Nothing Special   »   [go: up one dir, main page]

Amb4519R0V06 2Mx-690-960-33-18.5I-M-R Easyret Dual-Beam Antenna With 2 Integrated Rcus - 2.0M

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

AMB4519R0v06

2MX-690-960-33-18.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs - 2.0m

Antenna Specifications
Electrical Properties
690 – 960 (r/rr)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable,
at mid Tilt 16.6 18.0 18.2 18.3
Gain (dBi)
over all Tilts 16.5 ±0.5 17.8 ±0.4 18.0 ±0.3 18.2 ±0.3
Side lobe suppression for first side
> 16 > 17 > 18 > 18
lobe above main beam (dB)
Horizontal 3dB beam width (°) 39 ±3 37 ±3 36 ±2 34 ±2
Vertical 3dB beam width (°) 10.0 ±0.5 9.2 ±0.3 8.9 ±0.3 8.3 ±0.3
VSWR < 1.5
Horizontal beam centers (°) ± 30 ± 28 ± 27 ± 25
Cross polar isolation (dB) Same beam: ≥ 22 Same beam: ≥ 26
Beam to beam isolation (dB) ≥18 (758 - 788MHz & 791-821MHz & 869-894MHz ≥ 25; 925 - 960MHz ≥ 21)
Front to back ratio, ±30° (dB) > 25 > 26 > 26 > 26
Cross polar ratio at boresight (dB) > 17 > 22 > 23 > 23
Max. effective power per port (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet in XML format is available.

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2090 x 590 x 169 106
Packing dimensions (H x W x D) (mm) 2350 x 705 x 275
Antenna weight (kg) 36.1
Clamps weight (kg) 6.3 (2 units)

(726)
Antenna packing weight (kg) 49.6 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
2090
1267

Frontal: 1330 (at 150 km/h)


Wind load (N) Lateral: 190 (at 150 km/h)
Maximum: 1330 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 4 x 4.3-10 Female
Connector position Bottom

Accessories
97

Item Model Description Weight Units per antenna


Unit: mm
Mechanical downtilt:
Downtilt kit ASMDT0H01 3.1 kg 1 (Separate packing)
0 - 12 °

252
Product Product
List Category
AMB4519R0v06
2MX-690-960-33-18.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs - 2.0m

Antenna Information Management Module (AIMM) Specifications


Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 3 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s) Typ.30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

HWxxxx…….r
r rr

HWxxxx……rr

r - Red

Pattern sample for reference

690 - 960 MHz 690 - 960 MHz


(rr-30) (r+30)

253
Product Product
List Category

You might also like