User Manual: TC222W TC242W
User Manual: TC222W TC242W
User Manual: TC222W TC242W
TC222W
TC242W
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
Table Of Contents
8 Cleaning
10 Safety Precautions
10 Symbols
11 Electricity and Safety
12 Installation and Safety
14 Operation and Safety
20 Parts
20 Frontal Buttons
22 Rear View
23 Side View
24 Installation
24 Attaching the Stand
25 Adjusting the Product Tilt and Height
25 Rotating the Monitor
26 Installing a Wall-mount Kit or Desktop Stand
28 Anti-theft Lock
Table Of Contents 2
Table Of Contents
49 Contrast
49 Configuring Contrast
50 Sharpness
50 Configuring Sharpness
52 Game Mode
52 Configuring Game Mode
Table Of Contents 3
Table Of Contents
57 Image Size
57 Changing the Image Size
59 Coarse
59 Adjusting Coarse
60 Fine
60 Adjusting Fine
62 Green
62 Configuring Green
63 Blue
63 Configuring Blue
64 Color Tone
64 Configuring the Color Tone Settings
65 Gamma
65 Configuring Gamma
RESIZING OR 66 Language
RELOCATING THE 66 Changing the Language
68 Display Time
68 Configuring Display Time
69 Transparency
69 Changing Transparency
Table Of Contents 4
Table Of Contents
84 Q&A
SPECIFICATIONS 86 General
88 PowerSaver
Table Of Contents 5
Table Of Contents
92 Correct Disposal
92 Correct disposal of batteries in this product
93 Terminology
INDEX
Table Of Contents 6
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
The amount of such administration charge will be advised to you before any work or home visit is
carried out.
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cable to the product after cleaning the product.
6. Power on the monitor and computer.
Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
10 cm (3.93 inches)
10 cm (3.93 inches)
10 cm 10 cm
(3.93 inches) (3.93 inches)
10 cm (3.93 inches)
Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning.
(Service fee will be charged.)
Safety Precautions
Caution
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Symbols
Warning A serious or fatal injury may result if instructions are not followed.
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Connect the power plug to a grounded power socket (type 1 insulated devices
only).
!
An electric shock or injury may result.
Do not bend or pull the power cable with force. Do not weigh the power cable
down with a heavy object.
Clean any dust around the pins of the power plug or the power socket with a dry
cloth.
!
Otherwise, a fire may result.
Caution
Do not use the power cable for products other than authorized products supplied
by Samsung.
!
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
The power cord must be disconnected to cut off power to the product when
! an issue occurs.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cable from the power socket.
Warning
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
!
Children may suffocate.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
!
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Caution
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
Installing the product in an unusual place (a place exposed to a lot of fine dust,
chemical substances, extreme temperatures or a significant presence of
SAMSUNG
moisture, or a place where the product will operate continuously for an extended
! period of time) may seriously affect its performance.
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
To move the product, first disconnect all the cables from it, including the power
cable.
!
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cable immediately and contact Samsung Customer Service Center.
!
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously
harmed.
If the product is dropped or the outer case is damaged, turn off the power and
disconnect the power cord. Then contact the Samsung Customer Service
Center.
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
During a lightning or thunderstorm, power off the product and remove the power
cable.
!
An electric shock or fire may result.
Do not move the product by pulling the power cable or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
!
GAS Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cable or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
!
An explosion or fire may result.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
100
object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center.
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center.
Product failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
!
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cable from the power socket if you do not plan on using
-_- the product for an extended period of time (vacation, etc.).
!
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Remove the plastic bag from the AC/DC power adapter before you use it.
Do not let water enter the AC/DC power device or get the device wet.
Do not put the AC/DC power adapter near to any heating apparatus.
If you place the AC/DC power adapter so that it is hanging with the cord input
facing upwards, water or other foreign substances could enter the Adapter and
cause the Adapter to malfunction.
!
Make sure to rest the AC/DC power adapter flat on a table or the floor.
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
When using headphones or earphones, do not turn the volume too high.
Contact the dealer from whom you purchased the product if any item is missing.
The pictures may look different from the actual components.
Components
Warranty card
Quick Setup Guide Regulatory guide
(Not available in some locations)
Power cable
AC/DC power adapter (Only provided with the
Stand base
(Detachable) detachable AC/DC power
adapter)
1 Preparations 19
1 Preparations
1.2 Parts
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
EYE
MENU SAVER SOURCE
AUTO
EYE
MENU SAVER SOURCE
AUTO
Icons Description
Open or close the onscreen display (OSD) menu, or return to the parent
menu.
OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
Enable: To lock the OSD control, press the [ MENU ] button for 10
seconds.
1 Preparations 20
1 Preparations
Icons Description
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Client/Analog). If you power on the product or
change the input source by pressing the [ ] button, a message
that shows the changed input source will appear at the top left corner of
the screen.
Press one of the buttons on the monitor, Function Key Guide will appear
on the screen. (This does not apply to the power button.)
If you press a button on the front of the monitor, an Function Key Guide
will display showing the function of the button before the menu for the
Function Key Guide pressed button appears.
To go to the menu, press the button on the front of the monitor again.
Function Key Guide may vary according to functions and models. Please
refer to actual product.
1 Preparations 21
1 Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Description
Speaker
1 Preparations 22
1 Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
MIC
RGB IN
Port Description
MIC
Connect to a microphone.
RGB IN
Connects to a PC device using the D-SUB cable.
1 Preparations 23
1 Preparations
1.3 Installation
Before assembling the product, place the product down on a flat and stable surface so that the screen is
facing downwards.
Place a protective cloth or Insert the stand base into the Do not remove the fixing pin until
cushion on a flat surface. Next, stand in the direction of the you are finished attaching the
place the product with the face arrow. stand.
down on top of the cloth or
cushion.
Fasten the screw tightly (using a After installing the stand, place You can remove the fixing pin
screwdriver or coin) into the the product upright. and adjust the stand now.
bottom of the stand base.
- Caution
Do not hold the product upside
down only by the stand.
1 Preparations 24
1 Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
-3°(±2°) - 25°(±2°)
1 Preparations 25
1 Preparations
Before Installation
Power the product off and remove the power cable from the power socket.
Place a protective cloth or Unfasten the screw from the Lift and detach the stand.
cushion on a flat surface. Next, back of the product.
place the product with the face
down on top of the cloth or
cushion.
1 2
3 4
1 Preparations 26
1 Preparations
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
Notes
Using a screw longer than the standard length can damage the internal components of the
product.
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a wall-
mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10 cm
or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.
To install the monitor using a wall mount, disconnect the stand base from the monitor.
1 Preparations 27
1 Preparations
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
1 Preparations 28
2 Using "Windows Embedded Standard 7"
The Microsoft Windows Embedded Standard 7 (WES7) client uses the Microsoft Windows
Embedded Standard 2011 OS. When the WES client is connected to a server where Citrix
XenDesktop, VMware Horizon, or Microsoft Remote Desktop Connection service is available, the
keyboard, mouse, audio/video, and display data will be forwarded to the client through the network
between the client and server.
Connectable Servers
A Citrix XenDesktop Server
Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 where the Terminal Service and
Citrix XenServer are installed
A VMware Horizon Server
Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 where the Terminal Service and
VMWare Server are installed
A Microsoft RDP (Remote Desktop Protocol) Server
Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 where the Terminal Service are
installed
Microsoft Windows 7 Professional
This manual describes the functions provided by the WES Client. However, it does not explain general
functionalities of WES. For more general information on WES7, refer to WES7 Help provided by
Microsoft.
Wake On LAN
This feature allows you to power on the product by sending a pre-determined command from an
external system to the product over a network.
Make sure the network is capable of data communication with the PC that sends the command to
the product. Ensure you have a program that can generate Wake on LAN signals.
Make sure a power supply is always connected to ensure the feature works when the product
is turned off.
The feature is intended to power on the product. (It does not support the function to power off
the product.)
3 Press F10 to save the change (Save) and select Yes at the prompt to exit from the current
session.
Wake on USB
The feature switches the system to normal operation mode if the system is in standby mode after
being left idle for a specified period of time. The mode will switch if a change to the keyboard or
mouse input is detected.
LAN
1 Connect a USB device (keyboard, mouse, etc.) to [ ] on the back of the product.
2.3.1 Logon
When the client starts, you can logon to the server by entering your username and password. By default,
you are automatically logged in with an Administrator account and a blank password.
Standard User
When logged on as a Standard User, there are many restrictions that protect the system from incorrect
user actions. You cannot access the system drives and there are restrictions on configuring properties for
them. To configure the client’s advanced and detailed settings, log on as an administrator.
It is recommended to create Standard User accounts for general users that use the product.
Administrator
The Administrator account has privileges to configure the system settings and install/uninstall software.
If it is required to restrict access privileges for security or administrator privileges are not needed, it is
recommended to create Standard User accounts for general users.
The audio volume icon, Enhanced Write Filter status icon, and system time are displayed on the
Administrator Taskbar. The Administrator privilege is required for adding and removing programs.
To log off the current session, shut down or restart your client, use the Start menu. [Start Shut
down]. The Shut Down Windows dialog box is displayed. To shut down the client immediately,
select [Start Shut down]. To select Log off, Restart, etc., move the mouse over the ▶ icon
next to [Shut down]. Alternatively, you can perform Log off or Shut down using the Windows
Security Dialog box by pressing [Ctrl + Alt + Del]. If ‘Force Auto Log on’ is activated, you will be
immediately logged on after each log off.
The Client Log off, Restart and Shut down take effect on the operations of the EWF (Enhanced
Write Filter). To keep the changed system configuration, you must save a cache for the current
system session into flash memory. Failing to do so will cause the changed configuration to be lost
when the client is shut down or restarted. (In the case of logging off, the configuration is
remembered when loggin in again.) For more information on the Enhanced Write Filter, refer to the
Program Help.
2.3.3 Programs
You can control a running terminal server or another computer (Windows 95 or later) remotely through a
remote desktop connection.
Remote Desktop
Windows 7 Professional or Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 must
be installed on the computer to be controlled remotely. This computer is called a host.
A remote computer running on an operating system later than Windows 95 is required. This
remote computer is called a client. The client software for the remote desktop connection must be
installed on the client.
You must also be connected to the Internet. A broadband Internet connection is good for high
performance. However, because the remote desktop transmits a minimum set of data including
the display data and keyboard data to control the host remotely, a broadband Internet
connection is not required. You can run a remote desktop on a low bandwidth Internet
connection.
When running a remote desktop on Windows 7 Professional, you cannot use the operating
system of your computer.
To allow a remote PC to access your PC using any version of Remote Desktop or RemoteApp,
select "Allow connections from computers running any version of Remote Desktop (less
secure)." This option is suitable if you do not know the Remote Desktop Connection version
being used on other PCs. Note that this option is less secure than the next option (option 3).
To allow a remote PC to access your PC using a Remote Desktop or RemoteApp version
requiring a network level authentication, select "Allow connections only from computers
running Remote Desktop with Network Level Authentication (more secure)" to run Remote
Desktop using network-level authentication.
3 Options
- General : Enter in the login information for the host computer. To log in automatically, enter in
the user name and password.
- Display : The Remote Desktop Connection sends and receives compressed screen data. If
you set the resolution and color quality to the high option, the speed may become slow.
- Local Resources : Specify whether to use the hard disks and ports.
- Programs : Select an application and specify the folder where you want to run the application
when a connection is established to the host PC.
- Experience : Specify the connection speed and the menu items you want to use on the
remote PC connected. The settings specified will be shared with the host PC.
For more information on Remote Desktop Connections, visit the Microsoft web site.
Internet Explorer
A WES Client includes Internet Explorer. This program is permitted for all users. Microsoft website.
Enhanced Write Filter (EWF) protects a flash volume from write access and consequently, preserves
the durability of the flash device. EWF provides read and write access through a cache to the client
instead of allowing direct access to a flash volume.
If EWF is activated, data is not stored to the flash. The data stored in the cache is only effective while the
client is operating. The cached data will be lost when restarting or shutting down your client. Therefore, to
store the data written to the registry, favorites and cookie folders, etc., the content stored in the cache
should be transferred to the flash. An error message is displayed when it is not possible to write to the
cache due to a lack of memory. If this message is displayed, you have to deactivate EWF to flush the
EWF cache. The user can double-click the EWF icon on the tray at the bottom right of the screen to call
the EWF Manager. A user can also change the EWF configuration by entering EWF management
commands at the command prompt. This task requires the Administrator privilege.
You can also perform this operation by entering “ewfmgr.exe c: -commitanddisable” at the
command prompt and restarting your computer.
You can view the configurations for the protected volumes by entering “ewfmgr.exe c:” at the
command prompt.
The File-Based Write Filter (FBWF) protects the memory of the client from being overwritten by any
unauthorized user. By restricting excessive writing into the memory, the FBWF allows you to use the
client for a long time. If you request I/O, the FBWF has the client perform its operations using the cache
instead of the memory so that the memory can be protected.
The data saved in the cache is preserved while the client operates normally. It is removed when it is
restarted or exited. To save the changes, you should write the relevant file onto the disk using the commit
command. If you don’t know which file is changed, disable the FBWF, change it, and enable it again.
You can control the FBWF using the various options of the command at a command prompt.
FBWF Configuration
Current FBWF status : Displays the current status of the FBWF (Enabled or Disabled).
Boot command : Displays the FBWF command that will be performed at the next boot-up.
RAM Used by FBEF : Displays the size of the RAM the FBWF is using. If the current status is
set to "Disabled", the used memory is displayed as 0 KB.
Threshold : Displays the maximum size of the RAM that the FBWF can use.
FBWF Command
Enable FBWF and reboot the system : Enables the disabled FBWF and restarts the client. If
the client is not restarted, only the boot command is changed to BWF_ENABLE and the current
status is not changed.
Disable FBWF and reboot the system : Disables the enabled FBWF and restarts the client. If
the client is not restarted, only the boot command is changed to FBWF_DISABLE and the
current status is not changed.
Commit files : Even if the disks are protected by the FBWF, you can add or delete the files you
want to save on them. To write the changes onto the disk, click the [Write the changes to the
disk] button.
Session Status
Current session : Displays the volumes being protected by the FBWF and a list of the folders
and files on those volumes that are excepted from protection by the FBWF.
Next session : Select the volumes that will be protected by the FBWF when the client is
booted up next time. Also, select the folders and files that you want to except from protection
by the FBWF.
The WES Client includes Windows Media Player 12. With Windows Media Player, you can play audio
and video files on a website.
Local Drive
C Drive
The C drive is used for the system. The client OS will not operate if space available on the system
drive is not sufficient. Ensure sufficient space is available on the C drive. EWF can help maintain
available space by preventing the C drive being written to directly.
Saving Files
Your client uses a fixed size of flash memory. Therefore, it is better to save files to the server rather
than to your client.
The Administrator can map a folder to a network drive. To keep the mapping information after restarting
the client, take note of these directions carefully.
Select the Reconnect at logon checkbox in the Map Network Drive dialog box.
If the EWF or FBWF is enabled, the changes are saved on the disk.
Overview
The WES client provides a feature that restores the system to the last backup or default factory settings
in the occurrence of a critical system issue during operation. You can back up an OS image which is
working normally to USB memory or the PXE server. You can revert to a backed up image when your
client has one of these problems:
1 After the power is connected, press the Home key immediately after the system starts during
boot to enter the boot menu.
2 Select the Recovery Mode menu and press the P key to enter "admin" which is the password.
3 Run the Recovery Mode menu by pressing the Enter key.
4 If the PROMPT "root@xxxxx:/#" appears, enter "recovery" to restore the system.
5 If PROMPT appears after a message informing that the system is successfully restored, run the
reboot command to restart the system.
Disk is configured as follows. Deleting or changing partitions may disable booting or the Standalone
restore solution.
Data saved by the user and customized settings are deleted after a system restore.
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
RGB IN
1 Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the
PC.
2 Connect the AC/DC power adapter to the product and a power socket. Next, turn on the power
switch on the PC. (For details, refer to "3.2.5 Connecting the Power".)
3 Press [ ] to change the input source to Analog.
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
1 Connect [DVI-I OUT] on the product to [DVI IN] or [RGB IN] on another monitor using a DVI or DVI to
D-SUB cable.
2 Connect the AC/DC power adapter to the product and a power socket. Next, turn on the power
switch on the PC. (For details, refer to "3.2.5 Connecting the Power".)
The [DVI-I OUT] port can be used only to connect to a dual monitor.
Connect to the [DVI-I OUT] port to display the same picture on another monitor such as the
projector.
(For presentation purposes)
The maximum resolution is 1920 x 1200 when a dual monitor is connected.
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
MIC
DC 14V
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
6HWXS*XLGH
7KHRSWLPDOUHVROXWLRQIRUWKLV
PRQLWRULVDVIROORZV
****x**** **Hz
8VHWKHDERYHVHWWLQJVWRVHW
WKHUHVROXWLRQRQ\RXU3&
(QJOLVK
5HWXUQ
AUTO
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
4.1 Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
SAMSUNG
This menu is not available when MAGIC Bright is set to Dynamic Contrast mode.
This menu is not available when Smart ECO Saving is set.
This menu is not available when Eye Saver Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Brightness and press [ ] on the product.
The following screen will appear.
PICTURE
Adjust the brightness
Brightness 100 level. Values closer
to 100 mean a
Contrast 75 brighter screen.
Sharpness 60
Eye Saver Mode Off
Game Mode Off
SAMSUNG
MAGIC Bright Custom
SAMSUNG
MAGIC Angle Off
AUTO
4 Screen Setup 48
4 Screen Setup
4.2 Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
SAMSUNG
This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Contrast and press [ ] on the product.
The following screen will appear.
PICTURE
Adjust the contrast
Brightness 100 level. Values closer to
100 mean a bigger
Contrast 75 light/dark contrast.
Sharpness 60
Eye Saver Mode Off
Game Mode Off
SAMSUNG
MAGIC Bright Custom
SAMSUNG
MAGIC Angle Off
AUTO
4 Screen Setup 49
4 Screen Setup
4.3 Sharpness
SAMSUNG
This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode.
SAMSUNG
This menu is not available when MAGIC Upscale is in Mode1 or Mode2.
This menu is not available when Game Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Sharpness and press [ ] on the product.
The following screen will appear.
PICTURE
Adjust the sharpness
Brightness 100 of the picture. Values
closer to 100 mean a
Contrast 75 sharper image.
Sharpness 60
Eye Saver Mode Off
Game Mode Off
SAMSUNG
MAGIC Bright Custom
SAMSUNG
MAGIC Angle Off
AUTO
4 Screen Setup 50
4 Screen Setup
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower
blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will
decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the
blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as it
met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Eye Saver Mode and press [ ] on the product.
The following screen will appear.
PICTURE
Set to an optimum
Brightness 100 picture quality suitable
for eye relaxation.
Contrast 75
Sharpness 60
Eye Saver Mode Off
Off
Game Mode Off
On
SAMSUNG
MAGIC Bright Custom
SAMSUNG
MAGIC Angle Off
AUTO
4 Screen Setup 51
4 Screen Setup
Configure the product screen settings for game mode. Use this feature when playing games on a PC or
when a game console such as PlayStation™ or Xbox™ is connected.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Game Mode and press [ ] on the product.
The following screen will appear.
PICTURE
Optimizes image
Brightness 100 settings for playing
games.
Contrast 75
Sharpness 60
Eye Saver Mode Off
Off
Game Mode Custom
SAMSUNG On
MAGIC Bright Off
SAMSUNG
Always On
MAGIC Angle
AUTO
When the monitor turns off, enters power-saving mode or changes input sources, Game Mode
turns Off even if it is set to On.
If you want to keep Game Mode enabled all the time, select Always On.
4 Screen Setup 52
4 Screen Setup
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ SAMSUNG
] to move to MAGIC Bright and press [ ] on the product.
The following screen will appear.
PICTURE
Set to an optimum
Brightness 100 picture quality suitable
for the working
Contrast 75 environment.
Sharpness 60
Custom Custom
Eye Saver Mode 50
Standard Off
Game Mode 50
SAMSUNG Cinema Off
2200
MAGIC Bright
Dynamic Contrast Wide
SAMSUNG 0
MAGIC Angle
AUTO
4 Screen Setup 53
4 Screen Setup
SAMSUNG
MAGIC Angle allows you to configure the settings to obtain the optimum picture quality according to your
viewing angle.
SAMSUNG
This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode or Eye Saver Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
This feature provides the viewing angle, brightness, and tint to suit your preferences.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ SAMSUNG
] to move to MAGIC Angle and press [ ] on the product.
The following screen will appear.
PICTURE
Select an angle that
Brightness 100 best suits your
viewing position.
Contrast 75
Sharpness Off 60
Eye Saver Mode Lean Back ModeCustom
1 50
AUTO
1 1
5 5
2
4 Screen Setup 54
4 Screen Setup
4 Screen Setup 55
4 Screen Setup
SAMSUNG
MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ SAMSUNG
] to move to MAGIC Upscale and press [ ] on the product.
The following screen will appear.
PICTURE
Enhance picture
SAMSUNG detail and vividness.
MAGIC Upscale Off
Image Size Mode1
H-Position Mode2
V-Position
Coarse
Fine
AUTO
4 Screen Setup 56
4 Screen Setup
The functions available on the monitor may vary depending on the model. Refer to the actual product.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Image Size and press [ ] on the product.
The following screen will appear.
PICTURE
Choose the size and
SAMSUNG aspect ratio of the
MAGIC Upscale picture displayed on
Image Size Auto screen.
H-Position Wide
V-Position
Coarse
Fine
AUTO
Auto: Display the picture according to the aspect ratio of the input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
4 Screen Setup 57
4 Screen Setup
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to H-Position or V-Position, and press [ ].
The following screen will appear.
PICTURE PICTURE
Move the image Move the image
SAMSUNG displayed on the SAMSUNG displayed on the
MAGIC Upscale Off MAGIC Upscale Off
screen up or down. screen up or down.
Image Size Wide Image Size Wide
H-Position 50 H-Position 50
V-Position 50 V-Position 50
Coarse 2200 Coarse 2200
Fine 0 Fine 0
AUTO AUTO
4 Screen Setup 58
4 Screen Setup
4.11 Coarse
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Coarse and press [ ] on the product.
The following screen will appear.
PICTURE
Adjust the screen
SAMSUNG frequency.
MAGIC Upscale Off
Image Size Wide
H-Position 50
V-Position 50
Coarse 2200
Fine 0
AUTO
4 Screen Setup 59
4 Screen Setup
4.12 Fine
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Fine and press [ ] on the product.
The following screen will appear.
PICTURE
Fine-tune the
SAMSUNG
MAGIC Upscale Off screen
to get a vivid
Image Size Wide picture.
H-Position 50
V-Position 50
Coarse 2200
Fine 0
AUTO
4 Screen Setup 60
5 Configuring Tint
A detailed description of each function is provided. Refer to your product for details. Adjust the tint
SAMSUNG
of the screen. This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast
mode. This menu is not available when Game Mode or Eye Saver Mode is enabled.
5.1 Red
Adjust the value of the color red in the picture. (Range: 0~100)
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Red and press [ ] on the product.
The following screen will appear.
COLOR
Adjust the red
Red 50 saturation level.
Values closer to 100
Green 50 mean greater
intensity for the color.
Blue 50
Gamma Mode1
AUTO
5 Configuring Tint 61
5 Configuring Tint
5.2 Green
Adjust the value of the color green in the picture. (Range: 0~100)
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Green and press [ ] on the product.
The following screen will appear.
COLOR
Adjust the green
Red 50 saturation level.
Values closer to 100
Green 50 mean greater
intensity for the color.
Blue 50
Color Tone Normal
Gamma Mode1
AUTO
5 Configuring Tint 62
5 Configuring Tint
5.3 Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Blue and press [ ] on the product.
The following screen will appear.
COLOR
Adjust the blue
Red 50 saturation level.
Values closer to 100
Green 50 mean greater
intensity for the color.
Blue 50
Gamma Mode1
AUTO
5 Configuring Tint 63
5 Configuring Tint
SAMSUNG
This menu is not available when MAGIC Angle is enabled.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Color Tone and press [ ] on the product.
The following screen will appear.
COLOR
Select a color tone
Red 50 that best suits your
viewing needs.
Green
Cool 2
Blue
Cool 1
Color Tone
Normal
Gamma
Warm 1
Warm 2
AUTO
5 Configuring Tint 64
5 Configuring Tint
5.5 Gamma
SAMSUNG
This menu is not available when MAGIC Angle is enabled.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Gamma and press [ ] on the product.
The following screen will appear.
COLOR
Adjust the middle level
Red 50 of luminance.
Green 50
Blue 50
Color Tone Normal
Mode1
Gamma Mode1
Mode2
Mode3
AUTO
5 Configuring Tint 65
6 Resizing or Relocating the Screen
A detailed description of each function is provided. Refer to your product for details.
6.1 Language
A change to the language setting will only be applied to the onscreen menu display.
It will not be applied to other functions on your PC.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Language and press [ ] on the product.
The following screen will appear.
MENU SETTINGS
Set the menu
Language Deutsch language.
AUTO
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Menu H-Position or Menu V-Position, and press [ ].
The following screen will appear.
AUTO AUTO
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Display Time and press [ ] on the product.
The following screen will appear.
MENU SETTINGS
Set how long the menu
Language English window will remain on
screen for when it is
Menu H-Position 100 not in use.
Menu V-Position 2
5 sec
Display Time 20 sec
10 sec
Transparency On
20 sec
200 sec
AUTO
6.4 Transparency
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
3 Press [ ] to move to Transparency and press [ ] on the product.
The following screen will appear.
MENU SETTINGS
Configure the
Language English transparency of the
menu windows.
Menu H-Position 100
Menu V-Position 1
Display Time 20 sec
Off
Transparency On
On
AUTO
Return all the settings for the product to the default factory settings.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Reset All and press [ ] on the product.
The following screen will appear.
SETUP&RESET
Return all the
Reset All settings for the
product to the
Smart Eco Saving Off default factory
settings.
Off Timer Plus
Key Repeat Time Acceleration
AUTO
$OOWKHPHQXVHWWLQJVZLOOEHUHVHW
WRGHIDXOW
$UH\RXVXUH\RXZDQWWRUHVHW"
<HV 1R
AUTO
The Smart Eco Saving function reduces power consumption by controlling the electric current used by
the monitor panel.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Smart Eco Saving and press [ ] on the product.
The following screen will appear.
SETUP&RESET
Adjust the power
Reset All consumption of the
product to save
Smart Eco Saving energy
Off automatically.
Off Timer Plus
On
Key Repeat Time
AUTO
The functions available on the monitor may vary depending on the model. Refer to the actual product.
Off Timer
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Off Timer Plus and press [ ] on the product.
4 Press [ ] to move to Off Timer and press [ ] on the product.
5 Press [ ] to move to Off Timer and press [ ] on the product.
The following screen will appear.
SETUP&RESET
Set the monitor to
Reset All automatically turn off
after a certain time
Smart Eco Saving Off period.
AUTO
Eco Timer
AUTO
Off Timer
Enable or disable
Off Timer Off the Off Timer.
AUTO
Off: Deactivate the off timer so that the product does not power off automatically.
On: Activate the off timer so that the product powers off automatically.
6 Press [ ] to move to the option you want and press [ ].
7 The selected option will be applied.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Off Timer Plus and press [ ] on the product.
4 Press [ ] to move to Off Timer and press [ ] on the product.
5 Press [ ] to move to Turn Off After and press [ ] on the product.
The following screen will appear.
Off Timer
Set the monitor to
Off Timer automatically turn off
after a certain time
Turn Off After period.
4h
AUTO
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off
after the specified number of hours.
This option is only available when Off Timer is set to On.
For products for the market in some regions, the Off Timer is set to automatically activate 4 hours
after the product powers on. This is done in accordance with power supply regulations. If you do
not want the timer to activate, go to MENU → SETUP&RESET → Off Timer Plus and set Off
Timer to Off.
Eco Timer
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Off Timer Plus and press [ ] on the product.
4 Press [ ] to move to Eco Timer and press [ ] on the product.
5 Press [ ] to move to Eco Timer and press [ ] on the product.
The following screen will appear.
SETUP&RESET
Set the monitor to
Reset All automatically turn off
after a certain time
Smart Eco Saving Off period.
AUTO
Eco Timer
AUTO
Eco Timer
Enable or disable
Eco Timer Off the Eco Timer.
AUTO
Off: Deactivate the eco timer to disable the automatic power off feature. The product will not
power off while in power-saving mode if this feature is deactivated.
On: Activate the eco timer so that the product powers off automatically when it has been in
power-saving mode for a specified period of time.
6 Press [ ] to move to the option you want and press [ ].
7 The selected option will be applied.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Off Timer Plus and press [ ] on the product.
4 Press [ ] to move to Eco Timer and press [ ] on the product.
5 Press [ ] to move to Eco Off After and press [ ] on the product.
The following screen will appear.
Eco Timer
Set the monitor to
Eco Timer automatically turn off
after a certain time
Eco Off After period.
10m
AUTO
The Eco timer can be set between 10 and 180 minutes. The product will automatically power off
after the specified time has elapsed.
This option is only available when Eco Timer is set to On.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Key Repeat Time and press [ ] on the product.
The following screen will appear.
SETUP&RESET
Configure the
Reset All response rate of a
button when the
Smart Eco Saving Off button is pressed.
Acceleration
Off Timer Plus
1 sec
Key Repeat Time
2 sec
Acceleration
No Repeat
Auto
AUTO
8.1 INFORMATION
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ MENU ]
to display the corresponding menu screen.
2 Press [ ] to move to INFORMATION.
The current input source, frequency and resolution will appear.
INFORMATION
PICTURE
Client
COLOR 67.5kHz 60Hz NN
**** x ****
MENU SETTINGS Optimal Mode
**** x **** 60Hz
SETUP&RESET
INFORMATION
AUTO
INFORMATION
PICTURE
Analog
COLOR 67.5kHz 60Hz PP
**** x ****
MENU SETTINGS Optimal Mode
**** x **** 60Hz
SETUP&RESET
INFORMATION
AUTO
Adjust the Brightness, Contrast and Sharpness setting using the [ ] buttons in the initial screen
(where no OSD menu is displayed).
Brightness :
SAMSUNG
This menu is not available when MAGIC Bright is set to Dynamic Contrast mode.
This menu is not available when Smart ECO Saving is enabled.
This menu is not available when Eye Saver Mode is enabled.
Contrast :
SAMSUNG
This menu is not available whenMAGIC Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
Sharpness :
SAMSUNG
This menu is not available whenMAGIC Bright is in Cinema or Dynamic Contrast mode.
SAMSUNG
This menu is not available when MAGIC Upscale is in Mode1 or Mode2.
This menu is not available when Game Mode is enabled.
1 Press any button on the front of the product (when no menu screen is displayed) to display the
Function Key Guide. Next, press the [ ] button. The following screen will appear.
Sharpness
Brightness 100
Contrast
2 Press the [ ] button to alternate between the Brightness, Contrast and Sharpness settings.
3 Adjust the Brightness, Contrast and Sharpness settings using the [ ] buttons.
The MagicRMS Pro program can be used to remotely control a Samsung thin client. The design of the
user-oriented interface makes it easy and convenient to use.
Using MagicRMS Pro, you can schedule a task to be performed at a specified time on a thin client.
Also, you can manage multiple thin clients efficiently by grouping or filtering them according to specific
conditions.
To use the MagicRMS Pro Solution or MagicRMS Pro Agent and to view the user guide,
visit http://www.samsung.com/displaysolutions. Go to Support>Download Center, and search for
MagicRMS to download.
9.1.2 Components
MagicRMS Pro consists of MagicRMS Pro Server, MagicRMS Pro Database, MagicRMS Pro
Console, and PXE. MagicRMS Pro manages thin clients by interacting with the MagicRMS Pro Agent.
MagicRMS Pro Server, Database, and Console refer to Server, Database, and Console
respectively. MagicRMS Pro Agent refers to Agent.
MagicRMS Pro Server is a core component of MagicRMS Pro. The Server connects to Database and
Console and sends a command to perform a task requested by the user to thin clients where the Agent
is installed.
A task requested from the Console is saved in the Database. The saved task is forwarded to the Agent
over the Server and performed on the thin clients.
Manage thin clients and organize task requests using the Console.
9.1.6 PXE
PXE is a standard protocol that allows the Server and Client to communicate to enable the Client to boot
over a network using DHCP and TFTP.
Booting the system over a network enables a Diskless booting where the system can be operated
regardless of the operating system. It also allows the system operating system to be restored or backed
up over the network.
MagicRMS Pro Agent is installed on a thin client to perform tasks requested from the server and send
the thin client information to the server periodically.
For further details on how to use the MagicRMS Pro Agent, see help for MagicRMS Pro Agent.
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
If the screen remains blank, check the PC system, video controller and cable.
For a mode that exceeds the supported resolution (refer to "11.3 Standard Signal Mode Table"), the
message Not Optimum Mode will appear for a short time.
Issues Solutions
The screen keeps switching on and off. Check the cable connection between the product
and PC, and ensure the connectors are locked.
(Refer to "3.2 Connecting and Using a PC")
10 Troubleshooting Guide 81
10 Troubleshooting Guide
Screen issue
Issues Solutions
The power LED is off. The screen will not switch Check that the power cable is connected
on. properly. (Refer to "3.2 Connecting and Using a
PC")
The message Check Signal Cable appears. Check that the cable is properly connected to the
product. (Refer to "3.2 Connecting and Using a
PC")
Not Optimum Mode is displayed. This message appears if the signal from the
graphics card exceeds the maximum resolution or
frequency for the product.
The images on the screen look distorted. Check the cable connection to the product (Refer
to "3.2 Connecting and Using a PC")
The screen is not clear. The screen is blurry. Adjust Coarse(page 59) and Fine(page 60).
The screen appears unstable and shaky. Check that the resolution and frequency for the
PC are within the range of resolution and
There are shadows or ghost images left on the
frequency compatible with the product. Next, if
screen.
required, change the settings, referring to
Standard Signal Mode Table (page 89) in this
manual and the INFORMATION menu on the
product.
The screen is too bright. The screen is too dark. Adjust Brightness(page 48) and Contrast(page
49).
The colors on the screen have a shadow and are Change the COLOR settings.
distorted. (Refer to " Configuring Tint")
White does not really look white. Change the COLOR settings.
(Refer to " Configuring Tint")
10 Troubleshooting Guide 82
10 Troubleshooting Guide
Issues Solutions
There is no image on the screen and the power The product is operating in power-saving mode.
LED blinks every 0.5 to 1 second.
Press any key on the keyboard or move the
mouse to return to normal operating mode.
Sound issue
Issues Solutions
Issues Solutions
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is
booting, have your PC serviced.
10 Troubleshooting Guide 83
10 Troubleshooting Guide
10.2 Q & A
Question Answer
How can I change the Set the frequency on your graphics card.
frequency?
Windows XP: Go to Control Panel Appearance and
Themes Display Settings Advanced Monitor,
and adjust Refresh rate under Monitor settings.
Windows ME/2000: Go to Control Panel Display
Settings Advanced Monitor, and adjust Refresh rate
under Monitor settings.
Windows Vista: Go to Control Panel Appearance and
Personalization Personalization Display Settings
Advanced Settings Monitor, and adjust Refresh rate
under Monitor settings.
Windows 7: Go to Control Panel Appearance and
Personalization Display Screen Resolution
Advanced settings Monitor, and adjust Refresh rate under
Monitor settings.
Windows 8: Go to Settings Control Panel Appearance
and Personalization Display Screen Resolution
Advanced settings Monitor, and adjust Refresh rate under
Monitor settings.
10 Troubleshooting Guide 84
10 Troubleshooting Guide
Question Answer
How can I change the Windows XP: Go to Control Panel Appearance and
resolution? Themes Display Settings, and adjust the resolution.
Windows ME/2000: Go to Control Panel Display
Settings, and adjust the resolution.
Windows Vista: Go to Control Panel Appearance and
Personalization Personalize Display Settings, and
adjust the resolution.
Windows 7: Go to Control Panel Appearance and
Personalization Display Adjust Resolution, and adjust
the resolution.
Windows 8: Go to Settings Control Panel Appearance
and Personalization Display Adjust Resolution, and
adjust the resolution.
How do I set power-saving Windows XP: Set power-saving mode in Control Panel
mode? Appearance and Themes Display Screen Saver
Settings or BIOS SETUP on the PC.
Windows ME/2000: Set power-saving mode in Control Panel
Display Screen Saver Settings or BIOS SETUP on the
PC.
Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization Personalize Screen
Saver Settings or BIOS SETUP on the PC.
Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization Personalize Screen
Saver Settings or BIOS SETUP on the PC.
Windows 8: Set power-saving mode in Settings Control
Panel Appearance and Personalization Personalize
Screen Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
10 Troubleshooting Guide 85
11 Specifications
11.1 General
Panel Size 495.60 mm (H) x 292.20 mm (V) 544.80 mm (H) x 320.50 mm (V)
19.5 inches (H) x 11.5 inches (V) 21.4 inches (H) x 12.6 inches (V)
Display area 479.8 mm (H) x 271.3 mm (V) 525.22 mm (H) x 297.22 mm (V)
18.9 inches (H) x 10.7 inches (V) 20.7 inches (H) x 11.7 inches (V)
Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data
exchange between the monitor and PC system optimizes the monitor settings. Monitor installation
takes place automatically. However, you can customize the installation settings if desired.
The above specifications are subject to change without notice to improve quality.
11 Specifications 86
11 Specifications
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
11 Specifications 87
11 Specifications
11.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-saving mode functions only when the product is connected to a PC that has a
power-saving function.
Normal operation
STAND BY (S3) Power off (S5)
mode
PowerSaver
(Power button off)
Typical Rating Client Analog
Power TC222W 24 W 56 W
2.7 W 2.5 W
Consumption TC242W 27 W 57 W
The power consumption level can vary in different operating conditions or when settings are
changed.
To reduce the power consumption to 0, disconnect the power cord. Disconnect the power cable if
you will not be using the product for an extended period of time (during vacation, etc.)
11 Specifications 88
11 Specifications
This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT
monitor before you exchange it with the LCD monitor.
Vertical Frequency 56 - 75 Hz
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
Horizontal Vertical
Pixel Clock Sync Polarity
Display Mode Frequency Frequency
(MHz) (H/V)
(kHz) (Hz)
11 Specifications 89
11 Specifications
Horizontal Vertical
Pixel Clock Sync Polarity
Display Mode Frequency Frequency
(MHz) (H/V)
(kHz) (Hz)
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a
horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The
repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
11 Specifications 90
Appendix
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.).
If a product is reinstalled or devices are connected additionally after installing the purchased product
for the first time.
If a product is reinstalled to move to a different spot or to move to a different house.
If customer requests instructions on how to use because of another company's product.
If customer requests instructions on how to use the network or another company's program.
If customer requests software installation and setup for the product.
If a service technician removes/cleans dusts or foreign materials inside of the product.
If customer requests an installation additionally after purchasing a product through home-shopping
or online.
Others
If product fails by natural disaster (lightning, fire, earthquake, flood damage, etc).
If consumable components are all used up (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp,
Filter, Ribbon, etc.).
If customer requests a service in case the product has no defect, service fee may be charged.
So please read User Manual first.
Appendix 91
Appendix
Correct Disposal
Appendix 92
Appendix
Terminology
Coarse
Coarse refers to the frequency of radio wave vibrations per second. A higher frequency transmits a
larger amount of data and is reflected easier. A lower frequency traverses obstacles more easily and
can travel farther, but it transmits a smaller amount of data. The Coarse menu allows you to manually
adjust the frequency to obtain the optimum picture quality. Adjust Coarse referring to Standard Signal
Mode Table (page 89) according to the performance of your product and enjoy improved picture
quality.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the
brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Grey scale
Scale refers to levels of color intensity that show variations of color change from darker areas to
brighter areas on the screen. Changes to the screen brightness are expressed with black and white
variation, and grey scale refers to the medium area between black and white. Changing the grey scale
through Gamma adjustment will change the medium brightness on the screen.
Scanning rate
Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted
as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of
screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that
the screen refreshes 60 times per second. The screen scanning rate depends on the performance of
the graphics cards in your PC and monitor.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are
transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal
frequency is measured in kHz and represents how many times horizontal lines per second are
transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the
horizontal lines that make up an image are transmitted 85 000 times per second, and the horizontal
frequency is indicated in 85kHz.
Appendix 93
Appendix
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and
represents how many images can be created per second by those horizontal lines. A vertical
frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is
also called "refresh rate" and affects screen flicker.
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the
level of display detail.
A higher resolution displays a greater amount of information on the screen and is suitable for
performing multiple tasks at the same time.
E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal frequency) and 1080
vertical lines (vertical resolution).
Appendix 94
Index
B Installation 24
Before Connecting 43
Blue 63
K
Brightness 48
Key Repeat Time 76
C L
Checking the Contents 19
Languagey 66
Cleaning 8
Coarse 59
Color Tone 64
O
Off Timer Plus 72
Connecting and Using a PC 43
Connection to Use "Windows Embedded
Standard 7" 31
P
Contrast 49
Parts 20
Copyright 7
PowerSaver 88
Correct posture to use the product 18
Q
D Q & A 84
Display Time 68
R
E Red 61
Eye Saver Mode 51
Requirements Before Contacting Samsung
Customer Service Center 81
Reset All 70
F
Responsibility for the Pay Service (Cost to
Fine 60 Customers) 91
G S
Game Mode 52
Safety Precautions 10
Gamma 65
SAMSUNG MAGIC Angle 54
General 86
SAMSUNG MAGIC Bright 53
Green 62
SAMSUNG MAGIC Upscale 56
Sharpness 50
I Smart Eco Saving 71
Image Size 57 Standard Signal Mode Table 89
INFORMATION 77
Index 95
Index
T
Terminology 93
Transparency 69
U
Using "Windows Embedded Standard 7" 32
W
What is "Windows Embedded Standard 7"
Client? 29
Index 96