B1216E Brochure V2
B1216E Brochure V2
B1216E Brochure V2
2 B12/16 | Citizen
Max. rotational speed : 4,500min-1
Max. drilling diameter : φ5mm
Front Spindle
Back Spindle: B12E Max. spindle speed: 12,000min-1
Max. spindle speed: 6,000min-1 When using an RGB: 8,000min-1
B16E type VI tooling example B16E Max. spindle speed: 10,000min-1
Max. drilling diameter : φ5mm
When using an RGB: 8,000min-1
Max. drilling diameter: φ6mm
Front Spindle
Rotary Tools:
B12E Max. spindle speed: 12,000min-1
Max. rotational speed : 4,500min-1-1
When using an RGB: 8,000min
Max. drilling diameter : φ5mm
B16E Max. spindle speed: 10,000min-1
When using an RGB: 8,000min-1
Back
Max.Spindle:
drilling diameter: φ6mm
Max. spindle speed: 6,000min-1
Max. drilling
Rotary diameter :
Tools: φ5mm
Max. rotational speed : 4,500min-1
Max. drilling diameter : φ5mm
Drill Sleeve Holder
This holder can mount four Back Spindle:
B12/16E
drilling tools type
as standard. II Max. spindle speed: 6,000min-1
φ19.05OP and φ20 gauges
Turning tools
are available. :5 10 Max. drilling diameter : φ5mm
Rotary tools on the
gang tool post :2 (3OP)
Front drilling
Drill Sleeve Holdertools :4
This holder can mount four
drilling tools as standard.
Tooling Patterns
φ19.05OP and φ20 gauges
are available.
B12/16E type I B12/16E type II
Turning tools :5 10 (8 tools OP)
Turning tools :5 10
Front drilling tools :4 Rotary tools on the
gang tool post :2 (3OP)
Tooling Patterns Front drilling tools :4
Tooling patterns
B12/16E type I B12/16E type II
Turning tools :5 10 (8 tools OP) Turning tools :5 10
Front drilling tools :4 Rotary tools on the
B12/16E type VI gang tool post :2 (3OP)
Front drilling tools :4
Turning tools :5 10
Rotary tools on the
gang tool post :2 (3OP)
Front drilling tools :4
Back drilling tools :4
B12/16E typeV B12/16E type VI
Turning tools :5 10 (8 tools OP) Turning tools :5 10
Front drilling tools :4 Rotary tools on the
Back drilling tools gang tool post :2 (3OP)
:4
Front drilling tools :4
B12/16E typeV B12/16E type VI
Back drilling tools :4
Turning tools :5 10 (8 tools OP) Turning tools :5 10
Front drilling tools :4 Rotary tools on the
Back drilling tools gang tool post :2 (3OP)
:4
Front drilling tools :4
Back drilling tools :4
B12/16 | Citizen 3
Machine specification
Item B12E B16E Standard accessories
VI(B12E-1F6) VI(B16E-1F6) Main spindle chucking device
Maximum machining diameter (D) 12mm 16mm Back spindle chucking device *only V & VI
Maximum machining length (L) 135 mm/1 chucking (60mm/1 chucking with RGB) Workpiece separator *only I & II
(tap, die) 20mm Coolant device (with level detector)
Spindle through-hole diameter Lubricating oil supply unit (with level detector)
Main spindle speed 12,000min-1 (8,000min-1 with RGB) 10,000min-1 (8,000min-1 with RGB) 2 Gang rotary tool driving devices *only II & VI
Spindle speed of the gang rotary tool 4,500min-1 4,500min-1 Machine relocation detector
Max. chuck diameter of back spindle 12mm 16mm Door lock function
Max. protrusion length of the
back spindle workpiece 30mm 30mm Special accessories
Maximum protrusion length 135mm 135mm Fixed guide bushing device
Back spindle speed 6,000min-1 6,000min-1 Rotary guide bushing device
Number of tools to be mounted 15 15 Coolant flow rate detector
Turning tools on the gang tool post 5 5 Signal lamp
Cross rotary tools 2 (3OP) 2 (3OP) Lighting
Tools for front drilling 4 4 End-face rigid tapping device *only I & II
Tools for back drilling 4 4 Back spindle long workpiece
Tool size device *only V & VI
Tool (gang tool post) 10×120mm or 60mm Knock-out jig for through-hole
Sleeve 20mm (19.05mmOP) workpiece *only V & VI
Chuck and bushing
Main spindle collet chuck F16 F20 Standard NC functions
Back spindle collet chuck F16 F20 NC unit dedicated to the B1216E series
Rotary tool collet chuck ER8 ER8 8.4 inch colour liquid crystal display (LCD)
Chuck for drill sleeves ER8、ER11 Operating time display
Guide bushing B212 B238 Preparation functions
Rapid feed rate Main spindle speed change detector
X and Y axes 21m/min Corner chamfering/ rounding function
Z axis 15m/min Canned drilling cycle
A2 axis 15m/min 15m/min Nose R compensation function
Motors Direct input of on-drawing dimensions
Spindle drive 2.2/3.7kW Main spindle constant surface speed control
Tool spindle drive 0.5kW 0.5kW Program storage capacity : 40m (approx.16KB)
Back spindle drive 1.0kW 1.0kW Tool offset pairs : 64 pairs
Coolant oil 0.18kW Product counter indication (up to 8 digits)
Centre height 1000mm Automatic power-off function
Rated power consumption 5.2kVA 5.2kVA Multiple repetitive cycle
Full-load current 20A 20A User macro
Main braker capacity 30A Continuous threading function
Air pressure and air flow rate for On-machine program check function
pneumatic devices 0.5MPa-30Nl/min (Max.50Nl/min) Program prior analysis function
Weight 1150kg 1150kg
Special NC functions
Program strage capacity 2500m (approx.1MB)
Sub-micron command function
Front end-face rigid tapping function
Tool spindle rigid tapping function *only II & VI
Tool spindle end-face rigid tapping
function *only I & II
Hobbing and polygon machining
function (A) *only I & II
Hobbing and polygon machining
function (B) *only II & VI
Front-back simultaneously machining
function *only V & VI
Main spindle indexing at 1ºintervals *only II & VI
Simplified Z-A2 axes synchronization
function *only V & VI
Tool life management