Abb Weather Proof

Weatherproof
Boxes & Covers

Red•Dot weatherproof boxes & covers
Contents
Overview 2
Weatherproof metallic covers 3-10
Weatherproof non-metallic covers 11-15
Weatherproof metallic boxes 16-21
Weatherproof non-metallic fixtures and boxes 22
Weatherproof metallic lampholders 23-27
Outdoor lighting 28-42
Vaportight lighting 43-48
Swimming pool and spa products 49
Stainless Steel covers 50-51
Catalog Number Index IDX-1-IDX-2
Catalog | Red•Dot Weatherproof Boxes & Covers 1

Overview
Weatherproof boxes, covers and lighting products
Weatherproof boxes, covers and lighting products

The industry’s preferred choice for more than 50 years—
Red•Dot ® Weatherproof Boxes and Covers withstand the
harshest elements and ensure trouble-free installation and
performance.
Boxes Lighting
Red•Dot ® boxes are made Red•Dot® has a complete
from durable die-cast lighting package for both
aluminum and available in general purpose outdoor
single- and double-gang lighting as well as decorative
rectangular as well as round garden lights. All lighting
configurations—with a products run off line voltage,
variety of hub sizes to meet all providing more flexibility and
needs. brighter lighting than low-
voltage or solar-powered sets,
plus no additional transformers
are required.
While-in-use
Red•Dot ® offers a wide variety Merchandisers
of both metallic and non- With your choice of various
metallic while-in-use covers. All stock displays or a customized
of these covers help ensure display to fit your needs,
that you meet the Red•Dot ® makes it easy to
requirements of the National increase your counter sales.
Electrical Code ®.
Covers
Red•Dot ® die-cast flip-lid
weatherproof covers protect
any outdoor receptacle from
the elements. Constructed
from rugged die-cast zinc,
these covers will last a life-
time. A full line of non-metallic
covers is also available.
NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc.
2 Red•Dot Weatherproof Boxes & Covers | Catalog

Weatherproof metallic covers
Wet or dry, all outlets can go undercover with Code Keeper®
Code Keeper® weatherproof covers

Code Keeper® while-in-use applications
Weatherproof Covers are required by the National Electrical
Code® anyplace where water may come in contact with electrical
outlets when a plug is in use. Code Keeper® covers are also ideal
anywhere to prevent accidental disconnects, reduce tampering
and to provide a lockable cover that meets OSHA requirements.
Suggested applications:
Residential—holiday and
landscape lighting, wells and
sump pumps, sprinkler
systems, plug-in timers,
garages, patios.
Commercial—vending
machines, car washes,
outdoor signs, restaurant
kitchens, greenhouses and
The electrical code is the reason you need a wet-location cover,
nurseries, marinas, garages,
but the reasons to buy Code Keeper ® covers are simple:
lumberyards.
aluminum construction, easy installation with instructions in
English, Spanish and French, and a lifetime warranty from a
manufacturer that has defined reliability in electrical construction
materials for more than half of a century.
Industrial—manufacturing
areas, food processing, water Cover the code with protection that lasts a lifetime with Code
treatment plants, security Keeper ® covers.
cameras, laboratories, wash-
down areas, loading docks. The National Electrical Code® requires you to cover outdoor or
other wet-location receptacles any time they are in use to ensure
the safety of anyone who may come in contact with them.
Code Keeper ® covers are corrosion-resistant, aluminum wet-

Recreational—pools and spas, location covers that meet the requirements of the National
parks, playgrounds, zoos, RV Electrical Code ® and are backed by a lifetime warranty.
connections, athletic fields, ball
parks, stadiums, outdoor stages, Red•Dot ® Code Keeper® wet-location cover is NEMA 3R Rated,
amphitheaters, golf courses. UL Listed and CSA Certified and meets all the requirements
of NEC ® Section 406.9(B). Code Keeper® covers are rugged,
corrosion-resistant metal construction that provide long-lasting
durability and are not subject to cracking or breaking. Made
with the same Red•Dot ® quality that contractors know and
National Electrical Code® Section 406.9(B): trust. Code Keeper ® covers offer a lifetime of use and safety.
(1) 15- and 20-Ampere, 125- and 250-Volt receptacles installed
outdoors in a wet location shall have an enclosure that is NEC and National Electrical Code are registered trademarks of the National Fire
weatherproof whether or not the attachment plug cap is inserted. Protection Association, Inc.

Code Keeper® metallic while-in-use covers
Hinge
Applications:
−− Protects receptacles, switches and plugs for single-gang and Cover Plate
two-gang configurations in dry and wet locations
− − Provides a lockable cover that complies with OSHA lockout/
tagout requirements FS mount
− − Prevents accidental equipment disconnects, reduces
tampering and deters theft and equipment removal
Features/Benefits:
−− Alloy A360 copper-free* aluminum provides increased
Device mount
corrosion resistance
− − Die-cast, metal construction provides long-lasting durability
Padlock eye for 1⁄4" shackle
− − NEMA 3R Rating ensures protection against falling rain,
sleet and external ice formation when used with appropriate
device boxes
−− Clear UL® and CSA markings speed approval by inspectors Sample specifications:
−− Wide range of cover depths and receptacle configurations − − Code Keeper® covers shall comply with NEC® Section
accommodate almost every common plug and cord size 406.9(B) and be die-cast copper-free* aluminum alloy A360.
when combined with included adapter plates Covers shall be finished powder-coated paint.
−− Combination box or device mounting design provides − − Red•Dot ® Catalog No. _______________
flexibility in installation *Less than .004 copper content.
Standard materials: All 15- and 20-ampere, 125- and 250-volt receptacles installed
−− Covers and plates: Die-cast aluminum alloy A360 with less outdoors in a wet location must have an enclosure that is
than .004 copper content (copper-free) weatherproof whether or not the attachment plug is inserted.
−− Gaskets: Closed-cell foam
Code-Keeper® is required by the National Electrical Code®
Standard finish: Section 406.9(B) for unattended in-use plugs in wet locations.
−− Powder-coated finish −− Die-cast A360 aluminum alloy (less than .004% copper
content)
Compliances: − − NEMA 3R Rating
−− NEC ® Section 406.9(B) − − Clear UL® and CSA markings
−− UL® Listed −− Wide range of cover depths and receptacle configurations
−− CSA Certified −− Sturdy lockable cover tab complies with OSHA lockout/
tagout requirements
NEC and National Electrical Code are registered trademarks of the National Fire Protection
Association, Inc. −− Combination box- or device-mount design (for most styles)
−− Powder-coated finish
−− “Extra-Duty” per NEC ® Section 406.9(B)(1)
CKSUV CKMU CKMUV CKLSVU 2CKU
Single-gang Single-gang Single-gang Single-gang Two-gang

small vertical medium horizontal medium vertical large vertical

Code Keeper® metallic while-in-use covers—single gang
“Extra-Duty” per NEC® Section 406.9(B)(1)

CKSUV—Small vertical cover, 21⁄4" internal depth
Use for any of these configurations:
2 1⁄ 4"
2 1⁄ 4"
Duplex GFCI Single Switch

receptacle
Note: Covers packed with gasket and screws.
up to 19⁄16"
CKMU—Medium horizontal cover, 31⁄4" internal depth
3 1⁄ 2" Use for any of these configurations:
3 1⁄ 4"

receptacle up
to 19⁄16"
Note: Covers packed with gasket and screws.
CKMUV—Medium vertical cover, 31⁄4" internal depth
3 1⁄ 4"

receptacle
Note: Covers packed with gasket and screws. up to 19⁄16"
CKLSVU—Large vertical cover, 43⁄4" internal depth

5"
4 3⁄4"
NEC and National Electrical Code are

registered trademarks of the National Fire
Note: Covers packed with gasket and screws. Single receptacle up to 19⁄16" Protection Association, Inc.

Code Keeper® metallic while-in-use covers—two-gang
“Extra-Duty” per NEC® Section 406.9(B)(1)

2CKU—Regular cover, 41⁄4" internal depth
4 1⁄ 4"
Two-duplex Single up to 13⁄ 8" and Two-GFCI receptacle

receptacle cover GFCI receptacle cover cover
Note: Dry-Tite® covers packed with gasket and screws.
*Can be used to cover one receptacle with an oversized wall opening.
Toggle and GFCI Duplex and GFCI Toggle and duplex

receptacle cover receptacle cover receptacle cover
Two-single up to 13⁄ 8" Toggle and single up Single up to 13⁄8" and

receptacle cover to 13⁄8" receptacle duplex receptacle
cover cover
Two-toggle switch cover
NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc.

Universal flip-lid weatherproof covers
Universal design installs in both horizontal and vertical applications.

New Red•Dot® Universal Flip-Lid Weatherproof Covers save you
time and money by reducing the number of items you have to
inventory to complete a job. Capable of mounting either vertically
or horizontally, the covers provide added versatility with innovative
adapter plates to support all of the most common installation
configurations—12 with the single-gang cover and 25 with the
2-gang cover. Choose from silver, bronze or white covers.
Features:
−− Included adapter plates offer 12 installation options with single-
gang cover and 25 installation options with 2-gang cover
− − Keyhole openings on back enable easy installation on an
existing outlet
− − Durable, die-cast zinc-alloy construction
− − Suitable for use in wet locations with cover closed
− − Available in silver, bronze and white
− − Lockable for security when not in use
− − Easy access to outlet with 130° opening
− − Preconfigured for GFCI—the industry’s most common
CCU
outdoor application
Accommodates multiple outlet configurations (receptacles not included)
GFCI Duplex Single receptacle Switch Includes two adapter plates,

single receptacle up to 19/16"
Cat. No. Description

CCU Single-gang cover
(installs vertically or horizontally)—silver
DCCU D-PAK®—single-gang cover, silver
DCCU-BR D-PAK®—single-gang cover, bronze
DCCU-WH D-PAK®—single-gang cover, white
DCCU-L D-PAK®—single-gang cover, lockable
2CCU 2-Gang cover—silver
2CCU-BR 2-Gang cover—bronze
2CCU-WH 2-Gang cover—white

Single-gang device covers

Cat. No. Color Description Cat. No. Color Description
Duplex receptacle cover, horizontal Single receptacle cover, horizontal— 1.59" Diameter opening
CCD Silver Device mount CCS Silver Device mount
CCD-L Silver Device mount with
lock option CCS-L Silver Lockable
CCD-FS Silver Box mount
CCSSO Silver Stay open lid
WR81-CN Natural Cover, stay-open lid CCS
WRH80-C Gray Cover, self-closing lids Single receptacle cover, vertical— 1.59"/2.156" Diameter opening
D-PAK® CCSV Silver Device mount
DCCD Silver Device mount CCSV-L Silver
Device mount with lock option
DCCD-BR Bronze Device mount CCPO Silver
Power outlet cover with 2.156"
DCCD-WH White Device mount Diameter opening, box mount
CCD
DCCDSO Silver Device mount, stay open CCSV CCPO-L Silver Box mount with lock option
DCCDSO-BR Bronze Device mount, stay open Single receptacle cover, vertical—1.59" Opening
DCCDSO-WH White Device mount, stay open CCSV-TL Silver Device mount integral locking
Duplex receptacle cover, vertical hasp
CCDV Silver Device mount
CCDV-L Silver Device mount with
CCSV-TL
lock option
D-PAK ® Motor base plug and cover, horizontal
DCCDV Silver Device mount CCMB Silver Device mount 15a, 125v
Motor base plug
DCCDV-BR Bronze Device mount
CCDV DCCDV-WH White Device mount
GFCI receptacle cover, horizontal CCMB
CCG Silver Device mount
Switch cover only
CCG-FS Silver Box mount
CCT Silver Device mount switch cover
CCG-L Silver Lockable only, packed with spacers and
D-PAK® screws
DCCG Silver Device mount
DCCG-BR Bronze Device mount CCT
CCG DCCG-WH White Device mount Switch cover with switch
GFCI Receptacle cover, vertical CCT-1 Silver Single-pole 15a, 125v
CCGV Silver Device mount CCT-1-20 Silver Single-pole 20a, 120-277v
CCGV-L Silver Device mount with SW1 Silver One-gang cover with 10a, 125v
lock option single-pole switch
D-PAK® SW2 Silver One-gang cover with 10a, 125v
DCCGV Silver Device mount double-pole switch
DCCGV-BR Bronze Device mount SW20- Silver One-gang cover with 20a,
1/710 102/277v single-pole switch
CCGV DCCGV-WH White Device mount
(special oil- and gas-resistant
gasket)
CCT-1 SW20-2 Silver One-gang cover with 20a,
102/277v double-pole switch
UL Listed E-18407.
Note: All covers packed with gasket and screws.
CSA Certified LR-016807.

Two-gang device covers Blank covers

Cat. No. Description Cat. No. Color Description
Two-duplex receptacle cover Single-gang
2CCD Device mount CCB Silver Device mount
2CCD-L Device mount with lock option CCB-FS Silver Box mount
WR281-CBR Cover, self-closing lids D-PAK ®
2CCD WR281-C-WH Cover, self-closing lids S340E-20R Silver Device mount
Two-GFCI receptacle cover S340BRE-R Bronze Device mount
2CCG Device mount CCB S340WHE-R White Device mount
Two-gang
2CCB Silver Device mount
2CCG
One duplex and one GFCI receptacle cover 2CCB-FS Silver Box mount
2CCDG Device mount
2CCB
Three-gang
3CCB Silver Box mount
2CCDG
Two-single receptacle cover—1.485" Diameter opening
2CCS Device mount
3CCB
Note: Raintight when used with appropriate red•dot® boxes. All covers packed with
2CCS-L Device mount with lock option gasket and screws.
2CCS
One single receptacle and one duplex receptacle cover—1.485" Diameter Single-gang gaskets
opening
2CCSD Device mount Cat. No. Color Description
CCK Black Neoprene
2CCSD
Single receptacle and one GFCI receptacle cover—1.485" Diameter opening
2CCSG Device mount Two-gang gasket
Cat. No. Color Description

2CCSG-L Device mount with lock option R104 Black Two-Gang Gasket
R104
2CCSG
Double switch cover
2CCT Cover only, packed with spacers
2CCT-1 Cover with two single-pole 15a, 125v

switches and spacers
2CCT
Switch and one duplex receptacle cover
2CCTD Cover only, packed with spacers
2CCTD-1 Cover with one switch single-pole
15a, 125v and one duplex receptacle
and spacers
2CCTD
Switch and one GFCI receptacle cover
2CCTG Device mount cover only with spacers
2CCTG
Note: Raintight when used with appropriate red•dot® boxes. All covers packed with
gasket and screws.

Single-gang covers
2 13⁄16"
4 9⁄16" 2 13⁄16" 4 9⁄16"
4 9⁄16"
3 13⁄16"
2 27⁄32"
4 9⁄16"
3 9⁄32"
2 13⁄16"
2 3⁄8"
4 9⁄16"
2 27⁄32"
2 3⁄8" 1.485 dia.
CCD CCDV & CCGV CCG CCS CCT
2 13⁄16" 2 13⁄16" 4 9⁄16" 1 7⁄8"
2 3⁄8"
4 9⁄16"
2 3⁄8"
3 1⁄4"
3 9⁄32"
4 9⁄16"
1.555 3 9⁄32"
dia.
1.485 dia.
CCB CCSV CCMB Typical FS mount hole pattern
Two- and three-gang covers

1.485
1.485
4 5⁄8" 4 5⁄8" dia.
dia. 6 ⁄8"
3
4 9⁄16"
4 9⁄16"
4 9⁄16"
2 3⁄8"
2 3⁄8"
3 9⁄32"
3 9⁄32"
4 9⁄16"
2 3⁄8"
4 9⁄16"
3 1⁄4"
4 5⁄8" 1 13⁄16" 5 5⁄8" 4 5⁄8"

2CCSD & 2CCSG 2CCTD 2CCB 3CCB 2CCS
3 3⁄4" 4 5⁄8" 4 5⁄8" 3 3⁄4"

3 11⁄16"
4 9⁄16"
4 9⁄16"
3 ⁄32"
2 3⁄8"
3 11⁄16"
2CCD & 2CCG 2CCT 2CCTG-FS Typical FS mount

hole pattern

Weatherproof non-metallic covers
Red•Dot® Deck Grommet Pro™
Durable, textured, shrouded cover.

Eliminates the safety hazard of cords plugged in Complies with nec® “extra-duty”
to outdoor post or wall mounted outlets outlet box hoods
Now you can provide power for small appliances on
outdoor raised decks safely and conveniently with
the new Red•Dot® Deck Grommet™ PRO. When not Wiring chamber electrical box
in use, the receptacle remains concealed beneath

the deck board, showing only a stylish non-metallic
cover. The Deck Grommet™ PRO is a versatile power Duplex receptacle
solution for protecting outdoor receptacles mounted Adapter plate
on a raised deck surface.
Deck frame
Deck Grommet™ PRO complies with National
Electrical Code® (NEC) requirements for installing
receptacles in wet locations. The NEMA 3R solution
provides protection against falling rain, sleet, snow,
Device cover plate
and external ice formation. The Deck Grommet™
PRO is the first device to pass the agency testing
requirements specifically developed for receptacles
installed in a raised deck for “While-In-Use”
application.
Features & benefits:

−− Complies with NEC® Section 406.9 (B) (1) and
590.4 (D) (2) for unattended in-use plugs in wet
locations and “Extra-Duty” outlet box hoods— Swing clamps (4) Flexible outdoor rated
cord whip (3 feet)
now required for any installation.
− − Ideal for outdoor living spaces and light
commercial raised deck applications. Examples:
residential recreation areas, outdoor restaurants,
hospitality recreation areas, etc.
− − Use for easy access to power for small DKG-PRO
appliances, lighting, water fountain pumps, etc.
− − Eliminates the potential safety hazard of power
cords draping along the deck surface.
− − The power outlet remains recessed below the
Cord connector (2)
raised deck whether in use or not.
− − Duplex adapter plate provided for use with
conventional TR/WR duplex receptacle.
Red Dot® Deck Grommet PRO

Cat. Number Description Color
DKG Deck Grommet™ Black
DKG-PRO Deck Grommet™ PRO, tray pack Black
DKG

Single-gang—vertical mount
Single-gang—vertical mount
−− For use in wet/damp locations −− Paintable
− − Mounts to a box or device −− Easy to install
− − Non-metallic – won’t rust or fade − − Made in the U.S.A.
LR31146 E11461
30-Amp receptacle Single switch

For 30-amp or other single receptacles under 1.750" Diameter
Cat. No. Color Std. Ctn. Std. Wt. (lbs.) Cat. No. Color Std. Ctn. Std. Wt. (lbs.)
E98G30N-CAR Gray 10 2.1 E98SSCN-CAR Gray 10 2.1
E98SSCN-CAR
E98G30N-CAR
Duplex receptacle Toggle switch

E98GDRN-CAR Gray 10 2 E98TSCN-CAR Gray 5 1.1
E98TSCN-CAR
E98GDRN-CAR
GFCI Receptacle Blank
Device opening dimensions: 2.63" H x 1.31" W Supplied with stainless steel mounting screws and gasket
E98GFCN-CAR Gray 10 2 E980CN-CAR Gray 12 1.60
E980CM-CAR White 12 1.60
E98GFCN-CAR E980CN-CAR
15-Amp receptacle 50-Amp receptacle

For 15-amp or other single receptacles under 1.375" Diameter For 50-amp or other single receptacles under 2.250" Diameter
E98SRCN-CAR Gray 10 2.1 E98G5FN-CAR Gray 10 2
E98SRCN-CAR E98G5FN-CAR
20-Amp receptacle
−− For 20-amp or other single receptacles under 1.625" Diameter
Cat. No. Color Std. Ctn. Std. Wt. (lbs.)
E98G20N-CAR Gray 20 4.1
E98G20N-CAR

Single-gang—horizontal mount
Single-gang—horizontal mount
Duplex receptacle GFCI Receptacle
E98DHGN-CAR Gray 10 3.9 E98GHGN-CAR Gray 10 1.9
Note: Device opening dimensions: 2.63" W x 1.3" H.
E98DHGN-CAR
E98GHGN-CAR
Double-gang
− − For use in wet/damp locations
− − Mounts to a box or device
− − Non-metallic—won’t rust or fade
− − Paintable
− − Easy to install
− − Made in the u.S.A.
Two-gang blank Combination toggle/GFI

Supplied with stainless steel mounting screws and gasket
E9802CN-CAR Gray 10 2.17 E9G2GTN-CAR Gray 5 1.3
E9802CN-CAR E9G2GTN-CAR
Double duplex Combination toggle/duplex receptacle

E9G2DDN-CAR Gray 10 2.3 E9G2DSN-CAR Gray 10 1.3
E9G2DDN-CAR
E9G2DSN-CAR
Double toggle Door operated light switch

Cat. No. Color Std. Ctn. Std. Wt. (lbs.) Cat. No. Color Std. Ctn. Description
E9G2SSN Gray 6 3.2 DN415 Gray 25 Door open—light on
DF415 Gray 25 Door open—light off
E9G2SSN
DN415

Code Keeper® extra-duty non-metallic
weatherproof while-in-use covers
One cover handles GFCI, single, duplex or switch configurations

Red•Dot® Code Keeper® extra-duty non-metallic weatherproof while-in-use covers make it easier than ever to comply with
National Electrical Code ® (NEC®) requirements for receptacles in wet locations. Weatherproof covers are often subject to bumps
and impact through everyday use, but this reinforced design withstands abuse, featuring a stainless steel hinge pin for rugged
cover attachment that’s great for high-traffic areas.
Pre-configured for GFCI, each cover ships with adapter plates to accommodate single or duplex receptacles and switches.
Now, contractors can handle any application they encounter without needing dozens of different covers.
− Complies with NEC ® Section 406.9 (B) (1) and 590.4 (D) (2) for extra-duty outlet box hoods—now required in wet locations
− Robust stainless steel hinge pin—ideal for high-traffic areas
− Available in single- and two-gang configurations with a variety of cover depths
− Accommodates numerous receptacle configurations and almost every common plug and cord size
− Keyhole mounts make it fast and easy to install—just loosen existing device screws and slide cover over
− Combination box or device-mounting design provides flexibility in installation
− Lockable covers comply with OSHA lockout/tagout (LOTO) requirements
− Ships with adapter plates and pre-mounted gaskets
− Unique wasp guard included to keep out unwanted pests
Red•Dot® Code Keeper® extra-duty

non-metallic while-in-use covers
Cat. Number Top color Bottom color
Single-gang shallow—vertical or horizontal—21⁄4" deep
CKPS Clear Gray
CKPS-G Gray Gray
CKPS-W White White
CKPS-BR Bronze Bronze
Single-gang medium—vertical or horizontal—27⁄8" deep
CKPM Clear Gray
CKPM-G Gray Gray
CKPM-W White White
CKPM-BR Bronze Bronze
Single-gang large—vertical or horizontal—43⁄4" deep
CKPL Clear Gray
2CKPM Two-gang medium—27⁄8" deep
2CKPM Clear Gray
2CKPM-G Gray Gray
2CKPM-W White White
2CKPM-BR Bronze Bronze
Two-gang large — 43⁄4" deep
2CKPL Clear Gray
CKPM
*NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc.

Code Keeper® universal non-metallic
weatherproof while-in-use covers
Single-gang (CKPM) — dimensions Two-gang (2CKPM) — dimensions
4 11/16" 5 3/4" 5 9/16" 6 7/32"
6 5/8"
2 7/8"
6 5/32" (INSIDE)
3 11/32"
2 7/8" (CKPM) INCLUDING
2 5/32" (CKPS) GASKET
(INSIDE)
3 11/32" (CKPM)
2 5/8" (CKPS)
INCLUDING GASKET
Single-gang base options
GFCI, Duplex, Switch, up to 19/16" Rounds

Weatherproof metallic boxes
Universal boxes and covers
Applications: Standard finish:

−− Dry-Tite™ boxes and covers protect wiring devices, switches, − − Powder-coated finish
electronic components and terminal blocks in dry, damp and
wet locations Compliances:
−− Accessible wiring chamber provides a convenient location to − − UL® Listed (UL File No. E-28688)
maintain or change a system, pull conductors and make splices −− Boxes: CSA Certified with factory installed ground screw**
− − Junction box for branch conduits −− Covers: CSA Certified
−− Covers suitable for use in wet locations with covers closed
Features/Benefits: −− CCB and CCT series covers suitable for use in wet locations
− − Alloy A380 aluminum, certified zinc alloy and stainless steel −− Federal Spec. W-C-586
springs provide increased corrosion resistance −− NEMA 3R Rated
− − Die-cast construction and industrial design combine
to produce a rugged protective enclosure for devices Sample specifications:
on many applications −− Universal device boxes and covers shall be of aluminum alloy
− − Clean cover edges provide good gasket sealing A380 and certified zinc alloy. All conduit stops shall be free
− − Precision-cast and machined surfaces permit safer of rough edges. Covers shall have stainless steel springs.
wire pulling Covers shall be finished with powder-coated paint. Universal
− − Clear UL and cubic content markings speed approval device boxes and covers shall be Red•Dot®
by inspectors Catalog No. ____________
− − Convenient mounting lugs for a variety of mounting methods ** Consult factory for lead time and minimum quantity.
− − Securely fastened mounting plates reduce costly callbacks
Standard materials:
− − Boxes: Die-cast aluminum alloy A380
− − Cover Plates: Stamped aluminum alloy or certified die-cast
zinc alloy ZAMAK 3
− − Cover Lids: Certified die-cast zinc alloy ZAMAK 3
2CCTS
Corrosion- Stainless steel springs
Securely fastened
resistant metal
mounting plates
2IH5-1 CCD
Accessible wiring chamber provides a

convenient location to pull conductors and
make splices in dry, damp or wet locations.
−− Maximum cubic capacity

−− Securely fastened mounting plates
−− Corrosion-resistant materials
−− Ground screw included IH3-1-LM
Precision- Clean cover edges −− Precision-machined threads
Clear marking machined −− Clear UL and cubic volume marking
threads
Ground screw

Single-gang Two-gang
Cat. No. Hub size (in.) Color Cat. No. Hub Size (in.)
Three outlets Three outlets
IH3-1 1
⁄2 Silver 2IH3-1• 1
⁄2
IH3-2 3
⁄4 Silver 2IH3-2• 3
⁄4
IH3-1-LM• 1
⁄2 Silver
IH3-2-LM• 3
⁄4 Silver
D-PAK®
D-PAK®
2IH3-1 D2IH3-1 1
⁄2
DIH3-1-LM• 1
⁄2 Silver
Four outlets
DIH3-1-LM-BR• 1⁄2 Bronze
2IH4-1• 1
⁄2
IH3-1 DIH3-1-LM-WH• 1⁄2 White
2IH4-2• 3
⁄4
DIH3-2-LM• 3
⁄4 Silver
B13030G 1 Silver
Four outlets
2IH4-1
Five outlets
IH4-1 1
⁄2 Silver
2IH5-1• 1
⁄2
IH4-2 3
⁄4 Silver
2IH5-2• 3
⁄4
IH4-1-LM• 1
⁄2 Silver
IH4-2-LM• 3
⁄4 Silver
2IH5-1
D-PAK ®
Five outlets (2-side)
DIH4-1-LM• 1
⁄2 Silver
2IH5S2-1• 1
⁄2
DIH4-1-LM-BR• 1
⁄2 Bronze
2IH5S2-2• 3
⁄4
DIH4-1-LM-WH• 1
⁄2 White
B25D30G 1
IH4-1 DIH4-2-LM• 3
⁄4 Silver
2IH5S2-1
Five outlets
Seven outlets
IH5-1 1
⁄2 Silver
2IH7-1• 1
⁄2
IH5-2 3
⁄4 Silver
2IH7-2• 3
⁄4
IH5-1-LM• 1
⁄2 Silver
IH5-2-LM• 3
⁄4 Silver
2IH7-1
D-PAK®
Seven outlets (2-side)
DIH5-1-LM• 1
⁄2 Silver
2IH7S2-1• 1
⁄2
IH5-1 DIH5-2-LM• 3
⁄4 Silver
2IH7S2-2• 3
⁄4
Five outlets (2-side)
B1501SGR 1
⁄2 Silver 2IH7S2-1
Note: Raintight when used with appropriate Red•Dot® covers.
B1502SG 3
⁄4 Silver Boxes supplied with 2 closure plugs and ground screw.
• With mounting lugs
B1501SGR
Six outlets (3-side)
IH6S2-1• 1
⁄2 Silver
IH6S2-2• 3
⁄4 Silver
IH6S2-1
Note: Raintight when used with appropriate Red•Dot® covers. Boxes
supplied with 2 closure plugs and ground screw.
• With mounting lugs

Deep boxes—single- and multi-gang Extensions—single-gang

Cat. No. Hub Size (in.) Cat. No. Hub size (in.) Description
Three outlets No outlets—1" deep
IHD3-1• 1
⁄2 IHE N/A Extension ring for one-
gang box with gasket and
IHD3-2• 3
⁄4
screws
IHE
IHD3-1 IHD3-3• 1 Four outlets—13⁄8" deep
Four outlets S121E-R 1
⁄2 4-hole extension ring for
IHD4-1• 1
⁄2 one-gang box with 4
S121E-R plugs, gasket and screws
IHD4-2• 3
⁄4
IHD4-1 Two outlets, flanged—17⁄8" deep add on
Two-gang five outlets IHEF2-1 1
⁄2 2-hole flanged box exten-
2IHD5-1• 1
⁄2 IHEF2-2 3
⁄4 sion adapter with 1 plug
IHEF2-1 gasket and screws
2IHD5-2• 3
⁄4
Six outlets, flanged—17⁄8" deep add on
2IHD5-1 2IHD5-3• 1
IHEF6S2-1 1
⁄2 6-hole flanged box
Two-gang seven outlets extension adapter with 4
IHEF6S2-2 3
⁄4
2IHD7S2-3 1 IHEF6S2-1 plugs, gasket and screws
2IHD7S2-3
B37D20G 3
⁄4
B37D305 1
B37D20G
Close-up plugs—zinc Extensions—Two-gang

Cat. No. Hub Size (in.) Color Material Deep
PLG-1-RD 1
⁄2 Silver Zinc 2IHE N/A 0 Extension ring
for two-gang
PLG-2-RD 3
⁄4 Silver Zinc boxes with
PLG-3-RD 1 Silver Zinc gasket and
PLG-1-RD
screws
2IHE
D-PAK®
DPLG-1 1
⁄2 Silver Zinc Extensions—Round
DPLG-1-BR 1
⁄2 Bronze Non-metallic Four outlets—15⁄8" deep
DPLG-1-WH 1
⁄2 White Non-metallic S130E 1
⁄2 4 Round
DPLG-1 extension with
DPLG-2 3
⁄4 Silver Zinc
gasket and
SE-48 3
⁄4 4 screws
S130E
Mounting lugs
LM 2 Mounting lugs with self-
tapping screws, for LM
boxes only
LM

Single-gang boxes Single-gang extension rings
F IHE4-1 IHE
2 13⁄16" 2 13/16"
E
H B J
3 9⁄ 32"
4 9⁄16" 3 9⁄ 32" 4 9⁄16"
D
G C
A
IH
1 3⁄ 8" 1"
1 1⁄ 2"
Two-hole flanged box Six-hole flanged box
extension adapter extension adapter
IHEF2 (Add-On) IHEF6S2 (Add-On) Dimensions (in.)
Cat. No. Hub Size A B C D E F G H J CI
IH-1 ⁄21
4 9⁄16 213⁄16 2 5
⁄8 — — 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 17.3
IH-2 3
⁄4 4 9⁄16 213⁄16 2 5
⁄8 — — 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 17.0
3 9⁄32" 3 9⁄ 32" 4 1⁄2" IH-LM-1 1⁄ 2 4 9⁄16 213⁄16 2 5
⁄8 3 13⁄16 3 1⁄ 2 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 17.3
4 1⁄2"
IH-LM-2 3⁄4 4 9⁄16 213⁄16 2 5
⁄8 3 13⁄16 3 1⁄ 2 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 17.0
IH-S-1 1
⁄2 4 9⁄16 213⁄16 2 5
⁄8 3 13⁄16 3 1⁄ 2 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 17.0
IH-S-2 3
⁄4 4 9⁄16 213⁄16 2 5
⁄8 3 13⁄16 3 1⁄ 2 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 17.0
IHD3-1 1
⁄2 4 9⁄16 213⁄16 2 5⁄ 8 5
⁄8 3 13⁄16 3 1⁄ 2 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 24.8
IHD3-2 3
⁄4 4 9⁄16 213⁄16 2 5⁄ 8 5
⁄8 3 13⁄16 3 1⁄ 2 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 24.8
3 1⁄2" 3 1⁄2"
IHD3-3 1 4 9⁄16 213⁄16 2 5⁄ 8 3
⁄4 3 13⁄16 3 1⁄ 2 3 1⁄ 4 1 7⁄ 8 1 1⁄ 2 23.5
1 7⁄8" 1 7⁄8"
7
⁄8"
7
⁄8"
1 ⁄2"
1
Two- and three-gang boxes Two-gang extension ring Dimensions (in.)

2IH & 3IH 2IHE CAT. NO. A B C D E F G H J K L M CI
A 4 5⁄ 8 " 2IH3 49⁄16 45⁄8 21⁄16 ⁄8
5
5 31⁄2 317⁄32 33⁄4 — — 31⁄4 39⁄16 31.8
G
3 5⁄ 8 " 2IH4 49⁄16 45⁄8 21⁄16 5
⁄8 5 31⁄2 317⁄32 33⁄4 11⁄2 — 31⁄4 39⁄16 31.8
K 2IH5 49⁄16 45⁄8 21⁄16 5
⁄8 5 31⁄2 317⁄32 33⁄4 11⁄2 — 31⁄4 39⁄16 31.8
J EM HB 2IH5S2 49⁄16 45⁄8 21⁄16 5
⁄8 5 31⁄2 317⁄32 33⁄4 — — 31⁄4 39⁄16 31.8
K
2IH7 49⁄16 45⁄8 21⁄16 5
⁄8 5 31⁄2 317⁄32 33⁄4 — 11⁄2 31⁄4 39⁄16 30.3
D L 2IH7S2 49⁄16 45⁄8 21⁄16 5
⁄8 5 31⁄2 317⁄32 33⁄4 11⁄2 — 31⁄4 39⁄16 32.0
4 5⁄ 8 "
3 3⁄ 4"
C F
2IHD5 49⁄16 45⁄8 217⁄32 3
⁄4 5 31⁄2 317⁄32 33⁄4 13⁄16 — 31⁄4 39⁄16 40.3
3IHD7 49⁄16 67⁄16 217⁄32 13⁄16 613⁄16 31⁄2 31⁄4 55⁄8 — 13⁄16 31⁄4 39⁄16 54.8
1"

Round boxes, extensions and covers
Applications:
−− Junction for branch conduits
− − Spacious, accessible wiring chamber provides a
convenient location to maintain or change a system,
pull conductors and make splices
Features/Benefits:
−− Copper-free* aluminum provides increased corrosion
S-47
resistance
− − Precision-cast and machined surfaces permit safer
Boxes
wire pulling
Cat. No. Color Hub size (in.) Description
− − Clean cover edges provide good gasket sealing
Five outlets, 41⁄8" diameter
− − Precision NPT threads enable trouble-free field installation S-47 Silver 1
⁄2 5 Outlets, cast
for rigid, IMC or EMT conduit S47CFB Silver 1
⁄2 Ceiling fan box and cover rated for
− − Deep-slotted stainless steel cover screws for faster 50 lb. Fixture or 35 lb. Fan
installation S-48 Silver 3
⁄4 Mounting lugs, 4 closure plugs
− − Clear UL® and cubic content markings speed approval S48CFB Silver 3
⁄4 Ceiling fan box and cover rated for
50 lb. Fixture or 35 lb. Fan
by inspectors
D-pak®
DS-47 Silver 1
⁄2 5 Outlets
Standard materials: DS-47-BR Bronze 1
⁄2 5 Outlets
−− S Boxes: Die-cast aluminum alloy A380 DS-47-WH White 1
⁄2 5 Outlets
−− SS-B Cover: Stamped aluminum DS-48 Silver 3
⁄4 5 Outlets
−− Gaskets: Composition DS-48-BR Bronze 3
⁄4 5 Outlets
DS-48-WH White 3
⁄4 5 Outlets
Standard finish: DS-47B Silver 1
⁄2 With blank cover
−− Powder-coated finish DS-48B Silver 3⁄4 With blank cover
Note: Boxes are raintight when used with appropriate Red•Dot® covers.
All covers packed with gasket and screws.
Compliances:
−− UL ® Listed
−− Federal Spec. W-C-586B
−− Sample Specifications:
−− Outlet boxes and covers shall be die-cast copper-free*
aluminum alloy A380 (“S”). Outlet boxes and covers shall
be finished with powder-coated paint.
Outlet boxes and covers shall be Red•Dot®.

Catalog No. _______________
* Less than .004% copper content. S130E
** S Boxes — Die-cast aluminum alloy A380.
4½" Round extensions
Four outlets, 41⁄8" diameter, 15⁄8" deep
S130E Silver 1
⁄2 4 Outlets
SE-48 Silver 3
⁄4 4 Closure plugs, gasket and screws

Round boxes, extensions and covers
Outlet boxes, extensions
A A A
F
D
E
A
G
SS-B S-1 S-3 SS-B SJ-11 SJ-21 SJ-31

S-47 G S130E
F S-12
S-48 SE-48 B
B B
A
A
B
H
CB B
C
Dimensions (in.)
Cat. No. Hub Size A B C D E F G H CI
S-47 1
⁄2 41⁄8 15
⁄8 3
⁄4 59⁄16 4 15⁄16 31⁄2 31⁄8 11⁄4 17.0
S130E 1
⁄2 41⁄8 15
⁄8 13
⁄16 — — 3 1⁄2 31⁄16 — 18.3
S-71 1
⁄2 41⁄8 15
⁄8 3
⁄4 59⁄16 4 15⁄16 31⁄2 31⁄8 11⁄4 16.3
S-48 3
⁄4 4 ⁄8
1 15
⁄8 7
⁄8 5 ⁄16
9
4 ⁄16
15
3 ⁄21
3 ⁄8
1
11⁄4 17.0
SE-48 3
⁄4 41⁄8 15
⁄8 13
⁄16 — — 3 1⁄2 31⁄16 — 18.3
SS-B — 4 1⁄8 3
⁄64 — — — — — — —
S-1 1
⁄2 41⁄8 13
⁄3 — — — — — — —
S-12 3
⁄4 41⁄8 3
⁄8 — — — — — — —
S-3 1
⁄2 41⁄8 11
⁄16 — — — — — — —
SS-B — 4 1⁄2 3
⁄8 — — — — — — —
SJ-11 1
⁄2 41⁄2 3
⁄8 — — — — — — —
SJ-21 1
⁄2 41⁄2 1 — — — — — — —
SJ-31 1
⁄2 41⁄2 1 — — — — — — —
Round lampholder covers 4 1⁄ 8" Round blank covers

− − Heavy-duty die-cast construction SS-B CCRSB
− − Powder-coat finish in silver, bronze or
white
− − Three-hole cover is supplied with a 1⁄2"
closure plug
−− Supplied with sealing gasket and cover
screw
No. of Outlet Std. Cat. No. Color Description

Cat. No. Outlet Holes Size Color Ctn.
4 1⁄8" Diameter
S211E 1 1/2 Silver 25
SS-B Silver Weatherproof cover with gasket and screws
S211BRE 1 1/2 Bronze 25 5" Diameter
S211WHE 1 1/2 White 25 CCRSB White Mounting holes 23⁄4" on center (not raintight)
S201E 2 3/4 Silver 25 CCRB White Mounting holes 31⁄2" on center (not raintight)
S213E-15R 3 1/2 Silver 25 Note: Covers are raintight when used with appropriate Red•Dot® boxes. All covers
S213BRE-9R 3 1/2 Bronze 25 S211E packed with gasket and screws.
S213WHE-9R 3 1/2 White 25
UL Listed E-51763.
CSA Certified LR-18685.

Weatherproof non-metallic fixtures and boxes
Red•Dot® non-metallic weatherproof fixtures
Weatherproof T Boxes
− − Red•Dot® Weatherproof T Boxes are for use with non-metallic wiring systems only
−− Can be used with Red•Dot ® lampholder
Single-Gang T Box Double-Gang T Box

− − With three 1⁄2" threaded holes −− With three 1⁄2" and four 3⁄4" threaded holes
−− Mounting feet included −− Mounting feet included
Cat. No. Color Size (in.) Cat. No. Color Size (in.)
E381D-CAR Gray /
1 2
E382DE Gray /
1 2
E382DE
E381DW-CAR White /
1 2
E382DEW White /
1 2
E381D-CAR
Round T Box
− − With five 1⁄2" threaded holes
−− Mounting feet included
E365D-CAR
Cat. No. Color Size (in.)
E365D-CAR Gray /
1 2
E365DW-CAR White /
1 2

Weatherproof metallic lampholders
Lampholders, garden lights and accessories
Applications: Heat-resistant gasket Porcelain

− Security and general outdoor lighting fixture for residential socket
and commercial applications Corrosion-

− Accent lighting fixture for highlighting outdoor signs and resistant metal
architectural details
− Compact outdoor lighting fixture that can be mounted easily
in most places and aimed in any direction
Locking arm
Features/Benefits:
− Clean lines and precision manufacturing result in a fixture
that will enhance any application
− High-quality replaceable porcelain socket with high-
temperature leads enables easy field maintenance
Ground
− Positive-locking mounting arm keeps fixture in aimed position screw
to reduce costly callbacks
− Ground screw boss in arm
Standard materials:
− Fixture: Certified die-cast zinc alloy ZAMAK 3
− Gasket: Heat-resistant composition or high-temperature
silicone
− Socket: Center contact, porcelain, medium base S500EG
Standard finish:
− Powder-coated finish
− Chrome-plated zinc
Compliances:
− UL® Listed L-800
− Suitable for use in wet locations
Sample specifications:
S500E-RL
− Lampholders shall be certified die-cast zinc alloy ZAMAK
3. Lampholder will have positive-locking mounting arm and
replaceable socket. Fixture shall be Red•Dot® Dry-Tite™.
Catalog No. _______________ for use with _______________
Watt incandescent lamp.
S513E-RL

Lampholders
Lampholders, die-cast zinc zamak 3

Cat. No. Color Lamp max. Description
Standard
S500E-RL Silver
150W• PAR 38 or Inside gasket and ground
R40 screw
S500BRE-RL Bronze — —
S500WHE-RL White — —
Gasketed
S500EG Silver 150W• PAR 38 or Heavy-duty slip-on gasket
R40 and ground screw LG-80
S500E-RL S500EG
Deep-shielded
L-800 — 150W• PAR 38 or Inside gasket and ground
R40 screw
Wireguard
LG-80 — — Mounts to L-80 series
lampholder
L-800
Spike lights
Portable mount
For use with 150-watt lamp
−− Lampholders are heavy-duty die-cast construction
− − Lampholders have powder-coat green finish
− − Current-carrying components are copper or copper alloy and
sockets are porcelain
−− Factory wired
Portable spotlights

K780BR Bronze 150W• PAR 38 or Deep-shielded lampholder,
R40 ground spike, wall bracket,
gasket and screws
Decorative floodlight

S513E-RL Silver 150W• PAR 38 Two lampholders round cover,
or R40 inside ground screws

Lampholders and assemblies
Use with medium-base PAR lamps to 150 watts.
Hooded lampholders
− − Heavy-duty die-cast zinc lampholder
− − Corrosion-resistant aluminum hood
− − Factory provided with a 3-wire, 8” pre-stripped lead
Cat. No. Description Std. Ctn.
WH90 Silver, 51/2" diameter hood 6 WH90
Gasket
G1 Heat-resistant sealing gasket 100
Adapters
− − Heavy-duty die cast construction
− − Natural cast finish
AD11-2 “Y” Adapter—converts one outlet to two—1/2" threads 10
UL Listed E-51763

Lampholder covers
Round lampholder covers

Standard covers

Gaskets and screws, 41⁄8" diameter
S211E Silver 1
⁄2 One tapped hole
S-12 Silver 3
S213E-15R Silver 1
⁄2 Three tapped holes
D-PAK®
S211E Silver 1
S211BRE Bronze 1
⁄2 One tapped hole S211E S-12 S213E-15R
S211WHE White 1
S213E-15R Silver 1
S213BRE-9R Bronze 1
S213WHE-9R White 1
S621E — — Universal gasket
Jumbo covers
Gaskets and screws, 41⁄2" diameter
SJ-11 Silver 1
SJ-21 Silver 1
⁄2 Two tapped holes
SJ-31 Silver 1
Note: Covers are raintight when used with appropriate Red•Dot® boxes. All covers
packed with gasket and screws.
SJ-11 SJ-21 SJ-31
Single-gang lampholder covers

Cat. No. Color Size (in.) Description
Standard Jumbo
( 213⁄16" x 41⁄2") (31⁄8" x 41⁄2")
S201E LF11 — 1
⁄2 One-hole device mount
LC-21 — — 1
⁄2 Two-hole device mount
S203E-R LF31 — 1
⁄2 Three-hole device mount
D-PAK®
S203E-R — Silver 1
S203BRE — Bronze 1
S203WHE — White 1
S201E LC-21 S203E-R

Dimensions and photometrics
Dimensions in inches
2 13⁄16" 3 1⁄ 8" F
D
E
G
4 9⁄16"
3 9⁄ 32"
3 9⁄32"
4 1⁄ 2"
5 1⁄ 8"
15⁄32" 15⁄32" G
F
A
A
11⁄16" S-47 H S130E

1"
S201E S203E-R LF-11 LF-31 CB B
S-48 SE-48 C
A
A A Dimensions (in.)
Cat. No. Hub Size A B C D E F G H CI
S-47 1
⁄2 41⁄8 15
⁄8 3
⁄4 5 9⁄16 4 15⁄16 31⁄2 3 1⁄8 1 1⁄4 16.0
A
S130E 1
⁄2 41⁄8 15
⁄8 13
⁄16 — — 31⁄2 3 1⁄16 — 18.3
S-48 3
⁄4 41⁄8 15
⁄8 7
⁄8 59⁄16 4 15⁄16 31⁄2 3 1⁄8 1 1⁄4 17.0
SE-48 3
⁄4 6 41⁄8 15
⁄8 13
⁄16 — — 31⁄2 3 1⁄16 — 18.3
SS-B S211E S213E-15R SJ-B SJ-11 SJ-21 SJ-31
S-12 SS-B — 4 1⁄8 3
⁄64 — — — — — — —
B B B S211E ⁄2 1
41⁄8 13
⁄3 — — — — — — —
B
S-12 3
⁄4 41⁄8 3
⁄8 — — — — — — —
S213E-15R 1⁄2 41⁄8 11
⁄16 — — — — — — —
5
⁄ 32" 5
⁄32"
2 ⁄ 4"
3 SJ-B — 41⁄2 3
⁄8 — — — — — — —
3 1⁄ 2" SJ-11 1
⁄2 41⁄2 3
⁄8 — — — — — — —
SJ-21 1
⁄2 41⁄2 1 — — — — — — —
SJ-31 1
⁄2 41⁄2 1 — — — — — — —
5"
CCRB CCRSB
Photometrics
Photometrics are strictly a function of the lamp used.
150 PAR 38/FL
6
(Candelas, Thousands)
6 5⁄16"
6 ⁄ 2"
1
4 150 PAR/FL
4 3⁄ 4" 5 5⁄32"
Candle Power
0 10 20 30 40 50 60
1 5⁄ 8 " Degree from Beam Axis
2" 150 PAR 38/SP
S500E-RL L-800 15
(Candelas, Thousands)
12
9 150 PAR/SP
Candle Power
6
3
0 10 20 30 40 50 60
Degree from Beam Axis

Outdoor lighting
Sitelight® landscape lights
Corrosion-resistant metal Sample Specifications:

−− Fixture shall be certified die-cast zinc alloy ZAMAK 3; socket shall be porcelain,
Powder-coated finish center contact and replaceable; socket shall have extended leads for easy
wiring; fixture shall be Red•Dot® Dry-Tite™
−− Catalog No. _______________
5 1⁄ 4" 5 1⁄ 4"
7" 8 1⁄ 2"
Glass globe
Porcelain socket
B330 B440
Applications: Photometrics:
− − Lighting for walkways, paths or driveways Based on lamp center 24"
−− Accent lighting for garden and terrace areas above ground
− − Ground-level security lighting
Based on 100-Watt A-19
Features/Benefits: inside-frosted 1750-lumen
− − Certified zinc alloy provides increased corrosion resistance lamp. For other wattage see
− − High-quality replaceable porcelain socket with high- table below.
temperature leads enables easy field maintenance .25 .55 .2 .08 .045 .035 .02 .015
Wattage Multiplier
Standard materials: 100 1.0
− − Fixture: Die-cast zinc alloy ZAMAK 3 75 .68
−− Globe: Lime crystal glass 60 .44
− − Socket: Center contact, porcelain, medium base 50 .27
40 .26
25 .13
Standard finish:
− − Green powder-coated finish
−− Bronze powder-coated finish
Iso Foot Candles
Compliances:
−− UL® Listed
− − Suitable for use in wet locations

Three tier
B330BRE-R Bronze 75 12" extended leads, gasket and
ground screw globe
VGL-075 Clear 75 Glass globe
Four tier
B440BRE-R Bronze 75 12" extended leads,
gasket and ground screw globe
VGL-01 Clear 75 Glass globe
Note: Lamp not included. B330BRE-R B440BRE-R

Step up to SiteLight® line voltage outdoor lighting
Planning your outdoor lighting
On graph paper, outline your home and grounds. Indicate key
features you wish to highlight such as stairways, statuary,
shrubbery or flowering plants. SiteLight Spot lights and swivel
lights provide focused illumination to showcase these areas.
The diagrams below show how you can achieve three special
lighting effects with SiteLight spot lights and swivel lights.
Grazing from side Uplighting from Silhouetting from

or bottom to show below makes details behind provides
texture stand out drama
For decks, post sconce lights mounted on deck posts provide Compare SiteLight to low-voltage sets
glare-free perimeter lighting and mid-stair lighting. Post Top −− SiteLight is up to five times brighter than low-voltage—
Lights are ideal for lighting stairs and rails. more light with fewer fixtures than with low-voltage sets
−− SiteLight gives you flexibility in spacing, the number of
Use SiteLight path lights and swivel lights for pathways, fixtures and the length-of-run. Light where you need it—
driveways and general garden lighting. The chart below will help low-voltage sets have a fixed limit on length-of-run and the
you determine fixture spacing. number of fixtures
− − SiteLight uses regular household current—no expensive low-
Bright and even Medium dappled Soft mood voltage transformer to purchase or replace
8'-10' 12'-18' Over 20' − − SiteLight uses readily available, standard bulbs—
low-voltage bulbs are often found only where sets are sold
SiteLight line voltage outdoor lighting
−− SiteLight lets you add on fixtures by tapping into run—
For outdoor lighting, nothing compares to the full power (120V)
low-voltage sets will generate even less light if transformers
and beauty of SiteLight. SiteLight uses regular household
are at capacity
voltage and standard bulbs that are readily available. There are no
expensive transformers to purchase or replace. With SiteLight®,
SiteLight meets every outdoor lighting need
you can add fixtures when and where you want them and still
−− From soft, indirect deck lighting to brilliant, focused spot
enjoy lighting that is up to five times brighter than low-voltage.
lighting, use SiteLight to beautify any property while
enhancing safety and security
Use SiteLight to highlight gardens, statuary, shrubbery and to
− − Lighting for walkways, pathways and driveways
effectively light decks, stairs, pathways, pools and driveways.
−− Stairway, perimeter and task lighting for decks
SiteLight meets every outdoor lighting need…from soft, indirect
− − Accent and ambient lighting for pool/patio and garden areas
deck lighting, to brilliant, focused spot lighting. Use SiteLight to
−− Highlighting to emphasize landscape details or specific objects
beautify your property while enhancing safety and security.
−− Ground-level safety/security lighting to illuminate dark areas
Step up to SiteLight line voltage outdoor lighting and add

permanent value to your home.

Outdoor lighting
We’ve made installation easy

Everything you need is included in the SiteLight® Kit, except a bulb, supply cable and tools (screwdriver, wire strippers, etc.). Only
three connections are required to wire each fixture to the supply cable. With the SiteLight PVC in-ground mounting tube, there
is no need to pour concrete to secure the fixtures. Just position the tube and pack dirt around it. Attach your SiteLight® to the
mounting tube and your installation is complete.
SiteLight is designed for a lifetime of trouble-free use. SiteLight is high-quality, permanent lighting built to add value and beauty to
your home.
Applications: Compliances:
− − Lighting for walkways, pathways and driveways −− UL Listed
− − Stairway, perimeter and task lighting for decks −− Suitable for use in wet locations
− − Accent and ambient lighting for pool/patio and garden areas − − Ground mounting (suitable for use 4' or less above grade
−− Highlighting to emphasize landscape details or specific objects level) except K852BR and K861BR
− − Ground-level safety/security lighting to illuminate dark areas
Sample specifications:
Features/Benefits: − − Fixture shall be die-cast copper-free* aluminum alloy A360,
− − Copper-free* aluminum construction provides increased with bronze powder-coated finish. Sockets shall be porcelain,
corrosion resistance center contact, brass screw shell-medium base for K811BR,
− − Sturdy die-cast aluminum construction provides durability K812BR, K821BR, K822BR, K831BR, K841BR and K861BR
−− Architectural bronze color blends into landscape and deck areas fixtures. Sockets shall be molded plastic with candelabra
− − High-quality, replaceable porcelain socket with brass screw screw base for K851BR and K852BR fixtures. All sockets
shell (except K851BR, K852BR) shall have extended leads for easy wiring.
− − Aluminum mounting tube cap houses and protects wire
connection (ground-installed fixtures) Easy to install:
− − PVC ground tube provides an innovative installation method − − Only three wire connections per fixture are required
saving costly labor and traditional installation materials − − No need to pour concrete
(ground-installed fixtures) −− All connections are made above ground
−− Wire connectors and ground wire enable safe, easy connections
− − Tempered glass lens and silicon gaskets keep socket dry
Quality construction Rustproof cast- aluminum
(K831BR, CS841BR, K861BR)
top removes easily for bulb
− − Positive locking arm can be adjusted to the desired position replacement
(K831BR, CS841BR, K861BR) Shatterproof lens
Porcelain socket
− − Fixtures use regular household voltage (120V) With brass screw shell
Architectural bronze color

Standard materials: blends into landscape
− − Fixture: Die-cast aluminum alloy A360 with less than .004% Aluminum base
for durability
copper content (copper free*)
Stainless steel screws
− − Lens: Tempered glass (K831BR, CS841BR, K861BR)
Aluminum mounting
− − Lens: Polycarbonate (K811BR, K812BR, K821BR, K822BR, tube cap houses wire
connections
K851BR) Wire connectors and
ground wire for safe, easy
− − Socket: Porcelain, center contact, brass screw shell,
power connections
medium base (K811BR, K812BR, K821BR, K822BR, 13" Pvc mounting
Tube provides a permanent
K831BR, CS841BR, K861BR), molded plastic socket with base for fixture and large
candelabra base (K851BR and K852BR) opening to feed wires
− − Mounting Tube: Gray PVC, schedule 40 (ground-installed
fixtures)
Standard finish:
− − Bronze powder-coated finish
* Less than .004% copper content

ISO Foot Candles Values 7.5"/10" Path light—See pages 37-38 for specifications
based on .45-ft. mounting
height and a 40- watt A15 Cat. No. Description Lamp required Spacing
clear 400-lumen lamp. K812BR 7.5"/10" Path light with A15 40W (max.)/120V 8'-10' apart:
13" x 2" schedule 40 medium base bright and
PVC mounting tube even, 12'-18'
apart: medium
dappled, 20'
or more: soft
mood
Note: Fixture can be configured for either height—extension sleeve included.
K812BR, 7.5" Height Option
ISO Foot Candles Values

height and a 40- watt A15
clear 400-lumen lamp.
K812BR, 10" Height Option
ISO Foot Candles Values 7.5"/10" Path light—See pages 39-40 for specifications
height and a 40- watt A15 Cat. No. Description Lamp required Spacing
K822BR 7.5"/10" Path light with A15 40W (max.)/120V 8'-10' apart:
13" x 2" schedule 40 medium base bright and
PVC mounting tube even, 12'-18'
apart: medi-
um dappled,
20' or more:
soft mood
Note: Fixture can be configured for either height—extension sleeve included.
K822BR, 7.5" Height Option

height and a 40- watt A15
K822BR, 10" Height Option

Outdoor lighting
ISO Foot Candles Values based Ground spot light—See page 41 for specifications
on 3-ft. setback from a vertical
wall and a 100-watt incandescent Cat. No. Description Lamp required Spacing
1321-lumen lamp.
CS841BR Ground spot light with R20 100W One to two for
13" x 2" schedule 40 (max.)/120V medium each object to
PVC mounting tube base be hightlighted
or as required
for special
lighting effects
CS841BR

based on 1-ft. mounting 17.5" Swivel light—See page 42 for specifications
height and a 60-watt A15 Cat. No. Description Lamp required Spacing
incandescent 740-lumen
lamp tilted 45˚ degrees. K831BR 17.5" Swivel light with General lighting: A15 General light-
13" x 2" schedule 40 60W (max.)/120V ing: 8'-10'
PVC mounting tube medium base spot apart: bright
lighting: R16 60W and even,
(max.)/120V medium 12'-18' apart:
base medium
dappled, 20'
or more: soft
mood, spot
lighting: one
to two for
each object to
K831BR be highlighted
ISO Foot Candles Values based

on 1-ft. mounting height from Post sconce light—See page 43 for specifications
light opening of luminaire to Cat. No. Description Lamp required Spacing
ground stair and a 10-watt
G121⁄2 80-lumen lamp on lens K851BR Post sconce light with G121⁄2 10W (max.)/ On each post or
1-ft. above ground or stair. metal black plate and 120V candelabra every other post
mounting hardware base depending on
desired brightness,
mounts to standard
4 x 4 post
K851BR

based on 4-ft. mounting height Post top light—See page 44 for specifications
from center of light opening to Cat. No. Description Lamp required Spacing
base of deck and a 15-watt
G121⁄2 100-lumen lamp. K852BR Post top light with G121⁄2 10W (max.)/ On each post or
metal black plate and 120V candelabra every other post
mounting hardware base depending on
desired brightness,
mounts to standard
4 x 4 post
K852BR

based on 8-ft. mounting height Wall spot—See page 45 for specifications
and a 100-watt 1321-lumen Cat. No. Description Lamp required Spacing
lamp tilted 45˚ degrees.
K861BR Wall spot with cover R20 100W (max.)/ One to two on most
(box not included) 120V medium base average size decks
or exterior walls
K861BR
Accessories
K805BR-8 Mounting tube and cap
K805BR-8

Outdoor lighting
K812BR specifications
Dimensions ISO foot candles

−− 7.5" height option − − Values based on .45 (5.4") foot mounting height and a 40-
watt A15 clear 400-lumen lamp.
5 1⁄ 4" 5 1⁄ 4"
3 1⁄ 8"
(10.8") 2
10 5 2
1 ⁄ 4"
1
10
2 5⁄16" 10
Distance in Units of Mounting Height

(5.4") 1
1 1⁄16" 7 1⁄ 2" 20
0
7 1⁄ 2" 1 .5
(5.4") 1
(10.8") 2
(16.2") 3
(21.6") 4
0 1 2 3 4 5 6 7
(5.4") (10.8") (16.2") (21.6") (27") (32.4") (37.8")
13 1⁄8" (±1⁄4) Deg Candela Lumens

0 4 —
90° 5 4 0
15 6 2
75° 25 7 3
35 6 4
15° 45 7 5
Candle Power
60° 55 11 11
65 30 28
See following page for 10" height. 75 31 33
30°
85 32 34
45°
Zonal lumen summary 90 30 —
Percent of lamp output 95 24 21
Zone deg. Lumens based on 400 lumens Percent of total output 105 3 3
45°
0-30 5 1.4 3.6 115 2 2
0-40 9 2.3 6.2 0° 15° 30°
125 2 2
0-60 26 6.4 17.1 135 1 1
0-90 121 30.2 80.7 145 1 1
90-120 26 6.5 17.4 155 0 0
90-130 27 6.8 18.3 165 0 0
90-150 29 7.2 19.3 175 0 0
90-180 29 7.2 19.3 180 0 —
0-180 150 37.4 100.0
Note: Total luminaire efficiency=37.4%.

Outdoor lighting

− − 10" height option − − Values based on .67 (8.04") foot mounting height and a 40-
5 1⁄ 4" 5 1⁄ 4"
3 1⁄ 8"
(16.08") 2 5 2 1
1 1⁄ 4" 10
2 5⁄16" 10

(8.04") 1
20
1 1⁄16"
10"
10" 0
.5
(8.04") 1
(16.08") 2
(24.12") 3
(36.16") 4
0 1 2 3 4 5 6
(8.04") (16.08") (24.12") (36.16") (40.2") (48.24")
90°
13 1⁄8" (±1⁄4)
75°
15°
Candle Power
60°
30° Deg Candela Lumens

45° 0 4 —
5 4 0
See previous page for 7.5" height. 15 6 2
45°
25 7 3
0° 15° 30° 35 6 4
45 7 5
Zonal lumen summary 55 11 11
Zone deg. Lumens based on 400 lumens Percent of total output
75 31 33
0-30 5 1.4 3.6
85 32 34
0-40 9 2.3 6.2
90 30 —
0-60 26 6.4 17.1
95 24 21
0-90 121 30.2 80.7
105 3 3
90-120 26 6.5 17.4
115 2 2
90-130 27 6.8 18.3
125 2 2
90-150 29 7.2 19.3
135 1 1
90-180 29 7.2 19.3
145 1 1
0-180 150 37.4 100.0
155 0 0
165 0 0
175 0 0
180 0 —

Outdoor lighting

− − 7.5" height option − − Values based on .45 (5.4") foot mounting height and a 40-
4 1⁄ 4" 49⁄16"
3 1⁄ 8"
(10.8") 2
10 5 2
1" 10
2 ⁄16"
5

(5.4") 1 10
1 1⁄16" 7 1⁄ 2"
0
7 1⁄ 2" 1 .5
(5.4") 1
(10.8") 2
(16.2") 3
(21.6”) 4
0 1 2 3 4 5 6 7
(5.4”) (10.8”) (16.2”) (21.6”) (27”) (32.4”) (37.8”)
13 1⁄8" (±1⁄4)
90°
75°
15°
Candle Power
60°
See following page for 10" height. 30°

Deg Candela Lumens
45°
0 2 —
Zone deg. Lumens based on 400 lumens Percent of total output 45°
25 4 2
0-30 3 0.7 2.4 0° 15° 30°
35 4 2
0-40 5 1.3 4.5
45 6 4
0-60 19 4.8 16.3
55 10 10
0-90 111 27.8 94.6
65 29 27
90-120 6 1.5 5.2
75 31 32
90-130 6 1.6 5.4
85 31 33
90-150 6 1.6 5.4
90 22 —
90-180 6 1.6 5.4
95 3 4
0-180 118 29.4 100.0
105 1 1
115 1 0
125 0 0
135 0 0
145 0 0
155 0 0
165 0 0
175 0 0
180 0 —

Outdoor lighting

− − 10" height option − − Values based on .67 (8.04") foot mounting height and a 40-
4 1⁄ 4" 49⁄16"
3 1⁄ 8"
(10.8") 2
10 5 2
1" 10
2 ⁄16"
5

(5.4") 1 10
1 1⁄16"
10"
10" 0
1 .5
(5.4") 1
(10.8") 2
(16.2") 3
(21.6”) 4
0 1 2 3 4 5 6 7
(5.4”) (10.8”) (16.2”) (21.6”) (27”) (32.4”) (37.8”)
90°
13 1⁄8" (±1⁄4)
75°
15°
Candle Power
60°
30°
Deg Candela Lumens
45°
0 2 —
5 2 0
See previous page for 7.5" height. 15 3 1
45°
25 4 2
0° 15° 30°
35 4 2
45 6 4
55 10 10
65 29 27
Zone deg. Lumens based on 400 lumens Percent of total output 90 22 —
0-30 3 0.7 2.4 95 3 4
0-40 5 1.3 4.5 105 1 1
0-60 19 4.8 16.3 115 1 0
0-90 111 27.8 94.6 125 0 0
90-120 6 1.5 5.2 135 0 0
90-130 6 1.6 5.4 145 0 0
90-150 6 1.6 5.4 155 0 0
90-180 6 1.6 5.4 165 0 0
0-180 118 29.4 100.0 175 0 0
180 0 —

Outdoor lighting
CS841BR specifications

− − Values based on 3 (36") foot setback from a vertical wall and
3 1⁄ 8" a 100-watt incandescent 1321-lumen lamp.
Dia.
5 5⁄ 8 " (216") 6 Note: This ISO Foot Candle

diagram was produced by tilting
.02

.05 the photometric data for this
(180") 5 luminaire 45° above horizontal.
.1
4
(144") .2
3
3 3⁄ 4" .5
(108")
1
(72") 2
3 1/16" Dia. 2
3 1⁄ 8" (36")
1 5
10
.01 .005 .002
0
0 1 2 3 4 5 6
6 5⁄ 8 " (36") (72") (108") (144") (180") (216")
9
⁄16" Distance in Units of Mounting Height
1
⁄ 4"
13 1⁄ 8" (±1⁄4)
13
⁄16"
2 15⁄16"
90°
0°
75°
15° Legend
Candle Power
0–Deg:
60° 90–Deg:
180–Deg:
30°
45°
45°
0° 15° 30°
Zonal lumen summary
Percent of lamp output
0-30 104 7.9 47.7
0-40 165 12.5 75.3
0-60 214 16.2 97.7 Candela distribution horizontal degrees
0-90 219 16.6 100.0 0.0 45.0 90.0 135.0 180.0 Flux
90-120 0 0.0 0.0 0 136 136 136 136 136 —
90-130 0 0.0 0.0 5 132 132 133 136 138 13
90-150 0 0.0 0.0 15 127 124 125 128 131 36
90-180 0 0.0 0.0 25 124 121 117 126 122 56
0-180 219 16.6 100.0 35 58 77 106 125 122 61
Note: Total luminaire efficiency=16.6%. 45 9 12 35 93 109 37
Vertical degrees
55 5 6 9 14 31 11
65 0 1 4 6 8 4
75 0 0 0 2 3 1
85 0 0 0 0 1 0
90 0 0 0 0 1 —

Outdoor lighting

General Lighting − − Values based on 1 (12") foot mounting height and a 60-watt
A15 incandescent 740-lumen lamp tilted 45º.
5" 3 1⁄ 8"
2 1⁄ 2" 3 1⁄8" Dia.
(24") 2
.2 2
.5
.02

(12") 1 1
20
5"
0
50
1 ⁄ 2"
1
(12") 1 10
1
⁄ 4" 5
21 15⁄16"
.5
(24") 2
1
14 5⁄8"
(36") 3 .01
.2
.05
.1
.02
(48") 4 0 1 2 3 4 5 6 7
(12") (24") (36") (48") (60") (72") (84")
3 1⁄16" Dia.
90°
75°
15°
Candle Power
60°
13 1⁄8"(±1⁄4)
30°
45°
45°
0° 15° 30°
Zonal lumen summary
0-30 65 8.7 47.2
0-40 105 14.2 77.0
0-60 134 18.1 97.7
0-90 137 18.5 100.0 Deg Candela Lumens
90-180 0 0.0 0.0 0 19 —
0-180 137 18.5 100.0 5 81 8
15 82 23
25 73 34
35 67 41
45 33 25
55 4 3
75 0 0
85 0 0
90 0 —

Outdoor lighting

− − Values based on 1 (12") foot mounting height from light
3 1⁄ 8"
opening of luminaire to ground stair and a 10-watt G121⁄2
80-lumen lamp pn lens 1-ft. above ground or stair.
(24") 2
.02

(12") 1
.5
3 3⁄ 8" 2
0
5
(12") 1 1 .2
10
.1 5 .001
.02
(24") 2 .01
1
37° .005
3 1⁄ 4" (36") 3
.002
.001
(48”) 4
0 1 2 3 4 5 6 7
1 3⁄ 8"
(12”) (24”) (36”) (48”) (60”) (72”) (84”)
3 3⁄ 8"
90°
75°
1 9⁄16" Legend
15°
Candle Power
0–Deg:
0° 60° 90–Deg:
180–Deg:
30°
45°
45°
0° 15° 30°
Zonal lumen summary

0-40 6 7.7 66.3 0.0 45.0 90.0 135.0 180.0 Flux
0-60 9 11.0 94.3 0 5 5 5 5 5 —
0-90 9 11.6 100.0 5 6 6 6 5 3 0
90-180 0 0.0 0.0 15 6 6 6 2 0 1
0-180 9 11.6 100.0 25 7 7 6 1 0 2
Note: Total luminaire efficiency=11.6%. 35 7 7 6 1 0 3
45 6 5 3 1 0 2
Vertical degrees
55 0 1 1 1 0 1
65 0 0 0 0 0 0
75 0 0 0 0 0 0
85 0 0 0 0 0 0
90 0 0 0 0 0 —

Outdoor lighting

− − Values based on 4 (48") foot mounting height from center
of light opening to base of deck and a 15-watt G161⁄2
100-lumen lamp.
(96") 2
.05

(48") 1
5 1⁄8" Dia.
0
.05
.05
.02
(48") 1
.02
4 3/8" .05
.05
(96") 2
.02
3 3/8" SQ.
.005
.002
(144") 3 .001
.0005 .0
.0002
(192”) 4 .0001
0 1 2 3 4
(48”) (96”) (144”) (192”)
5"
4 3/8"
5
/8"
90°
1 1/4"
75°
Legend
15°
Candle Power
0–Deg:
60° 90–Deg:
180–Deg:
30°
45°
45°
0° 15° 30°
Zonal lumen summary
0-40 1 1.3 12.8 0.0 45.0 90.0 135.0 180.0 Flux
0-60 5 5.5 52.7 0 1 1 1 1 1 —
0-90 10 10.4 100.0 5 2 1 1 1 1 0
90-180 0 0.0 0.0 15 1 1 1 1 1 0
0-180 10 10.4 100.0 25 1 1 1 1 1 0
35 1 1 1 1 1 0
45 1 1 1 1 1 1
Vertical degrees
55 5 3 3 4 6 4
65 6 5 5 5 7 5
75 0 0 0 0 0 0
85 0 0 0 0 0 0
90 0 0 0 0 0 —

Outdoor lighting

− − Values based on 8 (96") foot mounting height and a 100-watt
1321-lumen lamp tilted 45º
2 1/2"
5 7/16"
(24") 2 .05
.02

.2
3 1/2" Dia.
(12") 1
1
0
.2
3 / 8" Dia.
1
(12") 1 .5
.005
.1
(24") 2
.5
3 1/ 8"
.02
(36") 3
.01
.001
.0005 .002 .005
(48”) 4
0 1 2 3 4 5 6 7
(12”) (24”) (36”) (48”) (60”) (72”) (84”)
5 7/16"
/ 16"
9
90°
/ 4"
1
75°
2 15/16"
15°
Candle Power
60°
30°
45°
45°
0° 15° 30°
Zonal lumen summary

Percent of lamp output Deg Candela Lumens
Zone deg. Lumens based on 400 lumens Percent of total output 0 128 —
0-30 103 7.8 32.4 5 128 12
0-40 177 13.4 56.0 15 123 35
0-60 301 22.8 94.9 25 120 56
0-90 317 24.0 100.0 35 119 75
90-180 0 0.0 0.0 45 109 83
0-180 317 24.0 100.0 55 44 41
Note: Total luminaire efficiency=11.6%. 75 5 5
85 0 0
90 0 —

Vaportight lighting
Industrial vaportight lighting
Applications:
− − Low-maintenance indoor/outdoor lighting where moisture, Extra-long, high-temperature — 105° C (221° F) leads
dirt, dust, corrosion and rough service are problems Clean, contemporary design
− − Low-profile fixture design for where low ceiling height
presents a lighting problem
− − To light cold storage facilities, walkways, bridges, tunnels
Replaceable porcelain socket
and security locations
−− Used with colored globes as warning, caution or directional
lights; for 100- or 200-watt medium-base incandescent lamps
Features/Benefits:
− − Copper-free* aluminum and stainless steel screws provide Smooth conduit stops
increased corrosion resistance Heavy-duty die-cast guard
− − Precision-cast and machined surfaces permit safer wire
pulling Fully threaded globe
−− Fully threaded glass globes prevent cross threading,
ensuring a tight seal
− − High-quality replaceable porcelain socket with high-
temperature leads result in a long-lasting fixture
− − Five mounting configurations packaged three different ways
to suit all customer requirements
− − Colored, heat-resistant and shatterproof LEXAN® globes
available
Standard materials:
−− Fixture and guards: Die-cast aluminum alloy A360 with less than
.004% copper content (copper-free), and stainless steel screw
−− Globe: Lime crystal glass
−− Socket: Center contact, porcelain, medium base
Standard finish:
Compliances:
−− UL Listed
−− Suitable for use in wet locations only when oriented as
shown (mounted with lamp base up and guard/globe down)
VAG-C VKG-C
Sample specifications
−− Fixture shall be die-cast copper-free* aluminum alloy A360
All conduit stops shall be coined and free of rough edges.
LEXAN ® globes shall have full threads. Sockets shall be
porcelain. Fixtures shall be finished with powder-coated
paint. Fixtures shall be Red•Dot® Catalog No.__________
* Less than .004% copper content.
LEXAN® is a registered trademark of SABIC Innovative Plastics Company.
VWG-C VXG-C VXWG-C

Vaportight lighting
Indoor/outdoor lighting
Low-maintenance indoor/outdoor lighting where moisture, dirt, dust, corrosion

and rough service are a problem.
−− Compatible with incandescent and most self-ballasted compact fluorescent bulbs
− − For indoor or outdoor use
− − Fixture and guard die-cast copper-free aluminum, less than .004% copper content
−− Available in components or complete fixture
−− Low-silhouette incandescent vaportight
− − Variety of mounting configurations
− − UL Listed
Pendant Mount
Cat. No. Hub size (in.) Max. watt Description

VK-11 1
⁄2 100
Pendant Cap with Socket Screw
VK-21 3
⁄4 100
Terminals, Gasket and Screws
VK-12 1
⁄2 200
VK-22 3
⁄4 200
VKG-11 1
⁄2 100 Pendant Cap with Socket Screw
VKG-21 3
⁄4 100 Terminals, Gasket Screws and
VKG-12 1
⁄2 200 Globe
VKG-22 3
⁄4 200
VKG-11-C 1
⁄2 100
VKG-21-C 3
⁄4 100 Pendant Cap with Socket Screw
VK-11 VKG-11 VKG-11-C
Terminals, Gasket Screws, Globe
VKG-12-C 1
⁄2 200 and Cast Guard
VKG-22-C 3
⁄4 200
Ceiling mount with adapter plate

VA-01 — 100 Ceiling Outlet Box Cap with Socket
VA-02 — 200 with Leads, Gasket and Screws
VAG-01 — 100 Ceiling Outlet Box Cap with Socket
VAG-02 — 200 with Leads, Gasket, Screws and
Globe
VAG-01-C — 100 Ceiling Outlet Box Cap with Socket
VA-01 VAG-01 VAG-01-C with Leads, Gasket, Screws, Globe
VAG-02-C — 200
and Cast Guard
Ceiling mount cross feed (5 tapped holes)

VX-11 1
⁄2 100
VX-21 3
⁄4 100 Ceiling-Cross Feed Box with Gaskets,
Socket with Leads, Screws, 4 Closure
VX-12 1
⁄2 200 Plugs and Cast Mounting Lugs
VX-22 3
⁄4 200
VXG-11 1
⁄2 100 Ceiling-Cross Feed Box with Gaskets,
VXG-21 3
⁄4 100 Socket with Leads, Screws, 4 Closure
Plugs and Cast Mounting Lugs and
VXG-12 1
⁄2 200
Globe
VXG-11-C ⁄2
1
100 Ceiling-Cross Feed Box with Gaskets,
VXG-21-C ⁄4
3
100 Socket with Leads, Screws, 4 Closure
VX-11 VXG-11 VXG-11-C VXG-12-C 1⁄ 2 200 Plugs, Cast Mounting Lugs, Globe
VXG-22-C 3⁄4 200 and Cast Guard

Vaportight lighting
Wall mount with adapter plate Globes
VW-01 VWG-01 VWG-01-C VGL-01 VGLL-01

Cat. No. Max. watt Description Cat. No. Max. watt Description
VW-01 100 Wall mount unit with socket with leads, gaskets Glass
VW-02 200 and screws VGL-01 100 Clear
VWG-01 100 Wall mount unit with socket with leads, gaskets VGLA-01 100 Amber
VWG-02 200 and screws and globe VGLB-01 100 Blue
VWG-01-C 100 Wall mount unit with socket with leads, gaskets, VGLG-01 100 Green
VWG-02-C 200 globe, screws and cast guard VGLR-01 100 Red
VGLH-01 150 Clear, heat resistant
Wall mount cross feed (5 tapped holes) VGL-02 200 Clear
VGLR-02 200 Red
VGLH-02 300 Clear, heat resistant
Lexan®
VGLL-01 75 Clear prismatic
VGLL-02 150 Clear prismatic
VGLA-A1 75 Amber
VGLA-R1 75 Red
Not for use with guards. Note: For upright mounting only. Caution: In ordering LEXAN®
VXW-11 VXWG-11 VXWG-11-C Globe, wattage is rated 75% of standard globe size (i.e. VGLL-02 is for use on 200-
watt fixtures, but only rated for 150-watt lamps.)
VXW-11 1
⁄2 100 Wall mount cross feed with socket
VXW-21 3
⁄4 100
with leads, gaskets, screws, 4 closure
VXW-12 1
⁄2 200
plugs and cast mounting lugs
Guards
VXW-22 3
⁄4 200
VXWG-11 1
VXWG-21 3
⁄4 100
with leads, gaskets, screws, 4 closure
VXWG-12 1
⁄2 200
lugs and globe
VXWG-22 3
⁄4 200
VXWG-11-C 1
VXWG-21-C 3
⁄4 100 with leads, gaskets, screws, 4
VXWG-12-C 1
⁄2 200 closure plugs, cast mounting lugs,
VXWG-22-C 3
⁄4 200 globe and cast guard
Vaportight boxes and covers

LGW-01 VGD-01
Cat. No. Max. watt Description
Wire
VGW-01 100
Clamp on plated steel guards
VGW-02 200
Die cast
VGD-01 100 Die-cast aluminum guards with positive locking
VGD-02 200 screws
LVX-1 V-B
Cat. No. Max. watt Description
Boxes
LVX-1 1
⁄2 Box, 31⁄ 2" diameter, 15⁄ 8" deep, 5 tapped holes,
LVX-2 3
⁄4 12.08 Cu. In. 4 closure plugs with cast mounting lugs
Cover
V-B None Blank cover 31⁄ 2" diameter

Vaportight lighting
VKG VXG E
Cat. No. A (in.) B (in.) C (in.) D (in.) Cat. No. A (in.) B (in.) E (in.) F (in.)
F
VKG-11 3 3⁄8 8 3⁄16 — — VXG-11 33⁄8 813⁄16 31⁄2 1 5⁄8
VKG-21 3 ⁄8
3
8 ⁄16
3
— — VXG-21 3 ⁄83
8 ⁄16
13
3 ⁄2
1
1 ⁄85
B D
VKG-12 4 3⁄8 101⁄8 — — VXG-12 43⁄8 103⁄4 31⁄2 1 5⁄8
VKG-22 4 ⁄8
3
10 ⁄8 1
— — VXG-22 4 ⁄83
10 ⁄43
3 ⁄2
1
1 5⁄8
B D
VKG-11-C — — 4 ⁄16
1
8 ⁄4
3 Cat. No. C (in.) D (in.)
VKG-21-C — — 4 1⁄16 8 3⁄4 VXG-11-C 4 ⁄16
1
9 ⁄16
5
VKG-12-C — — 5 1⁄4 105⁄8 VXG-21-C 41⁄16 95⁄16

A
VKG-22-C 5 ⁄41
10 ⁄8 5
C VXG-12-C 5 ⁄41
113⁄16
Pendant Mount (VKG) VXG-22-C 5 ⁄41
113⁄16 A
C
Ceiling Mount Cross
Feed (VXG)
VAG VWG E
Cat. No. A (in.) B (in.) C (in.) D (in.) Cat. No. A (in.) B (in.) E (in.) F (in.)
VAG-01 3 3⁄8 7 7⁄16 — — VWG-01 3 3⁄8 87⁄16 33⁄4 3 1⁄2 F
VAG-02 4 ⁄8
3
9 ⁄8
3
— — VWG-02 4 ⁄83
10 ⁄83
5 ⁄4
3
3 1⁄2
B D Cat. No. C (in.) D (in.)
VAG-01-C — — 4 1⁄16 7 15⁄16
VAG-02-C — — 5 ⁄41
9 ⁄16
13 VWG-01-C 4 1⁄16 815⁄16
VWG-02-C 5 1⁄4 10 13⁄16 D
B
A
C
Ceiling Mount (VAG)
A
C
Wall Mount (VWG)
VXWG E
Dimensions (in.)
Cat. No. A B C D E F G H I J CI
F
VXWG-11 3 3⁄ 8 87⁄16 — — 1 5⁄ 8 3 1⁄ 2 — — — — —
VXWG-21 3 3⁄ 8 87⁄16 — — 1 5⁄ 8 3 1⁄ 2 — — — — —
VXWG-12 4 3⁄ 8 103⁄8 — — 1 5⁄ 8 3 1⁄ 2 — — — — —
VXWG-22 4 3⁄ 8 103⁄8 — — 1 5⁄ 8 3 1⁄ 2 — — — — —
VXWG-11-C 3 3⁄ 8 87⁄16 4 1⁄16 8 15⁄16 1 5⁄ 8 3 1⁄ 2 — — — — — B D
VXWG-21-C 3 3⁄ 8 87⁄16 4 1⁄16 815⁄16 1 5⁄ 8 3 1⁄ 2 — — — — — G
VXWG-12-C 4 3⁄ 8 103⁄8 5 3⁄16 1013⁄16 1 5⁄ 8 3 1⁄ 2 — — — — —
VXWG-22-C 4 3⁄ 8 103⁄8 5 3⁄16 1013⁄16 1 5⁄ 8 3 1⁄ 2 — — — — —
LVX-1 — — — — 1 5⁄ 8 3 1⁄ 2 5
⁄8 5 47⁄16 2 13⁄16 10.3
LVX-2 — — — — 1 5⁄ 8 3 1⁄ 2 5
⁄8 5 4 7⁄16 2 13⁄16 10.3 A
C
Wall Mount Cross Feed (VXWG)

Vaportight lighting
Pendant fixtures
Packaging
Cat. No. Description Max. watts Box Std. ctn.
PVP-100C* Fixture and Clear LEXAN® Globe 100 1 12
PVPG-100B Fixture, Blue LEXAN® Globe, Guard 100 1 12
PVPG-100R Fixture, Red LEXAN® Globe, Guard 100 1 12
UL Listed. CSA Certified LR-95792.
* Guard not included.
VGL VGD, VGW
A
Threaded Glass Globe Threaded Plastic Globe
(VGL) Guards (VGD, VGW)
(VGLL)
Cat. No. A (in.) B (in.) C (in.) D (in.) E (in.) I.D. (in.) Cat. No. A (in.) B (in.)
VGL-01 series 3 3⁄ 8 6 17⁄32 35⁄16 1 — 211⁄16 VGD-01 41⁄16 7
VGL-02 series 4 3⁄ 8 8 3⁄ 8 45⁄16 1 — 313⁄16 VGD-02 55⁄16 85⁄8
VGLL-01 317⁄ 32 5 15⁄16 3 3⁄ 8 — 7
⁄8 27⁄8 VGW-01 41⁄16 641⁄64
VGLL-02 417⁄ 32 8 1⁄ 4 4 3⁄ 8 — 7
⁄8 37⁄8 VGW-02 55⁄16 837⁄64
VGLA-A1 317⁄ 32 5 15⁄16 3 3⁄ 8 — 7
⁄8 27⁄8
VGLA-R1 317⁄ 32 5 15⁄16 3 3⁄ 8 — 7
⁄8 27⁄8

Vaportight lighting
Surface fixtures Vaporproof fixture globes and guards replacements
3 5⁄16"
Dia.
4TPI
8" 9 1⁄ 2"
6 1⁄4"
3 7⁄ 8 "
4 1⁄ 2" 3 7⁄ 8 "
PBVC-100C Dia.
PVG-1A VG-3 &VG-4
Packaging
Std.
Packaging
Cat. No. Description Box Ctn.
Cat. No. Description Max. watts Box Std.
ctn. PVG1-A* Amber LEXAN® Globe for 100-Watt Fixtures 1 12
Fits all 3" and 4" round or octagon boxes PVG-1C* Clear LEXAN ® Globe for 100-Watt Fixtures 1 12
PBVC-100C* Fixture, Box and Clear LEXAN® Globe 100 1 12 PVG-1R* Red LEXAN ® Globe for 100-Watt Fixtures 1 12
UL Listed E-77360. CSA Certified LR-95792. LEXAN® is a registered trademark of SABIC PVG-1W* White LEXAN ® Globe for 100-Watt Fixtures 1 12
Innovative Plastics Company. *Guard sold separately. VG-3 Guard for 100-Watt Fixtures 1 12
VG-4 Guard for 200-Watt Fixtures 1 6
* UL Listed E-77360.

Swimming pool and spa products
Swimming pool junction boxes
Used for making wiring connections to underwater pool

lighting, line or low-voltage
− − Black LEXAN® cover, die-cast solid brass base 4 15⁄16"
− − Supplied with brass closure plugs, four ground screws,
sealing gasket and mounting hardware
− − 3 1⁄16" x 43⁄16" x 31⁄4" deep
− − Listed in accordance to NEC® Section 680.24 3 1⁄16" 3 1⁄ 4"
Grounding posts for

flexible cord ground wire Grounding post for
Strain-relief attaching grounding
clamp conductor from feed
(adjustable for wire
use on hub “a”
or “b”) A B C Use hub “c” for entry of
feed wiring
Use hub “a” or Compression grounding
“b” for entry of post for bonding wire (if
flexible cord from Inside view required)
pool light
SPJ-3
SB11PL
SB14
SPJ-5 SB100
SPJ Series SB Series

Cat. No. No. of plugs Hub size Std. Ctn. Description
conduit hub size (in.) Packaging
SPJ-3 3 (2)1⁄2 " and (1) 1" 24
Cat. No. Cubic in. No. of plugs A B C Box Std. Ctn.
SPJ-5 5 (1) ⁄2 ", (2) ⁄4 " and (2) 1”
1 3 24
SPJ-MB — Mounting brackets 24
SB11PL 22.0 1 1
⁄2 1
⁄2 1
⁄2 1 10
SPJ-SR — Rod 24
SB14 22.0 1 3
⁄4 3
⁄4 3
⁄4 1 10
SB100 22.0 1 3
⁄4 1 3
⁄4 1 10
UL Listed E-63648.
Weatherproof.
LEXAN® is a registered trademark of SABIC Innovative Plastics Company.
NEC and National Electrical Code are registered trademarks of the National Fire
Protection Association, Inc.

Stainless Steel While-In-Use Box
and Cover System
Meets the new NEC® and UL® requirements for “extra-duty” outlet
box covers while being rated for liquid ingress protection and
corrosion resistance in environments that require daily washdown.
NSF certified design.
Use of caustic chemicals during washdown and sanitation, pathogen concerns, 24/7 manufacturing environments and increasingly
stringent USDA, FDA and HACCP requirements mean one thing—the Food and Beverage Industry has unique electrical power equipment
needs that separate them from other industrial plants. Protecting electrical devices in these harsh and demanding environments
can be a challenge. National Electrical Code® (NEC®) requirements mandate protection of electrical devices in wet locations even
when a cord is plugged into a receptacle. The durability of these products, particularly in high traffic areas, plays a major role with
respect to the new NEC ® changes calling for more robust designs for outlet covers protecting wiring devices in wet locations.
The Red Dot ® Stainless Steel While-In-Use Box and Cover System makes it easier than ever to comply with NEC® requirements for
installing receptacles in harsh environments that require washdown maintenance. While-In-Use Covers provide wet location protection
for plugs that remain installed for an extended period of time. The Red Dot® Stainless Steel While-In-Use Box and Cover System complies
with the new NEC ® and UL® requirements for “extra-duty” outlet box covers while being rated for harsh washdown applications.
Features and Benefits

−− NEMA 4X rated (while not in use) when installed properly
− − NEMA 3R rated
− − NSF certified
−− cULus Listed
−− 316 Stainless Steel construction
− − Corrosion resistant
− − Smooth, sloped surfaces to allow maximum runoff
− − Configurable—a variety of sizes and type of outlets up to a
30 amp receptacle can be used
− − Electrical cord splash guard
− − Allows ½" to 1" conduit fittings
− − Quick access quarter turn latch
−− Integral padlock hasp
− − 37.3 cubic inch capacity integral conduit body
− − Stand-off mounting provides separation from the wall,
allowing superior washdown accessibility
− − Lift-off, bullet-style hinges allow for easy access and cleaning
−− Integral conduit body, electrical box, and while-in-use cover
all in one
− − Continuous, 1-piece, replaceable UL Listed silicone gasket
Red Dot® Stainless Steel While-In-Use Box and Cover System
Catalog number Description Standard carton
SSE Stainless Steel While-In-Use Box and Cover System 1
Markets and End Users

− − Food and beverage plants −− Petrochemical operations
− − Chemical plants − − Marine and coastal facilities
− − Water and wastewater treatment −− Pulp and paper mills
− − Pharmaceutical and cosmetics plants

Notes

Notes

Catalog number index
Catalog Number Page Number Catalog Number Page Number Catalog Number Page Number Catalog Number Page Number
2CCB 11 B330BRE-R 30 DCCG-WH 10 E9G2DDN-CAR 15
2CCB-FS 11 B37D20G 20 DCCGV 10 E9G2DSN-CAR 15
2CCD 11 B440BRE-R 30 DCCGV-BR 10 E9G2GTN-CAR 15
2CCD-L 11 BL-100 49 DCCGV-WH 10 E9G2SSN 15
2CCDG 11 CCB 11 DCCU 9 G1 26
2CCG 11 CCB-FS 11 DCCU-BR 9 IH-1 21
2CCS 11 CCD 10 DCCU-L 9 IH-2 21
2CCS-L 11 CCD-FS 10 DCCU-WH 9 IH-LM-1 21
2CCSD 11 CCD-L 10 DIH3-1-LM 19 IH-LM-2 21
2CCSG 11 CCDV 10 DIH3-1-LM-BR 19 IH-S-1 21
2CCSG-L 11 CCDV-L 10 DIH3-1-LM-WH 19 IH-S-2 21
2CCT 11 CCG 10 DIH3-2-LM 19 IH3-1 19
2CCT-1 11 CCG-FS 10 DIH4-1-LM 19 IH3-1-LM 19
2CCTD 11 CCG-L 10 DIH4-1-LM-BR 19 IH3-2 19
2CCTD-1 11 CCGV 10 DIH4-1-LM-WH 19 IH3-2-LM 19
2CCTG 11 CCGV-L 10 DIH4-2-LM 19 IH4-1 19
2CCU 9 CCK 10 DIH5-1-LM 19 IH4-1-LM 19
2CCU-BR 9 CCMB 10 DIH5-2-LM 19 IH4-2 19
2CCU-WH 9 CCPO 10 DKG 13 IH4-2-LM 19
2CKPL 16 CCPO-L 10 DKG-PRO 13 IH5-1 19
2CKPM 16 CCRB 23 DN415 15 IH5-1-LM 19
2CKPM-BR 16 CCRSB 23 DPLG-1 20 IH5-2 19
2CKPM-G 16 CCS 10 DPLG-1-BR 20 IH5-2-LM 19
2CKPM-W 16 CCS-L 10 DPLG-1-WH 20 IH6S2-1 19
2IH3 21 CCSK 10 DPLG-2 20 IH6S2-2 19
2IH3-1 19 CCSV 10 DS-47 22 IHD-1 21
2IH3-2 19 CCSV-L 10 DS-47-BR 22 IHD-2 21
2IH4 21 CCSV-TL 10 DS-47-WH 22 IHD-3 21
2IH4-1 19 CCT 10 DS-47B 22 IHD3-1 20
2IH4-2 19 CCT-1 10 DS-48 22 IHD3-2 20
2IH5 21 CCT-1-20 10 DS-48-BR 22 IHD3-3 20
2IH5-1 19 CCT-3 10 DS-48-WH 22 IHD4-1 20
2IH5-2 19 CCU 9 DS-48B 22 IHD4-2 20
2IH5S2 21 CKPL 16 E365D-CAR 24 IHE 20
2IH5S2-1 19 CKPM 16 E365DW-CAR 24 IHE4-1 20
2IH5S2-2 19 CKPM-BR 16 E381D-CAR 24 IHEF2-1 20
2IH7 21 CKPM-G 16 E381DW-CAR 24 IHEF2-2 20
2IH7-1 19 CKPM-W 16 E382DE 24 IHEF6S2-1 20
2IH7-2 19 CKPS 16 E382DEW 24 IHEF6S2-2 20
2IH7S2 21 CKPS-BR 16 E960GLB 24 K780BR 28
2IH7S2-1 19 CKPS-G 16 E960PGL 24 K805BR-8 35
2IH7S2-2 19 CKPS-W 16 E962E 24 K812BR 33
2IHD5 21 CS841BR 34 E9802CN-CAR 15 K822BR 33
2IHD5-1 20 D2IH3-1 19 E980CM-CAR 14 K831BR 34
2IHD5-2 20 DCCD 10 E980CN-CAR 14 K851BR 34
2IHD5-3 20 DCCD-BR 10 E98DHGN-CAR 15 K852BR 34
2IHE 20 DCCD-WH 10 E98G20N-CAR 14 K861BR 35
3CCB 11 DCCDSO 10 E98G30N-CAR 14 L-800 28
3IHD7 21 DCCDSO-BR 10 E98G5FN-CAR 14 LC-21 27
3IHD7-3 20 DCCDSO-WH 10 E98GDRN-CAR 14 LG-80 28
AD11-2 26 DCCDV 10 E98GFCN-CAR 14 LM 20
B13030G 19 DCCDV-BR 10 E98GHGN-CAR 15 LVX-1 47, 48
B1501SGR 19 DCCDV-WH 10 E98SRCN-CAR 14 LVX-2 47, 48
B1502SG 19 DCCG 10 E98SSCN-CAR 14 PBVC-100C 50
B25D30G 19 DCCG-BR 10 E98TSCN-CAR 14 PLG-1-RD 20
IDX-1 Red•Dot Weatherproof Boxes & Covers | Catalog

Catalog Number Page Number Catalog Number Page Number Catalog Number Page Number
PLG-2-RD 20 SW20-2 10 VXG-22 48
PLG-3-RD 20 V-B 47 VXG-22-C 46, 48
PVG-1A 50 VA-01 46 VXW-11 47
PVG-1C 50 VA-02 46 VXW-12 47
PVG-1R 50 VAG-01 46, 48 VXW-21 47
PVG-1W 50 VAG-01-C 46, 48 VXW-22 47
PVP-100C 49 VAG-02 46, 48 VXWG-11 47, 48
PVPG-100B 49 VAG-02-C 46, 48 VXWG-11-C 47, 48
PVPG-100R 49 VG-3 50 VXWG-12 47, 48
R104 11 VG-4 50 VXWG-12-C 47, 48
R122 49 VGD-01 47, 49 VXWG-21 47, 48
S-1 23 VGD-02 47, 49 VXWG-21-C 47, 48
S-12 23, 27, 29 VGL-01 47, 49 VXWG-22 47, 48
S-3 23 VGL-02 47, 49 VXWG-22-C 47, 48
S-47 22, 23, 29 VGL-075 30 WH90 26
S-48 22, 23, 29 VGLA-01 47 WHY2 26
S-71 23 VGLA-A1 47, 49 WR281-C-WH 11
S130E 22, 23, 29 VGLA-R1 47, 49 WR281-CBR 11
S201E 23, 27 VGLB-01 47 WR81-CN 10
S203BRE 27 VGLG-01 47 WRH80-C 10
S203E-R 27 VGLH-01 47 VXW-11 48
S203WHE 27 VGLH-02 47 VXW-12 48
S211BRE 23, 27 VGLL-01 47, 49 VXW-21 48
S211E 23, 27, 29 VGLL-02 47, 49 VXW-22 48
S211WHE 23, 27 VGLR-01 47 VXWG-11 48, 49
S213BRE-9R 23, 27 VGLR-02 47 VXWG-11-C 48, 49
S213E-15R 23, 27, 29 VGW-01 47, 49 VXWG-12 48, 49
S213WHE-9R 23, 27 VGW-02 47, 49 VXWG-12-C 48, 49
S340E-20R 11 VK-11 46 VXWG-21 48, 49
S47CFB 22 VK-12 46 VXWG-21-C 48, 49
S48CFB 22 VK-21 46 VXWG-22 48, 49
S500BRE-RL 28 VKG-11 46, 48 VXWG-22-C 48, 49
S500E-RL 28 VKG-11-C 46, 48 WH90 28
S500EG 26, 28 VKG-12 46, 48 WHY2 28
S500WHE-RL 28 VKG-12-C 46, 48 WR281-C-WH 11
S513E-RL 28 VKG-21 46, 48 WR281-CBR 11
S621E 27 VKG-21-C 46, 48 WR81-CN 10
SB100 51 VKG-22 46, 48 WRH80-C 10
SB11PL 51 VKG-22-C 46, 48
SB14 51 VW-01 47
SE-47 20 VW-02 47
SE-48 20, 22, 23, 29 VWG-01 47, 48
SJ-11 23, 27, 29 VWG-01-C 47, 48
SJ-21 23, 27, 29 VWG-02 47, 48
SJ-31 23, 27, 29 VWG-02-C 47, 48
SJ-B 29 VX-11 46
SPJ-3 51 VX-12 46
SPJ-5 51 VX-21 46
SPJ-MB 51 VX-22 46
SPJ-SR 51 VXG-11 46, 48
SS-B 23, 29 VXG-11-C 46, 48
SSE 51 VXG-12 46, 48
SW1 10 VXG-12-C 46, 48
SW2 10 VXG-21 46, 48
SW20-1/710 10 VXG-21-C 46, 48
Catalog | Red•Dot Weatherproof Boxes & Covers IDX-2

Visit our world of
electrical product solutions
Visit the “Electrical World” section of our web site at
www.tnb.com for more information on Thomas & Betts solutions including
our newest products, plus user-friendly catalog and competitive part
number search, application and technical support and other useful
information. Click on the Electrical World icon or go to:
tnbelectricalworld.tnb.com.
Industry codes and specifications

All Thomas & Betts products meet or exceed applicable industry
specifications or codes which are detailed in the appropriate T&B product
literature.
Online CAD library

Thomas & Betts offers free download of two- and three-dimensional CAD
models of many of its products in more than 90 native CAD formats at:
www.tnb.com/cadlibrary
Thomas & Betts

Please ask your Thomas & Betts sales representative for a complete catalog of quality Electrification Products
Thomas & Betts electrical products or visit us at www.tnb.com. For customer service, Division of ABB
call 1-800-816-7809. For technical questions, call 1-888-862-3289. 8155 T&B Boulevard
Memphis, TN 38125
© 2016 Thomas & Betts Corporation. All rights reserved. Printed in the U.S.A. 901-252-5000
10/16 CAT12 www.tnb.com

Abb Weather Proof

Uploaded by

Copyright:

Available Formats

Abb Weather Proof

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Abb Weather Proof

Uploaded by

Copyright:

Available Formats

Weatherproof

Boxes & Covers

Catalog | Red•Dot Weatherproof Boxes & Covers 1

Weatherproof boxes, covers and lighting products

2 Red•Dot Weatherproof Boxes & Covers | Catalog

Code Keeper® weatherproof covers

Code Keeper ® covers are corrosion-resistant, aluminum wet-

Catalog | Red•Dot Weatherproof Boxes & Covers 3

CKSUV CKMU CKMUV CKLSVU 2CKU

Single-gang Single-gang Single-gang Single-gang Two-gang

4 Red•Dot Weatherproof Boxes & Covers | Catalog

“Extra-Duty” per NEC® Section 406.9(B)(1)

Duplex GFCI Single Switch

CKMU—Medium horizontal cover, 31⁄4" internal depth

3 1⁄ 2" Use for any of these configurations:

Duplex GFCI Single Switch

CKMUV—Medium vertical cover, 31⁄4" internal depth

3 1⁄ 2" Use for any of these configurations:

Duplex GFCI Single Switch

CKLSVU—Large vertical cover, 43⁄4" internal depth

NEC and National Electrical Code are

Catalog | Red•Dot Weatherproof Boxes & Covers 5

“Extra-Duty” per NEC® Section 406.9(B)(1)

4 1⁄ 2" Use for any of these configurations:

Two-duplex Single up to 13⁄ 8" and Two-GFCI receptacle

Toggle and GFCI Duplex and GFCI Toggle and duplex

Two-single up to 13⁄ 8" Toggle and single up Single up to 13⁄8" and

Two-toggle switch cover

6 Red•Dot Weatherproof Boxes & Covers | Catalog

Universal design installs in both horizontal and vertical applications.

Accommodates multiple outlet configurations (receptacles not included)

GFCI Duplex Single receptacle Switch Includes two adapter plates,

Cat. No. Description

Catalog | Red•Dot Weatherproof Boxes & Covers 7

Single-gang device covers

8 Red•Dot Weatherproof Boxes & Covers | Catalog

Two-gang device covers Blank covers

Cat. No. Color Description

2CCT-1 Cover with two single-pole 15a, 125v

Catalog | Red•Dot Weatherproof Boxes & Covers 9

2 13⁄16" 2 13⁄16" 4 9⁄16" 1 7⁄8"

Two- and three-gang covers

4 5⁄8" 1 13⁄16" 5 5⁄8" 4 5⁄8"

3 3⁄4" 4 5⁄8" 4 5⁄8" 3 3⁄4"

2CCD & 2CCG 2CCT 2CCTG-FS Typical FS mount

10 Red•Dot Weatherproof Boxes & Covers | Catalog

Durable, textured, shrouded cover.

in use, the receptacle remains concealed beneath

Features & benefits:

Red Dot® Deck Grommet PRO

Catalog | Red•Dot Weatherproof Boxes & Covers 11

30-Amp receptacle Single switch

Duplex receptacle Toggle switch

15-Amp receptacle 50-Amp receptacle

12 Red•Dot Weatherproof Boxes & Covers | Catalog

Two-gang blank Combination toggle/GFI

Double duplex Combination toggle/duplex receptacle

Double toggle Door operated light switch

Catalog | Red•Dot Weatherproof Boxes & Covers 13