Tab 2011 20xenon 20headlights

XENON HEADLIGHTS
OVERVIEW
The automotive industry/press often identify xenon lighting systems as HID (high intensity
discharge) systems. Xenon headlight technology was first introduced to the US market
exclusively on the E32 750iL in 1993. BMW xenon headlight systems have evolved and
their availability as optional equipment has spread throughout the model lineup.
Blue/White in color and using ellipsoidal technology Xenon headlights provide improved
night time visibility in all driving conditions compared with traditional Halogen bulb head-
lights.
BENEFITS:
Xenon headlights provide the following benefits:
• Longer bulb life. Typically, xenon bulbs will last from 3 to 5 times longer than halogen.
• More light output. Xenon headlights produce from 2.5 to 3 times more lumens than
halogen.
• Blue/White light (simulates natural daylight). Xenon bulbs produce a blue/white light
while halogen bulbs produce a yellow light. The light color of a light source is measured
in color temperature (not to be confused with thermal temperature). Color temperature
is measured in Kelvins (K). The higher the color temperature the whiter the light.
Natural daylight = 4,500 to 5,000 K
Xenon headlights = 4,000 to 4,500 K
Halogen headlights = 3,200 K (yellow in color)
• Better driving visibility.
The combination of higher
lumens and higher color
temperature provide a supe-
rior lighting source.
The beam is wider and

brighter in front of the vehi-
cle than conventional halo-
gen bulbs improving safety
and driver comfort.
• Lower operating temper-
ature.
• Lower power consump-
tion.
129
VERSION IDENTIFICATION & SYSTEM SUMMARIES
Version identification is specific to vehicle model with the exception of the E38.
There are two E38 Xenon systems. The early sys-
tem identified as Generation 2.1 and equipped on
95-98 model year 750iL vehicles. The headlight
design of this version has a flat bottom edge.
The Generation 3 system has been introduced on
1999 model year E38 vehicles. This system can be
visually identified by the rounded bottom edge as of
the headlight assembly shown. E38 Generation 3 Headlight
LWR: All 1999 model year systems are also equipped with LWR (Headlight Beam Throw
Control). This system automatically adjusts the vertical position of the headlight beams to
compensate for vehicle loads ensuring optimum beam throw. LWR components and func-
tion is described further on in this section.
Headlight Replacement Parts: In previous model years, individual replacement parts

were not available for headlight assemblies. This was due to the Federal Motor Vehicle
Safety Standards (FMVSS) relating to pitting or corrosion of the reflector components in
non-sealed beam light assemblies.
BMW has recently submitted corrosion test data for headlight replacement components
which have passed the FMVSS providing availability of headlight assembly spare parts. The
approval has been given for all Bosch headlight assemblies (including halogen systems).
Hella system components are currently being tested and in all likelihood be available in the
near future.
Vehicle/ Model Manufacturer(s)/ LWR- Head Individual

Model Year Version ID Light Beam Replacement
Throw Cont. Parts Available
E32/ 93-94 Hella (Light & No No

750iL CM ”control module”)
Generation 1
E38/ 95-98 Bosch (Light & CM) No Yes

750iL Generation 2.1
E38/ 99- Bosch (light) Yes Yes

All Hella (CM)
Generation 3
E39 99- Hella Yes No

All Generation 3 (possible in future)
E46 99- Bosch (Light & CM) Yes Yes
130
XENON HIGH INTENSITY DISCHARGE BULBS
Xenon bulbs are identified as D-2S (D=Discharge).

Xenon bulbs illuminate when an arc of electrical cur-
rent is established between two electrodes in the bulb.
The xenon gas sealed in the bulb reacts to the electri-
cal excitation and heat generated by the current flow.
The distinct bluish/white brilliant light is the result of the
xenon gas reacting to the controlled current flow.
Phases of Bulb Operation:
Starting Phase: The bulb requires an initial high voltage starting pulse of 18-25kV to estab-
lish the arc.
Warm Up Phase: Once the arc is established the power supply to the bulb is regulated to
2.6A generating a lamp output of 75 watts. This is the period of operation where the xenon
gas begins to brightly illuminate. The warm up phase stabilizes the environment in the bulb
ensuring continual current flow across the electrodes.
Continuous Phase: Once the warm up phase is completed, the system switches to a con-
tinuous mode of operation. The supply voltage for the bulb is reduced and the operating
power required for continual bulb illumination is reduced to 35 watts which is less than a
conventional halogen bulb.
FUNCTIONAL DESCRIPTION
To regulate the power supply to the bulbs, additional components are required. The xenon
control modules (1 per light) receive operating power from the lighting control module (LCM
E38/E39 -- LSZ E46) when the headlights are switched on. The xenon control modules pro-
vide the regulated power supply to illuminate the bulbs through their phases of operation.
The igniters establish the electric arcs. Integral coils generate the initial high voltage start-
ing pulses from the control module provided starting voltage. Thereafter they provide a
closed circuit for the regulated power output from the control modules.
131
XENON BULB MONITORING
Xenon bulb function is monitored by the Lighting Control Module (LCM E38/E39 -- LSZ
E46). The bulbs are only “hot” monitored. Cold monitoring is not possible since the light-
ing control module is not in direct control of the xenon bulb. For this reason cold monitor-
ing for low beam headlights is encoded off in the lighting control module for Xenon head-
light equipped vehicle.
The lighting control module detects xenon bulb failure via a reduction in current flow to the
xenon control module. When a bulb fails, the xenon control module’s current consumption
drops to 60mA indicating unsuccessful xenon bulb illumination. The lighting control mod-
ule then posts the appropriate matrix display message or LED illumination in the Check
Control Pictogram display of the E46 and E39 Low Instrument Clusters.
XENON HEADLIGHT ASSEMBLY COMPONENTS (Example - E46)
Xenon Control H-7 Halogen Bulb

Module Cover (High Beam)
Rubber Cover Boot
Xenon Control Module
LWR Stepper Motor
Igniter
Gasket Seal D-2S Xenon Bulb

(Low Beam)
Light Frame Assembly
Replaceable Lens Cover
132
DIAGNOSIS
Xenon control modules are not connected to the diagnostic link. However, the vehicle spe-
cific Lighting Control Module (E38/E39 - LCM or E46 - LSZ) does incorporate xenon head-
light specific diagnosis up to the xenon control module.
XENON HEADLIGHT TESTING
Warning: Xenon headlight control systems generate high output voltage. Prior to head-
light removal or testing observe the vehicle warning labels and be cautious by following
safeguards to prevent accidental injury.
All xenon headlight systems (control

module, igniter and bulb) can be test-
ed with Special Test Adapter (P/N 90
88 6 631 000) in conjunction with the
DIS Measurement System only.
Refer to SI 04 33 96 for detailed

adapter introductory information.
The DIS Measuring System includes all

of the cable connection information
and test procedures in the “Xenon
Preset Measurement”.
The test provides an automatic oscilloscope setup and provides conclusive “defective/not
defective” test results.
XENON HEADLIGHT SI/TRI BULLETINS
• SI 6308 98: Xenon Headlamp Reduced Service Life - 1999 740iL. This bulletin address
a small group of possibly defective xenon control modules. This bulletin uses the spe-
cial test adapter and specific oscilloscope setup procedures to check the xenon con-
trol module output.
• SI 63 02 98: E39 Headlight Alignment Procedure
• SI 63 02 93: Xenon Headlights - Color, Fuses, Warranty
• TRI 63 01 92: Gas Discharge Xenon Low Beam Headlights.
133

Tab 2011 20xenon 20headlights

Uploaded by

Copyright:

Available Formats

Tab 2011 20xenon 20headlights

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tab 2011 20xenon 20headlights

Uploaded by

Copyright:

Available Formats

XENON HEADLIGHTS

The beam is wider and

Headlight Replacement Parts: In previous model years, individual replacement parts

Vehicle/ Model Manufacturer(s)/ LWR- Head Individual

E32/ 93-94 Hella (Light & No No

E38/ 95-98 Bosch (Light & CM) No Yes

E38/ 99- Bosch (light) Yes Yes

E39 99- Hella Yes No

E46 99- Bosch (Light & CM) Yes Yes

Xenon bulbs are identified as D-2S (D=Discharge).

Phases of Bulb Operation:

XENON HEADLIGHT ASSEMBLY COMPONENTS (Example - E46)

Xenon Control H-7 Halogen Bulb

LWR Stepper Motor

Gasket Seal D-2S Xenon Bulb

Light Frame Assembly

Replaceable Lens Cover

XENON HEADLIGHT TESTING

All xenon headlight systems (control

Refer to SI 04 33 96 for detailed

The DIS Measuring System includes all

XENON HEADLIGHT SI/TRI BULLETINS

• SI 63 02 98: E39 Headlight Alignment Procedure

• SI 63 02 93: Xenon Headlights - Color, Fuses, Warranty

• TRI 63 01 92: Gas Discharge Xenon Low Beam Headlights.

You might also like