Bid Number: GEM/2022/B/2433385

Dated: 11-08-2022

Bid Document

Bid Details

Bid End Date/Time 02-09-2022 14:00:00

Bid Opening Date/Time 02-09-2022 14:30:00

Bid Offer Validity (From End Date) 120 (Days)

Ministry/State Name Ministry Of Railways

Department Name Na

Organisation Name N/a

Office Name Southern Railway

Total Quantity 1

Item Category DIGITAL MOBILE XRAY UNIT (Q3)

Minimum Average Annual Turnover of the

50 Lakh (s)
bidder (For 3 Years)

OEM Average Turnover (Last 3 Years) 50 Lakh (s)

Years of Past Experience Required for

3 Year (s)
same/similar service

MSE Exemption for Years of Experience and

No
Turnover

Startup Exemption for Years of Experience

No
and Turnover

Experience Criteria,Past Performance,Bidder Turnover,OEM

Authorization Certificate,OEM Annual Turnover,Additional
Doc 1 (Requested in ATC),Additional Doc 2 (Requested in
ATC)
Document required from seller
*In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Past Performance 20 %

Bid to RA enabled No

Comprehensive Maintenance Charges

Yes
Required

Time allowed for Technical Clarifications

3 Days
during technical evaluation

Inspection Required (By Empanelled

Inspection Authority / Agencies pre- No
registered with GeM)

Evaluation Method Total value wise evaluation

EMD Detail

1/6
 Advisory Bank State Bank of India

EMD Percentage(%) 2.00

EMD Amount 190000

ePBG Detail

Advisory Bank State Bank of India

ePBG Percentage(%) 3.00

Duration of ePBG required (Months). 39

(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy.

(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable.

Beneficiary:
Dy.CMM/C/PER
Southern Railway, NA, N/A, Ministry of Railways
(Srinivasan M R)

Splitting

Bid splitting not applied.

MII Purchase Preference

MII Purchase Preference Yes

MSE Purchase Preference

MSE Purchase Preference Yes

1. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
2. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU / Public Listed Company for number of Financial years as indicated above
in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the Financial year. In case of bunch bids, the category of
primary product having highest value should meet this criterion.
3. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,

2/6
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
4. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .In case
Buyer has selected Purchase preference to Micro and Small Enterprises clause in the bid, the same will get
precedence over this clause.
5. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15%
(Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall be
given opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage of
total QUANTITY.
6. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 20% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.

DIGITAL MOBILE XRAY UNIT ( 1 set )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively)

Brand Type Unbranded

Technical Specifications

Buyer Specification Document Download

Comprehensive Maintenance

Warranty of required product 3 Year

Comprehensive Maintenance Duration (Post

5 Year
Warranty)

*Warranty displayed under the AMC/CMC Details section will supersede the warranty displayed under the catalog
specfication

3/6
Installation Commissioning and Testing (ICT) details for the above item:

% of Product Cost Payable on Product Delivery 80%

Min Cost Allocation for ICT as a % of product cost 20%

Number of days allowed for ICT after site readiness

20 Days
communication to seller

Consignees/Reporting Officer and Quantity

Consignee/Reporti
S.No. Address Quantity Delivery Days
ng Officer

600023,Office of the Medical

Director Southern Railway
1 Sivakami M 1 90
Headquarters Hospital
Perambur Chennai-600023

Buyer Added Bid Specific Terms and Conditions

1. Scope of Supply

Scope of supply (Bid price to include all cost components) : Supply Installation Testing and
Commissioning of Goods

2. Purchase Preference (Centre)

Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated
23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent
Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference,
the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary
evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. If
L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of margin of purchase
preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1
price and contract will be awarded for percentage of 25% of total value.

3. Buyer Added Bid Specific ATC

Buyer Added text based ATC clauses

1. Essetial certification : a. Radiation safety certificate — offered model must have a valid AERB Type
approved certificate at the time of submission of tender. b. Quality certificate: Entire unit must be USA FDA
/ CE approved or BIS certified and copy of the certificates should be enclosed with the offer.

2. CLAUSE WISE COMPLIANCE STATEMENT FOR THE SPECIFICATION ENCLOSED OR PRODUCT CATALOGUE
FOR MAKE & MODEL OFFERED SHOULD BE SUBMITTED BY THE TENDERER SPELLING OUT DEVIATIONS, IF
ANY, TO ASCERTAIN TECHNICAL SUITABILITY. AN OFFER, WHOSE TECHNICAL SUITABILITY CANNOT BE
ASCERTAINED, MAY BE PLACED OUT OF CONSIDERATION.

4/6
Disclaimer
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on the
bidding process, its outcome, and consequences thereof including any eccentricity/restriction arising in the
bidding process due to these ATCs and due to modification of technical specifications and/or terms and
conditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample,
incorporating any clause against the MSME policy and Preference to make in India Policy, mandating any Brand
names or Foreign Certification, changing the default time period for Acceptance of material or payment timeline
governed by OM of Department of Expenditure shall be null and void and would not be considered part of bid.
Further any reference of conditions published on any external site or reference to external documents/clauses
shall also be null and void. If any seller has any objection/grievance against these additional clauses or
otherwise on any aspect of this bid, they can raise their representation against the same by using the
Representation window provided in the bid details field in Seller dashboard after logging in as a seller within 4
days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not be
allowed to open bids if he fails to reply to such representations. Also, GeM does not permit collection of Tender
fee / Auction fee in case of Bids / Forward Auction as the case may be. Any stipulation by the Buyer seeking
payment of Tender Fee / Auction fee through ATC clauses would be treated as null and void.

Additional Clause For Comprehensive Maintenance Charges

1.CMC shall include preventive maintenance including calibration as per technical/ service /operational manual of
the manufacturer, service charges and spares, after satisfactory completion of Warranty. During the CMC period
commencing from date of the successful completion of warranty period, Service personnel shall visit each
consignee site as recommended in the manufacturer’s technical/ service /operational manual, at least once in six
months or as per user requirement. Cost of consumables shall not be included in CMC.Further there will be 98%
uptime warranty during CMC period on 24 (hrs) X 7 (days) X 365 (days) basis, with penalty, to extend CMC period
by double the downtime period.
2.CMC charges to be indicated as percentage of cost of equipment quoted for each year after the warranty
period.
3.GST shall be included in the CMC Charges quoted.
4.Cost of CMC will be added for Ranking/Evaluation purpose with depreciation formula.A 10% discounting rate
per year shall be applied on CMC Charges for price evaluation on Net Present Value.
5.The payment of CMC will be made on quarterly basis after satisfactory completion of said period, duly certified
by end user.
6.While creating a bid or RA, buyers shall indicate whether CMC is required against Yes/No” options. If CMC
Charges are included, an option for number of years for CMC required after the warranty period shall be
available.Under this option up to 10 years can be chosen for CMC charges beyond warranty period.
7.In case the bid has a provision for CMC, the warranty of the product will also be deemed to have been
converted into Comprehensive warranty including preventive maintenance and calibration as per technical/
service /operational manual of the manufacturer, service charges and spares, during the Warranty Period also.
Sellers are therefore advised to include the cost of Comprehensive Warranty including spares (excluding
consumables) also in product Cost.
8.The CMC functionality shall be available in bid only and no direct RA shall be applicable.In case of bid to R/A
decrement rules shall be applicable on total price inclusive of CMC charges. Bunching of products shall not be
available while creating bids with CMC charges.

8.1.Buyer shall indicate number of years of warranty by selecting different options available in the field
depending on warranty parameter applicable in category parameters for the equipment. No. of years of
warranty indicated here shall supersede the warranty period indicated elsewhere in bid or product
specifications. The Seller while participating in Bid/RA will get fields to indicate CMC charges as
percentage depending on number of years of CMC selected by Buyer. The following shall be applicable, if
5 year CMC selected:
CMC charges for 1st year after warranty period– Percentage to be indicated- A1
CMC charges for 2nd year after warranty period– Percentage to be indicated- A2
CMC charges for 3rd year after warranty period – Percentage to be indicated- A3
CMC charges for 4th year after warranty period – Percentage to be indicated- A4
CMC charges for 5th year after warranty period – Percentage to be indicated- A5
Similarly, A6 to A10 are to be indicated for 6th to 10th year of CMC if applicable.
8.2.The calculation of CMC Charges shall take into account the number of years of warranty and duration

5/6
 of CMC as specified while creating bid.
8.3.In the price evaluation, the system shall provide function to calculate the cost of each equipment by
formula indicated below includingCMC and then show the inter-se-ranking of the bidders. The following are
the variables
(i) Number of years for which CMC required.
(ii) Number of years of product warranty
The formula for calculating total cost including CMC charges shall be as under:
Total Cost for evaluation=
C+C*{(A1/100)/(1.10^n)+(A2/100)/(1.10^n+1)+(A3/100)/(1.10^n+2)+(A4/100)/(1.10^n+3)+
(A5/100)/(1.10^n+4)} and so on
C – Cost for equipment quoted and n shall be number of years of product warranty specified.
If 2 year warranty specified, n shall be2 and if 5 year warranty specified, n shall be 5. A1,A2, A3, A4&
A5shall depend on how many years CMC selected. For3 yearCMC, only A1,A2 and A3 factors are to be
taken into account and A4 and A5 will not be applicable.
8.4.CMC charges offered for each subsequent year should be same or higher than preceding year.
8.5.The CMC charges shall be offered within range of 3 to 10% of cost of equipment.

9.Since CMC charges are to be paid only later for each year during CMC period,applicable performance
guarantee amount after placement of contract shall be based on the cost of equipment excluding the cost of
CMC Charges.
10.Performance bank guarantee applicable for CMC is to be submitted at start of the CMC and shall be applicable
between 2.5% to 5% as specified in bid on total CMC Charges.The PBG submitted after award of contract shall be
released only after new PBG for the CMC period is submitted and accepted by buyer/consignee after due
verification.Bank guarantee for CMC is to remain valid till completion of CMC period plus one year. The bank
guarantee for CMC shall be submitted to buyer directly. In case, seller fails to submit the PBG or does not provide
services for the CMC contract after expiry of warranty period then PBG of equipment shall be forfeited.
11.In case of splitting of order quantity, equipment cost and CMC charges offered by L1 bidder shall be matched
by higher quoting eligible bidders on one-to-one basis.The equipment cost and CMC charges (year to year) shall
be matched individually.
12.The CMC Contract shall be an offline contract to be handled by buyer.The payment of CMC will be made on
quarterly basis after satisfactory completion of said period, duly certified by end user and scope of CMC will be as
per para 1 above.
13.CMC Charges are inclusive of all the charges for Transportation, Lodging, Boarding, all insurances including
third party insurance and all other incidental charges. The same shall include GST. The prices also include cost of
spares and damaged parts. Purchaser does not have any liability, whatsoever, over and above the cost of CMC. It
also includes for arranging hand tools & tackles, special tools etc. required to carry out the work.

This Bid is also governed by the General Terms and Conditions

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws.

---Thank You---

6/6