Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Sound Attenuator: Featured Standard Construction

    Uploaded by

    Ali Mustafa
    The CSA sound attenuator is designed to provide solutions for noise from HVAC discharge. It uses a galvanized frame and acoustic fibers between perforated metal sheets to absorb sound. Standard models have air widths from 3 to 8 inches and minimum sizes of 11x8 inches, but larger custom sizes can be assembled on site. Performance is tested according to industry standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sound Attenuator: Featured Standard Construction

    Uploaded by

    Ali Mustafa
    39 views2 pages
    The CSA sound attenuator is designed to provide solutions for noise from HVAC discharge. It uses a galvanized frame and acoustic fibers between perforated metal sheets to absorb sound. Standard models have air widths from 3 to 8 inches and minimum sizes of 11x8 inches, but larger custom sizes can be assembled on site. Performance is tested according to industry standards.

    Original Title

    20220823113028

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The CSA sound attenuator is designed to provide solutions for noise from HVAC discharge. It uses a galvanized frame and acoustic fibers between perforated metal sheets to absorb sound. Standard models have air widths from 3 to 8 inches and minimum sizes of 11x8 inches, but larger custom sizes can be assembled on site. Performance is tested according to industry standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    39 views2 pages

    Sound Attenuator: Featured Standard Construction

    Uploaded by

    Ali Mustafa
    The CSA sound attenuator is designed to provide solutions for noise from HVAC discharge. It uses a galvanized frame and acoustic fibers between perforated metal sheets to absorb sound. Standard models have air widths from 3 to 8 inches and minimum sizes of 11x8 inches, but larger custom sizes can be assembled on site. Performance is tested according to industry standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    SOUND ATTENUATOR

    AIR MOVEMENT PRODUCTS


    SQUARE-RECTANGLE
    CSA

    APPLICATION

    CSA, dissipative SOUND ATTENUATOR


    (SILENCER), is designed to provide solutions to all
    HVAC discharge noise with high dynamic insertion
    loss.

    FEATURED STANDARD CONSTRUCTION


    • FRAME:
    -Constructed from 20 gauge galvanized frame, formed with lock seams with mastic
    sealant.
    - The top and bottom of the casing covered with fiber clean liner 1”(25mm) thick
    protected by 22 gauge perforated metal sheet.
    • SPLITTERS:
    - Constructed from 22 gauge galvanized frame.
    - 8”(200mm) wide radiussed at one end to minimize air pressure loss and regenerated
    noise.
    - Filled with acoustic fibers complying with various standards requirements.
    The infill is compressed and contained behind a 22 gauge, 4mm hole diamater
    perforated metal sheet. This protection prevents damage and fiber erosion up to
    5900fpm (30m/s).
    - Clean liner glass fiber as last layer.
    • AIR WIDTH:
    - Varies between 3”(75mm), 4”(100mm), 6”(150mm) & 8”(200mm) depending on
    required insertion loss and pressure drops.
    • SIZES:
    - Minimum size of 11”(275mm)W x 8”(200mm)H
    - Rectangular silencers with weight that exceed 200Kg (441Lbs) are manufactured as
    multiple section and field assembled (By others).

    OPTIONS
    • 18Ga or 16Ga casing & splitters frame.
    • Aluminum Construction
    • Stainless Steel Construction
    • Standard galvanized Duct-mate flange 1-3/8” (35mm) with finished corners for
    Galvanized Construction.
    • Standard Stainless Steel normal duct flange 1-3/8” (35mm) with finished corners.
    for Stainless Construction.
    ACOUSTICAL PERFORMANCE TESTING TESTED AT 400°C FOR 2 HOURS
    WAS PERFORMED BY: TEST WAS PERFORMED BY:
    ETL-INTERTEK-USA APPLUS+ LABORATORIES
    ACCORDANCE TO ASTM E-477

    Page 1/2
    SAP
    www.kbeinternational.com REV:2.0 2021
    ALL STATED SPECIFICATION ARE SUBJECTED TO CHANGE WITHOUT NOTICE OR OBLIGATION Date:17/06/2021
    SOUND ATTENUATOR
    SQUARE-RECTANGLE
    AIR MOVEMENT PRODUCTS
    CSA

    ILLUSTRATIONS

    Fiber Glass
    Density
    64Kg/m3

    Perforated Sheet W

    Clean Liner as
    last layer. H

    22Ga glavanized
    frame with Radiussed
    Shape

    Clean Liner as
    last layer.
    W

    H Perforated Sheet

    Air Width
    20 X

    ACOUSTICAL PERFORMANCE TESTING TESTED AT 400°C FOR 2 HOURS


    WAS PERFORMED BY: TEST WAS PERFORMED BY:
    ETL-INTERTEK-USA APPLUS+ LABORATORIES
    ACCORDANCE TO ASTM E-477

    Page 2/2
    SAP
    www.kbeinternational.com REV:2.0 2021
    ALL STATED SPECIFICATION ARE SUBJECTED TO CHANGE WITHOUT NOTICE OR OBLIGATION Date:17/06/2021

    You might also like