Updated: 22.6.

2022

PRODUCT DATASHEET

PAROC Hvac Mat AluCoat

Stone wool mat with reinforced aluminium foil facing.
Thermal insulation.

The surface temperature of the facing must not exceed +80°C (temperature restriction
determined in accordance with the heat resistance of adhesive).
PAROC stone wool products are capable of withstanding high temperatures. The
binder starts to evaporate when its temperature exceeds approximately 200°C. The
insulating properties remain unchanged, but the compressive stress weakens. The
softening temperature of stone wool products is over 1000°C.
Certification Number 0809-CPR-1016 Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo.
Finland
Designation Code MW-EN 14303-T2-ST(+/100)250-WS1-MV2
Package Type Plastic Packs on Pallet

DIMENSIONS
WIDTH X LENGTH THICKNESS
500/1000 x 8000 30 mm
500/1000 x 7000 40 mm
500/1000 x 7000 50 mm
500/1000 x 7000 60 mm
500/1000 x 5000 70 mm
500/1000 x 5000 80 mm
500/1000 x 4000 90 mm
500/1000 x 4000 100 mm
According to EN 822 According to EN 823

PROPERTY VALUE ACCORDING TO

DIMENSIONAL STABILITY
Maximum Service Temperature - Dimensional Stability (+/100)250 °C EN 14303:2009+A1:2013 (EN 14706)

© Paroc Group 2022 PAROC Hvac Mat AluCoat 1(2)

Updated: 22.6.2022

Properties
PROPERTY VALUE ACCORDING TO
FIRE PROPERTIES
Reaction to Fire, Euroclass A1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion NPD EN 14303:2009+A1:2013
THERMAL PROPERTIES
Thermal Conductivity in 0 °C, λ0 0,034 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 10 °C, λ10 0,036 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ50 0,046 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ100 0,060 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ150 0,075 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ200 0,093 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ250 0,115 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and Tolerances T2 EN 14303:2009+A1:2013 (EN 823)
MOISTURE PROPERTIES
Water Absorption, Short Term WS, (Wp) ≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Diffusion Resistance MV2 EN 14303:2009+A1:2013 (EN 12086)
Chloride Ions, Cl- NPD EN 14303:2009+A1:2013 (EN 13468)
SOUND PROPERTIES
Sound Absorption NPD EN 14303:2009+A1:2013 (EN ISO 354)
MECHANICAL PROPERTIES
Compressive stress at 10 % deformation CS(10), σ10 NPD EN 14303:2009+A1:2013 (EN 826)
EMISSIONS
Release of Dangerous Substances NPD EN 14303:2009+A1:2013
DURABILITY OF FIRE AND THERMAL PROPERTIES
Durability of Reaction to Fire Against Ageing/Degradation No change in reaction to fire properties for mineral wool products. The fire performance of mineral
wool does not deteriorate with time. The Euroclass classification of the product is related to the
organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass
classification of the product is related to the organic content, which remains constant or decreases
with high temperature.
Durability of Thermal Resistance Against Thermal conductivity of mineral wool products does not change with time, experience has shown the
Ageing/Degradation fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Appearance
Facing Material Reinforced aluminium foil

Head Office: PAROC GROUP, P.O. Box 240 (Energiakuja 3), FI-00181 Helsinki, Finland, Tel. +358 46 876 8000, Fax +358 46 876 8002, www.paroc.com
The information in this brochure describes the conditions and technical properties of the disclosed products, valid at the time of publication of this document and until replaced by the next
printed or digital version. The latest version of this brochure is always available on the Paroc website. Our information material presents applications for which the functions and technical
properties of our products have been approved. However, the information does not mean a commercial guarantee. We do not assume liability of the use of third party components used in
the application or the installation of our products. We cannot warrant the suitability of our products if used in an area or conditions which are not provided in our information material. As a
result of constant further development of our products we reserve the right to make alterations to our information material at any time. PAROC is a registered trademark of Paroc Group. This
data sheet is valid in following countries: United Kingdom.

© Paroc Group 2022 PAROC Hvac Mat AluCoat 2(2)