17.8.2 Packet Tracer - Skills Integration Challenge
17.8.2 Packet Tracer - Skills Integration Challenge
17.8.2 Packet Tracer - Skills Integration Challenge
Addressing Table
2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 6 www.netacad.com
17.8.2 Packet Tracer – Skills Integration Challenge
Background / Scenario
The router Central, ISP cluster, and the Web server are completely configured. You must create a new IPv4
addressing scheme that will accommodate 4 subnets using the 192.168.0.0/24 network. The IT department
requires 25 hosts. The Sales department needs 50 hosts. The subnet for the rest of the staff requires 100
hosts. A Guest subnet will be added in the future to accommodate 25 hosts. You must also finish the basic
security settings and interface configurations on R1. Then, you will configure the SVI interface and basic
security settings on switches S1, S2, and S3.
Instructions
IPv4 Addressing
Use 192.168.0.0/24 to create subnets that meet the host requirements.
o Staff: 100 hosts
o Sales: 50 hosts
o IT: 25 hosts
o Guest network to be added later: 25 hosts
Document the IPv4 addresses that have been assigned in the Addressing Table.
Record the subnet for the Guest network:
Type your answers here.
192.168.0.224/27
PC Configurations
Configure the assigned IPv4 address, subnet mask, and default gateway settings on the Staff, Sales, and
IT PCs using your addressing scheme.
Assign the IPv6 unicast and link local addresses and default gateways to the Staff, Sales, and IT
networks according to the Addressing Table.
R1 Configurations
Configure the device name according to the Addressing Table.
Disable DNS lookup.
Assign Ciscoenpa55 as the encrypted privileged EXEC mode password.
Assign Ciscoconpa55 as the console password and enable login.
Require that a minimum of 10 characters be used for all passwords.
Encrypt all plaintext passwords.
Create a banner that warns anyone accessing the device that unauthorized access is prohibited.
2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 6 www.netacad.com
17.8.2 Packet Tracer – Skills Integration Challenge
Running Scripts
R1 Configuration
enable
config t
service password-encryption
security passwords min-length 10
hostname R1
login block-for 180 attempts 4 within 120
enable secret 5 $1$mERr$Amm/da5NtiazLuZDbgqZ60
ipv6 unicast-routing
username Admin1 secret 5 $1$mERr$Ty/EkWXcSXEwIckISrps8/
no ip domain-lookup
ip domain-name CCNA-lab.com
interface GigabitEthernet0/0
2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 6 www.netacad.com
17.8.2 Packet Tracer – Skills Integration Challenge
S1 Configuration
enable
conf t
service password-encryption
hostname S1
enable secret 5 $1$mERr$Amm/da5NtiazLuZDbgqZ60
no ip domain-lookup
interface Vlan1
ip address 192.168.0.2 255.255.255.128
no shutdown
ip default-gateway 192.168.0.1
2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 4 of 6 www.netacad.com
17.8.2 Packet Tracer – Skills Integration Challenge
line con 0
password 7 0802455D0A1606181C1B0D517F
login
exec-timeout 5 0
line vty 0 4
exec-timeout 5 0
login
line vty 5 15
exec-timeout 5 0
login
end
S2 Configuration
enable
conf t
service password-encryption
hostname S2
enable secret 5 $1$mERr$Amm/da5NtiazLuZDbgqZ60
no ip domain-lookup
interface Vlan1
ip address 192.168.0.130 255.255.255.192
no shutdown
ip default-gateway 192.168.0.129
line con 0
password 7 0802455D0A1606181C1B0D517F
login
exec-timeout 5 0
line vty 0 4
exec-timeout 5 0
login
line vty 5 15
exec-timeout 5 0
login
end
S3 Configuration
enable
conf t
service password-encryption
hostname S3
enable secret 5 $1$mERr$Amm/da5NtiazLuZDbgqZ60
no ip domain-lookup
interface Vlan1
ip address 192.168.0.194 255.255.255.224
no shut
ip default-gateway 192.168.0.193
line con 0
password 7 0802455D0A1606181C1B0D517F
login
2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 5 of 6 www.netacad.com
17.8.2 Packet Tracer – Skills Integration Challenge
exec-timeout 5 0
line vty 0 4
exec-timeout 5 0
login
line vty 5 15
exec-timeout 5 0
login
end
2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 6 of 6 www.netacad.com