Samsung Monitor P2270HD
Samsung Monitor P2270HD
Samsung Monitor P2270HD
LCD TV Monitor
User Manual
TROUBLESHOOTING
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
MORE INFORMATION
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Correct Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Caution CautionIndicates cases where the function may not work or the setting may be canceled.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written
permission of Samsung Electronics, Co., Ltd.
The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
The ENERGY STAR logo is the registered trademark of the U.S. Environmental Protection Agency.
As a partner of ENERGY STAR, Samsung Electronics, Co., Ltd. admits that this product satisfies the ENERGY STAR
specifications for energy saving.
When installing the product with a stand When installing the product with a wall-mount
Warning Failing to follow the precautions marked with this sign may result in a serious injury or even a
fatality.
Failing to follow the precautions marked with this sign may result in a personal injury or property
Caution
damage.
Meaning of Signs
Power Related
The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power cord or plug Avoid connecting multiple electric appli-
or a loose power outlet. ances to a single wall outlet.
• Otherwise, it may result in electric shock • Otherwise, it may result in fire due to
or fire. overheating of the wall outlet.
Avoid plugging in or unplugging the power Plug the power plug in firmly.
supply with wet hands.
• Otherwise, it may result in fire.
• Otherwise, it may result in electric
shock.
Make sure to connect the power cord to a Avoid bending or twisting the power cord
grounded wall outlet (for insulation class 1 excessively and avoid placing heavy objects
equipment only). on the cord.
• Otherwise, it may result in electric shock • Otherwise, it may result in electric shock
or injury. or fire due to a damaged power cord.
Keep the power cord and the product away If the pins of the power plug or the wall out-
from a heater. let are covered in dust, clean it using a dry
cloth.
• Otherwise, it may result in electric shock
or fire. • Otherwise, it may result in fire.
Avoid unplugging the power plug while the Make sure to use only the power cord sup-
product is operating. plied by our company. In addition, do not use
the power cord of another electric appliance.
• Otherwise, it may damage the product
due to electric shock. • Otherwise, it may result in electric shock
or fire.
When unplugging the power plug from the Connect the power plug to a wall outlet that
wall outlet, make sure to hold it by the plug can be easily reached.
and not by the cord.
• When a problem occurs with the product,
• Otherwise, it may result in electric shock you must unplug the power plug to cut
or fire. the power off completely. You cannot cut
the power off completely using only the
power button on the product.
Installation Related
Warning
• Otherwise, it may result in fire due to • Otherwise, it may result in fire due to
internal over-heating. internal over-heating.
Keep the plastic bags used to pack the Avoid installing the product in a location that
product away from children. is unstable or exposed to excessive vibra-
tion such as on an unstable or slanted shelf.
• If children place the plastic bags over
their heads, they may suffocate. • The product may fall and this may result
in damage to the product or injury.
• If you use the product in a location
exposed to excessive vibrations, it may
result in a problem with the product or
fire.
Avoid installing the product in a location Avoid installing the product in a location
exposed to dust, moisture (sauna), oil, exposed to direct sunlight and installing the
smoke or water (rain drops) and installing it product near a heat source such as a fire-
within a vehicle. place or heater.
• This may result in electric shock or fire. • This may shorten the product life cycle
or cause fire.
Caution
Do not let the product drop while moving it. Do not place the product face down on the
floor.
• This may result in a problem with the
product or injury. • This may damage the panel of the
product.
When installing the product on a console or When putting the product down, handle it
shelf, make sure that the front of the product gently.
does not protrude out of the console or
• Otherwise, it may result in a problem
shelf.
with the product or injury.
• Otherwise, this may cause the product
to fall off and result in a malfunction or
injury.
• Make sure to use a cabinet or shelf
suitable to the size of the product.
If the product is installed in a location where
the operating conditions vary considerably,
a serious quality problem may occur due to
the surrounding environment. In this case,
install the product only after consulting one
of our service engineers about the matter.
Cleaning Related
Warning
Before cleaning the product, unplug the When cleaning the product, do not spray
power cord. water directly over the product parts.
• Otherwise, it may result in electric shock • Make sure that water does not enter the
or fire. product.
• Otherwise, it may result in fire, electric
shock or a problem with the product.
Avoid spraying cleansing agent directly onto When cleaning the product, disconnect the
the product. power cord and clean the product with the
supplied cleaning cloth.
• This may result in discoloration or
cracking of the exterior of the product or • Avoid using chemicals such as wax,
the panel coming off. benzene, alcohol, thinner, mosquito-
repellent, fragrance, lubrication or
cleansing agent when cleaning the
product.
This may result in the exterior being
deformed or the print being removed.
If you can't get the product clean with just Since the exterior of the product is easily
the supplied cloth, use a soft, damp cloth scratched, be sure to use the supplied
with a "monitor-exclusive cleansing agent" cleansing cloth.
and wipe the product with it.
Usage Related
Warning
Since a high voltage runs through the prod- To move the product, turn the power off and
uct, never disassemble, repair or modify the unplug the power cord, the antenna cable
product yourself. and any other wires connected to the prod-
uct.
• Otherwise, it may result in fire or electric
shock. • Otherwise, it may result in electric shock
• If the product needs to be fixed, contact or fire due to the damaged power cord.
a service center.
If the product generates a strange noise, a Avoid letting children hang or climb onto the
burning smell, or smoke, unplug the power product.
plug immediately and contact a service cen-
• Otherwise, it may result in the product
ter.
falling and this may result in injury or
• Otherwise, it may result in electric shock death.
or fire.
If you drop the product or the case is dam- Avoid placing objects such as toys and
aged, turn the power off and unplug the cookies on top of the product.
power cord. Contact a service center.
• If a child hangs over the product to grab
• Otherwise, it may result in fire or electric an object, the object or the product may
shock. fall and this may result in injury or even
death.
When thunder or lighting occurs, unplug the Avoid dropping an object over the product
power cord and under no circumstance or cause impact to the product.
touch the antenna cable as this is danger-
• Otherwise, it may result in electric shock
ous.
or fire.
• Otherwise, it may result in electric shock
or fire.
Caution
Displaying a still image for a long time may When not using the product for a long time
create a persistent image or stain on the such as leaving your home, unplug the
screen. power cord from the wall outlet.
• If you do not use the product for a long • Otherwise, it may cause dust
time, use the power-saving mode or set accumulation and result in fire caused
the screensaver to the moving picture by overheating or short circuit or result in
mode. an electric shock.
Set the appropriate resolution and fre- Avoid turning the product upside down or
quency for the product. move the product holding only the stand.
• Otherwise, it may result in eye strain. • This may cause the product to fall,
resulting in damage to the product or
injury.
Watching the product from too close a dis- Avoid using a humidifier or cooker near the
tance continuously may damage your eye- product.
sight.
• Otherwise, it may result in electric shock
or fire.
It is important to give your eyes some rest (5 Since the display panel is hot after using it
minutes every hour) when viewing the prod- for a long time, do not touch the product.
uct screen for long periods of time.
• Otherwise, it may result in a problem • Having the sound too loud may damage
with the product or injury. your hearing.
Be careful that children do not place the bat- When replacing the batteries, insert them
teries in their mouths when removed from with right polarity (+, -).
the remote control. Place the battery in a
• Otherwise, the battery may become
location that children or infants cannot
damaged or it may cause fire, personal
reach.
injury or damage due to leakage of the
• If children have had the battery in their internal liquid.
mouths, consult your doctor
immediately.
Use only specified standard batteries. Do The batteries (and rechargeable batteries)
not use new and used batteries together. are not ordinary refuse and must be
returned for recycling purposes. The cus-
• This may cause a battery to break or
tomer is responsible for returning the used
leak and may cause fire, injury, or
or rechargeable batteries for recycling.
contamination (damage).
• The customer can return used or
rechargeable batteries to a nearby
public recycling center or to a store
selling the same type of the battery or
rechargeable battery.
• Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the product at a later stage.
CONTENTS
SOLD SEPARATELY
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Insert the Stand Connector into the Stand Base in the direction shown by the figure.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the
cloth face down.
- Caution
Do not lift the product holding only the stand
Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards.
Place a soft cloth over the table to protect the product and place the product face down.
Hold the main body of the product with your hand as shown by the figure.
Pull the stand in the direction of the arrow as shown in the figure to separate it.
Turn the connecting screw at the bottom of the stand to separate it.
Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as
shown in the figure.
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down.
3. Remove the screw from the stand and separate the stand.
4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,
wall mount stand or another stand) and firmly fix the stand by fastening the screw.
•If you use screws that are longer than the standard specifications, the inside of the product may be damaged.
•For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ
depending on the corresponding specifications.
•Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using
excessive force.
This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any
damage or injury.
•Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible
with the specifications or due to an installation not performed by an authorized installation engineer.
•When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of space
from the wall.
•Use the wall mount according to the international specifications.
1. Connect the product to a PC depending on the video output supported by the PC.
2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
3. Connect one end of the power cord to the [ POWER ] port of the product and connect the other end of the power cord to the
110V or 220V wall outlet.
(The input voltage is switched automatically.)
You may view television programs on the monitor if it is connected to an antenna or cable/satellite system without installing any
separate TV reception hardware or software on your computer.
1. Connect the cable/satellite or TV antenna cable to the [ANT IN] port on the rear side of the monitor.
• When using an indoor antenna/cable/satellite terminal:
Check the antenna terminal on the wall and then connect the antenna/cable/satellite TV cable.
• When using an outdoor antenna:
When using an outdoor antenna, we strongly suggest using a qualified technician to install it.
2. When the connections are completed, connect the TV power.
3. When the product is turned on for the first time after it was purchased, the initial setup operations (<Plug&Play>) begin.
Be careful that the coaxial cable is not bent when connecting it to the antenna input terminal [ANT IN].
Connect the HDMI OUT port of the AV device (Blu-Ray/DVD/Cable/Satellite box) to the [HDMI IN] terminal of the monitor using
the HDMI cable.
Press the [SOURCE] button at the front of the monitor or on the remote control to select <HDMI> mode.
You do not need to make a separate audio connection when connecting via HDMI.
1. Connect the DVI output terminal of an external device to the [HDMI IN] terminal of the monitor using a DVI to HDMI cable.
2. Connect the red and white plugs of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital
output device, and connect the opposite plug to the [HDMI/PC/DVI-D AUDIO IN] terminal of the product.
Press the [SOURCE] button at the front of the monitor or on the remote control to select <HDMI> mode.
1. Connect the VIDEO OUT port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [PR, PB, Y]] input ports
using a component video cable [PR, PB,Y].
2. Connect the audio port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [R-AUDIO-L]] port of the
monitor.
Press the [SOURCE] button at the front of the monitor or on the remote control to select the <Component> mode.
1. Connect the EXT(RGB) port of the monitor to the DVD Player using a SCART jack.
2. When a Scart device is connected to your monitor, the Source automatically changes to EXT.
• Connect to the DVD Devices input if the device has a [EXT [RGB]] jack.
• You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on.
1. Insert the CI CARD into the CAM in the direction of the arrow until it fits.
2. Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
3. Check if you can see a picture on a scrambled signal channel.
• When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
• The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact your service provider.
• When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating
that the channel list is now updated.
• You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with
your hands since dropping the CI CARD may cause damage to it.
• Insert the CI-Card in the direction marked on it.
• CAM is not supported in some countries and regions, check with your authorized dealer.
Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the optical input of your amplifier using an optical
cable.
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information,
refer to the User Manual supplied with the locking device. You have to purchase the locking device separately.
1. Insert the locking part of the locking device into the hole of the Kensington lock of the product ( ) and turn it in the locking
direction ( ).
2. Connect the Kensington lock cable.
3. Tie the Kensington lock cable to a desk or heavy object.
You can purchase the locking device from an electronics store or an online shop.
When the TV is initially powered on, basic settings proceed automatically and subsequently.
2. Press the [ ] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [ ] button to confirm your
choice.
3. Press the ◄ or ► button to select <Store Demo> or <Home Use>, then the [ ] button.
• We recommend setting the TV to <Home Use> mode for the best picture in your home environment.
• <Store Demo> mode is only intended for use in retail environments. If the unit is accidentally set to <Store Demo>
mode and you want to return to <Home Use> (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.
4. Press the button. Select the appropriate country by pressing the ▲ or ▼ button. Press the [ ] button to confirm your
choice.
5. Press the ▲ or ▼ button to select <Air> or <Cable>, then press the [ ] button.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the [ ] button to select <Start>.
• When setting the antenna source to <Cable>, a step appears allowing you to set a value for the digital channel
search. For more information, refer to <Channel> → <Auto Store>.
• <Digital & Analogue>: Digital and Analogue channels.
• <Digital>: Digital and Analogue channels.
• <Analogue>: Analogue channels.
• The channel search will start and end automatically.
• Press the [ ] button at any time to interrupt the memorization process.
• After all the available channels are stored, the message Set the <Clock Mode> is displayed.
1. Press the [MENU] button to display the menu. Press the ▲ or ▼ button to select <Setup>, then press the [ ] button.
2. Press the [ ] button again to select <Plug & Play>.
ICON DESCRIPTION
[ -/+ ] Moves from one menu item to another horizontally or adjusts selected menu values.
Adjusts the audio volume.
[▲/▼] Use these buttons to navigate the menu or to adjust a value in the OSD.
Press to change the channel.
TV
POWER
Selects the TV mode directly.
Turns the product On/Off.
Number Buttons PRE-CH
Press to change the channel. This button is used to return to
the immediately previous chan-
nel.
MUTE
Activates a highlighted menu item. Adjusts the audio volume.
+ - P
MENU FAV.CH
INFO SUBT.
, , , , , , , ,
Make sure to match the +and - ends of the batteries with the diagram inside the compartment.
Remove the batteries and store them in a cool, dry place if you won‘t be using the remote control for a long time.
If the remote control doesn‘t work, check the following :
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?
Most television stations provide written information services via Teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can select various options to suit your requirements by using the
remote control buttons.
For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing
or some pages may not be displayed.
You can change teletext pages by pressing the numeric buttons on the remote control.
(store) (mode)
Used to store the teletext pages. Press to select the teletext mode
(LIST/FLOF). If you press it in the
LIST mode, it switches into the
List save mode. In the List save
mode, you can save teletext
page into list using the 8(store)
button.
(size) (hold)
Press to display the double-size let- Used to hold the display on a
ters in the upper half of the screen. given page if the selected page is
For lower half of the screen, press it linked with several secondary
again. To display normal screen, pages which follow on automati-
press it once again. cally. To resume, press it again.
(reveal) (cancel)
Used to display the hidden text Used to display the broadcast
(answers to quiz games, for exam- when searching for a page.
ple). To display normal screen,
press it again.
Colour buttons (red / green / yel-
(teletext on/mix)
low / blue)
Press to activate teletext mode after
If the FASTEXT system is used
selecting the channel providing the
by a broadcasting company, the
teletext service. Press it twice to
different topics covered on a tele-
overlap the teletext with the current
text page are colour-coded and
broadcasting screen.
can be selected by pressing the
coloured buttons.
Press one of them corresponding
to the required. The page is dis-
played with other coloured infor-
mation that can be selected in the
same way. To display the previ-
ous or next page, press the cor-
responding coloured button.
(sub-page)
Used to display the available sub-
page.
Channel Country Auto Store Manual Store Cable Search Now & Next
Option Guide
Full Guide Default Guide Channel List Channel Mode Fine Tune
Setup Plug & Play Language Time Game Mode Child Lock
Common Inter-
face
Available Modes
The icons below represent the input signals that are displayed when selecting an item in the Source List.
Indicates the signal when <PC> or <DVI> is selected in the <Source List >.
This is the PC video signal that is connected to and input through the [PC] or [DVI] terminals.
Indicates the signal when <Ext.> is selected in the <Source List >.
This is the video signal input through the [Ext.] terminal.
Indicates the signal when <HDMI> is selected in the <Source List >.
This is the signal input through the [HDMI] terminal.
Indicates the signal when <TV> is selected in the <Source List >.
This is the signal input through the [ANT IN] terminal.
Indicates the signal when <Component> is selected in the <Source List >.
This is the signal input through the [COMPONENT] terminal.
The default setting may be different depending on the selected Input Mode (input signal source selected in External Input
List) and the selected resolution
MENU DESCRIPTION
MagicBright <MagicBright> is a feature providing an optimum viewing environment depending on the contents of
the image you are watching. Currently five different modes are available: <Entertain>, <Internet>,
<Text>, <Dynamic Contrast> and <Custom>. Each mode has its own pre-configured brightness
value.
• <Entertain>
High Brightness
For watching motion pictures such as a Blu-Ray or DVD.
• <Internet>
For working with a mixture of images such as texts and graphics.
• <Text>
For documents or work involving heavy text.
• <Dynamic Contrast>
<Dynamic Contrast> automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
• <Custom>
Although the values are carefully chosen by our engineers, the pre-configured values may not be
comfortable to your eyes depending on your taste.
If this is the case, adjust the Brightness and Contrast by using the OSD menu.
Press the [TOOLS] button to display the Tools menu. You can also set the MagicBright by select-
ing <Tools> → <MagicBright>.
Contrast / Brightness / You can use the on-screen menus to change the contrast and brightness according to personal pref-
Sharpness erence.
Auto Adjustment The values of <Fine>, <Coarse> and <Position> are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
Press the [TOOLS] button to display the Tools menu. You can also set the auto adjustment by
selecting <Tools> → <Auto Adjustment>.
Screen • <Coarse>
Removes noise such as vertical stripes.
<Coarse> adjustment may move the screen image area. You may relocate it to the center using
the horizontal control menu
• <Fine>
Removes noise such as horizontal stripes.
If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency (Coarse).
• <PC Position>
Adjusts the screen location horizontally and vertically.
• <Image Reset>
Image parameters are replaced with the factory default values.
Picture Reset Picture parameters are replaced with the factory default values.
Mode You can select the type of picture which best corresponds to your viewing requirements.
You can activate either <Dynamic>, <Standard>, or <Movie>.
• <Dynamic>
Selects the picture for high-definition in a bright room.
• <Standard>
Selects the picture for optimum display in a normal environment.
• <Movie>
Selects the picture for viewing movies in a dark room.
Press the [TOOLS] button to display the Tools menu. You can also set the picture mode by
selecting <Tools> → <Picture Mode>.
Backlight / Contrast / Your product has several setting options that allow you to control the picture quality.
Brightness / Sharp-
• <Backlight > - Adjusts the brightness of LCD back light.
ness / Colour / Tint (G/
R) • <Contrast> - Adjusts the contrast level of the picture.
• <Brightness> - Adjusts the brightness level of the picture.
• <Sharpness> - Adjusts the edge definition of the picture.
• <Colour> - Adjusts color saturation of the picture.
• <Tint (G/R)> - Adjusts the color tint of the picture.
Advanced Settings Samsung‘s new TVs allow you to make even more precise picture settings than previous models.
See below to adjust detailed picture settings.
• <Black Tone> - You can select the level on the screen to adjust the screen depth.
• <Off> - <Dark> - <Darker> - <Darkest>
• <Dynamic Contrast> -You can adjust the screen contrast so that the optimal contrast is provided.
• <Off> - <Low> - <Medium> - <High>
• <Gamma> - You can adjust the Primary Colour (Red, Green, Blue) Intensity.
• <Colour Space> - <Colour Space> is a color matrix composed of red, green and blue colors.
Select your Favourite <Colour Space> to experience the most natural color.
• <Auto> - <Native>
• <White Balance> - You can adjust the color temperature for more natural picture colors.
• <R-Offset> - <G-Offset> - <B-Offset> - <R-Gain> - <G-Gain> -<B-Gain> - <Reset>
• <Flesh Tone> - You can emphasize the pink <Flesh Tone> in the picture.
• <Size>
You can switch the Size.
• <Auto Wide> - Automatically adjusts the picture size to the "16:9" aspect ratio.
• <16:9> - Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
• <Wide Zoom> - Magnify the size of the picture more than 4:3.
• <Zoom> - Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
• <4:3> - This is the default setting for a video movie or normal broadcasting.
• <Screen Fit> - Use the function to see the original image with no cut-off with HDMI (720p/ 1080i
/ 1080p) or Component (1080i / 1080p) signals are input.
• Depending on the input source, the picture size options may vary.
• The items available may differ depending on the selected mode.
• Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
• <Wide Zoom>: Press the ► button to Select Position, then press the [ ] button. Press
the ▲ or ▼ button to move the picture up/down. Then press the [ ] button.
• <Zoom>: Press the ► button to Select Position, then press the [ ] button. Press the ▲
or ▼ button to move the picture up and down. Then press the [ ] button. Press the ►
button to Select Size, then press the [ ] button. Press the ▲ or ▼ button to magnify or
reduce the picture size in the vertical direction. Then press the [ ] button.
• After selecting <Screen Fit> in HDMI (1080i) or Component (1080i) mode: Select Position
by pressing the ◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture.
• <Reset> : Press the ◄ or ► button to select Reset, then press the [ ] button. You can
initialize the setting.
• If you use the <Screen Fit> function with HDMI 720p input, 1 line will be cut at the top,
bottom, left and right as in the Overscan function.
• <Screen Mode>
Digital Noise Reduction.
Only when setting the picture size to Auto Wide can the user determine the Screen mode. Each
individual European country requires a different picture size so this function is intended to help
users to select it.
• <16:9> - Sets the picture to 16:9 wide mode.
• <Wide Zoom> - Magnify the size of the picture more than 4:3.
• <Zoom> - Magnify the size of the picture vertically.
• <4:3> - Sets the picture to 4:3 normal mode.
• <Digital NR>
Digital Noise Reduction.
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
• <Off> - <Low> - <Medium> - <High> - <Auto>
• <HDMI Black Level>
When a DVD or set-top box is connected to your TV via <HDMI>, it may cause a degradation in the
screen quality, such as an increase in the black level, a low contrast, or discoloration, etc.,
depending on the external device connected. In this case, adjust the screen quality of your TV by
configuring the <HDMI Black Level>.
This function is active only when the external device is connected via <HDMI>.
• <Normal> - <Low>
• <Film Mode>
The <Film Mode> feature offers you a theater-quality viewing experience.
• <Off> - <Auto>
<Film Mode> is supported in <TV>, <Component> (480i / 1080i) and <HDMI>(480i / 1080i)
Picture Reset Picture parameters are replaced with the factory default values.
Sound
Mode • <Standard>
Choose Standard for the standard factory settings.
• <Music>
Choose Music when watching music videos or concerts.
• <Movie>
Choose Movie when viewing movies.
• <Clear Voice >
Emphasizes voice over other sounds.
• <Custom >
Choose Custom if you want to adjust the settings according to personal preference .
Press the [TOOLS] button to display the Tools menu. You can also set the sound mode by select-
ing <Tools> → <Sound Mode>.
Equalizer You can adjust the left and right sound balance and equalizer settings as required.
• <Mode>
You can select a sound mode to suit your personal preferences.
• <Balance>
You can adjust the left and right sound balance and equalizer settings as required.
• <100Hz> - <300Hz> - <1KHz> - <3KHz> - <10KHz>
To adjust the level of different bandwidth frequencies.
• <Reset>
Resets the equalizer settings to the default values.
SRS TruSurround HD <SRS TruSurround HD> is a patented SRS technology that solves the problem of playing 5.1 multi-
channel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker play-
back system, including internal television speakers. It is fully compatible with all multichannel formats.
• <Off> - <On>
Press the [TOOLS] button to display the Tools menu. You can also set the picture mode by
selecting <Tools> → <SRS TruSurround HD>.
Audio Lanugage You can change the default value for audio languages. Displays the language information for the
incoming stream.
Audio Format When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur
due to the decoding speed difference between the main speaker and the audio receiver. In this case,
use the TV Speaker function.
Audio Description This is an auxiliary audio function that provides an additional audio track for visually challenged per-
sons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along
with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control
the volume.
• <Audio Description>
Turn the audio description function on or off.
• <Volume>
You can adjust the audio description volume.
• Volume is active when Audio Description is set to On.
• <Off> - <On>
Speaker Select If you want to hear the sound through separate speakers, cancel the internal amplifier.
• If you select <External Speaker> in the <Speaker Select> menu, the sound settings will be
limited.
• The volume and [MUTE] buttons do not operate when the <Speaker Select> is set to
<External Speaker>. Please set the volume on your Home theater.
Sound Reset You can restore the Sound settings to the factory defaults.
Channel
Country Select the country in which the product is being used before you use the Auto Store feature. If you do
not see your country in the list, select others.
• <Digital Channel>
You can change the country for digital channels.
• <Analogue Channel>
You can change the country for analogue channels.
The PIN number input screen appears. Enter your 4 digit PIN number.
Auto Store You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers.
If a channel is locked using the Child Lock function, the PIN input window appears.
• <Air / Cable>
Antenna source to memorize.
<Air / Cable>
• <Digital & Analogue>
Digital and Analogue channels.
• <Digital >
Digital channels.
• <Analogue >
Analogue channels.
When selecting Cable → Digital & Analogue or Cable → Digital : Provide a value to scan for
cable channels.
• <Search Mode>
Full / Network / Quick
Quick
• <Network ID>
Displays the network identification code.
• <Frequency>
Displays the frequency for the channel. (Differs in each country)
• <Modulation>
Displays available modulation values.
• <Symbol Rate>
Displays available symbol rates.
Scans for all channels with active broadcast stations and stores them in the TV`s memory.
Manual Store You can scan the frequency ranges available on your television in your area and store all the chan-
nels found manually.
• <Digital Channel>
Manual store for digital channels.
• <Channel>
Set the Channel number using the ▲,▼ or number (0~9) buttons
• <Frequency>
Set the frequency using the number buttons.
• <Bandwidth>
Set the bandwidth using the ▲,▼ or number (0~9) buttons.
• <Analogue Channel>
Manual store for analogue channel.
• <Programme> (Programme number to be assigned to a channel)
Inputting the appropriate program number on the screen. Sets the programme number using
the ▲,▼ or number (0~9) buttons
• <Colour System>
Adjusts repeatedly until the colour is of the best quality. Sets the colour system value using
the ▲ or ▼ button.
• <Auto>-<PAL>-<SECAM>-<NTSC4.43>
• <Sound System>
Adjusts repeatedly until the sound is of the best quality. Sets the sound system value using
the ▲ or ▼ button.
• <BG>-<DK>-<I>-<L>
• <Channel> (When you know the number of the channel to be stored)
You can store television channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found. The Programme number of each stored
channel which you wish to identify
• <C> (Air channel mode)
You can select a channel by entering the assigned number to each air broadcasting
station in this mode.
• <S> (Cable channel mode)
You can select a channel by entering the assigned number for each cable channel in this
mode.
• <Search> (When you do not know the channel numbers)
Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first
channel or the channel that you selected is received on your screen.
• <Store> (When you store the channel and associated programme number)
It's used to restore the number user inputs. Set to OK by pressing the [ ] button.
Cable Search Option Using this function, you can manually add the channel range to be scanned by full search mode of
(depending on the the Auto Store function.
country) • <Freq.Start~Stop>
Displays the frequency for the channel.
• <Modulation >
Displays available modulation values.
• <Symbol Rate>
Displays available symbol rates.
Now & Next Guide / The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme
Full Guide / Default entries may appear blank or out of date as a result of the information broadcast on a given channel.
Guide The display will dynamically update as soon as new information becomes available.
You can also display the guide menu simply by pressing the [GUIDE] button. (To configure the
<Default Guide>, refer to the descriptions.).
• The programme title is on the upper part of the screen center. Please click on INFO
button for the detailed information. Channel Number, Running Time, Status Bar,
Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext,
Languages of Subtitle or Teletext, and brief summary of the highlighted programme are
included on the detailed information.
• “... “ will be appeared if the summary is long.
• Six channels are displayed. To scroll between channels, move to a channel using the ▲
or ▼ button.
• <Default Guide>
You can decide whether to display either the Now & Next Guide or the Full Guide when the
GUIDE button on the remote control is pressed.
• <Now & Next> - <Full Guide>
Channel List Using this menu, you can Add / Delete or set Favourite channels and use the program guide for digi-
tal broadcasts.
You can select these options by simply pressing the [CH LIST] button on the remote control.
Press the [TOOLS] button to display the Tools menu. You can also set the add to (or delete
from) Favourite by selecting [Tools] → <Add to Favourite> (or <Delete from Favourite>).
To select the Favourites channels you have set up, press the [FAV.CH] button on the
remote control.
• : An analogue channel.
• : A locked channel.
• : A reserved program.
Channel Mode When press the P[ / ] button, channels will be switched within the selected channel list.
• <Added Ch.>
Channels will be switched within the memorized channel list.
• <Favourite Ch.>
Channels will be switched within the favourite channel list.
Fine Tune Use fine tuning to manually adjust a particular channel for optimal reception.
• If you do not store the fine-tuned channel in memory, adjustments are not saved.
• Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand
side of the channel number in the channel banner.
• To reset the fine tuning setting, press the ▼ button to select Reset, then press the [ ]
button.
• Only Analog TV channels can be fine tuned.
MENU DESCRIPTION
Plug & Play This brings up the menu items that appeared when you first plugged in the TV.
Language The language chosen affects only the language of the OSD.
Time • <Clock>
Setting the clock is necessary in order to use the various timer features of the TV.
• <Clock Mode>
You can set up the current time manually or automatically.
• <Auto> - <Manual>
• Depending on the broadcast station and signal, the auto time may not be set
correctly. If this occurs, set the time manually.
• The Antenna or cable must be connected in order to set the time automatically.
• <Clock Set>
You can set the current time manually.
• The current time will appear every time you press the [INFO] button.
• If you disconnect the power cord, you have to set the clock again.
• <Sleep Timer>
The sleep timer automatically shuts off the TV after a preset time .
• <Off> - <30 min> - <60 min> - <90 min> - <120 min> - <150 min> - <180 min>
Press the [TOOLS] button to display the Tools menu. You can also set the sleep timer by
selecting <Tools> → <Sleep Timer>.
• <Channel>
Select the desired channel.
• <Repeat>
Select <Once>, <Everyday>, <Mon~Fri>, <Mon~Sat>, <Sat~Sun> or <Manual>.
• When <Manual> is selected, press the ► button to select the desired day of the
week. Press the [ ] button over the desired day and the ( ) mark will appear.
• You can set the <hour>, <minute> and channel by pressing the number buttons on
the remote control.
• Auto Power Off
When you set the timer On, the television will eventually turn off if no controls are
operated for 3 hours after the TV was turned on by the timer. This function is only
available in timer On mode and prevents overheating, which may occur if a TV is on
for too long time.
Game Mode When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting game menu.
• <Off> - <On>
Child Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable
programme by muting out video and audio.
• <Off>-<On>
• Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit
PIN number.
• The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting
<Change PIN> from the menu.
• You can lock some channels in <Channel List>.
• <Child Lock> is available only in TV mode.
Change PIN You can change your personal ID number that is required to set up the TV.
• Before the setup screen appears, the PIN number input screen appears. Enter your 4digit
PIN number.
• The default PIN number of a new TV set is 0-0-0-0.
• If you forget the PIN code, press the remote control buttons in the following sequence,
which resets the PIN to 0-0-0-0: [POWER] (Off) → [MUTE] → 8 → 2 → 4 → [POWER] (On).
Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable
programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user.
• <Allow All>
Press to unlock all TV ratings.
• <Block All>
Press to lock all TV ratings.
• Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit
PIN number.
• The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting
Change PIN from the menu.
Subtitle You can activate and deactivate the subtitles. Use this menu to set the <Mode>.
<Normal> under the menu is the basic subtitle and <Hard of hearing> is the subtitle for a hearing-
impaired person.
• <Subtitle>
Switches subtitles on or off.
• <Mode>
Sets the subtitle mode.
• Normal / Hard of hearing
• <Subtitle Language>
Set the subtitle language.
• If the programme you are watching does not support the <Hard of hearing> function,
<Normal> automatically activates even though <Hard of hearing> mode is selected.
• English is the default in cases where the selected language is unavailable in the broadcast.
• You can select these options simply by pressing the [SUBT]. button on the remote control.
Teletext Language You can set the Teletext language by selecting the language type.
English is the default in cases where the selected language is unavailable in the broadcast.
Preference Primary Audio Language / Secondary Audio Language / Primary Subtitle Language /Secondary Sub-
title Language / Primary Teletext Language /Secondary Teletext Language
Using this feature, users can select one of the languages. The language selected here is the default
when the user selects a channel.
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Lan-
guage of the Language menu are automatically changed to the selected language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a
list of languages supported by the current channel and the selection is highlighted.
If you change this language setting, the new selection is only valid for the current channel. The
changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Lan-
guage, or the Primary Teletext Language of the Preference menu.
Digital Text If the programme is broadcast with digital text, this feature is enabled.
Light Effect You can turn the LED on/off on the front of monitor. You can turn it off to save power.
• <Off>
Activates the <Light Effect> (LED) only when a button is pressed.
• <On>
Activates the <Light Effect> (LED) only while watching the TV.
Light Level Light Level is to automatically detect distribution of inputted visual signal and adjust to create opti-
mum brightness.
Melody A melody sound can be set to come on when the monitor is powered On or Off.
Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption. When watching
TV at night, set the <Energy Saving> mode option to <High> to reduce eye fatigue as well as power
consumption.
Input
MENU DESCRIPTION
Source List Use to select <PC>, <TV> or an external input source connected to the Monitor.Use to select the
screen of your choice.
You can use the [SOURCE] button on the remote control.
Edit Name Name the input device connected to the input jacks to make your input source selection easier.
<PC> - <DVI> - <Ext.> - <Component> - <HDMI>
Anynet+ (HDMI-CEC)
What is <Anynet+>?
<Anynet+> is a function that enables you to control all connected Samsung devices that
support <Anynet+> with your Samsung TV‘s remote. The <Anynet+ > system can be used only
with Samsung devices that have the <Anynet+> feature. To be sure your Samsung device
1. Connect the [HDMI IN] jack on the TV and the HDMI OUT jack of the corresponding <Anynet+> device using an HDMI
cable.
2. Connect the [HDMI IN] jack of the home theatre and the HDMI OUT jack of the corresponding <Anynet+> device using an
HDMI cable.
Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio Input
on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theatre‘s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
[DIGITAL AUDIO OUT (OPTICAL)] jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
Connect only one Home Theatre.
You can connect an <Anynet+> device using the HDMI 1.3 cable. Some HDMI cables may not support <Anynet+>
functions.
<Anynet+> works when the AV device supporting <Anynet+> is in the Standby or On status.
<Anynet+> supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.
Setting Up Anynet+
Press the [TOOLS] button to display the Tools menu. You can also display the <Anynet+> menu by selecting <Tools> →
<Anynet+ (HDMI-CEC)>
• <Anynet+ (HDMI-CEC)>
To use the <Anynet+> Function, <Anynet+ (HDMI-CEC)> must be set to On.
When the <Anynet+ (HDMI-CEC) >function is disabled, all the< Anynet+> related operations are deactivated.
The active source on the TV remote must be set to TV to use the <Anynet+> function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an
external device is still recording, it may or may not turn off.
Device List
1. Press the [TOOLS] button. Press the [ ] button to select <Anynet+ (HDMI-CEC)>.
2. Press the or button to select <Device List>, then press the [ ] button.
- If you cannot find a device you want, press the red button to scan for devices.
3. Press the or button to select a particular device and press the [ ] button. It is switched to the selected device.
- <Anynet+ (HDMI-CEC)> must be set to On in the <Application> menu for the <Device List> menu to appear.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices
connected to the TV may not always be automatically displayed in the device list. Press the red button to search for the
connected device.
If you have selected external input mode by pressing the [SOURCE] button, you cannot use the <Anynet+> function.
Make sure to switch to an <Anynet+> device by using the <Device List>.
• If you hear no sound from the TV‘s speakers, before performing the sound test, make
sure <Speaker Select > is set to <TV speaker> in the <Sound> menu.
• The melody will be heard during the test even if <Speaker Select> is set to <External
Speaker> or the sound is muted by pressing the [MUTE] button.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to
increase the signal strength. Continue to adjust the antenna until you find the best position
with the strongest signal.
HD Connection Guide This menu presents the connection method that provides the optimal quality for the HDTV. Refer to
this information when connecting external devices to the TV.
Contact Samsung View this information when your TV does not work properly or when you want to upgrade the soft-
ware. You can view the information regarding the call center, product and software file download
method.
4. Complete the remaining installation steps according to the instructions displayed on the screen.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information,
refer to the document about the Windows operating system.
An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent
characteristics of the panel, unlike a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
HORIZONTAL VERTICAL
PIXEL CLOCK SYNC POLARITY
DISPLAY MODE FREQUENCY FREQUENCY
(MHZ) (H/V)
(KHZ) (HZ)
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely
match the colors of printed pictures. For more information, refer to the online help of the software (F1).
Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
What is MultiScreen ?
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MultiScreen setup file on the CD-ROM.
• The software may not work properly if you do not restart the computer after the installation.
• The MultiScreen icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
Operating System
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista
Hardware
• At least 32MB of memory
• At least 60MB of free space on the hard disk drive
Select MultiScreen from the program list and click the [Add/Delete] button.
• You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform
the self-diagnosis function according to the procedures below.
5-1 Troubleshooting
More user manuals on ManualsBase.com
5-2 Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely
connected and tightened.
(Refer to Connecting to a Computer)
Screen is blank and power indicator is off. Ensure that the power cord is firmly connected and the LCD monitor is on.
(Refer to Connecting to a Computer)
"Check Signal Cable” message Ensure that the signal cable is firmly connected to the PC or video sources.
(Refer to Connecting to a Computer)
"Not Optimum Mode" message Check the maximum resolution and the frequency of the video adapter.
Compare these values with the data in the Preset Timing Modes Chart.
Picture rolls vertically. Check if the signal cable is securely connected.Connect it again securely.
(Refer to Connecting to a Computer)
Image is not clear. Picture is blurred. Run Frequency <Coarse > and < Fine> tuning.
Turn on again after removing all accessories(video extension cable, etc.)
Set resolution and frequency to the recommended ranges.
Picture image is unstable and vibrates. Check if the resolution and frequency set for the computer video card falls
in the range supported by the monitor. If not, reset them referring to the
Ghost images are shown in the picture.
current <Information> under the monitor menu and Preset Timing Modes.
The image is too light or too dark Adjust the Brightness and Contrast
(Refer to the <Brightness>, <Contrast>)
Screen is blank and the power indicator light The monitor is using its power management system
blinks every 0.5 or 1 seconds Press a key on the keyboard
The screen is blank and is blinking. If you see the TEST GOOD message on the screen when you press the [
MENU] button, check the cable connection between the monitor and the
computer to ensure that the connector is properly connected.
No sound Ensure that the audio cable is firmly connected to both the audio-in port on
your monitor and the audio-out port on your sound card.
(Refer to Connecting to a Computer)
Check the volume level.
The remote control buttons do not respond. Check the battery polarities (+/-).
Check if the batteries have been exhausted.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the vicinity
Troubleshooting 5-2
More user manuals on ManualsBase.com
NOTE ON THE PRODUCT APPEARANCE
You may see small particles if you look closely at This is part of the product's design and is not a defect.
the edge of the bezel surrounding the screen.
5-2 Troubleshooting
More user manuals on ManualsBase.com
5-3 FAQ
How can I change the frequency of the video sig- You have to change the frequency of the graphics card.
nal? (For more information, refer to the User Manual of the computer or the
graphics card.)
How can I change the resolution? Windows XP: Change the resolution by selecting Control Panel → Appear-
ance and Themes → Display → Settings.
Windows ME/2000 : Change the resolution by selecting Control Panel →
Appearance and Themes → Display → Settings.
(For more information, refer to the User Manual of the computer or the
graphics card.)
How can I use the power saving function? Windows XP: Configure it by selecting Control Panel → Appearance and
Themes → Display → Screen Saver Settingor configure it in the BIOS
SETUP of the computer.
Windows ME/2000 : Configure it by selecting Control Panel → Appearance
and Themes → Display → Screen Saver Settingor configure it in the BIOS
SETUP of the computer.
For more information, refer to the Windows user manual for the computer.
How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth,
using either a plain water.
Do not leave any detergent or scratches on the case.
Do not let any water enter the monitor.
What is the difference between HDTV and There are various types of digital TVs.
SDTV? The most widely known types of digital TV are HDTV and SDTV. They are
classified according to the screen quality and the video specifications.
Can I watch HD broadcasting with all digital You can receive all digital broadcasts, whether they are SD or HD, using
TVs? any digital TV. However, you cannot enjoy HD programs, which are the
highest quality digital TV programs, using an SD digital TV.
(At present, all digital TVs from Samsung Electronics have the 16:9 wide
aspect ratio.)
Can I use my present antenna to receive digital As for existing analog TV, digital TV is designed so that digital broadcast-
broadcasting? ing signals are received via both indoor and outdoor antennas.
If signal reception is very good in your environment, you can watch digital
broadcasts with your existing indoor antenna. If not, it is better to install an
outdoor antenna.
Troubleshooting 5-3
More user manuals on ManualsBase.com
6 More Information
6-1 Specifications
LCD Panel Screen Size 21.53 inch (54 cm) 23 inches (58 cm)
Display Area 476.64 mm (H) X 268.11 mm (V)(18.77 509.76 mm (H) X 286.74 mm (V)(20.07
inches X 10.56 inches) inches X 11.29 inches)
Color 16.7M
Dimension (Width x Height x Depth) / 520 x 373.5 x 86.5 mm ( 20.5 x 14.7 x 571 x 364.6 x 65.5 mm ( 22.5 x 14.4 x
Weight 3.4 inch) (Without Stand) 2.6 inches) (Without Stand)
520 x 441.5 x 215 mm (20.5 x 17.4 x 571 x 432.5 x 189.5 mm (22.5 x 17 x 7.5
8.5) inch (With Stand) / 5.8 kg ( 12.8 inches) (With Stand) / 5.8 kg ( 12.8 Ibs)
Ibs)
This product provides a power saving function that automatically turns the screen off when the product is not used for a
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a
different color to indicate that the product is in power saving mode.
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key
or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides
the power saving function.
POWER SAVING FUNCTION NORMAL OPERATION POWER SAVING MODE POWER OFF (POWER BUTTON)
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
LATIN AMERICA
EUROPE
CIS
KYRGYZSTAN 00-800-500-55-500
TADJIKISTAN 8-10-800-500-55-500
ASIA PACIFIC
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their work-
ing life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be dis-
posed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg,
Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the envi-
ronment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
The rechargeable battery incorporated in this product is not user replaceable. For information on its
replacement, please contact your service provider.