IV.1.12.01 Discharge Pressure Switch
IV.1.12.01 Discharge Pressure Switch
IV.1.12.01 Discharge Pressure Switch
DATA SHEET
IMPULSE VALVE DISCHARGE PRESSURE Specifications
SWITCH Part Number 02‐12534
Temperature
32 to 130°F (0 to 54°C)
Limits
Enclosure
NEMA 4
Classification
Single pole, double throw
Contact Rating 5A resistive/3A inductive @ 30 VDC
Normally open or normally closed
Body Material Aluminum with irridite finish
Description Pressure
1/4” (6 mm) NPT
Connection
The discharge pressure switch (DPS) is used to
Approximate 4.125” (105 mm)
provide a positive confirmation to the control system
Length (including both connectors)
that the Fike fire suppression system has been
Electrical
discharged manually via the strike button on the 1/2” (15 mm) NPT
Connection
Impulse Valve Operator (IVO). In response, the
(3) 18 gauge x 20" (508 mm) long
control panel will activate various audio/visual Wire Leads
Violet (C), Blue (NO), Black (NC)
warning devices and auxiliary relays to notify
Pressure Setting 40 psig (3 bar), increasing
occupants that the system has been discharged.
Weight 6.5 ounces (184 g)
The switch is mounted to the discharge piping and is
operated pneumatically using the agent pressure in Approvals
the discharge piping network.
Underwriters Laboratories (UL)
Underwriters Laboratories of Canada (ULC)
Factory Mutual (FM)
For exact certification listings, please reference the respective
agency web site.
This document is only intended to be a guideline and is not applicable to all situations.
Information is subject to Fike’s full disclaimer at http://www.fike.com/disclaimer.
Form No. IV.1.12.01‐3 ● 02/19 ISO 9001:2015 Certified Page 1 of 1