ANT-ATR4518R11v06-1534-001 Datasheet
ANT-ATR4518R11v06-1534-001 Datasheet
ANT-ATR4518R11v06-1534-001 Datasheet
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 960 2 x (1695 - 2690)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable 0 - 10 , continuously adjustable , each band separately
at mid Tilt 16.5 16.7 16.8 17.0 17.1 17.5 17.8 18.2
Gain (dBi)
over all Tilts 16.4 ± 0.4 16.6 ± 0.3 16.7 ± 0.2 16.8 ± 0.4 17.1 ± 0.5 17.5 ± 0.4 17.8 ± 0.5 18.2 ± 0.3
Side lobe suppression for first side
> 17 > 17 > 17 > 17 > 19 > 19 > 19 > 19
lobe above main beam (dB)
Horizontal 3dB beam width (°) 66 ± 1.3 66 ± 1.4 65 ± 1.3 65 ± 1.9 65 ± 4.6 64 ± 4.1 63 ± 3.4 62 ± 4.1
Vertical 3dB beam width (°) 9.0 ± 0.6 8.3 ± 0.4 7.5 ± 0.4 7.2 ± 0.4 7.1 ± 0.5 6.5 ± 0.5 5.8 ± 0.3 5.3 ± 0.2
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 30
Front to back ratio , ± 30° (dB) > 25 > 26 > 27 > 26 > 25 > 27 > 26 > 25
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 18
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2528 x 349 x 166
Packing dimensions (H x W x D) (mm) 2880 x 415 x 245
Antenna weight (kg) 27.4
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 43.1 (included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 920 (at 150 km/h)
Wind load (N) Lateral: 305 (at 150 km/h)
1885
2528
Accessories
Item Model Description Weight Units per antenna
1
ATR4518R11v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
r - Red y - Yellow
L - Left array R - Right array
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2 Issue: 2016-08-15