Pekalongan Konjac Machine 2000 KG Per Hour
Pekalongan Konjac Machine 2000 KG Per Hour
Pekalongan Konjac Machine 2000 KG Per Hour
Bubble washing
2 6000x1200x2000 1SET USD23067/SET USD23067
machine
Brush washing
3 2300x850x920 2SET USD5232.7/SET USD10465.4
&peeling machine
Sulfur smoke
7 800x900x1500 2SET USD3225.2/SET USD6450.4
generator
Double spiral
14 powder packaging 400X2730X1800 1SET USD17548.3/SET USD17548.3
machine
We will send engineers to install the line if buyers request. But round-tickets,
Installation
accommodations, USD25.000/person/day will be borne by buyers.
Note This Quotation is based on November 29, 2021 and will be valid for 30 days.
A.Machine(fresh konjak processing capacity:2000kgs/h)
1. Soak conveyor
Instruction
It can soak and feeding the konjak into the brush washing and peeling
Machine.
technical parameters
Introduction
Our air bubble washing machine is mainly used to wash & clean
vegetables, fruits, aquatic product and medicinal materials, such as
dates,palm dates, tomatoes, spinach, celery, cucumber, cabbage, etc. The
whole machine is made by full stainless steel. It is the special machine for
washing & cleaning food.
Parameter
Type:LJBU-6000
Drive power:1.5kw,Fan power:4kw
Water pump power:2.2kw,Lift power:0.55kw
Instruction
It can wash and peeling the konjac.
technical parameters
Dimension:2300*850*920mm,brush roller length 1800mm,total 9 pcs
brush roller,brush is made of high quality nylon yarn,diameter of nylon
yarn 0.7mm.
Drive Power:4kw/380v/50hz.
4. sorting machine
(1) use:It can transport the Allium fistulosum and sorting by manual.
(2) features: sus 304 frame and PVC belt, easy maintenance, easy
cleaning, no rust.
Dimension: 7000*1200*900mm
Power: 0.75KW/380v/50Hz
Introduction
● It can take konjak into the cutting machine.
● The frame and mesh belt are made of stainless steel 304.
● Frame thickness 2mm stainless steel 304.
● drive power:1.5kw/380v/50hz
●dimension:5400*2130*2550mm,Belt width:1800mm
6. cutting machine
Equipment introduction
Parameter
Equipment introduction
Use: to heat and smoke the sulfur, and then connect the air inlet of the
circulating fan through the pipe to blow the sulfur onto the product for color
protection.
heat, so that the sulfur smoke, and then send the smoke to the air inlet of
parameter
gas is controlled by a regulating valve. The hot gas has the material up or
down on the mesh belt. Heat dry and remove moisture. The mesh belt
moves slowly, the operating speed can be adjusted freely according to the
material temperature, and the dried product continuously falls into the
needs, and the number of units can be selected according to the need. The
amount of air, heating temperature, material residence time, and heating
closed, only leaving the openings necessary for the discharge, and the
4. The unique air intake device makes the distribution of hot air more
air circulation fan can make internal heat fully dispersed in every corner
of the interior. Make sure there are no dead ends. Uniform temperature,
b. Air volume controller:When the air temperature in the hot blast stove
is too high, the valve is properly opened, which can replenish fresh air and
need)
d. Moisture control valve:When the air temperature rises, the valve can be
enlarged a little. It can accelerate the discharge of moisture.
III Parameter
Drying machine:
Dimension:21000*7200*3700mm,Mesh belt:1800mm,
container.
Introduction
● It can take konjak into the universal pulverizer.
● The frame is made of stainless steel 304,and the belt is made of PVC.
● Frame thickness 2mm stainless steel 304.
PVC conveyor belts easy to clean up.
● drive power:0.55kw/380v/50hz
●dimension:2000*500*1000mm,PVC belt width400mm
11. Hammer crusher
The stainless steel hammer crusher makes use of the rapid relative motion
between the movable and fixed toothed discs to crush the comminuted
materials through the comprehensive action of tooth impact, friction and
material impact. The structure of the machine is simple, firm, stable
operation and good crushing effect. The comminuted materials can be
directly discharged from the grinding chamber of the main machine, and
the particle size can be obtained by changing the mesh screen with different
aperture. In addition, the machine is made of all stainless steel. The inner
wall of the shell is machined to achieve smooth surface, which makes the
production of drugs, food and chemical industry meet the standards.
Specifications 9FQ42
Spindle speed(r/min) 3800
Bearing specifications 1308
Number of hammers 16
Screen width mm 275
Motor power kw 7.5
Parameter
Introduction
● It can take konjak powder into the packaging machine.
● The frame is made of stainless steel 304
● Frame thickness 2mm stainless steel 304.
● drive power:4kw/380v/50hz
●dimension:3000*800*2000mm
14. Double spiral powder packaging machine
Standard configuration The main scale body (304 stainless steel in contact
with the material), and Control system, 4m
conveyor, sewing machine, folding machine, column
Feeding mode Double speed screw feeding
Bag clamping mode Double cylinder belt bag
Feeding mode Screw conveyor or hoist loading
Weighing range (kg) 25-50
Quantify precision ±0.2%
Weighing speed (package
100-150
/ hour)
Electricity and gas
0.4-0.6mpa compressed air 0.5m3/h
consumption
Scope of application Powder material with less moisture
B.Our company
Zhucheng Lijie Food Machinery Co., Ltd is located in Zhucheng City,
company has 12000 square meters of factory buildings and 1500 square
2. If you need, our technicians will go to your place to help you install and
adjust the machine.
3. Train your workers how to use and maintain the machine in daily use.