Catalog HY15-3501/US Pilot Operated Relief Valve

Technical Information Series RAH101

CV
General Description
Valves

Pilot Operated Spool-Type Relief Valve. For addition

Check

information see Technical Tips on pages PC1-PC6.

SH

Features
Shuttle
Valves

• Hardened, precision ground parts for durability

LM • Low profile adapter for minimal space requirements
Load/Motor

• Fully guided poppet for more consistent reseat

Controls

• Steel adapters are coated with yellow zinc dichromate for

protection from salt spray
FC • Polyurethane “D”-Ring eliminates backup rings and
prevents hydrolysis
Controls

(1) (2) (2)

• Internal screening protects pilot spring from debris
Flow

PC (1)
Pressure
Controls

Specifications
LE Rated Flow 113 LPM (30 GPM) Performance Curves
Elements

Maximum Inlet 380 Bar (5500 PSI)

Flow vs. Inlet Pressure
Logic

Pressure (Pressure rise through cartridge only)

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
DC Maximum 350 Bar (5000 PSI) 6000 414
Pressure Setting
Directional
Controls

5000 345
Maximum Tank 350 Bar (5000 PSI)
Pressure 4000 276
Pressure, PSI

MV
Reseat Pressure 90% of crack pressure 3000 207
Manual
Valves

Leakage at 82 cc/min. (5 cu. in./min.) 2000 138

150 SSU (32 cSt) @75% of crack pressure
SV
1000 69
Cartridge Material All parts steel. All operating
Solenoid

parts hardened steel.

Valves

0
LPM 22.7 45.3 68.1 90.8 113.6
Operating Temp. -45°C to +93.3°C (“D”-Ring) 0
GPM 6 12 18 24 30
PV Range/Seals (-50°F to +200°F) Flow (Q)
Proportional

-31.7°C to +121.1°C (Fluorocarbon)

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
(-25°F to +250°F)
Valves

400 27.6

Fluid Mineral-based or synthetic with

RAH101S10
(minimum setting)
CE Compatibility/ lubricating properties at viscosities
300 20.7
Viscosity of 45 to 2000 SSU (6 to 420 cSt)
Electronics

Pressure, PSI
Coils &

Filtration ISO Code 16/13,

SAE Class 4 or better 200 13.8
BC
Approx. Weight .23 kg (.50 lbs.)
Bodies &
Cavities

100 6.9
Cavity C10-2
(See BC Section for more details)
TD 0
LPM 22.7 45.3 68.1 90.8 113.6
Form Tool Rougher None
Technical

0
Finisher NFT10-2F GPM 6 12 18 24 30
Flow (Q)
Data

PC29 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US Pilot Operated Relief Valve
Technical Information Series RAH101
CV
Dimensions Millimeters (Inches)

Valves
Check
SH
25.4 (1.00)
Dia. Knob

Shuttle
Valves
44.1 41.9
34.2 34.2 (1.74) (1.65) LM
(1.35)

Load/Motor
(1.35)

Controls
7/8-14 UNF-2A FC
Thread 1" Hex.

Controls
69-75 Nm 31.7

Flow
(51-55 lb. ft.) (1.25)
(2) Torque (2)
PC
(1) Ø 15.8

Pressure
(1)

Controls
(.62)

Screw/Knob Version Fixed Cap/Tamper Resistant Version LE

Elements
THIRD-ANGLE
PROJECTION

Logic
DC

Directional
Controls
Ordering Information

RAH101 MV
10 Size Pilot Adjustment Pressure Seals Optional Body Port

Manual
Operated Relief Style Range Pressure Material Size

Valves
Valve Setting

SV
Code Adjustment Style / Kit No. Code Seals / Kit No. Code Body Material

Solenoid
F Fixed style, preset at factory. Omit “D”-Ring / (SK10-2) Omit Steel

Valves
K Knob Adjust (717784-10) N Nitrile / (SK10-2N) A Aluminum
S Screw Adjust V Fluorocarbon / (SK10-2V)
T Tamper Resistant Cap (125407) Code Port Size Body Part No.
PV
Proportional
Optional Pressure Setting Omit Cartridge Only Valves
Code Pressure Range Pressure ÷ 10 4P 1/4″ NPTF (B10-2-*4P)
10 6.9 - 69 Bar (100 - 1000 PSI) i.e. 235 = 2350 PSI 6P 3/8″ NPTF (B10-2-*6P)
Standard Setting: (Omit if standard setting is used) 8P 1/2″ NPTF (B10-2-*8P)
Setting Range: CE
34.5 Bar (500 PSI) @ crack pressure, 6T SAE-6 (B10-2-*6T)
Electronics

approximately .95 LPM (.25 GPM) 100 to 5000 PSI T6T SAE-6 (B10-2-T6T)†
All settings at crack pressure,
Coils &

20 6.9 - 138 Bar (100 - 2000 PSI) 8T SAE-8 (B10-2-*8T)

approximately .95 LPM (.25 GPM) T8T SAE-8 (B10-2-T8T)†
Standard Setting:
69 Bar (1000 PSI) @ crack pressure, 6B 3/8″ BSPG (B10-2-6B)†
approximately .95 LPM (.25 GPM) * Add “A” for aluminum, omit for steel. BC
30 13.8 - 207 Bar (200 - 3000 PSI) † Steel body only.
Bodies &
Cavities

Standard Setting:
103.5 Bar (1500 PSI) @ crack pressure,
approximately .95 LPM (.25 GPM)
50 13.8 - 345 Bar (200 - 5000 PSI) TD
Standard Setting:
Technical

172.4 Bar (2500 PSI) @ crack pressure,

approximately .95 LPM (.25 GPM)
Data

PC30 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US Direct Acting Relief Valve
Technical Information Series A04B2FY*CE,HY*CE,PY*CE
CV
General Description
Valves

Direct Acting Poppet-Type Relief Valve. Pressure

Check

Equipment Directive (PED 97/23/EC) compliant to

SH hazard category IV. For additional information see
Technical Tips on pages PC1-PC6.
Shuttle
Valves

LM Features
•
Load/Motor

Fast response with good stability (1) (2)

Controls

• Compact space saving design

• Poppet type construction for lower leakage
FC • Full 420 Bar (6000 PSI) pressure capability
• Hardened working parts for maximum durability
Controls

• Tamperproof setting
Flow

(2)

PC
• All external parts zinc plated

(1)
Pressure
Controls

Specifications
LE Rated Flow 100 LPM (26 GPM) Performance Curves
(Pressure rise through cartridge only)
Elements

Maximum Inlet FY - 2-100 Bar (29-1450 PSI)

Logic

Pressure HY - 5-210 Bar (72-3000 PSI) Flow vs. Inlet Pressure

PY - 5-420 Bar (72-6000 PSI) PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
2900 200
DC
A04B2F & A04B2H
Directional

Maximum 420 Bar (6000 PSI)

Controls

A04B2H
Pressure Setting
2175 150
Pressure Drop

Sensitivity: FY - 11 Bar (165 PSI)

MV A04B2H
Pressure/Turn HY - 21 Bar (305 PSI)
PY - 44 Bar (630 PSI) 1450 100
Manual
Valves

Leakage at 5 drops/min. A04B2F

150 SSU (32 cSt) @ 100 Bar (1450 PSI) 725 50
SV
Cartridge Material All parts steel. All operating
Solenoid

parts hardened steel.

Valves

0
LPM 25 50 75 100
0
Operating Temp. -40°C to +93.3°C (Nitrile) GPM 6.6 13.2 19.8 26.4
PV Range/Seals (-40°F to +200°F) Flow (Q)
Flow vs. Inlet Pressure
Proportional

-31.7°C to +121.1°C (Fluorocarbon)

(-25°F to +250°F) PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
Valves

5800 400
A04B2P
Fluid Mineral-based or synthetic with
CE Compatibility/ lubricating properties at viscosities
Viscosity of 45 to 2000 SSU (6 to 420 cSt) 4350 300
Electronics

Pressure Drop
Coils &

Filtration ISO Code 16/13,

SAE Class 4 or better 2900 200
BC
Approx. Weight 0.25 kg (0.55 lbs.)
Bodies &
Cavities

1450 100
Cavity C10-2
(See BC Section for more details)
TD 0
Form Tool Rougher None LPM 25 50 75 100
Technical

0
Finisher NFT10-2F GPM 6.6 13.2 19.8 26.4
Flow (Q)
Data

PC17 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US Direct Acting Relief Valve
Technical Information Series A04B2FY*CE,HY*CE,PY*CE
CV
Dimensions Millimeters (Inches)

Valves
Check
2.0
(0.08)
max SH

Shuttle
Valves
LM
26 AF Hex.

Load/Motor
59 50 Nm

Controls
(2.32) (37 lb. ft.)
Torque

FC

Controls
Flow
7/8" - 14 UNF PC
31.8

Pressure
Controls
(1.25)
T (2)

LE
P (1)

Elements
Logic
DC

Directional
Controls
Ordering Information

A04B2 Y CE MV

10 Size Pressure Adjustment Optional Seals Body Port

Manual
Valves
Direct Acting Adjustment Style Pressure Material Size
Relief Valve Range Setting
SV

Solenoid
Code Pressure Adjustment Range Code Seals / Kit No. Code Body Material

Valves
F 2 - 100 Bar (29 - 1450 PSI) N Nitrile, Buna-N (Std.) / Omit Steel
H 5 - 210 Bar (72 - 3000 PSI) (SK30503NP-1) A Aluminum
P 5 - 420 Bar (72 - 6000 PSI) V Fluorocarbon / PV
(SK30503VP-1)
Proportional
Code Port Size Body Part No. Valves
Code Adjustment Style / Kit No. Omit Cartridge Only
Y Non Adjustable Preset (Std.) 4P 1/4″ NPTF (B10-2-*4P)
6P 3/8″ NPTF (B10-2-*6P) CE
8P 1/2″ NPTF (B10-2-*8P)
Electronics

Optional Pressure Setting 6T SAE-6 (B10-2-*6T)

Coils &

Setting must be specified (Bar) T6T SAE-6 (B10-2-T6T)†

8T SAE-8 (B10-2-*8T)
T8T SAE-8 (B10-2-T8T)†
6B 3/8″ BSPG (B10-2-6B)† BC
* Add “A” for aluminum, omit for steel.
Bodies &
Cavities

† Steel body only.

TD
Technical
Data

PC18 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US Pilot Operated Relief Valve
Technical Information Series RAH161
CV
General Description
Valves

Pilot Operated Spool-Type Relief Valve. For additional

Check

information see Technical Tips on pages PC1-PC6.

SH
Features
• Low override curve
Shuttle
Valves

• Ball-type pilot for added stability

LM • High accuracy - pilot operated design
•
Load/Motor

Hardened, precision ground parts for durability

Controls

• Compact size for reduced space requirements

• All external parts have yellow zinc dichromate. This
coating is ideal for salt spray applications.
Tank
(2)
FC
In Out
Controls

Pressure
(1) (2) (1)
Flow

PC
Pressure
Controls

Specifications
LE Maximum Flow 302.8 LPM (80 GPM) Performance Curve
Elements

Maximum Inlet 380 Bar (5500 PSI)

Flow vs. Inlet Pressure
Logic

Pressure (Pressure rise through cartridge only)

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
DC Maximum 350 Bar (5000 PSI) 6000 414
Pressure Setting
Directional
Controls

5000 345
Maximum Tank 350 Bar (5000 PSI)
Pressure
4000 276
MV
Pressure

Reseat Pressure 80% of crack pressure

3000 207
Manual
Valves

Leakage at 82 cc/min. (5 cu. in./min.)

150 SSU (32 cSt) @ 75% of crack pressure 2000 138
SV
Cartridge Material All parts steel. All operating 1000 69
Solenoid

parts hardened steel.

Valves

0
LPM 75.8 151.6 227.4 303.2
Operating Temp. -40°C to +93.3°C (Nitrile) 0
PV GPM 20 40 60 80
Range (Ambient) (-40°F to +200°F) Flow (Q)
Proportional

-31.7°C to +121.1°C (Fluorocarbon)

(-25°F to +250°F)
Valves

Fluid Mineral-based or synthetic with

CE Compatibility/ lubricating properties at viscosities
Viscosity of 45 to 2000 SSU (6 to 420 cSt)
Electronics
Coils &

Filtration ISO Code 16/13,

SAE Class 4 or better
BC
Approx. Weight 0.9 kg (2.0 lbs.)
Bodies &
Cavities

Cavity C16-2
(See BC Section for more details)
TD
Form Tool Rougher None
Technical

Finisher NFT16-2F
Data

PC31 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US Pilot Operated Relief Valve
Technical Information Series RAH161
CV
Dimensions Millimeters (Inches)

Valves
Check
38.1 (1.50)
Dia. Knob SH

Shuttle
Valves
36.9 39.5 38.8
36.4 (1.55)
(1.43) (1.45) (1.53)
LM

Load/Motor
Controls
1-1/2" Hex.
1-5/16-12 UN-2A 76 Nm FC
44.5 Thread (56 lb. ft.)
(1.75) Torque

Controls
Tank
(2)

Flow
PC
Pressure
(1) Ø 28.5

Pressure
Controls
(1.12)

Screw/Knob Version Fixed Cap/Tamper Resistant Version

LE
THIRD-ANGLE

Elements
PROJECTION

Logic
DC

Directional
Ordering Information

Controls
RAH161
MV
16 Size Adjustment Pressure Seals Optional Body Port
Pilot Operated Style Range Pressure Material Size

Manual
Valves
Relief Valve Setting

Code Adjustment Style / Kit No. Code Seals / Kit No. Code Body Material SV
F Fixed style, preset at factory. Omit Nitrile / (SK16-2) Omit Steel

Solenoid
Valves
K Knob Adjust (717784-15) V Fluorocarbon / (SK16-2V) A Aluminum
S Screw Adjust
T Tamper Resistant Cap (717785) Optional Pressure Setting Code Port Size Body Part No. PV
Proportional
Pressure ÷ 10 Omit Cartridge Only
Code Pressure Range i.e. 235 = 2350 PSI 12P 3/4″ NPTF (B16-2-*12P)
Valves
(Omit if standard setting is used) 16P 1″ NPTF (B16-2-*16P)
10 6.9 - 69 Bar (100 - 1000 PSI) Setting Range:
Standard Setting: 100 to 5000 PSI 8T SAE-8 (B16-2-*8T)
34.5 Bar (500 PSI) All settings at 37.5 LPM (10 GPM) 12T SAE-12 (B16-2-*12T) CE
@ 37.5 LPM (10 GPM) 16T SAE-16 (B16-2-*16T)
Electronics

20 13.8 - 138 Bar (200 - 2000 PSI) 12B 3/4″ BSPG (B16-2-12B)†
Coils &

Standard Setting: 16B 1″ BSPG (B16-2-*16B)

69 Bar (1000 PSI) * Add “A” for aluminum, omit for steel.
@ 37.5 LPM (10 GPM) † Steel body only.
BC
30 20.7 - 207 Bar (300 - 3000 PSI)
Standard Setting:
Bodies &
Cavities

103.5 Bar (1500 PSI)

@ 37.5 LPM (10 GPM)
50 34.5 - 345 Bar (500 - 5000 PSI)
Standard Setting: TD
172.4 Bar (2500 PSI)
Technical

@ 37.5 LPM (10 GPM)

Data

PC32 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US Pilot Operated, Ventable Relief Valve
Technical Information Series A04H3
CV
General Description
Valves

Pilot Operated, Spool-Type, Ventable Relief Valve.

Check

For additional information see Technical Tips on

SH pages PC1-PC6.

Features
Shuttle
Valves

• High flow capacity

LM • Full tank line back pressure capability

• Excellent flow pressure characteristics for consistent
Load/Motor
Controls

pressure setting
• Ideal for pump relief and remote control or unloading via
vent (port 3) (3)
FC
• Integral 250 micron pilot flow filter (3)

•
Controls

Hardened working parts for maximum durability

Flow

(1) (2)
• Adjustable and tamperproof versions available
PC • All external parts zinc plated (2)
Pressure
Controls

(1)

LE Specifications Performance Curves

Elements

Rated Flow 190 LPM (50 GPM)

(Pressure rise through cartridge only)
Logic

Flow vs. Inlet Pressure 1 to 2

Maximum Inlet H- 10-210 Bar (145-3000 PSI) PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
5800 400
DC Pressure P- 10-420 Bar (145-6000 PSI)
Directional
Controls

Maximum 420 Bar (6000 PSI)

Pressure Setting 4350 300
Pressure Drop

MV Maximum Tank 420 Bar (6000 PSI)

Pressure 2900 200
Manual
Valves

Leakage at 25 ml/min.
150 SSU (32 cSt) @ 100 Bar (1450 PSI) 1450 100
SV
Cartridge Material All parts steel. All operating
Solenoid

parts hardened steel.

Valves

0
LPM 50 100 150 200
0
Operating Temp. -40°C to +93.3°C (Nitrile) GPM 13.2 26.4 39.6 52.8
PV Flow (Q)
Range/Seals (-40°F to +200°F)
Vented Open Pressure Drop 1 to 2
Proportional

-31.7°C to +121.1°C (Fluorocarbon)

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
(-25°F to +250°F)
Valves

290 20

Fluid Mineral-based or synthetic with

CE Compatibility/ lubricating properties at viscosities
Viscosity of 45 to 2000 SSU (6 to 420 cSt) 218 15
Electronics

Pressure Drop
Coils &

Filtration ISO Code 16/13,

SAE Class 4 or better 145 10
BC
Approx. Weight 0.25 kg (0.55 lbs.)
Bodies &
Cavities

73 5
Cavity C10-3S
(See BC Section for more details)
TD 0
Form Tool Rougher None LPM 50 100 150 200
Technical

0
Finisher GPM 13.2 26.4 39.6 52.8
Flow (Q)
Data

PC41 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US Pilot Operated, Ventable Relief Valve
Technical Information Series A04H3
CV
Dimensions Millimeters (Inches)

Valves
Check
5 AF Hex socket

SH
22
(0.87)

Shuttle
Valves
max
17 AF Hex.
12 Nm
(9 lb. ft.) LM

Load/Motor
Torque

Controls
26 AF Hex.
39.5 50 Nm
(1.56) (37 lb. ft.)
Torque
FC

Controls
Flow
7/8" - 14 UNF
V (3) PC

Pressure
47

Controls
(1.85)

T (2)
LE

Elements
Logic
P (1)

DC

Directional
Controls
Ordering Information

A04H3 MV

10 Size Pressure Adjustment Optional Seals

Manual
Valves
Pilot Operated Adjustment Style Pressure
Relief Valve Range Setting
SV
Order Bodies Separately

Solenoid
Code Pressure Adjustment Range Optional Pressure Setting

Valves
H 10 - 210 Bar (145 - 3000 PSI) Specify setting if required (Bar)
P 10 - 420 Bar (145 - 6000 PSI) A04H3H Standard Setting: LB10
100 Bar (1450 PSI) Line Body Porting Body PV
@ 15 LPM (4.0 GPM)
Proportional
Material
Code Adjustment Style / Kit No. A04H3P Standard Setting:
Valves
Z Screw Adjust (Std.) 200 Bar (2900 PSI) Code Porting
W Knob Adjust @ 15 LPM (4.0 GPM)
710 5/8″ SAE (main)
T Tamper Resistant Cap (TC1130) 3/8″ SAE (aux) CE
Code Seals / Kit No.
Electronics

711 3/4″ BSP (main)

N Nitrile, Buna-N (Std.) / 1/4″ BSP (aux)
Coils &

(SK30504N-1)
V Fluorocarbon / Code Body Material
(SK30504V-1) BC
A Aluminum
S Steel
Bodies &
Cavities

TD
Technical
Data

PC42 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US P.O. Pressure Reducing/Relieving Valve
Technical Information Series PRH101
CV
General Description
Valves

Pilot Operated Pressure Reducing/Relieving Valve.

Check

For additional information see Technical Tips on

SH pages PC1-PC6.
Shuttle
Valves

Features
LM • Hardened, precision ground parts for durability
Load/Motor

• Low profile adapter for minimal space requirements

Controls

• Fully guided poppet for more consistent reseat

(3)
• Steel adapters are coated with yellow zinc dichromate for
(3)
FC protection from salt spray
• Polyurethane “D”-Ring eliminates backup rings and (2)
Controls

prevents hydrolysis
Flow

• Internal screening protects pilot spring from debris (2)

PC (1)
(1)
Pressure
Controls

LE Specifications Performance Curves

Elements

Rated Flow 56.3 LPM (15 GPM) Flow vs. Regulated Pressure (Through cartridge only)
Logic

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)

6000 414
Maximum Inlet 380 Bar (5500 PSI)
DC Pressure
5000 345
Directional
Controls

Maximum 350 Bar (5000 PSI)

4000 276
Pressure, PSI

Pressure Setting

MV Maximum Tank 350 Bar (5000 PSI) 3000 207

Pressure
Manual
Valves

2000 138
Maximum 0.94 LPM (0.25 GPM)
Drain Flow 1000 69
SV
Cartridge Material All parts steel. All operating 0 Relieving Reducing
Solenoid

parts hardened steel. LPM 57 38 19 0 19 38 57

Valves

GPM 15 10 5 0 5 10 15
Flow (Q)
Operating Temp. -45°C to +93.3°C (“D”-Ring)
PV Range/Seals (-50°F to +200°F) Pressure vs. Flow (Through cartridge only)
Proportional

-31.7°C to +121.1°C (Fluorocarbon) PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
(-25°F to +250°F) 400 27.6
Valves

Fluid Mineral-based or synthetic with

CE Campatibility/ lubricating properties at viscosities 300 20.7
Viscosity of 45 to 2000 SSU (6 to 420 cSt)
Electronics

Pressure, PSI

Port 2 to 1
Coils &

Filtration ISO Code 16/13,

200 13.8
SAE Class 4 or better
BC
Approx. Weight .23 kg (0.5 lbs.)
Bodies &
Cavities

100 6.9

Cavity C10-3
(See BC Section for more details)
TD 0
LPM 11.4 22.7 34.1 45.4 56.8
Form Tool Rougher NTF10-3R 0
Technical

GPM 3 6 9 12 15
Finisher NFT10-3F Flow (Q)
Data

PC97 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US P.O. Pressure Reducing/Relieving Valve
Technical Information Series PRH101
CV
Dimensions Millimeters (Inches)

Valves
Check
25.4 (1.00)
Dia. Knob SH

Shuttle
Valves
44.1 41.9
34.2 34.2 (1.74) (1.65)
(1.35) (1.35)
LM

Load/Motor
Controls
1" Hex. FC
69-75 Nm
7/8-14 UNF-2A (51-55 lb. ft.)

Controls
(3) Thread Torque (3) 45.9

Flow
(1.81)

(2) (2) PC

Pressure
Controls
(1) (1)
Ø 15.8
(.62)
LE

Elements
THIRD-ANGLE
PROJECTION
Screw/Knob Version Fixed Cap/Tamper Resistant Version

Logic
DC

Directional
Ordering Information

Controls
PRH101
MV
10 Size Adjustment Pressure Seals Optional Body Port
P.O. Pressure Style Range Pressure Material Size

Manual
Valves
Reducing/Relieving Setting
Valve

Code Adjustment Style / Kit No. Code Seals / Kit No. Code Body Material SV
F Fixed style, preset at factory. Omit “D”-Ring / (SK10-3) Omit Steel

Solenoid
Valves
K Knob Adjust (717784-10) N Nitirle / (SK10-3N) A Aluminum
S Screw Adjust V Fluorocarbon / (SK10-3V)
T Tamper Resistant Cap (718083) Code Port Size Body Part No. PV
Proportional
Optional Pressure Setting Omit Cartridge Only
Code Pressure Range Pressure ÷ 10 4P 1/4″ NPTF (B10-3-*4P)
Valves

10 6.9 - 69 Bar (100 - 1000 PSI) i.e. 235 = 2350 PSI 6P 3/8″ NPTF (B10-3-*6P)
Standard Setting: (Omit if standard setting is used) 8P 1/2″ NPTF (B10-3-*8P)
34.5 Bar (500 PSI) @ crack pressure, Setting Range: 6T SAE-6 (B10-3-*6T) CE
approximately .95 LPM (.25 GPM) 100 to 5000 PSI 8T SAE-8 (B10-3-*8T)
Electronics

All settings at crack pressure,

20 6.9 - 138 Bar (100 - 2000 PSI) 6B 3/8″ BSPG (B10-3-6B)†
Coils &

approximately .95 LPM (.25 GPM)

Standard Setting: 8B 1/2″ BSPG (B10-3-*8P)
69 Bar (1000 PSI) @ crack pressure, * Add “A” for aluminum, omit for steel.
approximately .95 LPM (.25 GPM) † Steel body only.
BC
30 13.8 - 207 Bar (200 - 3000 PSI)
Standard Setting:
Bodies &
Cavities

103.5 Bar (1500 PSI) @ crack pressure,

approximately .95 LPM (.25 GPM)
50 13.8 - 345 Bar (200 - 5000 PSI)
Standard Setting: TD
172.4 Bar (2500 PSI) @ crack pressure,
Technical

approximately .95 LPM (.25 GPM)

Data

PC98 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US P.O Pressure Reducing/Relieving Valve
Technical Information Series PRH121
CV
General Description
Valves

Pilot Operated Pressure Reducing/Relieving Valve.

Check

For additional information see Technical Tips

SH on pages PC1-PC6.
Shuttle
Valves

Features
LM • Hardened, precision ground parts for durability
Load/Motor

• Ball-type pilot for added stability

Controls

• Full capacity reducing/relieving Tank

(3)
• Performs job of two separate valves in one
(3)
FC
• All external parts have yellow zinc dichromate. This
coating is ideal for salt spray applications. Pressure/
Controls

Inlet (2)
Flow

(2)

PC
(1) Reg. (1) Relief
Pressure
Controls

LE Specifications Performance Curve

Elements

Rated Flow 113.7 LPM (30 GPM)

Flow vs. Regulated Pressure
Logic

(Pressure rise through cartridge only)

Maximum Inlet 380 Bar (5500 PSI) PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
DC Pressure 6000 414
Directional
Controls

Maximum 350 Bar (5000 PSI) 5000 345

Pressure Setting
4000 276
MV Maximum Tank 350 Bar (5000 PSI)
Pressure

Pressure 3000 207

Manual
Valves

Maximum 0.94 LPM (0.25 GPM) 2000 138

Drain Flow
SV
1000 69
Cartridge Material All parts steel. All operating
Solenoid

parts hardened steel.

Valves

0 Relieving Reducing
LPM 113.7 75.8 37.9 0 37.9 75.8 113.7
Operating Temp. -40°C to +93.3°C (Nitrile) GPM 30 20 10 0 10 20 30
PV Range/Seals (-40°F to +200°F) Flow (Q)
Proportional

-31.7°C to +121.1°C (Fluorocarbon)

(-25°F to +250°F)
Valves

Fluid Mineral-based or synthetic with

CE Campatibility/ lubricating properties at viscosities
Viscosity of 45 to 2000 SSU (6 to 420 cSt)
Electronics
Coils &

Filtration ISO Code 16/13,

SAE Class 4 or better
BC
Approx. Weight .27 kg (0.6 lbs.)
Bodies &
Cavities

Cavity C12-3
(See BC Section for more details)
TD
Form Tool Rougher NTF12-3R
Technical

Finisher NFT12-3F
Data

PC99 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US P.O. Pressure Reducing/Relieving Valve
Technical Information Series PRH121
CV
Dimensions Millimeters (Inches)

Valves
Check
SH
38.1 (1.50)

Shuttle
Valves
Dia. Knob
36.0 37.7 39.6 38.9
(1.42) (1.48) (1.56) (1.53)
LM

Load/Motor
Controls
1-1/4" Hex.
1-1/16-12 UNF-2A 76 Nm FC
Thread (56 lb. ft.)
(3) Torque

Controls
57.9
(2.28)

Flow
(2) PC

Pressure
Controls
(1) Ø 22.2 (.87)
LE
Screw/Knob Version Fixed Cap/Tamper Resistant Version

Elements
THIRD-ANGLE
PROJECTION

Logic
DC

Directional
Controls
Ordering Information

PRH121 MV
12 Size Adjustment Pressure Seals Optional Body Port

Manual
P.O. Pressure Style Range Pressure Material Size

Valves
Reducing/Relieving Setting
Valve
SV
Code Adjustment Style / Kit No. Code Seals / Kit No. Code Body Material

Solenoid
F Fixed style, preset at factory. Omit Nitrile / (SK12-3) Omit Steel

Valves
K Knob Adjust (717784-15) V Fluorocarbon / (SK12-3V) A Aluminum
S Screw Adjust
T Tamper Resistant Cap (717785) Optional Pressure Setting Code Port Size Body Part No.
PV
Proportional
Pressure ÷ 10 Omit Cartridge Only Valves
Code Pressure Range i.e. 235 = 2350 PSI 8T SAE-8 (B12-3-*8T)
(Omit if standard setting is used) 12T SAE-12 (B12-3-*12T)
10 6.9 - 69 Bar (100 - 1000 PSI) Setting Range:
Standard Setting: 100 to 5000 PSI 8B 1/2″ BSPG (B12-3-8B)† CE
34.5 Bar (500 PSI) All settings at 11.3 LPM (3 GPM) * Add “A” for aluminum, omit for steel.
Electronics

@ 11.3 LPM (3 GPM) † Steel body only.

Coils &

20 13.8 - 138 Bar (200 - 2000 PSI)

Standard Setting:
69 Bar (1000 PSI)
@ 11.3 LPM (3 GPM) BC
30 20.7 - 207 Bar (300 - 3000 PSI)
Bodies &
Cavities

Standard Setting:
103.5 Bar (1500 PSI)
@ 11.3 LPM (3 GPM)
50 34.5 - 345 Bar (500 - 5000 PSI) TD
Standard Setting:
Technical

172.4 Bar (2500 PSI)

@ 11.3 LPM (3 GPM)
Data

PC100 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US P.O. Sequence Valve (Internal Pilot)
Technical Information Series SVH101
CV
General Description
Valves

Pilot Operated Sequence Valve (Internally Piloted,

Check

Externally Drained). For additional information

SH see Technical Tips on pages PC1-PC6.

Features
Shuttle
Valves

• Hardened, precision ground parts for durability

LM • Low profile adapter for minimal space requirements

• Fully guided poppet for more consistent reseat
Load/Motor
Controls

• Steel adapters are coated with yellow zinc dichromate for

protection from salt spray (3)

FC • Polyurethane “D”-Ring eliminates backup rings and

prevents hydrolysis
(2)
•
Controls

Internal screening protects pilot spring from debris (1) (2)

Flow

(3)
PC Specifications
(1)
Pressure

Rated Flow 56.3 LPM (15 GPM)

Controls

Maximum Inlet 380 Bar (5500 PSI)

LE Pressure
Performance Curves
Elements

Maximum 350 Bar (5000 PSI) Flow vs. Inlet Pressure

Logic

Pressure Setting (Pressure rise through cartridge only)

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
DC Maximum Tank 350 Bar (5000 PSI) 6000 414
Pressure
Directional
Controls

5000 345
Maximum Drain 0.94 LPM (0.25 GPM)
Flow (Port 3) 4000 276
Pressure, PSI

MV
Reseat Pressure 90% of crack pressure
3000 207
Manual
Valves

Leakage at 82 cc/min. (5 cu. in./min.)

2000 138
150 SSU (32 cSt) @ 210 Bar (3000 PSI)
SV
Cartridge Material All parts steel. All operating 1000 69
Solenoid

parts hardened steel.

Valves

0
LPM 11.4 22.7 34.1 45.4 56.8
Operating Temp. -45°C to +93.3°C (“D”-Ring) 0
GPM 3 6 9 12 15
PV Range/Seals (-50°F to +200°F) Flow (Q)
Proportional

-31.7°C to +121.1°C (Fluorocarbon)

(-25°F to +250°F) PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
Valves

400 27.6

Fluid Mineral-based or synthetic with Low Range

CE Campatibility/ lubricating properties at viscosities
Viscosity of 45 to 2000 SSU (6 to 420 cSt) 300 20.7
Electronics

Pressure, PSI
Coils &

Filtration ISO Code 16/13,

SAE Class 4 or better 200 13.8
BC
Approx. Weight .45 kg (1.0 lbs.)
Bodies &
Cavities

100 6.9
Cavity C10-3
(See BC Section for more details)
TD 0
Form Tool Rougher NTF10-3R LPM 11.4 22.7 34.1 45.4 56.8
Technical

0
Finisher NFT10-3F GPM 3 6 9 12 15
Flow (Q)
Data

PC57 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US P.O. Sequence Valve (Internal Pilot)
Technical Information Series SVH101
CV
Dimensions Millimeters (Inches)

Valves
Check
SH
25.4 (1.00)
Dia. Knob

Shuttle
Valves
44.1 41.9
34.2 34.2 (1.74) (1.65) LM

Load/Motor
(1.35) (1.35)

Controls
1" Hex. FC
69-75 Nm
(51-55 lb. ft.)

Controls
7/8-14 UNF-2A
(3) Thread Torque (3)

Flow
45.9
(1.81)
PC
(2) (2)

Pressure
Controls
(1) Ø 15.8 (1)
(.62) LE

Elements
THIRD-ANGLE
PROJECTION
Screw/Knob Version Fixed Cap/Tamper Resistant Version

Logic
DC

Directional
Controls
Ordering Information

SVH101 MV
10 Size Adjustment Pressure Seals Optional Body Port

Manual
P.O. Sequence Style Range Pressure Material Size

Valves
Valve Setting
(Internal Pilot)
SV
Code Adjustment Style / Kit No. Code Seals / Kit No. Code Body Material

Solenoid
F Fixed style, preset at factory. Omit “D”-Ring / (SK10-3) Omit Steel

Valves
K Knob Adjust (717784-10) N Nitrile / (SK10-3N) A Aluminum
S Screw Adjust V Fluorocarbon / (SK10-3V)
T Tamper Resistant Cap (718083) Code Port Size Body Part No. PV
Proportional
Optional Pressure Setting Omit Cartridge Only Valves
Code Pressure Range Pressure ÷ 10 4P 1/4″ NPTF (B10-3-*4P)
10 6.9 - 69 Bar (100 - 1000 PSI) i.e. 235 = 2350 PSI 6P 3/8″ NPTF (B10-3-*6P)
Standard Setting: (Omit if standard setting is used) 8P 1/2″ NPTF (B10-3-*8P)
34.5 Bar (500 PSI) @ crack pressure, Setting Range: 6T SAE-6 (B10-3-*6T) CE
100 to 5000 PSI
Electronics

approximately .95 LPM (.25 GPM) 8T SAE-8 (B10-3-*8T)

All settings at crack pressure,
Coils &

20 6.9 - 138 Bar (100 - 2000 PSI) approximately .95 LPM (.25 GPM) 6B 3/8″ BSPG (B10-3-6B)†
Standard Setting: 8B 1/2″ BSPG (B10-3-*8B)
69 Bar (1000 PSI) @ crack pressure, * Add “A” for aluminum, omit for steel.
approximately .95 LPM (.25 GPM) † Steel body only. BC
30 13.8 - 207 Bar (200 - 3000 PSI)
Bodies &

Standard Setting:
Cavities

103.5 Bar (1500 PSI) @ crack pressure,

approximately .95 LPM (.25 GPM)
50 13.8 - 345 Bar (200 - 5000 PSI)
Standard Setting: TD
172.4 Bar (2500 PSI) @ crack pressure,
Technical

approximately .95 LPM (.25 GPM)

Data

PC58 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US P.O. Sequence Valve (External Pilot)
Technical Information Series SVH102
CV
General Description
Valves

Pilot Operated Sequence Valve (Externally Piloted,

Check

Internally Vented). For additional information see

SH Technical Tips on pages PC1-PC6.

Features
Shuttle
Valves

• Hardened, precision ground parts for durability

LM • Low profile adapter for minimal space requirements

• Fully guided poppet for more consistent reseat
Load/Motor
Controls

• Steel adapters are coated with yellow zinc dichromate for

protection from salt spray (3)

FC • Polyurethane “D”-Ring eliminates backup rings and

prevents hydrolysis
(2)
•
Controls

Internal screening protects pilot spring from debris (2) (3)

Flow

(1)
PC Specifications
(1)
Pressure

Rated Flow 56.3 LPM (15 GPM)

Controls

Maximum Inlet 380 Bar (5500 PSI)

LE Pressure
Performance Curve
Elements

Maximum 350 Bar (5000 PSI) Flow vs. Inlet Pressure

Logic

Pressure Setting (Pressure rise through cartridge only)

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
DC Maximum Tank 350 Bar (5000 PSI) 250 17
Pressure
Directional
Controls

200 14
Maximum See maximum drain flow chart
Drain Flow (Lower right)
Pressure, PSI

MV 150 10
Reseat Pressure 90% of crack pressure
Manual
Valves

Leakage at 82 cc/min. (5 cu. in./min.) 100 6.8

150 SSU (32 cSt) @ 210 Bar (3000 PSI)
SV
50 3.4
Cartridge Material All parts steel. All operating
Solenoid

parts hardened steel.

Valves

0
LPM 11.4 22.7 34.1 45.4 56.8
Operating Temp. -45°C to +93.3°C (“D”-Ring) 0
GPM 3 6 9 12 15
PV Range/Seals (-50°F to +200°F) Flow (Q)
Proportional

-31.7°C to +121.1°C (Fluorocarbon)

(-25°F to +250°F)
Valves

Fluid Mineral-based or synthetic with

CE Campatibility/ lubricating properties at viscosities Maximum Drain Flow
Viscosity of 45 to 2000 SSU (6 to 420 cSt)
Electronics

PPILOT - PSETTING Drain Flow

Coils &

Filtration ISO Code 16/13,

SAE Class 4 or better 6.9 Bar (100 PSI) 0.34 LPM (0.09 GPM)
BC 35 Bar (500 PSI) 0.76 LPM (0.20 GPM)
Approx. Weight .45 kg (1.0 lbs.) 69 Bar (1000 PSI) 1.08 LPM (0.29 GPM)
Bodies &
Cavities

Cavity C10-3 138 Bar (2000 PSI) 1.53 LPM (0.40 GPM)
(See BC Section for more details) 207 Bar (3000 PSI) 1.87 LPM (0.50 GPM)
TD
Form Tool Rougher NTF10-3R
Technical

Finisher NFT10-3F
Data

PC61 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US P.O. Sequence Valve (External Pilot)
Technical Information Series SVH102
CV
Dimensions Millimeters (Inches)

Valves
Check
25.4 (1.00) SH
Dia. Knob

Shuttle
Valves
44.1 41.9
34.2 34.2 (1.74) (1.65)
(1.35) (1.35) LM

Load/Motor
Controls
1" Hex. FC
7/8-14 UNF-2A 69-75 Nm
(51-55 lb. ft.)

Controls
(3) Thread (3) 45.9
Torque

Flow
(1.81)

(2) (2)
PC

Pressure
Controls
(1) Ø 15.8 (1)
(.62)
LE

Elements
THIRD-ANGLE Screw/Knob Version Fixed Cap/Tamper Resistant Version
PROJECTION

Logic
DC

Directional
Controls
Ordering Information

SVH102 MV
10 Size Adjustment Pressure Seals Optional Body Port

Manual
P.O. Sequence Style Range Pressure Material Size

Valves
Valve Setting
(External Pilot)
SV
Code Adjustment Style / Kit No. Code Seals / Kit No. Code Body Material

Solenoid
F Fixed style, preset at factory. Omit “D”-Ring / (SK10-3) Omit Steel

Valves
K Knob Adjust (717784-10) N Nitrile / (SK10-3N) A Aluminum
S Screw Adjust V Fluorocarbon / (SK10-3V)
T Tamper Resistant Cap (718083) Code Port Size Body Part No. PV
Proportional
Optional Pressure Setting Omit Cartridge Only Valves
Code Pressure Range Pressure ÷ 10 4P 1/4″ NPTF (B10-3-*4P)
10 6.9 - 69 Bar (100 - 1000 PSI) i.e. 235 = 2350 PSI 6P 3/8″ NPTF (B10-3-*6P)
Standard Setting: (Omit if standard setting is used) 8P 1/2″ NPTF (B10-3-*8P)
34.5 Bar (500 PSI) @ crack pressure, Setting Range: 6T SAE-6 (B10-3-*6T) CE
100 to 5000 PSI
Electronics

approximately .95 LPM (.25 GPM) 8T SAE-8 (B10-3-*8T)

All settings at crack pressure,
Coils &

20 6.9 - 138 Bar (100 - 2000 PSI) approximately .95 LPM (.25 GPM) 6B 3/8″ BSPG (B10-3-6B)†
Standard Setting: 8B 1/2″ BSPG (B10-3-*8B)
69 Bar (1000 PSI) @ crack pressure, * Add “A” for aluminum, omit for steel.
approximately .95 LPM (.25 GPM) † Steel body only. BC
30 13.8 - 207 Bar (200 - 3000 PSI)
Bodies &

Standard Setting:
Cavities

103.5 Bar (1500 PSI) @ crack pressure,

approximately .95 LPM (.25 GPM)
50 13.8 - 345 Bar (200 - 5000 PSI)
Standard Setting: TD
172.4 Bar (2500 PSI) @ crack pressure,
Technical

approximately .95 LPM (.25 GPM)

Data

PC62 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US Counterbalance Valve
Technical Information Series CB101
CV
General Description
Valves

Cartridge Style Counterbalance Valve.

Check

For additional information see Technical Tips

SH on pages LM1-LM4.
Shuttle
Valves

Features
LM • Sealed spool type design for improved stability and
accuracy as well as low leakage
Load/Motor
Controls

• Low leakage poppet-type check valve for reliable load

holding

FC • All external parts have yellow zinc dichromate finish. Pilot

(3)
• Parker cartridge design for ease of installation and
Controls

maintenance (2) Valve

(2)
Flow

• Compact size for reduced space requirements

(3)
PC
Cylinder
(1)
Pressure

(1)
Controls

LE Specifications Performance Curve

Flow vs. Pressure Drop
Elements

Rated Flow 45 LPM (12 GPM) (Through cartridge only)

Logic

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)

Maximum 380 Bar (5500 PSI) - Steel 250 17.2
DC
Inlet Pressure 210 Bar (3000 PSI) - Aluminum
Directional
Controls

Maximum 350 Bar (5000 PSI) - Steel 200 13.8

Pressure Drop ( P)

Setting Pressure 210 Bar (3000 PSI) - Aluminum

MV 150 10.3
Leakage at 5 drops/min. (.33 cc/min.) @
150 SSU (32 cSt) 80% of thermal crack pressure Controlled Flow
Manual
Valves

100 6.9
Cartridge Material All parts steel. All operating
parts hardened steel. Free Flow
SV 50 3.5

Operating Temp. -40°C to +93.3°C (Nitrile)

Solenoid
Valves

Range/Seals (-40°F to +200°F) 0

LPM 8 15 23 30 38 45 53
-31.7°C to +121.1°C (Fluorocarbon) 0
(-25°F to +250°F) GPM 2 4 6 8 10 12 14
PV Flow (Q)
Proportional

Fluid Mineral-based or synthetic with

Valves

Compatibility/ lubricating properties at viscosities

Viscosity of 45 to 2000 SSU (6 to 420 cSt)
CE
Filtration ISO Code 16/13,
Electronics

SAE Class 4 or better

Coils &

Approx. Weight .23 kg (0.5 lbs.)

BC
Cavity C10-3
(See BC Section for more details)
Bodies &
Cavities

Form Tool Rougher NFT10-3R

Finisher NFT10-3F
TD
Technical
Data

LM5 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US Counterbalance Valve
Technical Information Series CB101
CV
Dimensions Millimeters (Inches)

Valves
Check
Fixed Cap Tamper Proof SH
4.8 (.19) 38.1 (1.50)
Hollow Hex. Dia. Knob

Shuttle
Valves
LM

Load/Motor
Controls
70.3
65.9
(2.77)
(2.59)

FC
1" Hex.
22 Nm

Controls
(16 lb. ft.)

Flow
Torque

PC
7/8-14 UNC-2A
(3)

Pressure
Thread

Controls
48.0
(1.89)
(2)
LE

Elements
Logic
Ø 15.8 (.622) (1)
Ø 17.4 (.685) Ø 15.7 (.620)
Ø 17.3 (.683) DC

Directional
Controls
THIRD-ANGLE
PROJECTION

MV

Ordering Information

Manual
Valves
CB101 SV
Counterbalance Pilot Adjustment Pressure Seals Optional Body Port

Solenoid
Valves
Cartridge Valve Ratio Style Range Pressure Material Size
Setting

PV
Code Pilot Ratio Code Pressure Range Code Seals / Kit No. Code Body Material
Proportional

A 3:1 10 20.7 - 90 Bar (300 - 1300 PSI) Omit Nitrile / Omit Steel
Valves

B 4.5:1 Standard Setting: (SK10-3N) A Aluminum

69 Bar (1000 PSI) V Fluorocarbon /
C 7:1 @ 11.3 LPM (3 GPM) (SK10-3V) CE
20 69 - 172.4 Bar (1000 - 2500 PSI) Code Port Size Body Part No.
Electronics

Code Adjustment Style/Kit No. Standard Setting: Omit Cartridge Only

Optional Pressure
Coils &

F Fixed style, 138 Bar (2000 PSI) 6T SAE-6 (B10-3-*6T)

@ 11.3 LPM (3 GPM) Setting
preset at factory. 8T SAE-8 (B10-3-*8T)
30 138 - 350 Bar (2000 - 5000 PSI) Pressure ÷ 10
K Knob Adjust i.e. 235 = 2350 PSI 6B 3/8″ BSPG (B10-3-6B)†
(717784-10) Standard Setting: 8B 1/2″ BSPG (B10-3-*8P) BC
210 Bar (3000 PSI) Setting Range:
S Screw Adjust 300 to 5000 PSI * Body is available in steel or aluminum.
Bodies &

@ 11.3 LPM (3 GPM)

Cavities

All settings at † Steel body only.

T Tamper Resistant Cap
(717785) 11.3 LPM (3 GPM)

TD
Technical
Data

LM6 Parker Hannifin Corporation

Hydraulic Cartridge Systems
 Catalog HY15-3501/US Load Control Valve
Technical Information Series E2A060, E2B060, E2H060, E2J060
CV
General Description
Threaded Cartridge Style Counterbalance Valve.
Valves
Check

Pilot assisted, designed for motion control

applications. For additional information see
SH Technical Tips on pages LM1-LM4.
Shuttle
Valves

Features
LM • Poppet construction for minimal leakage
• Incorporates direct acting relief valve for overload
Load/Motor

protection
Controls

• Includes reverse check valve within body, saving space

and minimizing installation cost (3)

FC • Excellent control and very good stability (1)

• Four pilot ratios available, 1.75:1, 3:1, and 5:1 for

(3)
(2)
Controls

cylinders and 8:1 for motor control

Flow

• Hardened working parts for maximum durability

(2)
PC • Adjustable and tamper resistant versions also available (1)

• All external parts zinc plated

Pressure
Controls

LE
Elements
Logic

DC Specifications Performance Curves

Directional

Relief & Pilot Performance 1 to 2

Controls

Rated Flow 120 LPM (32 GPM)

PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
5800 400
Pressure 50 - 350 Bar (725 - 5000 PSI)
MV RELIEF
Pressure Drop Bar, PSI

Sensitivity: 44 Bar (640 PSI) 4350 300

Pressure/Turn
Manual
Valves

Pilot Ratio E2A060 - 8:1 2900 200

SV E2B060 - 3:1 E2H060
E2H060 - 1.75 : 1
Solenoid

E2J060 - 5:1 PILOT PRESSURE WITH

Valves

1450 100 100 BAR LOAD E2B060

E2J060
Cartridge Material All parts steel. All operating E2A060
PV parts hardened steel. 0
LPM 20 40 60 80 100 120
Proportional

0
GPM 5.3 10.6 15.9 21.1 26.4 31.7
Operating Temp. -40°C to +93.3°C (Nitrile)
Valves

Flow (Q)
Range/Seals (-40°F to +200°F)
-31.7°C to +121.1°C (Fluorocarbon) Pressure Drop vs Flow
CE (-25°F to +250°F) PSI Bar Hydraulic Oil 150 SSU @ 100°F (32 cSt)
290 20
Electronics

Fluid Mineral-based or synthetic with

PressurDrop Bar, PSI
Coils &

Compatibility/ lubricating properties at viscosities 218 15

Viscosity of 45 to 2000 SSU (6 to 420 cSt)
BC
145 10
Filtration ISO Code 16/13,
PILOTED OPEN 1 to 2
Bodies &

SAE Class 4 or better

Cavities

& FREE FLOW 2 to 1

73 5
Approx. Weight 0.54 kg (1.19 lbs.)
TD 0
Cavity 3C LPM 20 40 60 80 100 120
0
Technical

(See BC Section for more details) GPM 5.3 10.6 15.9 21.1 26.4 31.7
Flow (Q)
Data

LM21 Parker Hannifin Corporation

Hydraulic Cartridge Systems
Catalog HY15-3501/US Load Control Valve
Technical Information Series E2A060, E2B060, E2H060, E2J060
CV
Dimensions Millimeters (Inches)

Valves
Check
13
(0.51) 5 AF Hex socket
max SH

17 AF Hex

Shuttle
Valves
12 Nm
9 lb ft
torque
LM
47

Load/Motor
(1.85) 35 AF Hex

Controls
85 Nm
63 lb ft
torque
FC
1-3/16 - 12 UNF

Controls
Thread

Flow
(3)

87 PC
(3.43) (2)

Pressure
Controls
(1)
LE

Elements
Logic
DC

Directional
Controls
Ordering Information
MV
E2 060

Manual
Valves
Load Pilot Adjustment Cracking Seals
Control Ratio Style Pressure
Valve
SV
Code Pilot Ratio Code Cracking Pressure Order Bodies Separately

Solenoid
Valves
A 8:1 Omit for no setting (Standard)*
B 3:1 Specify setting if required LB10
H 1.75 : 1 *Standard valve is set to crack at 215 Bar
(3120 PSI). Valve to be set to 1.3 times Line Body Porting Body PV
J 5:1
Proportional
maximum load induced pressure. Material Valves

Code Adjustment Style / Kit No. Code Seals / Kit No. Code Porting
Z Screw Adjust (Standard) N Nitrile, Buna-N (Std.) / 039 3/4″ BSP (main) 1/4″ BSP (aux)
T Tamper Resistant (TC1125) (SK30008N-1) 069 1″ SAE (main) 1/4″ SAE (aux) CE
Electronics

V Fluorocarbon / 034 3/4″ BSP Dual Cavity

(SK30008V-1)
Coils &

234 3/4″ SAE Dual Cavity

Code Body Material BC

A Aluminum
Bodies &
Cavities

S Steel

TD
Technical
Data

LM22 Parker Hannifin Corporation

Hydraulic Cartridge Systems