Nothing Special   »   [go: up one dir, main page]

English (UK)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Product Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources
Supplier's name or trade mark: Kingfisher Int. Prod. B.V.
Supplier's address: Product quality, Kingfisher International Products B.V. Rapenburgerstraat 175E
1011 VM Amsterdam The Netherlands
Model identifier: 5057741317473
Type of light source:
Lighting technology used: LED Non-directional or NDLS
directional:
Light source cap-type Wire
(or other electric interface) connect,220-240V~
50/60Hz
Mains or non-mains: MLS Connected light No
source (CLS):
Colour-tuneable light source: No Envelope: -
High luminance light source: No
Anti-glare shield: No Dimmable: No
Product parameters
Parameter Value Parameter Value
General product parameters:
Energy consumption in on- 37 Energy efficiency F
mode (kWh/1000 h), rounded class
up to the nearest integer
Useful luminous flux (ɸuse), 4 000 in Correlated colour 4 000
indicating if it refers to the flux Sphere (360°) temperature,
in a sphere (360º), in a wide rounded to the
cone (120º) or in a narrow cone nearest 100 K,
(90º) or the range of
correlated colour
temperatures,
rounded to the
nearest 100 K, that
can be set
On-mode power (Pon), 37,0 Standby power (Psb), 0,00
expressed in W expressed in W
and rounded to the
second decimal
Networked standby power (Pnet) - Colour rendering 80
for CLS, expressed in W and index, rounded to
rounded to the second decimal the nearest integer,
or the range of CRI-
values that can be
set

Page 1 / 3
Outer Height 595 Spectral power See image
dimensions Width 595 distribution in the in last page
without Depth 30 range 250 nm to 800
separate nm, at full-load
control gear,
lighting
control parts
and non-
lighting
control parts,
if any
(millimetre)
Claim of equivalent power(a) - If yes, equivalent -
power (W)
Chromaticity 0,380
coordinates (x and y) 0,380
Parameters for LED and OLED light sources:
R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,96
Parameters for LED and OLED mains light sources:
displacement factor (cos φ1) 0,00 Colour consistency 0
in McAdam ellipses
Claims that an LED light -(b) If yes then -
source replaces a fluorescent replacement claim
light source without integrated (W)
ballast of a particular wattage.
Flicker metric (Pst LM) 0,0 Stroboscopic effect 0,0
metric (SVM)
(a)'-' : not applicable;
(b)'-' : not applicable;

Page 2 / 3
Page 3 / 3

You might also like