Medd Komite Sortert

NYE NORMER FRA IEC OG CENELEC, SAMT
CENELEC-FORSLAG FOR VOTERING

Sortert etter Utarbeidende Komite
IECEE CB-109C:2005
Adherence to IEC Standards - Product Category: EMC
CLC/JWG-EMC prEN 50471:2005

Electromagnetic compatibility (EMC) - Product family emission standard for wire-line
telecommunication networks
Voteringsfrist: 2005-12-09
IEC/TC2 NEK EN 60034-3:2005

Rotating electrical machines -- Part 3: Specific requirements for cylindrical rotor
synchronous machines
IEC/TC2 NEK EN 60034-9:2005

Rotating electrical machines -- Part 9: Noise limits
IEC/TC3 IEC 61175:2005

Industrial systems, installations and equipment and industrial products - Designation of
signals
IEC/TC3 IEC/PAS 61906:2005

Procedure for the declaration of materials in products of the electrotechnical and electronic
industry

Structuring principles for technical products and technical product documentation - Letter
codes - Main classes and subclasses of objects according to their purpose and task
IEC/SC3D NEK EN 61360-4:2005

Standard data element types with associated classification sheme for electric components --
Part 4: IEC reference collection of standard data element types and component classes
IEC/TC4 NEK EN 60308:2005

Hydraulic turbines - Testing of control systems
CLC/TC8X prEN 50160:2005

Voltage characteristics of electricity supplied by public distribution systems
IEC/TC9 IEC 61287-1:2005

Railway applications - Power convertors installed on board rolling stock - Part 1:
Characteristics and test methods
CLC/SC9XA CLC/TS 50459-1:2005

Railway applications - Communication, signalling and processing systems - European Rail
Traffic Management System - Driver-Machine Interface -- Part 1: Ergonomic principles for
the presentation of ERTMS/ETCS/GSM-R information

Traffic Management System - Driver-Machine Interface -- Part 2: Ergonomic arrangements
of ERTMS/ETCS information

Traffic Management System - Driver-Machine Interface -- Part 3: Ergonomic arrangements
of ERTMS/GSM-R information
NEK Meddelelser Nr. 114 - November 2005 Side 1

Traffic Management System - Driver-Machine Interface -- Part 4: Data entry for the
ERTMS/ETCS/GSM-R systems

Traffic Management System - Driver-Machine Interface -- Part 5: Symbols

Traffic Management System - Driver-Machine Interface -- Part 6: Audible information
CLC/SC9XB prEN 50405:2005

Railway applications - Current collection systems - Pantographs, testing methods for carbon
contact strips
CLC/SC9XC NEK EN 50388:2005

Railway applications - Power supply and rolling stock - Technical criteria for the coordination
between power supply (substation) and rolling stock to achieve interoperability
IEC/TC10 NEK EN 60376:2005

Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
IEC/TC10 NEK EN 60836:2005

Specifications for unused silicone insulating liquids for electrotechnical purposes
IEC/TC10 IEC 60376:2005

Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
IEC/TC10 IEC 60567:2005

Oil-filled electrical equipment - Sampling of gases and of oil for analysis of free and
dissolved gases - Guidance
IEC/TC10 IEC 60836:2005

Specifications for unused silicone insulating liquids for electrotechnical purposes
IEC/TC10 prEN 61181:2005

Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory
tests on electrical equipment
CLC/TC13 prEN 50470-1:2005

Electricity metering equipment (a.c.) -- Part 1: General requirements, tests and test
conditions - Metering equipment (class indexes A, B and C)
CLC/TC13 prEN 50470-2:2005

Electricity metering equipment (a.c.) -- Part 2: Particular requirements - Electromechanical
meters for active energy (class indexes A and B)
CLC/TC13 prEN 50470-3:2005

Electricity metering equipment (a.c.) -- Part 3: Particular requirements - Static meters for
active energy (class indexes A, B and C)
IEC/TC13 IEC 62053-52:2005

Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols
IEC/TC13 IEC 62055-21:2005

Electricity metering - Payment systems - Part 21: Framework for standardization
IEC/TC13 IEC 62055-31:2005

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment
meters for active energy (classes 1 and 2)
CLC/TC14 NEK EN 50216-8:2005

Power transformer and reactor fittings -- Part 8: Butterfly valves for insulating liquid circuits

IEC/TC14 IEC 60076-10:2005
Power transformers - Part 10: Determination of sound levels
IEC/TC14 IEC 60076-SER:2005

Power transformers - ALL PARTS
IEC/TC15 prEN 60454-3-4:2005

Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for
individual materials -- Sheet 4: Requirements for cellulose paper, creped and non-creped,
with rubber thermosetting adhesive
IEC/TC15 prEN 60454-3-11:2005

"Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for
individual materials -- Sheet 11: Polyester film combinations with glass filament; - creped
cellulosic paper non-woven; epoxy and pressure-sensitive adhesives"
IEC/TC15 prEN 60455-3-5:2005

Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for
individual materials -- Sheet 5: Unsaturated polyester based impregnating resins
IEC/TC15 prEN 60684-3-211:2005

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet
211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
IEC/TC15 prEN 60684-3-246:2005

246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded
IEC/TC15 prEN 60684-3-248:2005

248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink
ratios 2:1, 3:1, 4:1
IEC/SC15C NEK EN 60684-3-216:2005

216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
IEC/SC15E prEN 60216-3:2005

Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions for
calculating thermal endurance characteristics
IEC/TC16 prEN 60445:2005

Basic and safety principles for man-machine interface, marking and identification -
Identification of equipment terminals and of terminations of certain designated conductors,
including general rules for an alphanumeric system
IEC/SC17A IEC 62271-107:2005

High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-
switchers for rated voltages above 1 kV up to and including 52 kV
IEC/SC17A IEC 62271-110:2005

High-voltage switchgear and controlgear - Part 110: Inductive load switching
IEC/SC17B IEC 60947-3:2005

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination units
IEC/SC17B IEC 60947-6-1:2005

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer
switching equipment

IEC/SC18A IEC 60092-352:2005
Electrical installations in ships - Part 352: Choice and installation of electrical cables
CLC/TC20 prEN 50200:2005

Method of test for resistance to fire of unprotected small cables for use in emergency circuits
CLC/TC20 prEN 50264-1:2005

Railway applications - Railway rolling stock power and control cables having special fire
performance -- Part 1: General requirements
CLC/TC20 prEN 50264-2-1:2005

performance -- Part 2-1: Cables with crosslinked elastomeric insulation - Single core cables
CLC/TC20 prEN 50264-2-2:2005

performance -- Part 2-2: Cables with crosslinked elastomeric insulation - Multicore cables
CLC/TC20 prEN 50264-3-1:2005

performance -- Part 3-1: Cables with crosslinked elastomeric insulation with reduced
dimensions - Single core cables
CLC/TC20 prEN 50264-3-2:2005

performance -- Part 3-2: Cables with crosslinked elastomeric insulation with reduced
dimensions - Multicore cables
CLC/TC20 NEK EN 50395:2005

Electrical test methods for low voltage energy cables
CLC/TC20 NEK EN 50396:2005

Non electrical test methods for low voltage energy cables
CLC/TC20 prEN 50414:2005

Test methods of analysis of lead in PVC taken from insulation and sheath of electric and
optical fibre cables - Method A: Total lead content determination with flame excitation atomic
absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining
IEC/TC20 IEC 60055-1:2005

Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or
aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on
cables and their accessories
IEC/TC20 NEK EN 61034-1:2005

Measurement of smoke density of cables burning under defined conditions -- Part 1: Test
apparatus
IEC/TC20 NEK EN 61034-2:2005

Measurement of smoke density of cables burning under defined conditions -- Part 2: Test
procedure and requirements
IEC/TC20 IEC 61034-1:2005

Measurement of smoke density of cables burning under defined conditions - Part 1: Test
apparatus
IEC/TC20 IEC 61034-2:2005

Measurement of smoke density of cables burning under defined conditions - Part 2: Test
procedure and requirements

IEC/TC20 IEC 61901:2005
Development tests recommended on cables with a longitudinally applied metal foil for rated
voltages above 30 kV (Um = 36 kV)
CLC/TC20 prHD 631.1 S2:2005

Electric cables - Accessories - Material characterisation -- Part 1: Fingerprinting and type
tests for resinous compounds
CLC/TC20 prHD 631.2 S1:2005

Electric cables - Accessories - Material characterization -- Part 2: Fingerprinting and type
tests for heat shrinkable components for low voltage applications
IEC/TC21 NEK EN 60254-1:2005

Lead acid traction batteries -- Part 1: General requirements and methods of tests
IEC/TC21 NEK EN 61427:2005

Secondary cells and batteries for photovoltaic energy systems (PVES) - General
requirements and methods of test
IEC/TC21 IEC 61427:2005

Secondary cells and batteries for photovoltaic energy systems (PVES) - General
requirements and methods of test
CLC/TC21X prEN 50272-4:2005

Safety requirements for secondary batteries and battery installations -- Part 4: Batteries for
use in portable appliances
IEC/SC22H prEN 62310-2:2005

Static Transfer Systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements
IEC/SC23A prEN 61534-21:2005

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for
wall and ceiling mounting
CLC/TC23B NEK EN 50428:2005

Switches for household and similar fixed electrical installations - Collateral standard -
Switches and related accessories for use in home and building electronic systems (HBES)
IEC/SC23B prEN 60669-2-2:2005

Switches for household and similar fixed electrical installations -- Part 2-2: Particular
requirements - Electromagnetic remote-control switches (RCS)
IEC/SC23B prEN 60669-2-3:2005

Switches for household and similar fixed electrical installations -- Part 2-3: Particular
requirements - Time-delay switches (TDS)
IEC/SC23F NEK EN 60998-2-4:2005

Connecting devices for low voltage circuits for household and similar purposes -- Part 2-4:
Particular requirements for twist-on connecting devices
IEC/SC23H prEN 60309-4:2005

Plugs, socket-outlets and couplers for industrial purposes -- Part 4: Switched socket-outlet
and connector, with or without interlock
IEC/SC23J NEK EN 61058-2-4:2005

Switches for appliances -- Part 2-4: Particular requirements for independently mounted
switches
IEC/TC25 prEN 60027-6:2005

Letter symbols to be used in elecrical technology -- Part 6: Control technology

IEC/TC25 IEC 60027-2:2005
Letter symbols to be used in electrical technology - Part 2: Telecommunications and
electronics
IEC/TC26 NEK EN 60974-12:2005

Arc welding equipment -- Part 12: Coupling devices for welding cables
IEC/TC26 IEC 60974-1:2005

Arc welding equipment - Part 1: Welding power sources
IEC/TC26 IEC 60974-2:2005

Arc welding equipment - Part 2: Liquid cooling systems
IEC/TC26 IEC 60974-7:2005

Arc welding equipment - Part 7: Torches
IEC/TC26 IEC 60974-12:2005

Arc welding equipment - Part 12: Coupling devices for welding cables
IEC/TC27 NEK EN 60239:2005

Graphite electrodes for electric arc furnaces - Dimensions and designation
IEC/TC27 NEK EN 60519-3:2005

Safety in electroheat installations -- Part 3: Particular requirements for induction and
conduction heating and induction melting installations
IEC/TC27 NEK EN 60519-8:2005

Safety in electroheat installations -- Part 8: Particular requirements for electroslag remelting
furnaces
IEC/TC27 NEK EN 60519-10:2005

Safety in electroheat installations -- Part 10: Particular requirements for electrical resistance
trace heating systems for industrial and commercial applications
IEC/TC27 IEC 60239:2005

Graphite electrodes for electric arc furnaces - Dimensions and designation
IEC/TC27 IEC 60519-8:2005

Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting
furnaces
IEC/TC27 IEC 60519-9:2005

Safety in electroheat installations - Part 9: Particular requirements for high-frequency
dielectric heating installations
IEC/TC27 IEC 60519-10:2005

Safety in electroheat installations - Part 10: Particular requirements for electrical resistance
trace heating systems for industrial and commercial applications
IEC/TC27 IEC 60779:2005

Industrial electroheat equipment - Test methods for electroslag remelting furnaces
IEC/TC29 NEK EN 60118-13:2005

Electroacoustics - Hearing aids -- Part 13: Electromagnetic compatibility (EMC)
IEC/TC31 IEC Ex TR 60079-15:2005

IECEx Test Report for IEC 60079-15 (2005) ed 3.0 - Electrical apparatus for explosive gas
atmospheres - Part 15: Construction, test and marking of type of protection ""n"" electrical
apparatus
IEC/TC31 IEC Ex TR 60079-18:2005

IECEx Test Report for IEC 60079-18 (2004) ed 2.0 - Electrical apparatus for explosive gas
atmospheres - Part 18: Construction, test and marking of type of protection encapsulation
""m"" electrical apparatus
IEC/TC31 NEK EN 62086-1:2005

Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating --
Part 1: General and testing requirements

IEC/TC31 prEN 62086-1:2005
Part 1: General and testing requirements
IEC/TC31 prEN 62086-2:2005

Part 2: Application guide for design, installation and maintenance
IEC/TC31 NEK EN 62086-2:2005

Part 2: Application guide for design, installation and maintenance
CLC/SC31-9 NEK EN 50402:2005

Electrical apparatus for the detection and measurement of combustible or toxic gases or
vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
IEC/SC31H NEK EN 61241-17:2005

Electrical apparatus for use in the presence of combustible dust -- Part 17: Inspection and
maintenance of electrical installations in hazardous areas (other than mines)
IEC/SC32B prEN 60269-1:2005

Low-voltage fuses -- Part 1: General requirements
IEC/SC32B prHD 60269-2:2005

Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized
persons (fuses mainly for industrial application) - Examples of standardized systems of
fuses A to I
IEC/SC32B NEK HD 60269-2-1:2005

Low-voltage fuses -- Part 2-1: Supplementary requirements for fuses for use by authorized
persons (fuses mainly for industrial application) -- Sections I to VI: Examples of types of
standardized fuses - I Norge er seksjon I normert
IEC/SC32B prHD 60269-3:2005

Low-voltage fuses -- Part 3: Supplementary requirements for fuses for use by unskilled
persons (fuses mainly for household or similar applications) - Examples of standardized
systems of fuses A to F
IEC/SC32B prEN 60269-4:2005

Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of
semiconductor devices
IEC/TC33 IEC 60871-1:2005

Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 1:
General
IEC/SC34A IEC 60064:2005

Tungsten filament lamps for domestic and similar general lighting purposes - Performance
requirements
IEC/SC34A IEC 60432-1:2005

Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic
and similar general lighting purposes
IEC/SC34A IEC 60432-2:2005

Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic
and similar general lighting purposes
IEC/SC34A IEC 60432-3:2005

Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
IEC/SC34A IEC 60630:2005

Maximum lamp outlines for incandescent lamps

IEC/SC34A IEC 60983:2005
Miniature lamps
IEC/SC34A IEC 61549:2005

Miscellaneous lamps
IEC/SC34B IEC 60061-DB-12M:2005

Lamp caps and holders together with gauges for the control of interchangeability and safety-
12-month subscription to online database comprising all parts of IEC 60061.
IEC/SC34C prEN 60929:2005

AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
IEC/SC34C IEC 60923:2005

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) -
Performance requirements
IEC/SC34C IEC 61347-2-12:2005

Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic
ballasts for discharge lamps (excluding fluorescent lamps)
IEC/SC34D NEK EN 60598-2-11:2005

Luminaires -- Part 2-11: Particular requirements - Aquarium luminaires
Skal brukes sammen med seneste utgave av NEK EN 60598-1 og dennes amendments
IEC/SC34D IEC 60598-2-11:2005

Luminaires - Part 2-11: Particular requirements - Aquarium luminaires
IEC/TC35 prEN 60086-1:2005

Primary batteries - Part 1: General
IEC/TC35 prEN 60086-2:2005

Primary batteries - Part 2: Physical and electrical specifications
IEC/TC35 NEK EN 60086-5:2005

Primary batteries -- Part 5: Safety of batteries with aqueous electrolyte
IEC/TC35 IEC 60086-5:2005

Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
IEC/SC36C prEN 61462:2005

Composite insulators - Hollow pressurized and unpressurized insulators for use in electrical
equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance
criteria and design recommendations
IEC/TC40 NEK EN 60062:2005

Marking codes for resistors and capacitors
IEC/TC40 prEN 60286-3:2005

Packing of components for automatic handling -- Part 3: Packing of surface mount
components on continuous tapes
IEC/TC40 prEN 60384-3:2005

Fixed capacitors for use in electronic equipment -- Part 3: Sectional specification: Surface
mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
IEC/TC40 prEN 60384-3-1:2005

Fixed capacitors for use in electronic equipment -- Part 3-1: Blank detail specification:
Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid
electrolyte - Assessment level EZ

IEC/TC40 NEK EN 60384-8:2005
Fixed capacitors for use in electronic equipment -- Part 8: Sectional specification: Fixed
capacitors of ceramic dielectric, Class 1
IEC/TC40 NEK EN 60384-8-1:2005

Fixed capacitors for use in electronic equipment -- Part 8-1: Blank detail specification: Fixed
capacitors of ceramic dielectric, Class 1 - Assessment level EZ
IEC/TC40 NEK EN 60384-9:2005

IEC/TC40 NEK EN 60384-9-1:2005

Fixed capacitors for use in electronic equipment -- Part 9-1: Blank detail specification: Fixed
IEC/TC40 prEN 60384-13:2005

Fixed capacitors for use in electronic equipment -- Part 13: Sectional specification - Fixed
polypropylene film dielectric metal foil d.c. capacitors
IEC/TC40 prEN 60384-13-1:2005

Fixed capacitors for use in electronic equipment -- Part 13-1: Blank detail specification -
Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E
IEC/TC40 NEK EN 60384-14:2005

Fixed capacitors for use in electronic equipment -- Part 14: Sectional specification - Fixed
capacitors for electromagnetic interference suppression and connection to the supply mains
IEC/TC40 NEK EN 60384-14-1:2005

Fixed capacitors for use in electronic equipment -- Part 14-1: Blank detail specification -
Fixed capacitors for electromagnetic interference suppression and connection to the supply
mains - Assessment level D
IEC/TC40 prEN 60384-19:2005

metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
IEC/TC40 prEN 60384-19-1:2005

Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors -
Assessment level EZ
IEC/TC40 prEN 60384-24:2005

mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
IEC/TC40 prEN 60384-24-1:2005

Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid
IEC/TC40 prEN 60384-25:2005

mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
IEC/TC40 prEN 60384-25-1:2005

Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid

IEC/TC40 IEC 60384-6:2005
Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed
metallized polycarbonate film dielectric d.c. capacitors
IEC/TC40 IEC 60384-6-1:2005

Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification: Fixed
metallized polycarbonate film dielectric d.c. capacitors - Assessment level E
IEC/TC40 IEC 60384-8:2005

Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed
IEC/TC40 IEC 60384-8-1:2005

IEC/TC40 IEC 60384-9:2005

IEC/TC40 IEC 60384-9-1:2005

IEC/TC40 IEC 60384-14:2005

IEC/TC40 IEC 60384-14-1:2005

- Assessment level D
CLC/TC40XA NEK CECC 30801-802:2005

Detail Specification: Fixed tantalum surface mount capacitors with solid electrolyte and
porous anode: Extended range
IEC/TC44 CLC/TS 62046:2005

Safety of machinery - Application of protective equipment to detect the presence of persons
IEC/SC46A IEC 61196-1:2005

Coaxial communication cables - Part 1: Generic specification - General, definitions and
requirements
IEC/SC46A IEC 61196-1-102:2005

Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation
resistance of cable dielectric
IEC/SC46A IEC 61196-1-103:2005

Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of
cable
IEC/SC46A IEC 61196-1-105:2005

Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand
voltage of cable dielectric
IEC/SC46A IEC 61196-1-107:2005

Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable
microphony charge level (mechanically induced noise)
IEC/SC46A IEC 61196-1-111:2005

Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of
phase constant
IEC/SC46A IEC 61196-1-206:2005

Coaxial communication cables - Part 1-206: Environmental test methods - Climatic
sequence

IEC/SC46A IEC 61196-1-308:2005
Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile
strength and elongation for copper-clad metals
IEC/SC46A IEC 61196-1-310:2005

Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion
characteristics of copper-clad metals
IEC/SC46A IEC 61935-1:2005

Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1:
Installed cabling
IEC/SC46A IEC 61935-2:2005

Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2:
Patch cords and work area cords
IEC/SC46C IEC 60708:2005

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
IEC/SC46C IEC 62255-2:2005

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit
rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled
cables - Sectional specification
IEC/SC46C IEC 62255-2-1:2005

rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled
cables - Blank detail specification
IEC/SC46C IEC 62255-3:2005

rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled
IEC/SC46C IEC 62255-3-1:2005

rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled
cables - Blank detail specification
IEC/SC46C IEC 62255-4:2005

rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop
IEC/SC46C IEC 62255-4-1:2005

rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial
drop cables - Blank detail specification
IEC/SC46C IEC 62255-5:2005

rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop
IEC/SC46C IEC 62255-5-1:2005

rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled
drop cables - Blank detail specification
IEC/SC46F NEK EN 61169-29:2005

Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency
coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel
applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 ohms and 75 ohms
applications

IEC/SC46F IEC 61169-29:2005
Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency
coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel
applications) - Characteristic impedance 50 Ω (type 1,0/2,3) - 50 Ω and 75
Ω applications
IEC/SC46F IEC/PAS 62431:2005

Measurement methods for reflectivity of electromagnetic wave absorbers in millimetre wave
frequency
CLC/TC46X NEK EN 50289-1-12:2005

Communication cables - Specifications for test methods -- Part 1-12: Electrical test methods
- Inductance
CLC/SC46XA NEK EN 50117-2-1:2005

Coaxial cables -- Part 2-1: Sectional specification for cables used in cabled distribution
networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
CLC/SC46XC NEK EN 50288-7:2005

Multi-element metallic cables used in analogue and digital communication and control --
Part 7: Sectional specification for instrumentation and control cables
IEC/TC47 prEN 60749-35:2005

Semiconductor devices - Mechanical and climatic test methods -- Part 35: Acoustic
microscopy for plastic encapsulated electronic components
IEC/TC47 prEN 60749-39:2005

Semiconductor devices - Mechanical and climatic test methods -- Part 39: Measurement of
moisture diffusivity and water solublity in organic materials used for semiconductor
components
IEC/TC47 NEK EN 62258-2:2005

Semiconductor die products -- Part 2: Exchange data formats
IEC/TC47 prEN 62258-5:2005

Semiconductor die products -- Part 5: Requirements for information concerning electrical
simulation
IEC/TC47 prEN 62258-6:2005

Semiconductor die products -- Part 5: Requirements for information concerning thermal
simulation
IEC/TC47 prEN 62374:2005

Time dependent dielectric breakdown test (TDDB)
IEC/TC47 IEC 62047-1:2005

Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions
IEC/TC47 IEC 62258-1:2005

Semiconductor die products - Part 1: Requirements for procurement and use
IEC/TC47 IEC 62258-2:2005

Semiconductor die products - Part 2: Exchange data formats
IEC/TC47 IEC 62258-3:2005

Semiconductor die products - Part 3: Recommendations for good practice in handling,
packing and storage

Electronic components - Long-duration storage of electronic components - Guidance for
implementation

IEC/SC47A IEC 61967-2:2005
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2:
Measurement of radiated emissions - TEM cell and wideband TEM cell method
IEC/SC47A IEC 61967-3:2005

Integrated circuits - Measurement of electromagnetic emissions, 150 KHz to 1 GHz - Part 3:
Measurement of radiated emissions - Surface scan method
IEC/SC47A prEN 62132-1:2005

Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz -- Part 1:
General conditions and definitions
IEC/SC47A prEN 62132-4:2005

Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz -- Part 4:
Direct RF power injection method
IEC/SC47D prEN 60191-1:2005

Mechanical standardization of semiconductor devices -- Part 1: General rules for the
preparation of outline drawings of discrete devices
IEC/SC47E IEC 60747-7-5:2005

Semiconductor devices - Discrete devices - Part 7-5: Bipolar transistors for power switching
applications
IEC/SC48B prEN 61076-3-105:2005

Connectors for electronic equipment -- Part 3-105: Detail specification for 4 pair balanced,
individually shielded, fixed and free connectors with a characteristic impedance of 100
ohms, covering a frequency range from DC to 1 500 MHz
IEC/SC48B IEC 61076-3-103:2005

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail
specification for single row connectors with non-removable ribbon cable contacts on 1,25
mm pitch used for high speed serial data (HSSDC)
IEC/SC48D NEK EN 62194:2005

Method of evaluating the thermal performance of enclosures
IEC/SC48D IEC 62194:2005

Method of evaluating the thermal performance of enclosures
IEC/TC49 prEN 60444-9:2005

Measurement of piezoelectric crystal unit parameters -- Part 9: Measurement of spurious
resonances of piezoelectric crystal units
IEC/TC49 prEN 60679-1:2005

Quartz crystal controlled oscillators of assessed quality -- Part 1: Generic specification
IEC/TC49 NEK EN 61019-2:2005

Surface acoustic wave (SAW) resonators -- Part 2: Guide to the use
IEC/TC49 NEK EN 61338-4:2005

Waveguide type dielectric resonators -- Part 4: Sectional specification
IEC/TC49 NEK EN 61338-4-1:2005

Waveguide type dielectric resonators -- Part 4-1: Blank detail specification
IEC/TC49 IEC 61019-2:2005

Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
IEC/TC49 IEC 61994-4-4:2005

Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4:
Materials - Materials for Surface Acoustic Wave (SAW) devices

IEC/TC49 IEC 62276:2005
Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications
and measuring methods
IEC/TC51 NEK EN 60740-1:2005

Laminations for transformers and inductors -- Part 1: Mechanical and electrical
characteristics
IEC/TC51 IEC 60740-1:2005

Laminations for transformers and inductors - Part 1: Mechanical and electrical
characteristics
IEC/TC51 NEK EN 61185:2005

Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions
IEC/TC51 NEK EN 61605:2005

Fixed inductors for use in electronic and telecommunication equipment - Marking codes
IEC/TC51 IEC 61185:2005

Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions
IEC/TC51 IEC 61332:2005

Soft ferrite material classification
IEC/TC51 IEC 61605:2005

Fixed inductors for use in electronic and telecommunication equipment - Marking codes
IEC/TC51 NEK EN 62044-2:2005

Cores made of soft magnetic materials - Measuring methods -- Part 2: Magnetic properties
at low excitation level
IEC/TC51 prEN 62317-8:2005

Ferrite cores - Dimensions -- Part 8: E-cores
IEC/TC51 NEK EN 62323:2005

Dimensions of half pot-cores made of ferrite for inductive proximity switches
IEC/TC51 IEC 62317-4:2005

Ferrite cores - Dimensions - Part 4: RM-cores and associated parts
IEC/TC51 IEC 62317-7:2005

Ferrite cores - Dimensions - Part 7: EER-cores
IEC/TC51 IEC 62323:2005

Dimensions of half pot-cores made of ferrite for inductive proximity switches
IEC/TC55 prEN 60317-55:2005

Specifications for particular types of winding wires -- Part 55: Solderable polyurethane
enamelled round copper wire overcoated with polyamide, Class 180
IEC/TC55 IEC 60317-11:2005

Specifications for particular types of winding wires - Part 11: Bunched solderable
polyurethane enamelled round copper wires, class 130, with silk covering
IEC/TC56 prEN 60812:2005

Analysis techniques for system reliability - Procedure for failure mode and effects analysis
(FMEA)
IEC/TC56 IEC 60300-3-3:2005

Dependability management - Part 3-3: Application guide - Life cycle costing
IEC/TC56 prEN 61078:2005

Analysis techniques for dependability - Reliability block diagram and Boolean methods

IEC/TC56 IEC 61160:2005
Design review
IEC/TC57 IEC 60870-6-802:2005

Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO
standards and ITU-T recommendations - TASE.2 Object models
IEC/TC57 NEK EN 61850-10:2005

Communication networks and systems in substations -- Part 10: Conformance testing
IEC/TC57 CLC/TS 61970-2:2005

Energy management system application program interface (EMS-API) -- Part 2: Glossary
IEC/TC57 IEC 61850-10:2005

Communication networks and systems in substations - Part 10: Conformance testing
IEC/TC57 IEC 61970-401:2005

Energy management system application program interface (EMS-API) - Part 401:
Component interface specification (CIS) framework
IEC/TC59 IEC 62301:2005

Household electrical appliances - Measurement of standby power
IEC/SC59A IEC 60704-2-3:2005

Household and similar electrical appliances - Test code for the determination of airborne
aocustical noise - Part 2-3: Particular requirements for dishwashers
IEC/SC59C IEC 60704-2-5:2005

Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Part 2-5: Particular requirements for electric thermal storage room
heaters
IEC/SC59D NEK EN 61121:2005

Tumble dryers for household use - Methods for measuring the performance
IEC/TC59D IEC 61121:2005

Tumble dryers for household use - Methods for measuring the performance
IEC/SC59F prEN 60312:2005

Vacuum cleaners for household use - Methods for determination of dust emission in vacuum
cleaners
IEC/SC59K IEC 60350:2005

Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring
performance

Efficiency of domestic electrical storage water heaters
IEC/TC61 prEN 60335-2-102:2005

Household and similar electrical appliances - Safety -- Part 2-102: Particular requirements
for gas, oil and solid-fuel burning appliances having electrical connections
IEC/TC61 IEC 60335-2-6:2005

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for
stationary cooking ranges, hobs, ovens and similar appliances
IEC/TC61 IEC 60335-2-8:2005

shavers, hair clippers and similar appliances
IEC/TC61 IEC 60335-2-9:2005

grills, toasters and similar portable cooking appliances

IEC/TC61 IEC 60335-2-10:2005
floor treatment machines and wet scrubbing machines
IEC/TC61 IEC 60335-2-12:2005

warming plates and similar appliances
IEC/TC61 IEC 60335-2-13:2005

deep fat fryers, frying pans and similar appliances
IEC/TC61 IEC 60335-2-14:2005

kitchen machines
IEC/TC61 IEC 60335-2-16:2005

food waste disposers
IEC/TC61 IEC 60335-2-23:2005

appliances for skin or hair care
IEC/TC61 IEC 60335-2-28:2005

sewing machines
IEC/TC61 IEC 60335-2-32:2005

massage appliances
IEC/TC61 IEC 60335-2-41:2005

pumps
IEC/TC61 IEC 60335-2-45:2005

portable heating tools and similar appliances
IEC/TC61 IEC 60335-2-51:2005

stationary circulation pumps for heating and service water installations
IEC/TC61 IEC 60335-2-53:2005

sauna heating appliances
IEC/TC61 IEC 60335-2-54:2005

surface-cleaning appliances for household use employing liquids or steam
IEC/TC61 IEC 60335-2-61:2005

thermal storage room heaters
IEC/TC61 IEC 60335-2-65:2005

air-cleaning appliances
IEC/TC61 IEC 60335-2-82:2005

amusement machines and personal service machines
IEC/TC61 IEC 60335-2-84:2005

toilets

IEC/TC61 IEC 60335-2-96:2005
flexible sheet heating elements for room heating
IEC/TC61 NEK EN 62115:2005

Electric toys - Safety
IEC/SC61B IEC 60335-2-25:2005

microwave ovens, including combination microwave ovens
IEC/SC61C IEC 60335-2-24:2005

refrigerating appliances, ice-cream appliances and ice-makers
IEC/SC61C IEC 60335-2-89:2005

commercial refrigerating appliances with an incorporated or remote refrigerant condensing
unit or compressor
IEC/SC61D IEC 60335-2-40:2005

electrical heat pumps, air conditioners and dehumidifiers
IEC/SC61E IEC 60335-2-36:2005

commercial electric cooking ranges, ovens, hobs and hob elements
IEC/SC61E IEC 60335-2-37:2005

commercial electric deep fat fryers
IEC/SC61E IEC 60335-2-39:2005

commercial electric multi-purpose cooking pans
IEC/SC61E IEC 60335-2-49:2005

commercial electric hot cupboards
IEC/SC61E IEC 60335-2-58:2005

commercial electric dishwashing machines
IEC/SC61E IEC 60335-2-62:2005

commercial electric rinsing sinks
IEC/SC61F NEK EN 60335-2-92:2005

Household and similar electrical appliances - Safety -- Part 2-92: Particular requirements
for pedestrian-controlled mains-operated lawn scarifiers and aerators
IEC/SC61F NEK EN 60745-2-19:2005

Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for
jointers
IEC/SC61H IEC 60335-2-71:2005

electrical heating appliances for breeding and rearing animals
IEC/SC61H IEC 60335-2-86:2005

electric fishing machines
IEC/SC61J IEC 60335-2-72:2005

automatic machines for floor treatment for commercial and industrial use

IEC/SC62A prEN ISO 14971:2005
Medical devices - Application of risk management to medical devices
IEC/SC62A prEN 60601-1:2005

Medical electrical equipment -- Part 1: General requirements for basic safety and essential
performance
IEC/SC62A IEC 60601-1-2:2005

Medical electrical equipment - Part 1-2: General requirements for safety - Collateral
standard: Electromagnetic compatibility - Requirements and tests
IEC/SC62A IEC 60601-1-8:2005

Medical electrical equipment - Part 1-8: General requirements for safety - Collateral
Standard: General requirements, tests and guidance for alarm systems in medical electrical
equipment and medical electrical systems
IEC/SC62A IEC 60601-1-SER:2005

Medical electrical equipment - ALL PARTS
IEC/SC62A prEN 62353:2005

Medical electrical equipment - Recurrent test and test after repair of medical electrical
equipment
IEC/SC62B NEK EN 60336:2005

Medical electrical equipment - X-ray tube assemblies for medical diagnosis -
Characteristics of focal spots
IEC/SC62B IEC 60336:2005

Medical electrical equipment - X-ray tube assemblies for medical diagnosis -
Characteristics of focal spots
IEC/SC62B prEN 61223-3-2:2005

Evaluation and routine testing in medical imaging departments -- Part 3-2: Acceptance tests
- Imaging performance of mammographic X-ray equipment
IEC/SC62B prEN 62220-1-2:2005

Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1-2:
Determination of the detective quantum efficiency - Mammography detectors
IEC/SC62C IEC 60601-2-17:2005

Medical electrical equipment - Part 2-17: Particular requirements for the safety of
automatically-controlled brachytherapy afterloading equipment
IEC/SC62C IEC 61948-3:2005

Nuclear medicine instrumentation - Routine tests - Part 3: Positron emission tomographs
IEC/SC62C NEK EN 62274:2005

Medical electrical equipment - Safety of radiotherapy record and verify systems
IEC/SC62C IEC 62274:2005

Medical electrical equipment - Safety of radiotherapy record and verify systems
IEC/SC62D prEN 60601-2-12:2005

Medical electrical equipment -- Part 2-12: Particular requirements for the safety of lung
ventilators - Critical care ventilators
IEC/SC62D prEN 60601-2-13:2005

Medical electrical equipment -- Part 2-13: Particular requirements for the safety and
essential requirements of anaesthetic systems

IEC/SC62D IEC 60601-2-4:2005
Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiac
defibrillators
IEC/SC62D IEC 60601-2-27:2005

Medical electrical equipment - Part 2-27: Particular requirements for the safety, including
essential performance, of electrocardiographic monitoring equipment
IEC/TC64 HD 384.7.708 S2:2005

Electrical installations of buildings -- Part 7: Requirements for special installations or
locations -- Section 708: Electrical installations in caravan parks
IEC/TC64 HD 384.7.754 S1:2005

Electrical installations of buildings -- Part 7: Requirements for special installations or
locations -- Section 754: Electrical installations in caravans and motor-caravans
IEC/TC64 prHD 60364-4-41:2005

Low-voltage electrical installations -- Part 4-41: Protection for safety - Protection against
electric shock
IEC/TC64 prHD 60364-5-534:2005

Electrical installations of buildings -- Part 5-53: Selection and erection of electrical
equipment - Isolation, switching and control -- Clause 534: Devices for protection against
overvoltages
IEC/TC64 HD 60364-5-559:2005
Electrical installations of buildings -- Part 5-55: Selection and erection of electrical
equipment - Other equipment -- Clause 559: Luminaires and lighting installations
IEC/TC64 HD 60364-7-703:2005
Electrical installations of buildings -- Part 7-703: Requirements for special installations or
locations - Rooms and cabins containing sauna heaters
IEC/TC64 prHD 60364-7-705:2005

Low-voltage electrical installations -- Part 7-705: Requirements for special installations or
locations - Agricultural and horticultural premises
IEC/TC64 HD 60364-7-712:2005
locations - Solar photovoltaic (PV) power supply systems
IEC/TC64 HD 60364-7-715:2005
locations - Extra-low-voltage lighting installations
IEC/TC64 IEC 60479-1:2005

Effects of current on human beings and livestock - Part 1: General aspects
IEC/TC65 NEK EN 61499-1:2005

Function blocks -- Part 1: Architecture
IEC/TC65 NEK EN 61499-2:2005

Function blocks -- Part 2: Software tools requirements
IEC/TC65 prEN 61499-4:2005

Function blocks -- Part 4: Rules for compliance profiles
IEC/TC65 IEC 61499-4:2005

Function blocks - Part 4: Rules for compliance profiles
IEC/TC65 prEN 62337:2005

Milestones and activities during commissioning of electrical, instrumentation and control
systems in the process industry

IEC/TC65 prEN 62381:2005
Activities during the factory acceptance test (FAT), site acceptance test (SAT) and site
integration test (SIT) for automation systems in the process industry
IEC/TC65 prEN 62382:2005

Electrical and instrumentation loop check

Control technology - Rules for the designation of measuring instruments

Representation of process control engineering requests in P&I diagrams and data exchange
between P&ID tools and PCE-CAE tools
IEC/SC65A prEN 61326-1:2005

Electrical equipment for measurement, control and laboratory use - EMC requirements --
Part 1: General requirements
IEC/SC65A prEN 61326-2-2:2005

Electrical equipment for measurement, control and laboratory use - EMC requirements --
Part 2-2: Particular requirements - Test configurations - operational conditions and
performance criteria for portable test, measuring and monitoring equipment used in low-
voltage distribution systems
IEC/SC65A IEC 62264-2:2005

Enterprise-control system integration - Part 2: Object model attributes
IEC/SC65B prEN 60584-3:2005

Thermocouples -- Part 3: Extension and compensating cables - Tolerances and
identification systems
IEC/SC65B IEC 60534-8-1:2005

Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement
of noise generated by aerodynamic flow through control valves
IEC/SC65B IEC 60534-8-4:2005

Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise
generated by hydrodynamic flow
IEC/SC65C prEN 61804-2:2005

Function Blocks (FB) for process control -- Part 2: Specification of FB concept
IEC/SC65C prEN 61804-3:2005

Function Blocks (FB) for process control -- Part 3: Electronic device description language
(EDDL)
IEC/SC65C IEC/PAS 62405:2005

Real-time Ethernet Vnet/IP TM specification

Real-time Ethernet TCnet (Time-Critical Control Network)

Real-time Ethernet control automation technology (EtherCATTM)

Real-time Ethernet Powerlink (EPL)

Real-time Ethernet for Plant Automation (EPA)(R)

Real-time Ethernet SERCOS III

Real-time Ethernet PROFINET IO

Real-time Ethernet P-NET on IP specification

Real-time Ethernet - EtherNet/IP(TM) with time synchronization
IEC/TC66 NEK EN 61010-2-040:2005

Safety requirements for electrical equipment for measurement, control and laboratory use --
Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat
medical materials
IEC/TC68 IEC 60404-8-3:2005

Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical
non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state
IEC/TC72 IEC 60730-2-2:2005

Automatic electrical controls for household and similar use - Part 2-2: Particular
requirements for thermal motor protectors
IEC/TC72 IEC 60730-2-12:2005

Automatic electrical controls for household and similar use - Part 2-12: Particular
requirements for electrically operated door locks
CLC/TC76 CLC/TR 50448:2005

Guide to levels of competence required in laser safety
IEC/TC76 IEC 60825-2:2005

Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
IEC/TC77 NEK EN 61000-6-2:2005

Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial
environments
IEC/SC77A IEC 60725:2005

Consideration of reference impedances and public supply network impedances for use in
determining disturbance characteristics of electrical equipment having a rated current = <
75 A per phase
IEC/SC77A IEC 61000-1-4:2005

Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the
limitation of power-frequency conducted harmonic current emissions from equipment, in the
frequency range up to 2 kHz
IEC/SC77B prEN 61000-4-18:2005

Electromagnetic compatibility (EMC) -- Part 4-18: Testing and measurement techniques -
Oscillatory wave immunity test
IEC/SC77C IEC 61000-4-33:2005

Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques -
Measurement methods for high-power transient parameters
CLC/TC79 NEK EN 50131-5-3:2005

Alarm systems - Intrusion systems -- Part 5-3: Requirements for interconnections equipment
using radio frequency techniques
IEC/TC80 IEC 61162-402:2005

Maritime navigation and radiocommunication equipment and systems - Digital interfaces -
Part 402: Multiple talkers and multiple listeners - Ship systems interconnection -
Documentation and test requirements
IEC/TC80 IEC/PAS 61996-2:2005

Maritime navigation and radiocommunication equipment and systems - Shipborne voyage
data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance
requirements - Methods of testing and required test results

Resistibility requirements to overvoltages and overcurrents due to lightning for equipment
having telecommunication port
IEC/TC82 NEK EN 61215:2005

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type
approval
IEC/TC82 IEC 61215:2005

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type
approval
IEC/TC82 NEK EN 62093:2005

Balance-of-system components for photovoltaic systems - Design qualification natural
environments
IEC/TC82 IEC 62257-4:2005

Recommendations for small renewable energy and hybrid systems for rural electrification -
Part 4: System selection and design
IEC/TC82 IEC 62257-5:2005

Part 5: Protection against electrical hazards
IEC/TC82 IEC 62257-6:2005

Part 6: Acceptance, operation, maintenance and replacement
IEC/TC85 prEN 61557-1:2005

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring of protective measures -- Part 1: General
requirements
IEC/TC85 prEN 61557-2:2005

Equipment for testing, measuring or monitoring of protective measures -- Part 2: Insulation
resistance
IEC/TC85 prEN 61557-3:2005

Equipment for testing, measuring or monitoring of protective measures -- Part 3: Loop
impedance
IEC/TC85 prEN 61557-4:2005

Equipment for testing, measuring or monitoring of protective measures -- Part 4: Resistance
of earth connection and equipotential bonding
IEC/TC85 prEN 61557-5:2005

Equipment for testing, measuring or monitoring of protective measures -- Part 5: Resistance
to earth
IEC/TC85 prEN 61557-6:2005

Equipment for testing, measuring or monitoring of protective measures -- Part 6: Residual
current devices (RCD) in TT and TN systems

IEC/TC85 prEN 61557-7:2005
Equipment for testing, measuring or monitoring of protective measures _- Part 7: Phase
sequence
IEC/TC85 HD 612 S1:1992 (Withdrawal)

Standard cells
IEC/TC85 IEC 62008:2005

Performance characteristics and calibration methods for digital data acquisition systems and
relevant software
IEC/TC86 IEC 61744:2005

Calibration of fibre optic chromatic dispersion test sets
IEC/TC86 prEN 62129:2005

Calibration of optical spectrum analyzers
IEC/SC86A prEN 60793-1-42:2005

Optical fibres -- Part 1-42: Measurement methods and test procedures - Chromatic
dispersion
IEC/SC86A IEC 60794-2-11:2005

Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex
cables for use in premises cabling
IEC/SC86A IEC 60794-2-21:2005

Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical
distribution cables for use in premises cabling
IEC/SC86A IEC 60794-2-31:2005

Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon
cables for use in premises cabling
IEC/SC86A IEC 60794-3-12:2005

Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly
buried optical telecommunication cables for use in premises cabling
IEC/SC86A IEC 60794-3-21:2005

Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-
supporting aerial telecommunication cables for use in premises cabling
IEC/SC86A IEC 62285:2005

Application guide for non-linear coefficient measuring methods
IEC/SC86B prEN 60874-1:2005

Connectors for optical fibres and cables -- Part 1: Generic specification
IEC/SC86B prEN 60874-1-1:2005

Connectors for optical fibres and cables -- Part 1: Blank detail specification
IEC/SC86B prEN 61274-1:2005

Adaptors for fibre optic connectors -- Part 1: Generic specification
IEC/SC86B prEN 61274-1-1:2005

Adaptors for optical fibres and cables -- Part 1-1: Blank detail specification
IEC/SC86B prEN 61300-2-16:2005

Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures -- Part 2-16: Tests - Mould growth

IEC/SC86B NEK EN 61300-2-18:2005
procedures -- Part 2-18: Tests - Dry heat - High temperature endurance
IEC/SC86B prEN 61300-2-33:2005

procedures -- Part 2-33: Tests - Assembly and disassembly of fibre optic closures
IEC/SC86B prEN 61300-2-37:2005

procedures -- Part 2-37: Tests - Cable bending for fibre optic closures
IEC/SC86B prEN 61300-2-38:2005

procedures -- Part 2-38: Tests - Sealing for fibre optic closures
IEC/SC86B NEK EN 61300-2-42:2005

procedures -- Part 2-42: Tests - Static side load for connectors
IEC/SC86B NEK EN 61300-2-44:2005

procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
IEC/SC86B prEN 61300-2-50:2005

Basic test and measurement procedures -- Part 2-50: Tests - Fibre optic connector proof
test - singlemode and multimode
IEC/SC86B prEN 61300-2-51:2005

Basic test and measurement procedures -- Part 2-51: Tests - Fibre optic connector test for
transmission with applied tensile load - singlemode and multimode
IEC/SC86B prEN 61300-3-18:2005

procedures -- Part 3-18: Examinations and measurements - Keying accuracy of an angled
enfdface connector
IEC/SC86B prEN 61300-3-29:2005

procedures -- Part 3-29: Examinations and measurements - Measurement techniques for
characterising the amplitude of the spectral transfer function of DWDM components
IEC/SC86B NEK EN 61300-3-37:2005

procedures -- Part 3-37: Examinations and measurements - Endface angle of angle-polished
optical fibres
IEC/SC86B NEK EN 61314-1:2005

Fibre optic fan-outs -- Part 1: Generic specification
IEC/SC86B prEN 61314-1-1:2005

Fibre optic fan-outs -- Part 1-1: Blank detail specification
IEC/SC86B prEN 61753-101-2:2005

Fibre optic interconnecting devices and passive components - Performance standard -- Part
101-2: Fibre management systems for category C - Controlled environment

IEC/SC86B prEN 61753-101-3:2005
Fibre optic interconnecting devices and passive components - Performance standard -- Part
101-2: Fibre management systems for category U - Uncontrolled environment
IEC/SC86B NEK EN 61754-21:2005

Fibre optic connector interfaces -- Part 21: Type SMI connector family for plastic optical fibre
IEC/SC86B NEK EN 61754-22:2005

Fibre optic connector interfaces -- Part 22: Type F-SMA connector family
IEC/SC86B NEK EN 61754-23:2005

Fibre optic connector interfaces -- Part 23: Type LX.5 connector family
IEC/SC86B prEN 61755-1:2005

Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non-
dispersion shifted fibres - General and guidance
IEC/SC86B IEC 61300-2-12:2005

procedures - Part 2-12: Tests - Impact
IEC/SC86B IEC 61300-2-18:2005

procedures - Part 2-18: Tests - Dry heat - High temperature endurance
IEC/SC86B IEC 61300-2-42:2005

procedures - Part 2-42: Tests - Static side load for connectors
IEC/SC86B IEC 61300-3-1:2005

procedures - Part 3-1: Examinations and measurements - Visual examination
IEC/SC86B IEC 61300-3-37:2005

procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished
optical fibres
IEC/SC86B IEC 61314-1:2005

Fibre optic fan-outs - Part 1: Generic specification
IEC/SC86B IEC 61754-5:2005

Fibre optic connector interfaces - Part 5: Type MT connector family
IEC/SC86B IEC 61754-10:2005

Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family
IEC/SC86B IEC 61754-22:2005

Fibre optic connector interfaces - Part 22: Type F-SMA connector family
IEC/SC86B IEC 61754-23:2005

Fibre optic connector interfaces - Part 23: Type LX.5 connector family
CLC/TC86BXA NEK EN 50377-10-2:2005

Connectors sets and interconnect components to be used in optical fibre communication
systems - Product specifications -- Part 10-2: MU-APC singlemode terminated on IEC
60793-2 category B1 fibre
IEC/SC86C NEK EN 61280-2-2:2005

Fibre optic communication subsystem test procedures -- Part 2-2: Digital systems - Optical
eye pattern, waveform and extinction ratio measurement
IEC/SC86C NEK EN 61280-2-10:2005

Fibre optic communication subsystem test procedures -- Part 2-10: Digital systems - Time-
resolved chirp and alpha-factor measurement of laser transmitters

IEC/SC86C prEN 61280-2-11:2005
Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems -
Averaged Q-factor determination using amplitude histogram evaluation for optical signal
quality monitoring
IEC/SC86C EN 61290-2-1:1998 (Withdrawal)

Optical fibre amplifiers - Basic specification -- Part 2-1: Test methods for optical power
parameters - Optical spectrum analyzer
IEC/SC86C EN 61290-2-3:1998 (Withdrawal)

Optical fibre amplifiers - Basic specification -- Part 2-3: Test methods for optical power
parameters - Optical power meter
IEC/SC86C NEK EN 61290-11-2:2005

Optical amplifiers - Test methods -- Part 11-2: Polarization mode dispersion parameter -
Poincaré sphere analysis method
IEC/SC86C IEC 61280-2-2:2005

Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical
eye pattern, waveform and extinction ratio measurement
IEC/SC86C IEC 61280-2-10:2005

Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-
resolved chirp and alpha-factor measurement of laser transmitters
IEC/SC86C NEK EN 62150-1:2005

Fibre optic active components and devices - Test and measurement procedures -- Part 1:
General and guidance
IEC/SC86C prEN 62343-1-3:2005

Dynamic modules -- Part 1-3: Performance standards - Dynamic gain tilt equalizer with
pigtails for use in controlled environement (Category C)
IEC/SC86C IEC 62150-1:2005

Fibre optic active components and devices - Test and measurement procedures - Part 1:
General and guidance
IEC/TC88 prEN 61400-25-1:2005

Wind turbines -- Part 25-1: Communications for monitoring and control of wind power plants
- Overall description of principles and models
IEC/TC88 prEN 61400-25-2:2005

- Information models
IEC/TC88 prEN 61400-25-3:2005

- Information exchange models
IEC/TC88 prEN 61400-25-4:2005

- Mapping to XML based communication profile
IEC/TC88 prEN 61400-25-5:2005

- Conformance testing
IEC/TC88 IEC 61400-1:2005

Wind turbines - Part 1: Design requirements

IEC/TC89 NEK EN 60695-6-1:2005
Fire hazard testing -- Part 6-1: Smoke obscuration - General guidance
IEC/TC89 IEC 60695-4:2005

Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
IEC/TC89 IEC 60695-6-1:2005

Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
IEC/TC89 IEC 60695-6-2:2005

Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
IEC/TC89 IEC 60695-9-1:2005

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
IEC/TC89 IEC 60695-9-2:2005

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test
methods
IEC/TC89 IEC 60695-11-21:2005

Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular
polymeric materials
IEC/TC90 prEN 61788-1:2005

Superconductivity -- Part 1: Critical current measurement - DC critical current of Nb-Ti
composite superconductors
IEC/TC90 prEN 61788-2:2005

Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn
composite superconductors
IEC/TC90 prEN 61788-7:2005

Superconductivity -- Part 7: Electronic characteristic measurements - Surface resistance of
superconductors at microwave frequencies
IEC/TC90 NEK EN 61788-9:2005

Superconductivity -- Part 9: Measurements for bulk high temperature superconductors -
Trapped flux density of large grain oxide superconductors
IEC/TC90 IEC 61788-9:2005

Superconductivity - Part 9: Measurements for bulk high temperature superconductors -
Trapped flux density of large grain oxide superconductors
IEC/TC91 prEN 60068-2-69:2005

Environmental testing -- Part 2: Tests - Test Te: Solderability testing of electronic
components for surface mounting devices (SMD) by the wetting balance method
IEC/TC91 EN 60249-1:1993 (Withdrawal)

Base materials for printed circuits -- Part 1: Test methods
IEC/TC91 EN 60249-2-1:1994 (Withdrawal)

Base materials for printed circuits -- Part 2: Specifications - Specification No. 1: Phenolic
cellulose paper copper-clad laminated sheet, high electrical quality

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 2: Phenolic
cellulose paper copper-clad laminated sheet, economic quality

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 3: Epoxide
cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)

woven glass fabric copper-clad laminated sheet, general purpose grade

cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test)

cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 8: Flexible
copper-clad polyester (PETP) film

cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined
flammability (vertical burning test)

non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability
(vertical burning test)

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 11: Thin
epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in
the fabrication of multilayer printed boards

copper-clad laminated polyimide film, general purpose grade

cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test),
economic quality

copper-clad polyimid film, of defined flammability

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 16: Polyimide
woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning
test)

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 17: Thin
polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in
the fabrication of multilayer printed boards

Base materials for printed circuits -- Part 2: Specifications -- Specification No. 18:
Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of
defined flammability (vertical burning test)

Base materials for printed circuits -- Part 2: Specifications - Specification No. 19:
Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of
defined flammability for use in the fabrication of multilayer printed boards
IEC/TC91 prEN 61189-2:2005

Test methods for electrical materials, interconnection structures and assemblies -- Part 2:
Test methods for materials for interconnection structures
IEC/TC91 IEC 61249-4-2:2005

Materials for printed boards and other interconnecting structures - Part 4-2: Sectional
specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass
prepreg of defined flammability
IEC/TC91 IEC 61249-4-5:2005

specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-
glass prepreg of defined flammability
IEC/TC91 IEC 61249-4-11:2005

specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass
prepreg of defined flammability
IEC/TC91 IEC 61249-4-12:2005

specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide
woven E-glass prepreg of defined flammability
IEC/TC93 EN 61691-1:1997 (Withdrawal)

Design automation -- Part 1: VHDL language reference manual
IEC/TC93 IEC 62050:2005

VHDL Register Transfer Level (RTL) synthesis
IEC/TC93 IEC 62142:2005

Verilog (R) register transfer level synthesis
IEC/TC93 IEC 62243:2005

Artificial intelligence exchange and service tie to all test environments (Al-ESTATE)
IEC/TC93 IEC 62265:2005

Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and
blocks
IEC/TC94 NEK EN 61810-2:2005

Electromechanical elementary relays -- Part 2: Reliability
IEC/TC96 IEC 61558-1:2005

Safety of power transformers, power supplies, reactors and similar products - Part 1:
General requirements and tests
IEC/TC100 NEK EN 60728-11:2005

Cable networks for television signals, sound signals and interactive services –
Part 11: Safety
IEC/TC100 prEN 60958-3:2005

Digital audio interface -- Part 3: Consumer applications

IEC/TC100 IEC 60728-3:2005
Cable networks for television signals, sound signals and interactive services - Part 3: Active
wideband equipment for coaxial cable networks
IEC/TC100 IEC 60728-10:2005

Cable networks for television signals, sound signals and interactive services - Part 10:
System performance of return paths
IEC/TC100 NEK EN 61937-7:2005

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 --
Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X
formats
IEC/TC100 prEN 61937-8:2005

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 --
Part 8: Non-linear PCM bitstreams according to the Windows Media Audio Professional
(TA4)
IEC/TC100 IEC 61305-6:2005

Household high-fidelity audio equipment and systems - Methods of measuring and
specifying the performance - Part 6: Listening tests on loudspeakers - Single stimulus
ratings and paired comparisons
IEC/TC100 IEC 61925:2005

Multimedia systems and equipment - Multimedia home server systems - Vocabulary of
home server
IEC/TC100 NEK EN 62297-1:2005

Triggering messages for broadcast applications -- Part 1: Format
IEC/TC100 NEK EN 62297-2:2005

Triggering messages for broadcast applications -- Part 2: Transport methods
IEC/TC100 NEK EN 62298-1:2005

Teleweb application -- Part 1: General description
IEC/TC100 NEK EN 62298-2:2005

Teleweb application -- Part 2: Delivery methods
IEC/TC100 NEK EN 62298-3:2005

Teleweb application -- Part 3: Superteletext profile
IEC/TC100 NEK EN 62328-1:2005

Multimedia home server systems - Interchangeable volume/file structure adaptation for
broadcasting receivers -- Part 1: General description and architecture
IEC/TC100 NEK EN 62328-2:2005

broadcasting receivers -- Part 2: General recording structure
IEC/TC100 NEK EN 62365:2005

Digital audio - Digital input-output interfacing - Transmission of digital audio over
asynchronous transfer mode (ATM) networks
IEC/TC100 prEN 62403:2005

High density recording format on CD-R/RW disc system - HD-BURN format
IEC/TC100 IEC 62261-1:2005

Television METADATA - Part 1: Metadata dictionary structure
IEC/TC100 IEC 62261-2:2005

Television METADATA - Part 2: Data encoding protocol using key-length-value
IEC/TC100 IEC 62297-1:2005

Triggering messages for broadcast applications - Part 1: Format
IEC/TC100 IEC 62297-2:2005

Triggering messages for broadcast applications - Part 2: Transport methods

IEC/TC100 IEC 62298-1:2005
TeleWeb application - Part 1: General description
IEC/TC100 IEC 62298-2:2005

TeleWeb application - Part 2: Delivery methods
IEC/TC100 IEC 62298-3:2005

TeleWeb application - Part 3: Superteletext profile
IEC/TC100 IEC 62328-1:2005

broadcasting receivers - Part 1: General description and architecture
IEC/TC100 IEC 62328-2:2005

broadcasting receivers - Part 2: General recording structure
IEC/TC100 IEC 62328-3:2005

broadcasting receivers - Part 3: Broadcasting system specific recording structure - ISDB
IEC/TC100 IEC 62393:2005

Portable and hand-held multimedia equipment - Mobile computers - Battery run-time
measurement
IEC/TC100 IEC 62403:2005

High density recording format on CD-R/RW disc systems - HD-BURN format
IEC/TC104 NEK EN 60068-2-10:2005

Environmental testing -- Part 2-10: Tests - Test J and guidance: Mould growth
IEC/TC104 NEK EN 60068-2-47:2005

Environmental testing -- Part 2-47: Tests - Mounting of specimens for vibration, impact and
similar dynamic tests
IEC/TC104 NEK EN 60068-2-80:2005

Environmental testing -- Part 2-80: Tests - Test Fi: Vibration - Mixed mode
IEC/TC104 IEC 60068-2-10:2005

Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
IEC/TC104 IEC 60068-2-30:2005

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC/TC104 IEC 60068-2-80:2005

Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
IEC/TC106 prEN 62226-3-1:2005

Exposure to electric or magnetic fields in the low and intermediate frequency range -
Methods for calculating the current density and internal electric field induced in the human
body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical models
IEC/TC107 IEC 62240:2005

Process management for avionics - Use of semiconductor devices outside manufacturers'
specified temperature range
CLC/TC107X NEK EN 50389:2005

Space product assurance - Wire-wrapping of high-reliability electrical connections
CLC/TC107X CLC/prTS 50466:2005

Long duration storage of electronic components - Specification for implementation
IEC/TC108 IEC 60950-23:2005

Information technology equipment - Safety - Part 23: Large data storage equipment

IEC/TC108 CLC/TR 62102:2005
Electrical safety - Classification of interfaces for equipment to be connected to information
and communications technology networks
IEC/TC108 CLC/TS 62367:2005

Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL:
Digital Subscriber Line)
IEC/TC108 IEC 62102:2005

Electrical safety - Classification of interfaces for equipment to be connected to information
and communications technology networks
IEC/TC109 IEC 60664-4:2005

Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of
high-frequency voltage stress
IEC/TC110 prEN 61988-4:2005

Plasma Display Panels -- Part 4: Environmental and mechanical endurance test methods
IEC/TC112 IEC 60216-2:2005

Electrical insulating materials - Thermal endurance properties - Part 2: Determination of
thermal endurance properties of electrical insulating materials - Choice of test criteria
IEC/TC112 IEC 62332-1:2005

Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid
components - Part 1: General requirements
CLC/SC205A NEK EN 50065-4-7:2005

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz
and 1,6 MHz to 30 MHz -- Part 4-7: Portable low voltage decoupling filters - Safety
requirements
CLC/SC205A NEK EN 50412-2-1:2005

Power line communication apparatus and systems used in low-voltage installations in the
frequency range 1,6 MHz to 30 MHz -- Part 2-1: Residential, commercial and industrial
environment - Immunity requirements
CLC/TC209 CLC/TR 50460:2005

Cable networks for television signals, sound signals and interactive services - System
guidelines for analogue optical transmission systems
CLC/TC210 CLC/TS 50217:2005

Guide for in situ measurements - In situ measurement of disturbance emission
CLC/TC210 NEK EN 50370-1:2005

Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 1:
Emission
CLC/TC210 prEN 55103-1:2005

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use -- Part 1: Emissions
CLC/TC210 prEN 55103-2:2005

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use -- Part 2: Immunity
CLC/TC213 NEK EN 50085-1:2005

Cable trunking systems and cable ducting systems for electrical installations -- Part 1:
General requirements
CLC/TC213 NEK EN 50369:2005

Liquid tight sheathing systems for cable management
CLC/TC215 prEN 50173-1:2005

Information technology - Generic cabling systems -- Part 1: General requirements

CLC/TC215 prEN 50173-2:2005
Information technology - Generic cabling systems -- Part 2: Office premises
CLC/TC215 prEN 50173-4:2005

Information technology - Generic cabling systems -- Part 4: Residential premises
CLC/TC215 prEN 50173-5:2005

Information technology - Generic cabling systems -- Part 5: Data centers
CLC/TC215 CLC/prTR 50450:2005

Resistibility requirements for equipment having (a) telecommunication port(s)
CLC/TC216 prEN 50194-2:2005

ISO/TC-CASCO prEN ISO/IEC 17021:2005

Conformity assessment - Requirements for bodies providing audit and certification of
management systems
ISO/TC-CASCO NEK EN ISO/IEC 17025:2005

General requirements for the competence of testing and calibration laboratories
IEC/CISPR/A CISPR 16-2-1:2005

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-
1: Methods of measurement of disturbances and immunity - Conducted disturbance
measurements
IEC/CISPR/A CISPR 16-2-2:2005

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-
2: Methods of measurement of disturbances and immunity - Measurement of disturbance
power
IEC/CISPR/D IEC/PAS 62437:2005

Radio disturbance characteristics for the protection of receivers used on board vehicles,
boats, and on devices - Limits and methods of measurement - Specifications for active
antennas

Medd Komite Sortert

Uploaded by

Copyright:

Available Formats

Medd Komite Sortert

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Medd Komite Sortert

Uploaded by

Copyright:

Available Formats

NYE NORMER FRA IEC OG CENELEC, SAMT

CENELEC-FORSLAG FOR VOTERING

CLC/JWG-EMC prEN 50471:2005

IEC/TC2 NEK EN 60034-3:2005

IEC/TC2 NEK EN 60034-9:2005

IEC/TC3 IEC 61175:2005

IEC/TC3 IEC/PAS 61906:2005

IEC/TC3 IEC/PAS 62400:2005

IEC/SC3D NEK EN 61360-4:2005

IEC/TC4 NEK EN 60308:2005

CLC/TC8X prEN 50160:2005

IEC/TC9 IEC 61287-1:2005

CLC/SC9XA CLC/TS 50459-1:2005

CLC/SC9XA CLC/TS 50459-2:2005

CLC/SC9XA CLC/TS 50459-3:2005

NEK Meddelelser Nr. 114 - November 2005 Side 1

CLC/SC9XA CLC/TS 50459-5:2005

CLC/SC9XA CLC/TS 50459-6:2005

CLC/SC9XB prEN 50405:2005

CLC/SC9XC NEK EN 50388:2005

IEC/TC10 NEK EN 60376:2005

IEC/TC10 NEK EN 60836:2005

IEC/TC10 IEC 60376:2005

IEC/TC10 IEC 60567:2005

IEC/TC10 IEC 60836:2005

IEC/TC10 prEN 61181:2005

CLC/TC13 prEN 50470-1:2005

CLC/TC13 prEN 50470-2:2005

CLC/TC13 prEN 50470-3:2005

IEC/TC13 IEC 62053-52:2005

IEC/TC13 IEC 62055-21:2005

IEC/TC13 IEC 62055-31:2005

CLC/TC14 NEK EN 50216-8:2005

NEK Meddelelser Nr. 114 - November 2005 Side 2

IEC/TC14 IEC 60076-SER:2005

IEC/TC15 prEN 60454-3-4:2005

IEC/TC15 prEN 60454-3-11:2005

IEC/TC15 prEN 60455-3-5:2005

IEC/TC15 prEN 60684-3-211:2005

IEC/TC15 prEN 60684-3-246:2005

IEC/TC15 prEN 60684-3-248:2005

IEC/SC15C NEK EN 60684-3-216:2005

IEC/SC15E prEN 60216-3:2005

IEC/TC16 prEN 60445:2005

IEC/SC17A IEC 62271-107:2005

IEC/SC17A IEC 62271-110:2005

IEC/SC17B IEC 60947-3:2005

IEC/SC17B IEC 60947-6-1:2005

NEK Meddelelser Nr. 114 - November 2005 Side 3

CLC/TC20 prEN 50200:2005

CLC/TC20 prEN 50264-1:2005

CLC/TC20 prEN 50264-2-1:2005

CLC/TC20 prEN 50264-2-2:2005

CLC/TC20 prEN 50264-3-1:2005

CLC/TC20 prEN 50264-3-2:2005

CLC/TC20 NEK EN 50395:2005

CLC/TC20 NEK EN 50396:2005

CLC/TC20 prEN 50414:2005

IEC/TC20 IEC 60055-1:2005