Notes On Module 6 Acid Base Reactions 61715aaccd7e2
Notes On Module 6 Acid Base Reactions 61715aaccd7e2
Notes On Module 6 Acid Base Reactions 61715aaccd7e2
Bases, unlike acids, are named using rules for naming ionic compounds.
Present in stomach to break down proteins. Cleaning agents for bricks and concrete.
Production of a range of other chemicals
Ammonia (NH3 )
Household cleaners. Production of fertilisers, explosives and plastics
Corrosive
Tastes sour
Properties Of Bases
Tastes bitter
Chemical Indicators
Indicators are substances which change colour according to the pH of the substance they
are immersed in. Each indicator has its own range in pH where, within that range, it will
change from one colour to another.
By knowing the pH colour change range of indicators, it is possible to determine that a
substance is above or below a specific pH, and as a result, whether they are acidic basic
and to what degree.
Common indicators and their ranges include:
When an acidic solution is combined with a basic solution, a neutralisation reaction occurs
where the solutions are said to be neutralised - concentrations of hydronium and
hydroxide ions within the mixture are equal.
Example: solutions of phosphoric acid and potassium hydroxide react to form a potassium
phosphate salt and water
Example: solutions of hydrochloric acid and ammonia react to form ammonium phosphate
When an acid reacts with a metal carbonate or a metal hydrogen carbonate (bicarbonate),
it produces a salt, water and carbon dioxide.
Example: solution of sulfuric acid and solid sodium carbonate react to form sodium sulfate,
water and carbon dioxide.
H2 SO4 (aq) + Na2 CO3 (s) → Na2 SO4 (aq) + H2 O (l) + CO2 (q)
When an acid reacts with a reactive metal, ir produces a salt and hydrogen gas.
Example: solution of hydrochloric acid and solid iron react to form iron chloride and
hydrogen gas.
Brushing Teeth
Remnants of food form acid resulting from bacterial action that dissolves the enamel
protecting teeth. Tooth paste contains a mix of mild bases such as sodium hydrogen
carbonate and sodium fluoride which neutralises the acids in our mouth, protecting our
teeth from decay
Antacids
Baking Powder
A wasp venom is basic whilst a bee sting is acidic. The wasp sting can be neutralised
by a weak acid like acetic acid and the bee sting can be neutralised by a weak base
like sodium bicarbonate.
Soils need to at a specific pH level for optimal crop growth. Lime fertiliser can be used
to neutralise acidic soil and rotting compost cna be used to neutralise basic soil. The
formation of acidic gases like carbon dioxide can also neutralise the surroudning soil.
Fertiliser Production
Industries that discharge effluent (waste) into waterways are required to ensure they
are not harmful to the environment. This involves neutralising acidic discharge.
Latex Production
The entropy of neutralisation is the thermal energy released in the reaction when an acid
and a base react in stoichiomateric proportions to make a salt and 1 mol of water
represented by the symbol, ΔHneut .
All the heat energy released by the neutralisation reaction is transferred into the salt
solution.
📖 explore the changes in definitions and models of an acid and a base over time to
explain the limitations of each model, including but not limited to:
– Arrhenius’ theory ✅
– Brønsted–Lowry theory
Antoine Lavoisier Theory
Antoine Lavoisier proposed that acids were substances containing oxygen showing many
metal oxide oxide formed aicds when dissolved in water. However, this was disproved as
metallic oxides were definitely basic in nature and halogens acids were acidic despite
containing no oxygen
The concept of a 'replaceable hydrogen' is visible when metals react with acid. The metal
replaces the hydrogen ion in the acid and metal salt and hydrogen gas is formed. He also
suggested acids react with base to form salt and water.
However, he failed to explain the properties of acids.
Svante Arrhenious suggested that acids where substances that when ionise in water
produce hydrogen ions and bases were substances that when ionise in water produce
hydroxide ions. He also explained the properties of acids and related acid strength to the
degree of ionisation.
this theory only applied to aqueous medium and could not explain neutralisation
reactions in the gas phase
theory did not explain the important of the role of the solvent
Bronsted Lowry theory states that acids are proton donors and bases are proton
acceptors. Therefore, an acid base reaction involves an exchange of protons from acid to
a base. This theory managed to explain behaviour of amphiprotic substances - substances
that can donate and accept protons.
Bronsted-Lowry Theory allows the reaction between an acid and base to be generalised.
The reaction is considered reversible:
HA + B ⇋ HB+ + A−
For fowards reaction, HA is an acid since it donates proton to base, B. In reverse reaction,
HB+ is an acid that donates proton to base, A-.
The Bronsted Lowry theory gives rise to conjugate acids and bases. When an acid
donates its proton, it becomes its conjugate base. Similarly, when a base accepts a
proton, it becomes its conjugate acid. Conjugate acids and bases differ by one proton
(H+).
Conjugate Acid
In the reaction between an acid and a base, the base accepts a proton (hydrogen ion) and
becomes protonated. As the base is now protonated, it has the potential to donate a
proton and act as an acid. This is called a conjugate acid.
Conjugate Base
In the reaction between an acid and a base, the acid donates a proton (hydrogen gas) and
becomes deprotonated. AS the acid is now deprotonated, it has the potential to accept a
proton and act as a base. This is known as a conjugate base.
A strong acid will have an extremly weak conjugate base. A weak acid will have a
moderately strong conjugate base.
📖 calculate pH, pOH, hydrogen ion concentration ([H+]) and hydroxide ion
✅
concentration ([OH–]) for a range of solutions
Self-ionisation of pure water occurs when water molecules react with each other to a very
small extent. Water displays amphiprotic properties by behaving as a very weak acid and
base to produce one hydronium and hydroxide ion.
In acidic solutions, H3O+ ions are formed by reaction of acid with water and from self-
ionisation of water so concentration of H3O+ ions will be greater than 10− 7 mol/L. Since
Kw remains constant, concentration of OH- ions in an acidic solution must be less than
10− 7 mol/L.
Conversly, for an acidic solution, OH- ions are formed by the reaction of bases with water
and from self ionisation of water so concentration of OH- ions will be greater than 10− 7
mol/L. Since Kw remains constant, concentration of H3O+ ions in an basic solution must
be less than 10− 7 mol/L.
The higher the concentration of H3O+ ions in a solution, the more acidic it is. Similarily, the
higher the concentation of OH- ions in a solution, the more basic it is.
The pH Scale
The pH is a measure of acidity. Since acids produce hydrogen ions during ionisation in
water, pH is a function of hydrogen ion concentration.
pH = −log10 [H3 O + ]
Alternatively
[H3 O + ] = 10 -pH
The pOH is a measure of basicity. Since basic produce hyrodoxide ions during ionisation
in water, pOH is a function of hydroxide ion concentration.
Alternatively
[HO − ] = 10 -pOH
The pOH of a solution decreases as the concentration of hydroxide ions increases. At 25°
C, pOH and pH of a solution are linked through:
pH + pOH = 14
This means that the pOH scale is the reverse relationship of the pH scale. As the pH of a
solution increases, the pOH decreases.
Indicators
One properties of acids and bases is their ability to change colour of certain substances,
called indicators.
📖 write ionic equations to represent the dissociation of acids and bases in water,
conjugate acid/base pairs in solution and amphiprotic nature of some salts, for
example:
Monoprotic Acids
Monoprotic acids are acids that can donate only one proton. E.g. hydrochloric acid,
hydrofluoric acid, nitric acid and ethanoic acid. Only the hydrogen that is part of the highly
polar O-H bond is donated. This hydrogen is called the acidic proton.
Polyprotic Acids
Polyprotic acids are acids that can donate more than one proton from each molecule. The
number of hydrogen ions an acid can donate depends on its structure. Polyprotic acids
donate hydrogen ions in steps when reaction with a base.
Examples of polyprotic acids include diprotic acids - only donate two hydrogen ions such
as sulfuric acid and acarbonic acid or triprotic - only donate 3 hydrogen ions such as
phosphoric acid and boric acid.
Some acids can donate protons more readily than others. Bronsted-Lowry theory defines
the strength of an acid as it ability to donate protons while the strength of a base is a
measure of its ability to accept protons.
The stronger the acid is, the weaker its conjuaget base is. Similarily, the stronger a base
is, the weaker its conjugate acid is.
The difference between a strong and weak acid/base is the degree of ionisation. A strong
acid/base has all of its molecules undergo ionisation to form hydronium/hydroxide ions
while a weak acid/base only has a few of its molecules undergo ionisation.
Acids that readily and easily donate protons are called strong acids. Solutions of strong
acids contains ions with no unreacted acid molecules remaining.
HA + H2 O ⇌ A− + H3 O +
Acids that do not readily and easily donate protons are called weak acids. Solutions of
weak acids contain ions with unreacted acid molcules. Partial dissociation of a weak acid
is shows in an equation using reversible arrows.
A− + H2 O → HA + HO −
Bases that readily and easily accept protons are called strong bases. Solutions of strong
bases contains ions with no unreacted base molecules.
A− + H2 O ⇌ HA + HO −
Bases that do not readily an easily accept protons are called weak bases. Solutions of
weak bases contains ions with uncreated base molecules.
https://www.youtube.com/watch?v=DupXDD87oHc
✅
– strong acid/strong base
Volumetric Analysis
Be inexpensive
Acids: anhydrous sodium carbonate (Na2 CO3 ) and sodium borate (Na2 B4 O7 ⋅
H2 0).
Bases: hydrated oxalic acid (H2 C2 O4 ⋅ H2 O ) and potassium hyrogen phthalate (
KH(C8 H4 O4 )).
The steps for preparing a standard solution include:
Volumetric Flask
A volumetric flask is used to prepare the standard solution. An accurate weighted sample
is placed in the flask and dissolved in distilled water to form a specific volume of solution.
Pipette
A burette contains the titrant which delivers accurately known volumes of solution to the
conical flask containing the acid or base. The volume of liquid delivered by the burette is
called the titre.
It is very important to clean the glass wares above with distilled water and not tap water
since it contains ions and other impurities that can taint results and cause inaccuracies.
Pipettes and burettes should be firts rinsed with distilled water, then given a final rinsing
with the solution they are to contain to minimise dilution as a result of left-over droplets of
water.
Volumetric flask and conical flask should be rinsed with distilled water only and not the
solution they will contain so no unknown additional amounts of thatr solution would be
introduced into the flask.
Performing Titration
To determine the concentration of the analyte, the titrant is slowly added from the burette
to the analyte in the conical flask until equivalence point has been reached. Equivalence
point is when the reactants have both reacted completely as indicated by the mole ratio in
the balanced equation.
In acid-base titration, an indicator that changes colour in the pH range of the equivalence
point is used to indicate when acid and base have completely reacted. The end point is
the point when the indicator changes colour permanently. For accuracy, the end point
should be close to the equivalence point.
The steps to standardize an analyte using a tritration include:
2. A few drops of an appropriate acid-base indicator are added so that a colour change
signals when equivalence point has been reached.
4. The titrant is dispensed slowly into the conical flask from burette until the indicator
changes colour permanently. The final volume of the titrant is noted.
Titration Curves
The titration curve produced when a strong acid is titrated with a strong base is shown
below.
The volume of acid at equivalence point indicates amount of acid needed to completely
react with the base. As further strong acid is added after equivalence point, solution
becomes highly acidic and pH does not change significantly.
The titration curve produced when a strong acid is titrated with a weak base is shown
below.
The graph starts at a lower pH since a weak base is present in the conial flask. As the
strong acid is initially added to the weak base, it causes a significant decrease in pH.
However, as more strong acid is added a sudden pH drop occurs as equivalence point is
reached.
As further strong acid is added after equivalence point, solution becomes highly acidic and
pH does not change significantly.
The titration curve produced when a weak acid is titrated with a strong base is shown
below.
The titration curve produced when a weak acid is titrated with a weak base is shown
below.
The graph starts at a lower pH since a weak base is present in the conial flask. As the
weak acid is initially added to the strong base, it causes a decrease in pH until
equivalence point is reached. There is no clear change in pH at the equivalence point.
As further weak acid is added after the equivalence point, solution becomes slightly acidic
and pH does not change significantly.
Selecting An Indicator
During titration, pH of solution in conical flask changes as standard solution is delivered
from burette. The equivalence point can be detected using an indicator since they have
different colours in acidic and basic solutions.
It is important to select an indicator that changes colour during steep section of pH curve,
so that pH at end point is near the pH at equivalence point. It is generally acceptable to
use:
For more accurate titration, a pH meter attached to a data logger can be used instead of
an indicator.
Conductivity Curves
Conductivity is the ability of a solution to conduct an electric current. Change in
conductivity is mearsured with a conductivity meter and is represented on a conductivity
curve. Shape of graph depends on the strength of base and acid used. Conductivity of a
solution depends on:
identity of ions - as ions size increases conductivity decreases as ions are less mobile.
charge of ions - Strong acids and bases have higher conductivity then weak acids and
bases.
mobility of ions - more mobile ions will have a higher conductivity since they flow
faster.
The conductivity curve produced when a strong acid is titrated with a strong base is shown
below.
Conductivity decreases as H+ and OH- ion react and get replaced by less conductive
cations.
Equivalence point occurs at point with lowest conductivity where cations and anions
ions are present
The conductivity curve produced when a strong acid is titrated with a weak base is shown
below.
Conductivity decreases as H+ and OH- ion react and get replaced by less conductive
cations ions.
Conductivity remains constant since weak base only dissociates to small extent.
The conductivity curve produced when a weak acid is titrated with a strong base is shown
below.
There is low initial conductivity due to low concentration of H+ ions due to partial
dissociation of weak acid
When base is added, initial drop occurs as H+ and H3O+ ions react to form water
molecule.
Then conductivity increases as strong base reacts with unionised weak acid to form
basic salt that disassociates into ions.
Conductivity increases at greater rate as more strong base is added and increasing
OH- concentration.
The conductivity curve produced when a weak acid is titrated with a weak base is shown
below.
When base is added, initial drop occurs as H+ and H3O+ ions react to form water
molecule.
Conductivity increases as weak base reacts with unionised weak acid to form basic
salt that disassociates into ions.
Conductivity remains constant since weak base only dissociates to small extent.
Calculations In Titrations
To calculate the concentration of the analyte using data from titrations you must have:
3. Calculate the amount, in mol, of the analyte that would have reacted with the given
amount, in mol, of the standard solution using mole ratio.
4. Determine the concentration of the analyte using the amount, in mol, that reacted and
the sample volume.
📖 calculate and apply the dissociation constant (Ka) and pKa (pKa = -log10 (Ka)) to
determine the difference between strong and weak acids ✅
Dissociation Of Acids
The equilibrium constant can also be used to describe the dissociation of acids. When an
acid ionises in water, it gives an H + to water which produces a hydronium ion (H3 O + ),
conjugate base.
where:
HA is the acid
A− is the conjugate base
The conjugate base is the acid molecules minus a H + . The degree to which this happens
depends on the strength of the acid. The stronger the acid, the greater the degree of
ionisation, and the more this equilibrium is shifted to the right.
The equilibrium constant for the ionisation of an acid is called the acid dissociation
constant, Ka .
[H3 O + ][A− ]
Ka =
[HA]
The higher the value of Ka , the more the equilibrium is shifted right, which means that
more of the acid ionised, which describes a stronger acid. Thus, a higher Ka means a
stronger acid.
Conversly, the lower the value of Ka , the more the equilibrium is shifted left, which means
that more of the acid is unionised, describing a weak acid. Thus, a lower Ka means a
weaker acid.
Acid Strength
This means that as the acid strength increases, the pKa vlaue decreases and vice versa.
Dissociation Of Bases
The equilibirum constant can also be used to describe the dissociation of bases. When a
base ionises in water, it takes a H + from water which produces hydroxide ions (OH − )
and a conjugate acid.
where:
A− is the base
HA is the conjugate acid
The conjugate acid is the base molecules plus an extra H + . The degree to which this
happens depends on the strength of the base. The stronger the base, the greater the
degree of ionisation, and the more the equilibrium is shifted to the right.
The equilibrium constant for the ionisation of a base is called the base dissociation
constant, Kb .
[OH − ][HA]
Ka =
[A− ]
The higher the value of Kb , the more the equilibrium is shifted right, which means that
more of the base ionised, which describes a stronger base. Thus, a higher Kb means a
stronger base.
Conversly, the lower the value of Kb , the more the equilibrium is shifted left, which means
that more of the base is unionised, describing a weak base. Thus, a lower Kb means a
weaker base.
Base Strength
This means that as the base strength increases, the pKb vlaue decreases and vice versa.
[H3 O + ] = [A− ]
The only source of hydronium ions is from the dissociation of the weak acid and self
ionisation of water does not contribute to concentration of hydronium ions.
[HA]equilibrium = [HA]initial
The fraction of the acid that has dissociated is called the percentage dissociation:
[A− ]
% dissociation = × 100
HA
– in industries
– soft drink
– wine
– juice
– medicine
Wine is a complex mixture of chemicals including acids that contribute to the taste of wine
and fermentation process. Acid-Base titrations are used to determine the acid content of
wine.
Buffers
Buffers are important in the environment and living systems. In medicines, buffers are
used to maintain the stability and effectiveness of the medicine. In food they preserve
flavour and colour, and they are used during the fermentation of wine and in stages of
textile dyeing. Buffers have a role in the maintenance and proper functioning of delicate
chemical processes that can only occur within a narrow pH range.
Buffers solutions are able to resist a change in pH when small amounts of acid or base are
added which is important for processes that require stable and narrow pH ranges.
A buffer consists of a weak conjugate acid-base pair meaning a buffer could be:
A weak acid donates a proton to a base to a limited extent. The acid's conjugate base
contains one less proton than the acid. A weak base accepts a proton from an acid to a
limited extent. The base's conjugate acid contains one more proton then the base. The
conjugate acid-base pair chosen for preparing a buffer helps determmine the pH of the
buffer
A weak acid and its conjugate base gives an acidic buffer solution while a weak base and
its conjugate acid gives a basic Buffer solution. An acidic buffer solution has a pH less
than 7. Acidic buffers can be made from a weak acid and one of its salts. An basic buffer
solution has a pH greater than 7. Basic buffer can be made from a weak base and one of
its salts.
When a strong base is added to a buffer, the hydroxide ions from strong base react with
the weak acid in buffer to produce conjugate base ions which decreases the concentration
of the hydroxide ions. Therefore, when a strong base is added the weak acid combines
with any extra hydroxide ions produced which minimises effect on hydronium ion
concentration maintaing stable pH.
Buffer Capacity
Buffer solutions have a pH range and capacity that determines how much acid/base can
be added before pH changes. The concentration of the buffer influences the effectiveness
of the buffer to resist change in pH.
A buffer is most effective when more HA and A- molecules are present to neutralise
acid/base and when concentrations of HA and A- are equal. Buffer capacity is a measure
of the effectiveness of a buffer solution at resisting change in pH.
The presence of buffer maintains pH values in the body. The carbonic acid buffer system
consist of carbonic acid and hydrogen carbonate ion.
By Le Chatlier's Principle, the system will respond to oppose the change and restore
equilibrium and prevent alkalosis (to high pH) and acidosis (to low pH).