Nothing Special   »   [go: up one dir, main page]

CompactDryNissuiXSA IllustrationManual

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

CompactDry “Nissui” X-SA

Illustration Manual

Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved.


Weigh 50g solid sample

and add 450mL Buffered Sodium Chloride


Peptone Solution to the sample.
It is recommended to use a stomacher bag
with filter to eliminate risks of carry over of
tiny pieces of foodstuffs into the surface of
the medium.

Homogenize this mixed sample by a


blender
Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved. 2
Open aluminum bag, and take out a set of 4 plates.

Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved. 3


Take off the cap of the plate

Write the appropriate information on


the memorandum section.

Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved. 4


Pipette 1ml of homogenized specimen
(to be further diluted if necessary) in
the middle of dry sheet of Compact
Dry X-SA.

Specimen diffuses automatically and


evenly into all over the sheet (total
medium of 20 cm2) to transform it
into gel within seconds.
Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved. 5
Viable count in swab
test sample

Inoculate 1 ml of
wiping solution (to be
diluted if necessary),
which is obtained from
cotton swab,
Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved. 6
Turn over the plate capped

put in an incubator.
Incubate for 24 + 2 hours at 37+ 1 ℃.

Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved. 7


Staphylococcus aureus forms light blue/blue
colonies of 1~2 mm in diameter.

Detection limit of Compact Dry X-SA is


between 1 – 300 cfu/plate.

From backside of the plate, count the number of


colored colonies appeared in the medium.
White paper placed under the plate can help to
count colonies easier.
Copyright © Nissui Pharmaceutical Co., Ltd. All rights reserved. 8

You might also like