTORS
S Short Mount
T
69
Port A Port B
P (A,B)
4xø14
MVS
ø180±0,2
49
MV
MOTORS
DIMENSIONS AND MOUNTING
V Very Short Mount
P (A,B)
C: 4xM12- 12 mm depth
Standard Rotation
P(A,B): 2xG1 - 20 mm depth Viewed from Shaft End
Port A Pressurized - CW
Type L, mm *L 1, mm L2 , mm L 3, mm
Port B Pressurized - CCW Drain
MVV 315 121,5 22,0 68,0 29,5 port
Reverse Rotation
MVV 400 128,5 29,0 75,0 32,5
Viewed from Shaft End
MVV 500 136,5 37,0 83,0 34,5 Port A Pressurized - CCW
MVV 630 147,0 47,5 93,0 34,0 Port B Pressurized - CW
MVV 800 161,0 61,5 107,5 30,0
50
MV
MOTORS
DRAIN CONNECTION
A drain line ought to be used when pressure in the return line can exceed the permissible pressure. It can be
connected:
- For MVS at the drain port of the motor;
- For MVV at the drain connection of the attached component. The maximum pressure in the drain line is limited by
the attached component and its shaft seal.
The drain line must be possible for oil to flow freely between motor and attached component and must be led to the
tank. The maximum pressure in the drain line is limited by the attached component and its seal.
51
MV
MOTORS
SHAFT EXTENSIONS
C - ø50 straight, Parallel key A14x9x70 DIN 6885 CO - ø2¼"[57,15] straight,Parallel key ½ "x½"x 2¼" BS46
12,72-0,02 79
14-0,043 79
ø57,15-0,015
ø50 +0,002
62,9-0,2
+0,018
+0,5
53+0,2
ø60
ø60
max 122
max 122
SH -ø2 1/8 "splined, 16 DP 8/16 ANSI B92.1-1976 K -tapered 1:10, Parallel key B16x10x32 DIN 6885
S=65
70
Tightening Torque
79
70±1 daNm
56 +2 16-0,043 40
ø53,975 -0,025
M42x3
ø60
ø78
ø60
32,25 -0,2
ORDER CODE
1 2 3 4 5
MV
NOTES:
* The permissible output torque for shafts must not be exceeded!
The hydraulic motors are mangano- phosphatized as standard.
52