12 Machinery Catalog 10
12 Machinery Catalog 10
12 Machinery Catalog 10
HACKSAW MACHINE
Saw Size Features :
14” • Coolant System
• Hydraulic Feed Down
Cutting Cap. • Quick Clamping Vise
7” Hack Saw Machine Horizontal Hacksaw
Description
14 - 16In Machine 18In
Article No KW1500005 KW1500415
Specification
Motor (kW / V / Ph) 0.37 / 220 / 1 1.5 / 220 / 1
KW1500005
Cutting Capacity
- Round (mm) Ø160 Ø250
Saw Size - Square (mm) 160 X 160 220 X 220
18” Blade Size (mm (inch)) 350(14) x 25 x 1.25 450(18) x 40 x 2.25
Stroke Length (mm) 100 ~ 160 135
Cutting Cap.
10” Speed of Sawing Bow (Stroke / min ) 85 75, 90, 108
Oblique Saw (°) 45 45
Dimension (L x W x H) (mm) 940 x 330 x 700 1262 x 863 x 967
KW1500415 Weight (kg) 160 600
CIRCULAR SAW
Blade
10” Circular Saw Machine 250mm
Description
complete with Stand
Article No KW1500261
Specification
Motor (kW / V / Ph) 0.975 / 220 / 1
Features : Cutting Capacity
• Coolant System
- 0° Round (mm (inch)) Ø75 (3)
• Quick Clamping Vise
• Swivel Head - 0° Square (mm) 65 x 65
• Include Table Stand - 0° Rectangular (mm) 90 x 50
• Precission Cutting - 45° Round (mm (inch)) Ø65 (2.5)
- 45° Square (mm) 58 x 58
- 45° Rectangular (mm) 70 x 50
Blade Size (mm (inch)) Ø250(10) x Ø32
Disk Blade Speed (rpm) 42
Vise opening (mm) 100
Optional Accessories : Reduction Gear in An Oil Bath (Ratio) 1 : 33
Dimension (L x W x H) (mm) 900 x 800 x 800
Weight (kg) 85
BANDSAW MACHINE
Features :
• Chip brush and length stopper
• Pulley system
Cutting Cap. 5”
• Ridgid casting structure
• Adjustable blade guide for high accuracy and long blade lifetime
• Waterpan and castor wheel (KW1500052)
• Vertical application (KW1500055)
• Hydraulic feed down (KW1500052)
Vertical application • Quick clamping vise (KW1500052)
• Coolant system (KW1500052)
Cutting Cap. 8”
Model SH0503BA SH0808BA
Description Bandsaw Machine 5" Bandsaw Machine 8"
Article No KW1500055 KW1500052
Specification
KW1500055
Motor (kW / V / Ph) 0.25 / 220 / 1 0.55 / 220 / 1
Motor Coolant (W / V / Ph) - 53 / 220 / 1
Cutting Capacity
- 0° Round (mm (inch)) Ø128 (5) Ø200 (8)
- 0° Rectangular (mm) 115 x 150 178 x 305
- 45° Round (mm (inch)) Ø75 (3) Ø127 (5)
- 45° Rectangular (mm) 76 x 115 120 x 125
Blade Size (mm (inch)) 12.7 x 0.65 x 1635 19.05 x 0.8 x 2362
Saw Blade Speed (F.P.M) 65, 95, 165 81, 135, 203, 270
Dimension (L x W x H) (mm) 895 x 457 x 985 1270 x 460 x 1150
KW1500052 Weight (kg) 62 200
MACHINERY 203
BANDSAW MACHINE and VERTICAL METAL BANDSAW MACHINE
BANDSAW MACHINE
Cutting Cap. 16”
Cutting Cap. 9” Cutting Cap. 10”
204 MACHINERY
ELECTRIC BEVELLER, HOLE CUTTING DRILL and DRILL PRESS MACHINE
ELECTRIC BEVELLER
Included Accessories :
1. Drill Chuck With Key
2. Drill Chuck Arbor
3. Drift Key
4. Drill Chuck Safety Guard
Features :
1. On/Off Switch with Emergency Stop
2. Solid Casting
Benefit :
1. Smooth operation
2. Tilting Work Table
MACHINERY 205
DRILLING and TAPPING MACHINE
MINI RADIAL DRILLING
Features: Max. Drill
• Pulley System 32mm
• Cast Iron Base
• Rigid & Heavy Duty Operation
Description Mini Radial Drilling 32mm 1.5HP
Article No KW1500284
Specification
Motor (kW / V / Ph) 1.1 / 380 / 3
Max. Drilling Capacity (mm) 32
Diameter of Column (mm) 115
Spindle Stroke (mm) 130
Spindle Cross Travel (mm) 380
Standard accessories Distance Spindle Axis to Column Surface (mm) 460
Max. Distance Spindle Nose to Base (mm) 620
Spindle Taper (MT) MT3
Spindle Speed (rpm) 300 ~ 2600
Working Area of Base (mm) 550 x 500
Center Between T-Slot (mm) 102
T-Slot Size (mm) 16
Dimension (L x W x H) (mm) 580 x 900 x 1500
KW1500284 Weight (kg) 290
Standard Accessories :
• Tapping chuck
(KW1500869, KW1500870)
• Drill chuck
• Key chuck
• Arbor punch
Drilling Machine With Drilling Machine With Drilling and Tapping Drilling and Tapping Drilling and Tapping
Description Auto Feed Spindle Auto Feed Spindle Machine 16mm M12 Machine 16mm M16 Machine 25mm M24
16mm 25mm Auto Reverse Auto Reverse Auto Reverse
Article No KW1500941 KW1500942 KW1500868 KW1500869 KW1500870
Specification
Main Motor (kW / V / Ph) 0.75 / 380 / 3 1.5 / 380 / 3 0.75 / 380 / 3 0.75 / 380 / 3 1.5 / 380 / 3
Coolant Motor (W / V / Ph) - 40 / 380 / 3 - - 40 / 380 / 3
Max. Drilling Capacity (mm) 16 25 16 16 25
Max. Tapping Capacity - - M12 M16 M24
Diameter of Column (mm) 85 102 70 85 102
Spindle Stroke (mm) 100 130 100 93 130
Distance Spindle Axis to Column Surface (mm) 180 230 193 180 230
Max. Distance Spindle Nose to Table (mm) 425 680 340 425 620
Max. Distance Spindle Nose to Base (mm) 610 965 580 610 1095
Spindle Taper (MT) MT2 MT3 MT2 MT2 MT3
Spindle Speed (rpm) 290 ~ 2400 230 ~2160 320 ~ 2700 160 ~ 1820 160 ~ 1880
Spindle Speed Step 6 6 5 9 9
Working Area of Table (mm) 250 x 250 330 x 380 265 x 265 320 x 320 330 x 380
Center Between T-Slot Table (mm) 124 200 - - 200
T-Slot Table Size (mm) 14 14 - - 14
Working Area of Base (mm) 255 x 215 300 x 320 250 x 300 250 x 250 300 x 320
Center Between T-Slot Base (mm) 138 180 - - 178
T-Slot Base Size (mm) 14 14 - - 14
Dimension (L x W x H) (mm) 700 x 390 x 1040 460 x 880 x 1760 400 x 700 x 950 790 x 460 x 1140 460 x 880 x 1760
Weight (kg) 108 260 100 108 247
206 MACHINERY
MILLING, DRILLING AND TAPPING MACHINE
Milling, Drilling,
Milling, Drilling Machine Milling, Drilling, Milling, Drilling , Tapping
Description Tapping Machine 32mm
32mm With Stand Tapping Machine 32mm Machine 32mm,
With Stand
Article No KW1500010 KW1500046 KW1500047 KW1500260
Specification
Motor (kW / V / Ph) 1.5 / 380 / 3 1.5 / 380 / 3 1.1 / 380 / 3 1 / 380 / 3
Max. Drilling Capacity (mm) 32 32 32 32
Max. Tapping Capacity - M16 M16 M16
Max. Face Mill Capacity (mm) 76 76 76 100
Max. End Mill Capacity (mm) 20 20 20 20
Diameter of Column (mm) 115 115 115 115
Spindle Drive Pulley Pulley Pulley Gear Head
Swing (mm) 340 340 520 520
Spindle Stroke (mm) 130 130 130 130
Longitudinal Travel (mm) 430 430 340 340
Cross Travel (mm) 185 185 180 180
Spindle Speed Step 6 6 6 6
Distance Spindle Axis to Column Surface (mm) 200 200 205 170
Max. Distance Spindle Nose to Table (mm) 330 330 705 440
Max. Distance Spindle Nose to Base (mm) - - 1030 900
Spindle Taper MT3 MT3 MT3 MT3
Spindle Speed (rpm) 125 ~ 2500 125 ~ 2500 125 ~ 2500 50 ~ 1250
Working Area of Table (mm) 730 x 210 730 x 210 585 x 194 585 x 190
Center Between T-Slot Table (mm) 45 45 37 38
T-Slot Table Size (mm) 16 16 14 14
Working Area of Base (mm) - - 380 x 330 340 x 330
Center Between T-Slot Base (mm) - - 223 223
T-Slot Base Size (mm) - - 16 16
Dimension (L x W x H) (mm) 960 x 1120 x 1710 960 x 1120 x 1710 800 x 900 x 1700 1000 x 900 x 1900
Weight (kg) 270 270 270 310
MACHINERY 207
MILLING, DRILLING, TAPPING, and SLOTING MACHINE
DRILLING AND TAPPING MACHINE
10033527 :
• Milling 30mm
• Drilling 50mm Optional
• Horizontal Milling Accesories:
• Milling 25mm
• NT40 Spindle Tapper
• Drilling 50mm
• Tapping M33
• MT4 Spindle Tapper
Features :
• Heavy duty
• Clockwise & Counter
clockwise revolution
• Auto reverse spindle
• Vertical & Horizontal milling
function (10033527)
• Clockwise & Counter Horizontal Milling
clockwise revolution
• Gearbox configuration for
vertical spindle
• Pulley belt configuration for
horizontal spindle
• Left and right table swivel
(100033527)
KW1500256
10033527
Standard accesories for 10033527
Description Milling Drilling, Tapping 50mm Universal Milling Machine
Article No KW1500256 10033527
Specification
Main Motor (kW / V / Ph) 2.2 / 380 / 3 1.5 / 380 / 3
Coolant Motor (kW / V / Ph) 0.01 40
Max. Drilling Capacity (mm) 50 50
Max. Tapping Capacity M33 -
Max. Face Mill Capacity (mm) 100 100
Max. End Mill Capacity (mm) 25 30
Diameter of Column (mm) 160 -
Beam Travel (mm) - 500
Spindle Drive Gear Head Gear Head
Swing (mm) 700 400
Spindle Stroke (mm) 200 120
Longitudinal Travel (mm) 460 585
Cross Travel (mm) 280 200
Spindle Speed Step 6 8
Distance Spindle Axis to Column Surface (mm) 230 -
Max. Distance Spindle Nose to Table (mm) 690 500
Max. Distance Spindle Nose to Base (mm) 1300 -
Spindle Taper (MT) MT4 NT40
Spindle Speed (rpm) 50 ~1510 60 ~ 1350
Working Area of Table (mm) 820 x 240 1000 x 240
Center Between T-Slot Table (mm) 54 60
T-Slot Table Size (mm) 16 14
Working Area of Base (mm) 480 x 440 -
Center Between T-Slot Base (mm) 198 -
T-Slot Base Size (mm) 22 -
Dimension (L x W x H) (mm) 1964 x 1164 x 2324 2270 x 1500 x 2100
Weight (kg) 805 900
SLOTTING MACHINE
208 MACHINERY
BENCH LATHE MACHINE
Capacity
Capacity 360 x 1000mm
320 x 1000mm
KW1500979
KW1500486
Capacity
410 x 1000mm
Features :
• Pedal for breaking system
• Tailstok sleeve and handwheel with adjustable precission scale
• Safety switch in chuck guard
• Rigid casted gap bed structure (KW1500907)
Standard Accessories :
• 3 jaws chuck
• 4 jaws chuck
• Face plate
• Collant system
• Drill chuck
• Changeable gear set
• Steady rest
• Follow rest
• Dead center
KW1500907
MACHINERY 209
LATHE MACHINE
Features :
Capacity • Tailstok sleeve and handwheel with
600 x 1500mm adjustable precission scale
• Pedal for breaking system
Standard Accessories :
• 3 jaws chuck = 250mm
• 4 jaws chuck = 320mm
Precision Feedstop • Face plate = 440mm
with Micrometer
• Changeable gear set
• Steady rest
• Follow rest
• Dead center
Rapid Travel
Motor
Thread
Handle
KW1500943
210 MACHINERY
PRECISION DRILL GRINDER, SAW BLADE SHARPERNER and EDMILL GRINDER
PRECISION DRILL GRINDER
No3 :
ENDMILL GRINDER For cutting angle 6°
Adjust screw :
For dull or sharp Features :
• Simple setting
• Fast & constant invariable grinding
Checking stock : • Highly efficient
For Checking endmill
parallel with holder unit No1 : Standard Accessories :
For Endmill flat • ER-40 Collet (10008909)
No2 : slot angle 30° • ER-20 Collet (10020247)
For radial angle 20° • Holder square type (for 4 flute)
• Holder hex. type (for 3 flute)
• Holder parallel type (for 2 flute)
• Wrench
10020247
10008909
ER-20 Precision ER-40 Precision
Description Endmill Grinder Set Endmill Grinder Set
Tool holder : 4-13mm (10pcs) 12-25mm (6pcs)
Article No 10020247 10008909
2 Flute 3 Flute 4 Flute
Specification
No2 No3 Motor (kW / V / Ph) 0.4 / 220 / 1 1 / 220 / 1
20° 6° Motor Speed (rpm) 6000 4300
Ø4, Ø5, Ø6, Ø7, Ø8, Ø9,
Endmill Diameter (mm) Ø12, Ø16, Ø18, Ø20, Ø25
Ø10, Ø11, Ø12, Ø13
No1 Endmill Flat Slot Angle (°) 30° 30°
30° Second Radial Angle (°) 20° 20°
Cutting Angle (°) 6° 6°
- SDC 300 x 1
Grind Wheel SDC 150 x 1
- SDC 270 x 1
Dimension (L x W x H) (mm) 320 x 260 x 300 365 x 293 x 345
Parallel type Hex. type Square type
Weight (kg) 17 31
MACHINERY 211
GRAVER GRINDER, UNIVERSAL TOOL and CUTTER GRINDER
GRAVER GRINDER
Standard Accessories :
Features :
• Universally applicable by versatile slewing and setting options
• To grind stamps, twist drills, electrodes, lathe tools, centring tips, etc.
• Easy handling and operation
Features :
With Standard Accessories
Can Use to Grind :
• Shell Endmill
• Lathe Square Toolbit
Nb :
To grind other toolbit, check the
optional accessories below
10119251 10119252
Description Universal Cut and Tool Grinder Machine (1Motor) Universal Cut and Tool Grinder Machine (2Motor)
Article No 10119251 10119252
Specification
Motor 1 (kW / V / Ph) 0.55 / 380 / 3 0.55 / 380 / 3
Motor 2 (kW / V / Ph) - 0.08 / 380 / 3
Grinding Wheel Size (mm) 150 x 32 x 5 150 x 32 x 16
Grinding Wheel Speed (rpm) 2800 5000
Rotation Angel of Wheel Head (°) 360 360
Elevating Distance of Wheel Head (mm) 120 120
Area of Operating Table (mm) 130 x 550 130 x 680
Longitudinal Travel of The Operating Table (mm) 150 150
Horizontal Travel of The Operating Table (mm) 300 400
Taper of Spindle Head MT4 MT4
Height of Head Holder (mm) 135 135
Capacity of The Head and Back Holder (mm) - 450
Dimension (L x W x H) (mm) 740 x 630 x 670 700 x 700 x 700
Weight (kg) 160 209
Article No Description
KW1500769 KW1500770 KW1500769 50D End Mill Grinding Attachment
Use for: Use for: KW1500770 50E Universal R-Type End Mill Grinding Attachment
- Resharpening End Mill Cutter - Resharpening Ball Nose Cutter KW1500867 50K Multifunctional Cutter and Tools
- Resharpening Cutting Flute Edge - Resharpening Cutting Flute Edge KW0400083 MT4 ER32 Collet Chuck Kit 4-20(11)
and Center Cutting Edge. and Radius Cutting Edge. KW0400084 MT4 ER40 Collet Chuck Kit 4-26(15)
KW1500895 Collet System Ø 4mm F/KW15-770
KW1500861 Collet System Ø 6mm F/KW15-770
KW1500853 Collet System Ø 8mm F/KW15-770
KW1500862 Collet System Ø 10mm F/KW15-770
KW1500854 Collet System Ø 12mm F/KW15-770
Use for: KW1500855 Collet System Ø 16mm F/KW15-770
- Resharpening Multifunctional KW1500863 Collet System Ø 18mm F/KW15-770
KW1500867 Cutter and Tools KW1500856 Collet System Ø 20mm F/KW15-770
212 MACHINERY
CYLINDER HONING BORING MACHINE
Include Accessories:
Features :
KW1500050 :
• Auto Feed Boring
• Coolant System
Article No Description
KW1500533 Honing Grinder D Ass 23mm, (8ea Grinder 80 x 8 x 8mm)
KW1500534 Honing Grinder D Ass 25mm, (8ea Grinder 80 x 8 x 8mm)
KW1500535 Honing Grinder D Ass 25mm, (8ea Grinder 100 x 13 x 13mm)
KW1500536 Boring Cutter and Spring Set for KW15-50 and KW15-295
MACHINERY 213
HYDRAULIC PRESS and MANUAL PIPE BENDER
HYDRAULIC PRESS
Features :
• Durable hydraulic presses
• Gauge dial
• Heavy-duty welded
construction
Features:
• Plastic case packing
• Simple installation and easy to operated
• For 3/8" – 7/8" (Round), 3/4” and 1” (Square)
For Inch
3/8~7/8" Description Manual Pipe Bender 3/8 – 7/8 In
Article No KW1500520
Specification
Max Thickness (mm) 0.8 ~ 1.2
Max Bending Angel (°) 180
3/8 (50)
½ (60)
KW1500520 9/16 (70)
Dies Type (Radius) - Round (inch (mm))
5/8 (80)
¾ (90)
7/8 (110)
¾ (100)
Dies Type (Radius) - Square (inch (mm))
1 (110)
Dimension (L x W x H) (mm) 630 x 370 x 150
Weight (kg) 26
214 MACHINERY
HYDRAULIC PIPE BENDER
HYDRAULIC PIPE BENDER
Features :
• Cast iron dies included
(KW1500589 = 6ea)
(KW1500590 = 8ea)
(KW1500591 = 9ea) Capacity Capacity Capacity
• Bend diameter pipe up to 90° ½ ~ 2” ½ ~ 3” ½ ~ 4”
(KW1500589 = 6 diameter, 1/2~2")
(KW1500590 = 8 diameter, 1/2~3")
(KW1500591 = 9 diameter, 1/2~4")
• High performed Hydraulic jack
Features:
• 7 Precision cast iron dies included
• Bend 7 different diameter pipe or tube from ½ to 3” up to 90°
• High performed Hydraulic jack
MACHINERY 215
PIPE BENDER, BAR BENDER, and BAR CUTTER
DIGITAL PIPE BENDER
Features:
• Digital bending angle setting
• Digital display
• Tripod stand
Dies Included
Features:
• 6 Rolls Universal Bender
• Can be Used in Different Configuration
• Cast Iron Dies for Square and Round
Square Formers (mm) 16, 19, 22, 25, 30, 38, 40, 50
Max Thickness (mm) 0.5 ~ 2
Packing Size (L x W x H) (mm) 600 x 575 x 910
230mm
KW1500698 Weight (kg) 250
*Capacity based on carbon steel material
216 MACHINERY
BENDER and SANDER MACHINE
HYDRAULIC ROUND BENDING MACHINE
Capacity Size Min Dia.(mm)
80x25 600
40x10 500
120x25 600
50x10 400
50 600
20 400
80x40x7 500
40x40x5 400
Features :
80x40x7 400
• Steel welded construction frame
40x40x5 360
• Hydraulic motor
• Mobile control panel 100x50x6 600
• Top roll hydraulic moveable 50x40x5 500
• One standard combination roller 100x50x6 600
• Horizontal and vertical operation 50x40x5 500
70x6 500
Article No. 10105857
40x5 400
Hydraulic Round Bending
Description 70x6 600
Machine
40x5 500
Specification
Ø50 600
Dia. of roller (mm) 65 Ø20” 400
Power (kW) 2.25 70x70x3 900
Spindle speed (rpm) 9.3 30x30x3 500
Packing size (cm) 125x115x180 80x40x3 800
Weight (kg) 720 (nett) 50x30x2 500
Model HPB-RMX3
Article No. 10106068
Description Hyd Pipe Bender Expander Machine 1-3”
Specification
Motor (kW / V / Ph) 3.0 / 380 / 3 (50Hz)
Bending capacity 1.1/2” - 3” tube
Expand capacity 3” tube
Packing size (mm) 1800x860x1320
*specification based on carbon steel tube Weight (kg) 638
Features
• High efficiency, less dust and low noise.
• The abrasive band is convenient for
replacement and adjustment
• The angle of belt grinder head can be
adjusted up and down
• Equipped with a vibration-proof
protective device and has an optional
Features : vacuum cleaner.
• Portable rotary bender • Quick adjusting belt angle
up to 2” schedule 40 • High speed belt
pipe
• Standard dies 1”x3”,
1.1/2”x5”, 1.3/4”x6” Article No. 10005328
• Caster for easy mobility
• Easy to read Angle bend Description Belt Sander
*specification based on carbon steel tube
indicator Specification
Model HPB-RD-3 Motor (kW / V/ Ph ) 2.2 / 380 / 3
Article No. 10106047 Contact Wheel (mm) 200 x 75
Description Hydraulic Pipe Bender Machine 1-2” Flat contact size (mm) 395
Specification Belt size (mm) 2000 x 75
Motor (kW / V / Ph) 0.55 / 380 / 3 (50Hz) Belt speed (m/sec) 34
Bending capacity 1” - 2” (schedule 40 pipe) Overall Dimension (L x W x H) (mm) 1150 x 570 x 570
Packing size (mm) 1400 x 700 x 1160 Packing size (L x W x H) (mm) 1300 x 490 x 1105
Weight (kg) 111 Weight (kg) 75
MACHINERY 217
PIPE THREADING MACHINE and PRESSURE TEST PUMP
PIPE THREADING MACHINE
Features :
• Use in BSPT size
• Center lock chuck
Description Threading MCH 1/2 – 2” BSPT 750W 220V Threading MCH 1/2 – 3” BSPT 900W 220V Threading MCH 1/2 – 4” BSPT 1100W 220V
Article No 10083577 10083578 10083579
Specification
Threading capacity ½” - 2” ½” - 3” ½” - 4”
Motor (kW/V/Ph) 0.75 / 220 / 1 0.9 / 220 / 1 11 / 220 / 1
Speed (Rpm) 27 11 ; 24 10 ; 22
Dimension (mm) 610 x 450 x 1240 780 x 520 x 1270 910 x660 x 1300
Weight (kg) 86 130 160
Thread Dies 10083582 HSS Dies ½” - ¾” BSPT RT 10083585 HSS Dies ½” - ¾” BSPT CT 10083582 HSS Dies ½” – ¾”BSPT RT
10083586 HSS Dies 1” - 2” BSPT CT 10083583 HSS Dies 1” - 2”BSPT RT
10083583 HSS Dies 1” - 2” BSPT RT
RT Type CT Type 10083587 HSS Dies 2½” - 3” BSPT CT 10083584 HSS Dies 2 ½” – 4” BSPT CT
Die Head Die Head Quick-Opening ½” - 2” Die Head Self-Opening ½” - 2”
10083641 10083643
Die Head Self-Opening ½” - 2” T80 CT T100 RT
10083640
T50 RT Die Head Quick-Opening 2½” - 3” Die Head Self-Opening 2 ½” - 4”
10083642 10083644
T80 CT T100 CT
Cut Tip Blade
10083580 Cutting Blade T50 T80 10083580 Cutting Blade T50 T80 10083581 Cutting Blade T100
Description Pressure Test Pump Manual 5 Mpa Pressure Test Pump Manual 24 Mpa Pressure Test Pump 25 Mpa Electric 380V
Article No 10083588 KW1500240 KW1500241
Specification
Motor (kW / V / Ph) - - 1.5 / 380 / 3
Pressure (Mpa) 5 24 25
Flow Volume (ml) 45 20 40
Dimension Unit (L x W x H) (mm) 530 x 200 x 300 460 x 210 x 550 800 x 470 x 800
Dimension Tank (L x W x H) (mm) 530 x 200 x 120 400 x 200 x 280 740 x 360 x 330
N.W / G. W (kg) 7.2 / 7.7 10 / 12 30 / 40
218 MACHINERY
MANUAL SHEAR MACHINE
MULTI PURPOSE MANUAL SHEAR
Features:
• Cut various kind of curve
Article No KW1500403
Description Multi Purpose Manual Shear 1mm
Specification
Max. Capacity (mm) 1
Dimension (L x W x H) (mm) 320 x 240 x 340
Weight (kg) 2
*Capacity based on carbon steel material
METAL SHEAR
GUILLOTINE SHEAR
Features:
• Level arm with compensating spring
• Easy cutting accross the entire length
• Rigid cutter body
MACHINERY 219
SHEAR MACHINE
GUILLOTINE SHEAR
Max. Capacity
1 .5x 1000mm
Features:
• Continuous plate cutting
• Knives made of hardened tool steel
• Knife length 1000mm
• For plates up to 1.5 mm
Article No KW 1500513
Description Guilotine Shear 1.5 x 1000mm with Table
Specification
Bed Width (mm) 1000
Shearing Thickness (mm) 1.5
Dimension (L x W x H) (mm) 1550 x 1000 x 580
Weight (kg) 295
*Capacity based on carbon steel material
Features:
• Use for mild steel, aluminum, cooper, brass, plastic and leads
• High carbon and chrome steel blade
• Foot operation
Features:
Switch Power • Use for mild steel, aluminum, cooper, brass,
plastic and leads
• High carbon and chrome steel blade
• Electric operation
Adjustable back stopper
Article No KW1500901
Description Electric Shearing Machine 3.0 x 1300mm
Specification
Motor Power (kW / V / Ph) 3 / 380 / 3
Shearing Width (mm) 1300
Shearing Thickness (mm) 3
Back Gauge Range (mm) 350
Shearing Angle (°) 2
Max. Capacity
Number of Stroke (stroke / min) 20
3.0 x 1300mm
Packing Size (L x W x H) (mm) 2330 x 1360 x 1540
Weight (kg) 1400
220 MACHINERY
BENDER
COMPACT BENDER
Description KW1500519
Compact Bender 8 x 32.6 x 50mm
Features: Article No.
with Stand
• Use for mild steel
Specification
• Bending up to 200°
Max. Capacity
- Mild Steel (mm (inch)) 8 x 32 (5/16” x 1¼”), 6 x 50 (¼” x 2”)
Bending Angle (°) 0 – 200
Dimension (L x W x H) (mm) 880 x 260 x 260
Weight (kg) 24
UNIVERSAL BENDER
Article No. KW1500388
Description Universal Bender 100x12mm
Features:
• Easy and precise operation Specification
• Bending angle up to 120˚ Max. Capacity
• Wide supporting face
- Round Steel (mm) 18
ensuring safe and reliable
operation - Square Steel (mm) 16 x 16
• Bending angle of various - Cold (mm) 100 x 5
radius by changing and - Flat Steel
- Warm (mm) 100 x 15
turning
- Angle Steel (mm) 60 x 8
- Body (mm) 590 x 290 x 280
Dimension (L x W x H)
- with Handle (mm) 720 x 180 x 130
Weight (kg) 32
MACHINERY 221
BRAKE and FOLDING MACHINE
HAND BRAKE MACHINE
KW1500499
KW1500497
Features:
• With segment bending blade for the bending of box section
• Various width segment, shiftable setup
• With balanced hammer, it is easy to operate and easy to fold
FOLDING MACHINE
Features:
• The two Types both has the optional structure of air spring which can be installed into the arm
• Both the press blade and folding blade is segment structure
Article No. KW1500504
Description Folding Machine 2.0 x 1270mm
Specification
Bending Width (mm) 1270
Bending Thickness (mm) 2
Bending Angle (°) 0 – 135
Max. Clamping Bar Lift (mm) 48
Dimension (L x W x H) (mm) 1700 x 710 x 1270
Weight (kg) 385
*Capacity based on carbon steel material
222 MACHINERY
ROTARY MACHINE
ROTARY MACHINE
Include Accessories
DIES SET FOR KW1500526
Features:
• Equipped with five sets of rolls for wiring, crimping, single bead, ogee bead and bellow edging for
various operations
• Clamp-on offset base
• 50mm distance between shaft center
Features :
• Equipped with interchangeable rolls
• Powerfull motor driven, give you better natural handling by two
hands
MACHINERY 223
SLIP ROLL MACHINE
ELECTRIC SLIP ROLL MACHINE
KW1500508
KW1500509
KW1500915
Features:
• Asymetrical roll bending machine with 3 rolls
• High strength steel rolls
• Fixed top roller, adjustable lower and rear rollers
• Worm gear and motor for prebending
• Standard series wire core groove
• Hand feed
• Supplied with conical bending feature
224 MACHINERY
SHEAR, BRAKE and ROLL MACHINE
Max. Capacity
1.0 x 760mm
Max. Capacity
1.0 x 305mm
KW1500494 KW1500493
Max. Capacity
1.0 x 1320mm
For KW1500401
Shear
KW1500401 Brake
Features:
• Removable male dies with female dies
• Back gage standard equipment
• With 2 position handle
• Shears cuts mild steel or equivalent
• Press Brake - bends boxes, channels, angles and other complex job
• Sectional fingers allow box and pan works Roll
• Slip Roll-roll provided with forming grooves *Capacity based on carbon steel material
MACHINERY 225
PUNCHER and PIPE NOTCHER MACHINE
ARBOR PRESS and ROUND BENDER
Aplication:
• Assembling component
• Installation and dismantle of bearings, etc. KW1500956 Article No. KW1500955
Description Round Bender Machine 1/4”
Article No. KW1500956 KW1500957 Specification
Description Arbor Press 2T Arbor Press 3T Ring Size Range (inch) 1–3
Max. Capacity
Specification
- Round Steel (mm) 6
Pressure (Ton) 2 3
- Flat Steel (mm) 5 – 25
Opening Height (mm) 180 280 Handle (mm) 13
Dimension (L x W x H) (mm) 450 x 200 x 470 300 x 460 x 900 Dimension (L x W x H) (mm) 340 x 180 x 420
Weight (kg) 44 58 Weight (kg) 80
Features:
• For making round hole, deep-hole, square or similiar
stamps
• Easy quick stamps and stencil replacements
• Swing 160mm
Features: • Stamp 75 x 2
• For mild steel and plate • Stencil 34 x 34 x 16mm
• Heavy-duty blade
Optional :
• Stencil series (extra cost)
Article No. KW 1500389 • The metric system (mm) : 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15
Description Hand Notcher 1.6mm x 4ton • The imperial system (inch) : 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”
Specification
Article No. KW 1500516
Pressure (Ton) 4
Description Hand Puncher 8mm
Max. Thickness (mm) 1.6
Specification
Punches (mm) 152 x 152
Shearing Thickness (mm) 8
90º Angle (mm) 152 x 152
Max Throath (mm) 160
Ram Stroke (mm) 20
Punch Mold and Dies (mm) 55 x 34 x 18
Dimension (L x W x H) (mm) 500 x 460 x 390
Dimension (L x W x H) (mm) 800 x 460 x 160
Weight (kg) 385
Weight (kg) 80
*Capacity based on carbon steel material *Capacity based on carbon steel material
PIPE NOTCHER
Features:
• End mill design for fast metal
removal Ø 40 x 60mm
• Quick set up by V-block clamping
• Swivel vise for angle notching
Feature:
• For making round cutting with radial direction on pipes or tubes
Model PNX-2
Article No. 10106069
Article No. KW1500958 KW1500959
Description Electric Pipe Mill Notcher 1/2-2”
Manual Pipe Manual Pipe Notcher
Description Specification
Notcher ¾”, 1”, ¼” 1.5”, 2”
Specification Motor (kW / V / Ph) 1 / 220 / 1 (50Hz)
Capacity (inch) ¾, 1, 1¼ 1½, 2 Notch capacity 1/2” - 2”
Max Thickness (mm) 3 4 Speed (Rpm) 280
Dimension (L x W x H) (mm) 200 x 130 x 80 210 x 170 x 105 Packing size (mm) 1120 x 620 x 540
Weight (kg) 8 15 NW. / GW. (kg) 140 / 164
226 MACHINERY
WOOD PREPARATION MACHINE
SCROLL MACHINE
TABLE SAW
10
inch
Article No. 10063894
Description Table Saw 80 x 254 mm
Specification
Motor Power (V/Hz/W) 220/ 50/ 1500
Circular Saw Size Ø 254 (10 inch) 40T
Circular Saw Bore (mm) Ø 30
Circular Saw Speed (rpm) 4500
Max. Width Workpiece (to cut) (mm) 180
Max. Width Workpiece (to rip) (mm) 210
Max. Cutting 90º (mm) 80
Max. Cutting 45º (mm) 55
Features : Main Table Size (mm) 638 x 430
• Blade tilt up to 45° via
hand wheel Extention Table (Left / Right) (mm) 638 x 150
10063894
• Easy operation Blade Tilt (º) 45º - 90º
• For D.I.Y use
• Rip fance Dimension (mm) 800 x 850 x 900
• Mitre Gauge
Weight (kg) 62
• Safety blade cover
12
inch
MACHINERY 227
WOOD PREPARATION MACHINE
PANEL SAW MACHINE
12
inch
10051708
Features:
• Heavy duty panel saw Article No. 10051708
• Cutting of large panel up to 320cm Description Panel saw 12” 4 kW 3PH
• Include scoring saw Specification
• Blade tilt up to 45° Motor Power (V/Hz/W) 380/ 50/ 4000
• Digital display for blade angle
• Safety blade cover Motor Power (Scoring) (V/Hz/W) 380/ 50/ 750
• Rip fence Circular Saw Size (mm(”)) Ø300 (12”)
• Mitre gauge Circular Saw Bore (mm) Ø30
• Smooth sliding table Circular Saw Speed (rpm) 6000
• Include quick clamping system Scoring Saw Size (mm) 120
Scoring Saw Bore (mm) 20
Scoring Saw Speed (rpm) 8000
Max. Thickness Workpiece 90º (mm) 95
Max. Thickness Workpiece 45º (mm) 55
Sliding Table Size (mm) 3200
Blade Tilt (º) 45º - 90º
Dimension (mm) 3250 x 3150 x 900
Weight (kg) 550
Features:
• Safety switch in upper
and lower doors
• Include mitre gauge
and rip fence
• Tiliting table
10051709 10051710 10051711
228 MACHINERY
WOOD PREPARATION MACHINE
THICKNESSER
16
inch
Article No. 10051706
Description Thicknesser 16” x 18” 3kW 1PH
Specification
Motor (V/Hz/W) 220/ 50/ 3000
Max. Depth Cut (mm) 5
Table Size (mm) 410 x 750
Cutter Block Diameter (mm) 95
Cutter Block Speed (rpm) 4050
Cutting Knife (pcs) 4
Max. Thickness Workpiece (mm) 220
Features: Max. Width Workpiece (mm(”)) 410 (16”)
• Infeed and outfeed rollers to
smoothing planning Dimension (mm) 650 x 890 x 1020
• Cast iron body
10051706 Weight (kg) 230
• Heavy duty
CHISEL MORTISER
750W, 1ph
Article 10051714
Scale in both Two position Description Chisel Mortiser 750W 1PH
metric and depth stop
imperial system Specification
Motor (V/Hz/W) 220/ 50/ 750
Slot (mm) 6/ 15 / 26
Chuck Bore (mm) Ø16
Drill Chuck Capacity (mm) 3 - 16
Max. Mortising Depth (mm) 76
Chisel To Table (mm) 210
Ratchet setting Cabinet stand
handle Spindle Speed (rpm) 1400
MACHINERY 229
WOOD PREPARATION MACHINE
SINGLE HORIZONTAL DRILL
Article 10051713
Description Single Horizontal Drill 2.2kW 3PH
Specification
Motor (V/Hz/W) 380/ 50/ 2200
Max Chuck Size (mm) 16
Speed (rpm) 2800
Max. Height (mm) 110
Features: Max. Vertical Travel (mm) 175
• Made of cast iron body
• For heavy duty use Max Cross Travel (mm) 140
• 2 way rotation for curve shape Table Size (mm) 460 x 190
• Mitre gauge
Dimension (mm) 600 x 700 x 1050
note: Drill bit not include Weight (kg) 110
10051713
MINI LATHE
Article 10051715
Description Mini Lathe 12”x 18” 600W 1PH
Specification
Motor (V/Hz/W) 220/ 50/ 600
Max. Swing Over Bed (mm) 305
Max. Length (mm) 450
Features: Speed (rpm) 680,1000, 1430, 2000,2800
• Made of cast iron bed
• Compact design Dimension (mm) 800 x 350 x 450
10051715
• Include a gooseneck
Weight (kg) 38
work light
Article 10085498
Description Wood Copy Lathe 550W 1000mm
Specification
Motor (V / Hz / W) 220 / 50 / 550
Spindle speed (rpm) Variable Speed (50HZ) 500 – 2,000
Swing overbed (mm (Inch)) 350 (14)
Distance between center (mm (Inch)) 1000 (40)
Max duplicating length (mm (Inch)) 1000
Max cutting travel (mm) 85
Drive spindle 1" x 8TPI
Head and tailstock taper (mm) MT2
Tail Stock Spindle Travel (mm) 120
Face plate (mm (Inch)) 150 (6)
Tool rest (mm (Inch)) 300 (12)
Features :
• Duplicating device Dimension (mm) 1450 x 480 x 1220
• Variable speed
Weight (kg) 80
• Include stand
230 MACHINERY
WOOD PREPARATION MACHINE
OSCILATING SPINDLE SANDER
Features:
• Oscilating spindle
• Tilt table to 45°
• Compact design
• 3 sanders size include
Article 10051716
Description Oscilating Spindle Sander 370W 1PH
Specification
Motor (V/Hz/W) 220/ 50/ 370
Ø51 x 140
Spindle Size (mm) Ø38 x 140
Ø38 x 87
Oscilating Travel (mm) 24
Oscilating Per Minute (OPM) 60
Table Tilt (°) 0 - 45°
Table Size (mm) 370 x 370
Dimension (mm) 450 x 450 x 1040
10051716 Weight (kg) 33
DRUM SANDER
Features:
• Rubber feed mat
• Handle and wheel kit included for
easy moving unit
• in and out extension table Article 10051717
included Description Drum Sander 16” 1.5kW 1PH
• Easy access to the sanding drum
for abrasive belt changes Specification
Motor (V/Hz/W) 220/ 50/ 1500
Max. Sanding Width (mm) 405
Max. Workpiece Heigth (mm) 130
Maximum Sanding Depth (mm) 5
Drum Speed (rpm) 1440
Drum Size (mm) 132 x 410
Dust Port Diameter (mm) 100
Dimension (mm) 1030 x 1000 x 1030
SPINDLE MOULDER
Article 10051712
Description Spindle Moulder 2.8kW 3PH
Specification
Motor (V/Hz/W) 380/ 50/ 2800
Motor Protection Thermal link
Max Spindle Size (mm) Ø 200
Spindle Bore (mm) Ø 30
Speed (rpm) 1800 / 3000 / 6000 / 9000
Max Thickness Workpiece (mm) 100
Table Size (mm) 640 x 710
Sliding Table Size (mm) 480 x 500
Sliding Table Travel (mm) 530
MACHINERY 231
WOOD PREPARATION MACHINE
SPINDLE MOULDER ROUTER
Article 10121482
Speed Read Out Description Spindle Moulder Router 1500KW
Specification
Motor (W) 1500
Table Size (mm) 600 x 400
Sliding Table (mm) 1000 x 218
Table Height (mm) 800
Interchangeable 30mm +router bit
10121482 Spindle Diameter cutter spindle with 8mm + 12mm
Changeable Spindle or 1/4" + 1/2" two collet
Spindle Travel (mm) 110
Table Opening (mm) 170
Features:
• Alumuniun fence Tool Diameter Max (mm) 150
• Cast iron table Spindle Speed (rpm) 1400 / 4000 / 6000 / 8000
• Speed read out
• Changeable spindle Weight (kg) 100
Note: Spindle cutter not include
1 1,5 3
Additional With HP HP HP
floor sweeper
232 MACHINERY
WOOD PREPARATION MACHINE
DUST COLLECTOR MACHINE
5 7
HP HP Also available accesories for dust collector:
10084325 10084323
Cartridge Filter Cotton Bag
for Finnest Dust
MACHINERY 233
DIVIDING HEAD
SEMI UNIVERSAL DIVIDING HEAD
Accessories included : Dimension:
KW0400323
KW0400324, KW0400325
Accessories :
• Tailstock • Carrier Article No. A B C D E F G H L M N O P
• Change gear bracket • Hole plate KW0400321 162 14 102 87 186 95 116 100 93 54.7 30 100 100
• Change gears • Flange KW0400322 209 18 116 98 224 117 120 125 103 68.5 34.5 100 125
• Jack • 3-jaws chuck
• Center • Face plate (specially ordered)
234 MACHINERY
INDEXING SPACER
SIMPLE INDEXING SPACER
Dimension:
Accesories included :
Accessories
included: Features :
• Six mask plates • Designed for indexing both horizontal and vertical position
• 3-jaws chuck • It is most optimum in use for milling, drilling machine
• Three 6-square Article No. A B C D E F G H I J K
spanner KW0400326 310 255 Ø210 255.25 18 214 171.5 149.25 80 150 16
wrenches KW0400327 260 220 Ø167 220 18 197.5 155.5 130 70 130 16
Features :
• Designed for indexing both horizontal and vertical position
• It is most optimum in use for milling, drilling machine
Article No. A B C D E F G H I J K L M N O
KW0400328 310 255 200 78 16 18 230 150 75 126 90 155 244 285 Ø210
KW0400329 250 220 188 78 16 18 197.5 130 66 112 80 150 220 235 Ø167
MACHINERY 235
ROTARY TABLE
HORIZONTAL / VERTICAL ROTARY TABLE
Dimension:
Optional Accessories:
3 Jaws Chuck
(KW0400342/343/344)
Features:
• Designed for indexing both horizontal and vertical
position
• It is most optimum in use for milling, drilling, and
planner machine Article No. A B C D E F G H J L M N P Q d h
Accessories included: KW0400330 242 196 125 Ø160 12 186 12 85 12 194 MT2 82 37 125 ø25 6
• T-slot bolt sets (4sets)
KW0400331 285 236 150 Ø200 14 208 14 100 15 211 MT3 99 48 125 ø30 6
KW0400332 328 286 170 Ø250 14 253 14 110 16 241 MT3 106 48 125 ø25 6
Article No. A B C D E F H L M d h
Accessories included: KW0400333 310 252 235 250 14 199 140 205 MT3 40 6
• T-slot bolt (2sets) KW0400334 380 322 252 320 16 241 175 255 MT4 40 10
236 MACHINERY
3 JAW CHUCK, ANVIL, and BENCH VISE
3 JAW CHUCK
Dimension:
Features:
• These chucks are tool rooms and for production work
• The chuck are mounted to spindle nose through
intermediate flange
• Available with two set of hard solid jaws
(inside and outside) or three pieces
reversiable hard jaw
ANVIl
Features:
• Cast Iron build
• 4 base lugs for permanent fixing
Features:
• Designed for professional
• Cast iron body with reinforced
stressed point
• 120° swivel base
• Bench Mount
Specification
Article No. Description Width of Jaws Dimension Weight
(mm) (mm) (kg)
KW0400035 Bench Vise 4” with Swivel Base 100 710 x 350 x 190 11.25
KW0400036 Bench Vise 5” with Swivel Base 125 450 x 200 x 250 20
KW0400037 Bench Vise 6” with Swivel Base 150 520 x 220 x 270 30
KW0400038 Bench Vise 8” with Swivel Base 200 600 x 250 x 300 47
D - Large Anvil
Precision casting
body powder
coating finish
High Quality steel
Polished plate for beam
A - Width Jaw
Features:
• Precission casting body and E - Clamp round 360o Swivel base
powder coating finihsed. object use
• 360° swivel base.
Specification
Article No. Description
A (mm/inch) B (mm) C (mm) D (mm) E (mm) Dimension (mm) Weight (kg)
KW0400362 American Bench Vise 4” with 360o Swivel Base 100/4” 127 87.5 72 x 70 Ø 10 - 76 360 x 310 x 220 12.2
KW0400363 American Bench Vise 5” with 360o Swivel Base 125/5” 140 95 78 x 78 Ø 10 - 78 430 x 190 x 230 16.2
KW0400364 American Bench Vise 6” with 360o Swivel Base 150/6” 178 107 90 x 100 Ø 10 - 91 460 x 230 x 280 25.2
MACHINERY 237
BENCH, DRILLING VISE and MACHINE VISE
BENCH VISE with SWIVEL HEAD TABLE VISE
ANGLE CLAMP
Features:
• Can be used on many kinds of
metal working such as welding,
riveting, moulding, etc.
• It can be used on clamping of
workpieces whose function is just
a vise
Specification
Article No. Description Jaw Height Max Opening Jaw Length Weight
(mm) (mm) (mm) (kg)
KW0400270 Angle Clamp 35 x 60mm 35 60 60 5
KW0400271 Angle Clamp 60 x 100mm 60 100 90 12
Features:
• Quick release to open the jaws
Specification
Article No. Description Width of Height of Max.
Dimension Weight
Jaw Jaw Opening
L x W x H (mm) (kg)
(mm) (mm) (mm)
KW0400189 Drill Vise Quick Type 3” 78 19 78 320 x 300 x 220 20
KW0400190 Drill Vise Quick Type 4” 100 26 110 370 x 350 x 260 30
KW0400191 Drill Vise Quick Type 6” 150 26 150 400 x 250 x 320 30
238 MACHINERY
MACHINE VISE
ACCU-LOCK PRECISION MACHINE VISE
Features:
• It is one of main attachments for milling, drilling machine, it is particularly suitable for the finishing of the
precision parts
• The accuracy of vise (paralelism and squareness) is 0.025/100mm
• The special segment the moveable jaw forces the vertical pressure downward when the horizontal pressure
works, so that this jaw does not lift the workpiece
• Four positions allow extra capacity to change opening of jaw
• As the thrust component of the screw is equipped with thrust needle bearing it can be easily opereted
Article No. KW0400309 KW0400310 KW0400311
Accu-Lock Prec Machine Accu-Lock Prec Machine Accu-Lock Prec Machine
Description Vise 100mm, 100mm Vise 160mm, 170mm Vise 200mm, 210mm
Opening Opening Opening
Specification
Width of Jaw (mm) 100 160 200
Height of Jaw (mm) 32 45 50
Max. Opening (mm) 100 170 210
Weight (kg) 17 33 54
Features:
• Cast iron construction
• Crank handles for adjusting vise front to back and left to right
Specification
Width Height Max. Length- Cross-
Article No. Description Dimension Weight
of Jaw of Jaw Opening wise wise
L x W x H (mm) (kg)
(mm) (mm) (mm) Stroke Stroke
KW0400192 Drill Vise Cross Type 3” 80 30 65 70 65 240 x 240 x 140 6
KW0400193 Drill Vise Cross Type 4” 102 35 90 80 80 270 x 270 x 160 9.5
KW0400194 Drill Vise Cross Type 6” 152 42 135 100 100 320 x 320 x 180 16.7
Features:
• Tilting drilling machine vice can be tilted to any position from 0º ~ 90º and lock.
• It is one of main attachments for drilling machine, it can be used for machining inclinable surface.
MACHINERY 239
MACHINE VISE
MACHINE VISE with SWIVEL BASE
450 Tilt
Features:
Base rotates 3600 • The vise can be vertically tilted to any position from
0º ~ 45º and lock, and can be rotated 360º with a
swivel base
KW0400275 KW0400272-KW0400274
Features:
• Cast iron construction
• Crank handles for adjusting vise front to back and left to right
Article No. KW0400312 KW0400313 KW0400314
Hydraulic Machine Vise Hydraulic Machine Vise Hydraulic Machine Vise
Description
152mm, 320mm Opening 160mm, 125mm Opening 200mm, 160mm Opening
Specification
Width of Jaw (mm) 152 160 200
Height of Jaw (mm) 52 63
Max. Opening (mm) 320 125 160
KW0400312 - KW0400314
Weight (kg) 50 52 66
FREE VISE
HEAVY DUTY
Features:
• Free style clamping position
• Heavy duty application
Specification
Article No. Description Dimension Weight
Jaw Stroke (mm)
(L x W x H) (mm) (kg)
KW0400061 Free Vise Heavy Duty 8 140 x 60 x 65 8
KW0400062 Free Vise Heavy Duty 10 190 x 86 x 86 16
240 MACHINERY
STEEL CLAMPING KIT and DRILL CHUCK ARBOR
STEEL CLAMPING KIT
Features:
• 6 pcs T-nuts
• Heat treaded steel black with oxide finish.
• 4 pcs coupling nuts
• Block size 1” (25mm). Set in plastick rack consist of:
• 6 pcs flange nuts
• 24 pcs Studs (4ea, 3/4/5/6/7/8 inches or
• 6 pcs step clamps
75/100/125/150/175/200mm).
• 6 pcs step blocks
Specification
Article No. Description
Table Slot Stud Size Weight (kg)
KW0400383 Steel Clamping Kit M12 x 1.75P(52pcs) 14 M12 - 1.75P 9.4
KW0400370 Steel Clamping Kit M14 x 2.0P (52pcs) 16 M14 - 2.0P 11.1
KW0400371 Steel Clamping Kit 1/2 - 12W (52pcs) 5 /8 1/2 - 12W 10.4
KW0400284 Steel Clamping Kit M16 x 2.0P (52pcs) 18 M16-20.P 12.6
Note : other sizes available by request
Features:
• Suitable for use on heavy duty and extra heavy duty
• For milling machine, lathe, drill machine and wood working machine
MACHINERY 241
DRILL CHUCK
BALL BEARING DRILL CHUCK
Features:
• Product of Grade M is used in high precision
machine-tool, such as machining center and digital
control machine-tool
Open Closed Outer
Taper Clamping
Article No. Description Diameter Weight
Capacity (mm) Length Length
Mount (kg)
(mm) (mm) (mm)
Keyless Drill Chuck 0-13mm
KW0400358 JT6 1.0 – 13.0 90 102 49 1.02
JT6 3302-069
Keyless Drill Chuck B16
KW0400863 B16 1.0 – 13.0 90 102 49 1.03
0-13mm 3302-071
Keyless Drill Chuck 3-16mm
10040817 JT6 3.0 – 16.0 97 110 55 1.33
JT6, 3302-073
Keyless Drill Chuck 3-16mm
KW0400951 JT3 3.0 – 16.0 97 110 55 1.33
JT3 3302-074
Features:
• Can be use in CNC Milling Machine with JIS Spindle
Specification
Article No. Description
ØD L Dimension (mm) Weight (kg)
KW0400280 BT40 Drill Chuck 1- 8mm 37 85 37 x 37 x 85 1.3
KW0400395 BT50 Drill Chuck 1-16mm 58 120 58 x 58 x 120 4.5
242 MACHINERY
MILL and COLLECT CHUCK KIT
FACE MILL ARBOR
Features:
• Perfectly Clamp face mill cutter
Cutting Inside
Height H Cutting Weight
Article No. Description Diameter Diameter Blade
(mm) Angle (º) (kg)
(mm) (mm)
Face Milling Cutter
10068255 80 25.4 50 45 5 2.1
45DEG (inch), 6001-001
Face Milling Cutter
10030450 80 27 50 45 5 2.1
45DEG (mm), 6001-001
Face Milling Cutter
KW0400372 80 27 50 90 4 1.1
90DEG 80mm 6001-111
Face Milling Cutter
10068255 & 10030450 KW0400372-374 KW0400373 100 32 55 90 5 1.9
90DEG 100mm 6001-112
Face Milling Cutter
KW0400374 125 40 60 90 6 3
90DEG 125mm 6001-113
Features:
• Designed for heavy
cutting and milling
process generally
Specification
Article No. Description
Size ØD ØD1 L L1 H1 H2 G Weight (kg)
KW0400610 BT30 Sidelock Endmill Holder D20 x 75mm BT30-SLA20-75 20 52 75 70 23 19 M12x1.5 1.2
KW0400234 BT40 Sidelock Endmill Holder D20 x 90mm BT40-SLA20-90 20 52 90 70 23 19 M12 x 1.5 1.8
KW0400235 BT40 Sidelock Endmill Holder D25 x 90mm BT40-SLA25-90 25 62 90 80 24 25 M18 x 1.5 2.1
KW0400236 BT40 Sidelock Endmill Holder D32 x 90mm BT40-SLA32-90 32 63 90 80 24 28 M20 x 1.5 2
KW0400398 BT50 Sidelock Endmill Holder D32 x 105mm BT50-SLA32-105 32 72 105 80 24 28 M20x1.5 5.3
KW0400611 BT50 Sidelock Endmill Holder D40 x 120mm BT50-SLA40-120 40 90 120 90 30 32 M20x1.5 6.5
MACHINERY 243
COLLECT CHUCK KIT
ER COLLET CHUCK KIT
MT NT BT Straight R8 Features:
• Including shank, full set of collets, wrench and case
(ER16, ER20, no Wrench)
• ER16, 20, 25 packed in wooden box (W)
• ER32, 40, 50 packed in plastic box (P)
• Please notify drawbar or pull stud size when
ordering
Features:
• Including shank, full set of collets, wrench and case.
Specification
Article No. Description ColletSet Set Weight
Shank Type Range Pieces (kg)
OZ32 Chuck Chuck
KW0400360 Milling Chuck BT40 OZ32 3102-003 BT40 2.3
Only Only
KW0400220 Milling Chuck Set BT40 OZ32 D3-25 3102-110 BT40 OZ32 6 – 32 15 9.4
KW0400067 Milling Chuck Set NT50 OZ25 D6-25 3101-105 NT50 OZ25 6 – 25 7 8.5
244 MACHINERY
COLLECT CHUCK KIT
MULTI LOCK MILLING CHUCK
Content Collet Set Size
7pcs/ mm 6, 8, 10, 12, 16, 20, 25 Features:
MC32 set • Including shank, full set of collets,
inch 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1”
wrench and case
6pcs/ mm 4, 6, 8, 10, 12, 16
MC20 set inch 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”
Set Set
Taper Collet Length Dia.
Article No. Description Pieces Weight
Shank Type L (mm) D (mm) Range (kg)
(mm) (pcs)
Multi Lock Milling Chuck NT40
KW0400825 NT40 MC32 95 75 Chuck Only 3.1
3202-002
Multilock Mill Chuck NT40 6-25mm
KW0400605 NT40 MC32 95 75 6 – 25 7 7
3202-102
Multi Lock Milling Chuck NT50
KW0400826 NT50 MC32 100 75 Chuck Only 5.1
3202-004
Multilock Mill Chuck BT30 4-16mm
KW0400607 BT30 MC2 95 52 4 – 16 6 6
3202-112
Multi Lock Milling Chuck BT40
KW0400508 BT40 MC32 105 75 Chuck Only 3.2
3202-005
Multilock Mill Chuck BT40 6-25mm
KW0400606 BT40 MC32 105 75 6 – 25 7 7
3202-105
Multi Lock Milling Chuck BT50
KW0400482 BT50 MC32 135 75 Chuck Only 7
3202-007
Features:
• Automatic feed and cushion drive
• Smoothness and accurate tapping application.
Features:
• Tension and compensation feature allows
taps to follow their own thread lead
• With extreme light compensation
comperession and tension operated by
ball cage
Specification
Article No. Description Length Compensation Weight
Thread Size L ØD₂ ØD₁ Collets
Compression Tension (kg)
BT40 Quick Change Tapping Chuck
KW0400227 M3-M12 62 36 19 7.5 7.5 TC-312 1.3
M3-M12
BT40 Quick Change Tapping Chuck
KW0400228 M8-M20 93.4 53 31 12.5 12.5 TC-820 1.8
M8-M20
BT40 Quick Change Tapping Chuck
KW0400229 M15-M33 164 78 48 20 20 TC-1433 4
M14-M33
MACHINERY 245
PULL STUD, TOOL SETTING STAND, TOUCH POINT SENSOR, and Z-ZERO SETTER
PULL STUD
Features:
• Height quality pull stud for connection
between tool holder and taper spindle
Specification
Article No. Description
Taper No. a˚ L L1 L2 D d1 d2 d3 M
KW0400612 BT30X45DEG Pull Stud BT30 x 45˚ 45 43 23 18 16.5 11 7 12.5 M12
KW0400197 BT40X45DEG Pull Stud BT40 x 45˚ 45 60 35 28 23 15 10 17 M16
KW0400613 BT50X45DEG Pull Stud BT50 x 45˚ 90 85 45 35 38 23 17 25 M24
KW0400622 10054664
Features:
Beeper • The red lamp with setting red glue, it can concentrate light and resist water
• It will give up beep sound at the same time when the red lamp light up
• When work lamp light up to be incluence visual sense, it can be probe by the beep sounder
• It can be sound due in the reverse side and can`t be seen of the side
• When probe touch the deep hole while you can`t see the red light, but you can hear the sound by sounder
• Accuracy : within 0.005mm
Specification
Type Description Battery Weight
D d1 d2 L l1 l2
Type (kg)
Touch Point Sensor with UM-5#(SP) 0.30
KW0400401 Ø20 18 10 160 79 41
beeper 20mm x 2pcs
KW0400094
Specification
Article No. Description
Material Hardness Weight (kg)
KW0400094 Touch Point Sensor Alloy Steel 3402-100 Alloy Steel 56 HRC 0.06
KW0400095 Touch Point Sensor Alloy Steel 3402-101 Alloy Steel 56 HRC 0.06
KW0400319 Touch Point Sensor Stainless 3402-103 Stainless Steel 60 HRC 0.06
KW0400775 Touch Point Sensor Ceramic D10MM3402-104 Ceramic 60 HRC 0.06
Z-ZERO SETTER
Features:
• Made of high grade steel
• Equipped with precision dial indicator
• Standard and magnetic type setter
246 MACHINERY
LIVE CENTER PRECISION, GROUND PARALLEL and V-BLOCK
LIGHT DUTY LIVE CENTER
KW0400626 KW0400844
Features:
• Made of alloy steel under heat treatment
• Applicable for middle and high speed lathe with light load
Article No. Description Taper Size A (mm) B (mm) d (mm) D (mm) Accuracy Max. (Rpm) Weight Packing Size (mm)
KW0400626 Light Duty Live Center MT3 5001-003 MT3 32 46 26 45 0.005 2000 0.9 170 x 50 x 52
KW0400627 Light Duty Live Center MT4 5001-004 MT4 34 46 30 48 0.005 1800 1.3 195 x 58 x 56
KW0400628 Light Duty Live Center MT5 5001-005 MT5 50 62 45 68 0.005 1500 3.2 268 x 56 x 77
KW0400844 High Speed Nc Live Center MT4A 5001-021 MT4 42 62 32 63 0.005 3000 2.2 253 x 92 x 80
KW0400776 High Speed Nc Live Center MT5A 5001-022 MT5 57 71 40 83 0.005 2500 4.5 303 x 108 x 101
KW0400629 Inter-Change Live Center MT3 5001-041 MT3 23 44 30 41 0.008 3000 1.4 255 x 138 x 100
KW0400630 Inter-Change Live Center MT4 5001-042 MT4 23 51 32 47 0.008 2500 2 255 x 138 x 100
KW0400516 Inter-Change Live Center MT5 5001-061 MT5 37 70 40 87 0.005 3000 5.5 275 x 147 x 97
KW0400162
HRC 48-53
KW0400182
W x H x L x pcs (mm) W x H x L x pcs (mm)
8 x 16 x 150 x 2 8 x 34 x 150 x 2 W x H x L x pcs (mm) W x H x L x pcs (mm)
Features:
8 x 18 x 150 x 2 8 x 36x 150 x 2 10 x 14 x 150 x 2 10 x 28 x 150 x 2 • Made of high grade alloy steel hardened and ground
8 x 20 x 150 x 2 8 x 38 x 150 x 2 10 x 16 x 150 x 2 10 x 30 x 150 x 2 • Accuracy : 0.01mm
8 x 22 x 150 x 2 8 x 40x 150 x 2 10 x 18 x 150 x 2 10 x 32 x 150 x 2
8 x 24 x 150 x 2 8 x 42 x 150 x 2 Article No. Description
10 x 20 x 150 x 2 10 x 35 x 150 x 2 Precision Parallels 16 - 50mm width
8 x 26 x 150 x 2 8 x 44 x 150 x 2 KW0400162
8 x 28 x 150 x 2 8 x46 x 150 x 2 10 x 22 x 150 x 2 10 x 40 x 150 x 2 8mm (36pcs)
8 x 30 x 150 x 2 8 x 48 x 150 x 2 10 x 24 x 150 x 2 10 x 45 x 150 x 2 Ground Parallels 14 ~ 50mm width
KW0400182
8 x 32 x 150 x 2 8 x 50x 150 x 2 10 x 26 x 150 x 2 10 x 50 x 150 x 2 10mm (28pcs)
V-BLOCK Features:
• Made of cast iron with precision ground
• For round and square workpiece
Features:
• Made of hardened alloy steel and grounded
• Precission set for toolmakers and machinist
• Clamps are include in the set
L W H Packing Weight
Article No. Description
mm inch mm inch mm inch (mm) (kg)
V-Block with Clamp 2007-020 5 3 3
KW0400117 42 1 /8 70 2 /4 45 1 /4 75 x 80 x 100 1.9
70 x 45 x 42mm (2pcs/set)
MACHINERY 247
V-BLOCK, MAGNETIC BLOCK, TOOL MAKER VISE and ADJUST ANGLE PLATE
MAGNETIC V-BLOCK
Features:
• Made of hardened alloy steel
• Precision ground finishing surface
Length Width Height V-Width Weight
Article No. Description
(mm) (mm) (mm) (mm) (kg)
KW0400846 Magnetic V-Block 125mm 2015-511 125 60 73 38 3.3
Features:
• The v-block and parralels transfer the
magnetism from permanent magnetic chuck
• Made of high magnetic transfer steel
Features:
• Material : SUS440 stainless steel
• Squareness within 0.005 m/m
248 MACHINERY
LATHE GRINDING ATTACHMENT and CROSS SLIDE TABLE
LATHE GRINDING ATTACHMENT
For Internal Grinding
Features:
• Both the main shafts have been specially designed,
and the worldwide precision bearing is used to fit
the main shafts which are made of alloy steel
heat-treated for high wear resistance, precision, as
well as maintaning to the lowest temperature for
Types of Grinding for Work Pieces durability and stability.
• The motor base and the spindle bushing are
adjustable.
• The motor is well designed with a special and nice
apperance, The R.P.M. Of this motor varied depending
on the size of the workpiece.
• This grinder is capable of grinding the work piece to
minimum of 3mm in outer diameter and from 2mm
up in inner diameter (bore) with the accuracy within
0.003mm and a well finished surface. (supplied with
special attachments)
• The spindle bushing is made of cast iron, and
Standard Accessories supported by three surfaces, Therefore, it is durable
1 Internal spindle ...1 and elastic.
2 Pulley for internal grinding ...2 • Materials such as steel, iron, sopper (brass), aluminum,
3 Flat belt ...1 sact iron, plastics, procelain, marble, regardless, of
4 Diamond tool ...1 being heat treated or not, can be ground on this
5 Holder for diamond tool ...1 machine which functions lie a cylindrical grinder. So
6 Key folds (8, 5, 3, 2mm) ...4 it may lower the cost of the production.
External spindle Internal spindle
Grinder on lathe
Article no. Description HP size of wheel (RPM) non - Size of wheel
(RPM) non - (length of bed Swing (mm)
dia x width x dia x width x grinding depth lathe) (mm)
load speed load speed
hole (Inch) hole (Inch)
3750 16800
KW0400491 Tool post grinder on lathe 100 1/4 5 x 5/8 x 5/8 1 x 3/8 x 1/4 50 under 1200 320-400
5000 11500
3750 16800
KW0400492 Tool post grinder on lathe 125 1/2 5 x 5/8 x 5/8 1 x 3/8 x 1/4 70 1200-1800 430-850
5000 11500
3750 16800
KW0400288 Tool post grinder on lathe 150 1 5 x 5/8 x 5/8 1 x 3/8 x 1/4 70 1800-2400 550-900
5000 11500
2490 16800
KW0400471 Tool post grinder on lathe 165 1 8 x 3/4 x 3/4 1 x 3/8 x 1/4 70 2400-3000 650-1600
3070 11500
Main Dimension (mm) Net
Packing Size
Article No. Description Weight
A B C D E F G H J K L M N O L x W x H (mm)
(kg)
KW0400491 Tool Post Grinder on Lathe 100 235 200 170 40 - 110 50 80 150 28 45 10 25 64 24 450 x 320 x 340
KW0400492 Tool Post Grinder on Lathe 125 270 230 230-280 48 - 110 65 92 150 34-58 90 15 25 75 35 520 x 430 x 350
KW0400288 Tool Post Grinder on Lathe 150 280 275 250-300 48 160 110 65 102 150 40-65 105 40 30 85 38 520 x 430 x 350
KW0400493 Tool Post Grinder on Lathe 175 315 300 260-320 60 170 138 120 104 280 45-70 135 40 30 92 75 650 x 460 x 460
KW0400494 Tool Post Grinder on Lathe 185 352 350 300-340 80 180 138 85 190 330 45-70 140 40 32 120 80 700 x 500 x 520
MACHINERY 249
END MILL, TAP and DIE SET
ENDMILL HSS COBALT
KW0200928 KW0200416
Features: Features:
• JIS standard HSS-Co8 endmills • JIS standard HSS-Co8 endmills
• 2 flutes with center cutting • 4 flutes with center cutting
• Straight shank • Straight shank
• Used for slotting process • Used for slotting process
Mill Diameter Overall Length Length Shank Dia.
Article No. Description Weight (g)
(mm) (mm) of Cut (mm) (mm)
KW0200928 HSS-Co8 Endmill 2 Flutes JIS B 4211 2 55 6 6 100
KW0200929 HSS-Co8 Endmill 2 Flutes JIS B 4211 3 55 10 6 100
KW0200930 HSS-Co8 Endmill 2 Flutes JIS B 4211 4 60 12 8 100
KW0200931 HSS-Co8 Endmill 2 Flutes JIS B 4211 6 65 15 8 100
KW0200932 HSS-Co8 Endmill 2 Flutes JIS B 4211 8 75 21 10 200
KW0200933 HSS-Co8 Endmill 2 Flutes JIS B 4211 10 80 26 10 300
KW0200934 HSS-Co8 Endmill 2 Flutes JIS B 4211 12 90 31 12 300
KW0200414 HSS-Co8 Endmill 4 Flutes JIS B 4211 2 55 68 6 100
KW0200415 HSS-Co8 Endmill 4 Flutes JIS B 4211 3 55 10 6 100
KW0200416 HSS-Co8 Endmill 4 Flutes JIS B 4211 4 60 12 8 100
KW0200417 HSS-Co8 Endmill 4 Flutes JIS B 4211 5 65 15 8 100
Mild Steel
Alloy Steel Stainless Steel Tool Steel
Carbon Steel
Tool Steel Hardened Steel Hardened Steel Heat Resistant Alloy Steel,
Work Cast Iron
SCM, SNCM, SNC Prehardened Steel Prehardened Steel Titanium Alloy, Inconel,
Material SS400,S55C,FC250
Tensile Strength: SKT, SUS304 SKT,SKD,SKD61 Hatalloy
Tensile Strength:
735 ~ 980Nmm² 30~38HRC 38~45HRC
-750Nmm²
Mill Dia. Feed Speed Feed Speed Feed (mm/ Feed Feed (mm/
Speed (rpm) Speed (rpm) Speed (rpm)
(mm) (mm/min) (rpm) (mm/min) (rpm) min) (mm/min) min)
2 6,250 70 5,550 51 3,950 25 2,950 20 - -
3 4,450 90 3,750 58 2,600 40 1,950 20 1,200 11
4 3,500 101 2,600 58 1,950 45 1,450 27 850 11
5 2,750 107 2,190 70 1,550 51 1,130 27 660 11
6 2,310 120 1,850 85 1,270 51 950 27 550 14
8 1,750 135 1,350 101 950 58 660 35 350 14
10 1,350 155 1,070 101 750 58 580 45 325 19
12 1,130 155 900 107 620 58 450 45 265 19
40
pcs
10 12 40
pcs pcs pcs
Features KW0200639:
Contents of KW0200636: Contents of KW0200637: Contents of KW0200638: • UNC and UNF thread
• 4 pcs Metric Coarse Dies Size : • 5 pcs Metric Dies Sizes : • 16pcs Metric Dies Sizes: 3 x 0.5, Contents of KW0200639:
3, 4, 5 and 6mm - 1” O/D 6 x 1.0, 7 x 1.0, 8 x 1.25, 3 x 0.6, 4 x 0.7, 4 x 0.75, 5 x 0.8, • 10pcs UNC Dies Size : 4-40, 6-32,
• 4 pcs Metric Taper Taps Sizes as Dies 10 x 1.5, 12 x 1.75 5 x 0.9,6 x 1.0, 6 x 0.75, 7 x 1.0, 8-32, 10-24, 12-24,1/4, 5/16, 3/8, 7/16, 1/2
• 1 pc Die Handle 1” O/D • 5 pcs Metric Taps Sizes : 7 x 0.75, 8 x 1.25, 8 x1.0, • 6pcs UNF Die Size : 10-32, 1/4, 5/16, 3/8,
• 1 pc T Type Tap Wrench 6 x 1.0, 7 x 1.0, 8 x 1.25, 10 x 1.25, 10 x 1.5, 12 x 1.75, 12 x 1.5 7
/16, 1/2
10 x 1.5, 12 x 1.75 • 1pc NPT Die Size 1/8-27 • 1pc NPT Die Size 1/8-27
• 1 pc Tap Wrench • 16pcs Metric Taps Sizes as Dies • 10pcs UNC Taps : Sizes as UNS Dies
• 1 pc Die Handle 1” O/D • 1pc NPT Tap Size as 1/8-27 • 6pcs UNF Taps : Sizes as UNF Dies
• 1pc Tap Wrench M3~M12 • 1 pc NPT Tap Size : 1/8 ~ 27
• 1pc T Type Tap Wrench M3 - M6 and Handle • 1 pc Tap Wrench : 1/16”~ 1/2”
• 1pc Die Wrench : 25mm O/D • 2 pcs T Type Tape 1/16”~ 1/4”
• 1pc Screwdriver • 1 pc Die Wrench 1” O/D
• 1pc Screwpitch Gauge • 1 pc Screwdriver
• 1 pc Screwpitch Gauge
Article No. Description Weight (kg) Article No. Description Weight (kg)
KW0200636 Tap and Die Set Metric M3-M6 (10pcs) 0.5 KW0200638 Tap and Die Set Metric M3-M12 (40pcs) 1.33
KW0200637 Tap and Die Set Metric M6-M12 (12pcs) 0.8 KW0200639 Tap and Die Set UNC and UNF 4-40, ¼ ~ ½ (40pcs) 1.6
250 MACHINERY
TAP, DIE SET and CIRCULAR SAW
TAP and DIE SET
45 45 58
pcs pcs pcs
110
pcs
Article No. Description Weight (kg) Article No. Description Weight (kg)
KW0200640 Tap and Die Set Metric M6-M24 (45pcs) 6.8 KW0200642 Tap and Die Set Metric M3-M12 (58pcs) 6.8
KW0200641 Tap and Die Set UNC and UNF ¼ ~ 1” (45pcs) 6.8 KW0200643 Tap and Die Set Metric M2-M18 (110pcs) 6.8
Weight
teeth mm 0.1 x D 0.025 x D Article No. Description Size Tooth
(kg)
3 10-15 15 40 KW0200048 Circular Saw Blade for steel 250 x 1.5 x 32 -3T 250 0.6
4 15-20 20 50 KW0200049 Circular Saw Blade for steel 250 x 2.0 x 32 -4T 200 0.6
5 20-25 25 60 KW0200050 Circular Saw Blade for steel 250 x 2.0 x 32 -6T 128 0.6
6 25-30 30 70 KW0200051 Circular Saw Blade for steel 250 x 2.0 x 32 -8T 100 0.6
8 30-50 40 140 Run Out KW0200057 Circular Saw Blade for steel 275 x 2.0 x 32 -4T 220 0.8
9 50-60 60 150 Ø Standard KW0200052 Circular Saw Blade for steel 275 x 2.5 x 32 -4T 220 0.8
10 60-80 50-70 160 175 - 275 0,2 KW0200053 Circular Saw Blade for steel 275 x 2.5 x 32 -6T 140 0.8
12 80-90 60-100 -
KW0200058 Circular Saw Blade for steel 315 x 2.5 x 32 -4T 250 1.4
14 100 90-140 - 300 - 400 0,25 KW0200059 Circular Saw Blade for steel 315 x 2.5 x 32 -6T 160 1.4
MACHINERY 251
252 MACHINERY