2ALS8 NS9633 User Manual 3484852
2ALS8 NS9633 User Manual 3484852
2ALS8 NS9633 User Manual 3484852
Quickly set up
This product is compatible for MIJIA intelligent platform, which can be controlled by “MIJIA” App; it is
supported to MIUI system and can lined with other intelligent products of MIJIA
1. APP Download
Search for “MIJIA” in application store or scan the QR code below to download and install MIJIA APP
3. Buy more
Please download MIJIA APP and login MIJIA Store to buy more intelligent products and high quality
goods, or scan the QR code below to browse the page of MIJIA Store
The functions of actual product may not be conformed to the contents in the instructions totally due to technical upgrad-
ing and firmware updating.
In order to get the latest function introduction and safety use information, please visit corresponding section of MI
community or Ninebot official BBS, and communicate with other users.
Online customer service: www.mi.com/service
Service telephone: 400-100-5678
www.mi.com
Version V 1.2
Welcome to use our product 1. Product and accessories
Thank you for choosing MI electric scooter (hereinafter referred to as electric scooter), The whole electric scooter
and the electric scooter is a kind of fashion sport recreational device. Instruction Legal
manual statement Cur card
Contents
Electric Scooter Instruction Manual Electric Scooter Legal Statement Cue Card
4. Charger connection 05
5. Learn to ride 05
6. Safety tips 07
Please carefully check whether the goods in the packaging box are complete and under good conditions, and in case
of any absence or damage and other problems, please visit after sales service page of MI www.mi.com/service or call
the service telephone of MI 400-100-5678 for consulting.
02
2. Functional schematic diagram 3. Electric scooter body assembly
Accelerator
1. Fasten the vertical tube of scooter and open 2. Install the horizontal handle on the
Head light Control panel the parking holder vertical tube
Brake handle Handle-bar bell
Brake light
Disc brake
3. Use the hexagon wrench in the packaging box 4. Carry on switch testing after the
to lock the screws on both sides tightly installation is finished
Parking
In-wheel motor holder
Battery
Charging mouth compartment
Control panel
there are four power indicator lights on the control panel to show the power of the battery. The power indicator lights will
show the indicate status according to the sequence of normal light, flickering and quenching from up to down. When
four lights are all on normally, the power is about 100% ~ 86%; if there are 3 lights on normally and only 1 light is
Power
flickering, the power is about 85% ~ 71%; and so forth, the flickering power indicator light will be quenching with the
indicator: consuming of power. When the power indicator light at the bottom is flickering, it means that the power will be used up
very soon, and please charge the electric scooter before using. When the power is used up, and the four lights are all
quenching, the scooter will glide through inertia until the scooter is stopped naturally.
the power indicator light at the bottom has two colors, white and green. The light is white when the scooter is working
Mode
under normal mode; the light is green when the scooter is under energy-saving mode. (Energy-saving mode: the maximum
indicator: speed is 18km/h, and the accelerator is more smoothly, which is suitable for beginner to get familiar with riding.)
under shutdown status, pressing the switch shortly can start the scooter, and long time pressing the switch for 2s and
Power more under power-on condition can close down the scooter. When the scooter is starting up, shortly press the switch
switch: once: start up/shut down the driving light; shortly press the switch continuously for twice: shift in the normal mode and
energy-saving mode.
03 04
4. Charger connection
Open the rubber plug Insert the charging plug Tightly buckle the
rubber plug when
charging is finished
2 Stand on the pedal with one leg and use the 3 Step on the pedal by both legs when the
other leg to thrust against the ground electric scooter is gliding on the ground,
and slightly press the accelerator thumb
5. Learn to ride shifter (the accelerator can be started when
the speed is over 5km/h)
You may get hurt during the learning period, 1 Start up the scooter and check the power 4 Loosen the accelerator thumb shifter for slow 5 If you want to change the direction, slightly
and please wear helmet and protectors all the indicator light down, and energy recover y system will be shift your body weight to the direction to be
way, as shown in the figure. started automatically for slowing down; vigor- turned and slowly turn the handle
ously hold the brake handle at the front left side
of horizontal handle for emergency stopping
05 06
6. Safety tips
Please get rid of safety risks
Avoid riding electric Do not pass the deceleration strip, elevator threshold, cobbly
scooters in the rain road and other irregular roads in high speed. Keep middle or low
speed (5-10km/h) when driving on rugged road. Bend your knees
slightly for better adjusting the complex roads mentioned above
Do not hang backpack or other Do not step only one leg on the pedal
Avoid knocking on door frame, Please do not speed up on downhill path heavy goods on the handle in when the scooter is running
elevator and other obstacles at front
high place
07 08
Never try the following dangerous actions
Prohibit riding electric scooters on Prohibit turn the handle by a large Prohibit stepping the end of Prohibit touching disc brake
motorway and residential district scale under high speed driving mud guard
with persons and vehicles mixed
Prohibit riding electric scooters in the Prohibit riding an electric scooter by Prohibit driving electric scooters Prohibit riding electric scooters up
ponding that is higher than 2cm many person or riding an electric without hands holding on and down the stairs or jumping
scooter with a child in hug obstacles
09 10
Safety tips 7. Folding and carrying
● Electric scooter is a kind of sport recreational tool rather than vehicle, however, once the electric scooter is driven
into public area, it will have the natures of vehicles and have the safety risks that all vehicles may have. Riding the
electric scooter in strict accordance with the tips on this instruction manual can protect you and others from dangers
at the most extent, and users should abide by the traffic rules and regulations made by the state or province or
cities.
● At the same time, you need to understand that: once the electric scooter is ridden on public ways or other public
places, you may face the risks caused by illegal driving by others or incorrect operation of vehicles, even though
that you ride the electric scooter in strict accordance with this safety driving manual. Just like that people who walk
or ride bicycle on road may be hurt by other vehicles; like all other vehicles, the faster you ride the electric scooter,
the longer distance is needed to stop the scooter, and you may fall down due to trackslip or overbalance if you stop
the electric scooter emergently on smooth road. Therefore, it’ s very important to maintain sharp vigilance, keep Folding Opening
proper speed and keep a certain safe distance with others or other vehicles. Please be careful and ride the scooter
in low speed when ride into unfamiliar terrain.
Confirm that the electric scooter is off; hold the vertical tube and push aside the folding thumb shifter, open the folding
● Please respect the road right of pedestrians. Avoid scaring the pedestrians, especially for children. Remind pedes- wrench, and hook the tinkle bell with back mud guard after aligning the position of tinkle bell and back mud guard. For
trians and ride in low speed when passing behind the pedestrians. Go through from the left side of pedestrians as opening the electric scooter, press the hook at the tinkle bell place, when the hood of tinkle bell is divorced from hook of
far as possible (it is applicable to the countries and places that all vehicles keep to the right). When you ride a mud guard, stand the vertical tube, lock the folding board tightly and put the folding thumb shifter back.
scooter face to pedestrians, keep the right side and ride in low speed.
● When you drive the electric scooter at the countries and regions that there is no national standards and rules related
to the electric scooter so far, please do follow the safety requirements toward users stipulated in this manual. As for
any property loss, personal loss, accident, legal dispute and any other adverse events caused conflict of interest
arisen from violating the using behaviors mentioned in this manual, the MI Communication Technology Co., Ltd. shall
not bear any direct responsibility and joint liability.
● For fear of any damage, do not lend the electric scooter to personnel who can’ t operate it. If you lend the electric
scooter to your friends, please take charge of the safety of your friends, teach him/her how to use it and tell him/her
to wear safety protectors.
● Please carry out basic checking to the electric scooter every time before using it; if there is obvious loose parts, low
battery life, the tire is leaked slowly or excessive wear, turn the handle with abnormal noise or turn the handle inval-
idly and any other abnormal situation, please stop using it immediately and never ride the scooter forcibly. Call the
service telephone of MI 400-100-5678 to get professional guiding idea or maintenance service. Carrying
Hold the vertical tube by one hand or both hands for carrying after folding the electric scooter.
11 12
Disc brake debugging
8. Daily care and maintenance
Cleaning and storage for electric scooter
If there are dirt and stains on the surface of the electric scooter, use soft cloth dipped with clean water to wipe the dirt; if the
dirt and stains are hard to be cleaned, coat some toothpaste on dirty place, use the brush to brush repeatedly, and use wet Brake cable
close to clean. If the plastic part has scratches, use abrasive paper or other abrasive materials for polishing.
Note: do not clean the body by using alcohol, petrol, kerosene or other chemical solvent with corrosion and volatility, or other-
wise it will damage the appearance of body and internal structure seriously. Prohibit using pressure water gun for spraying and If you feel that the brake is too tight, use M5 hexagon wrench to loosen the tension disc screw on disc brake seat from
washing; when cleaning the electric scooter, be sure that the electric scooter is under off condition, the charging cable has
counter-clockwise direction, send back the brake line and slightly shorten the exposed line, and then tightly lock the
been pulled up and the rubber plug at the charging mouth is covered tightly, or otherwise you may get an electric shock or the
tension disc screw; if you feel that the brake is too loose, loosen the tension disc screw, pull out the brake line to let the
scooter may have serious fault since water is entering.
exposed line be longer, and then tightly lock the tension disc screw.
When the electric scooter is not used, keep the electric scooter at day and shady indoor place as far as possible and avoid
putting it outdoors for long time. Exposure to sunlight/overheated/subcooled outdoor environment will fasten the aging for the Handlebar shaking debugging
appearance and tire of electric scooter or reduce the service life of the electric scooter and battery.
13 14
9. Model parameter table 10. Name and content of harmful substances in the product
Performance Harmful substances
indicator Items Parameter of electric scooter
Part name Lead Mercury Cadmium Chromium Polybrominated Polybrominated
L x W x H [1] (cm) 108×43×114 VI biphenyls diphenyl ethers
(Pb) (Hg) (Cd)
Product size (Cr(VI)) (PBB) (PBDE)
After folding: L x W x H (cm) 108×43×49
Charger
Product weight Weight of the whole scooter (kg) About 12.5
Battery
Maximum load (kg) 100 Air jet
Riding requirements Applicable age (year) 16 ― 50 Charging mouth
Applicable height (cm) 120 ― 200 Main control board
Highest speed (km/h) About 25 Instrument circuit board
Typical endurance [2] (km) About 30 In-wheel motor
Maximum gradeability (%) About 14 Frame
Main parameters of
Applicable terrain Cement, asphalt road, flat soil road, stair no higher than 1cm, ditch no wider than
the whole scooter 3cm Tire
Working temperature (℃) -10 ― 40 This form is prepared according to the rules of SJ/T 11364.
Storage temperature (℃) -20 ― 45 : It means that the content of this harmful substance in all homogenic materials for this part is under the limitation requirements of GB/T 26572.
: It means that the content of this harmful substance in at least a certain homogenic materials for this part is over the limitation requirements of GB/T 26572.
Protective level IP54
Parameter of battery
Highest charging voltage (VDC) 42V 11. Trademark and legal statement
Rated capacity (Wh) 280
Intelligent battery management Abnormal temperature/short circuit/under voltage automatic dormancy/double is the registered trademark of MI Technology Co., Ltd. (hereinafter referred to as MI Company). All rights reserved to
system over charge/double over discharge protection the trademark . Other trademarks mentioned in the manual may be the registered trademarks of the owner. Naenbo,
Rated power (W) 250 Ninebot, No. 9 and other trademarks are trademarks of Ninebot (Tianjin) Technology Co., Ltd., which are protected by
Motor parameters laws, and no infringement allowed.
Largest power (W) 500
This manual is made by Ninebot (Beijing) Technology Co., Ltd. and have copyright, without written approval of Ninebot
Rated power (W) 71
(Beijing) Technology Co., Ltd., any unit or individuals shall not use, copy, change, record, spread or attached to other
Rated input voltage (VAC) 100 ― 240V ~ products for using and selling to any parts of this manual.
Rated output voltage (VDC) 42V This manual has covered various function introductions and using instruction as far as possible on printing. However, as
Charger parameter the products are perfecting constantly, design is changing, this manual may not be conforming to the products
Rated current (A) 1.7
purchased totally. Please scan the APP QR code on back cover to download APP that is suitable for Android or iOS
Product certification CCC,RoHS system and read the latest electric edition manual. Based on the updating of products, this manual may have deviations
on color, appearance and other aspects of actual products, and please refer to the actual products.
Charging time (h) About 5
15 16
12. Warranty policy III. Non warranty regulation
The After Sales Service of electric scooter will carry on after-sales “three guarantees” service in strict accordance with 1. Maintenance without authorization, misuse, collision, negligence, abuse, feed liquor, accidents, change, using the
Law of the People’ s Republic of China on the Protection of the Rights and Interests of Customers and Product Quality accessories that are not matched with this product incorrectly, tearing or altering label and anti-counterfeiting marks;
Law of The People's Republic of China, and the service contents are as follows:
2. Product has exceeded the valid period of “three-guarantee”;
I. Warranty period
3. Product has damages caused by force majeure events;
1. In case the product purchased have the performance fault stipulated in the Performance Fault Table of Electric 4. Product has faults that are nonconforming to the performance faults stipulated in the Performance Fault Table of
Scooter condition within 7 days from the next day of signing and the fault is confirmed after inspection by Mi Electric Scooter;
after-sales service center, you can enjoy goods returns or exchanging service for free;
2. In case the product purchased have the performance fault stipulated in the Performance Fault Table of Electric 5. Product has faults that are conforming to the performance faults stipulated in the Performance Fault Table of Electric
Scooter condition within 8 ~ 15 days from the next day of signing and the fault is confirmed after inspection by Mi Scooter caused by man-made reasons;
after-sales service center, you can enjoy goods exchanging and maintenance service for free;
6. Damaged caused by man-made reasons (including without limitation to feed liquor in scooter, puncture the tire,
3. In case the product purchased have the performance fault stipulated in the Performance Fault Table of Electric collision, traces & damaged caused by normal use of appearance parts, etc.);
Scooter condition within 12 months from the next day of signing and the fault is confirmed after inspection by Mi
after-sales service center, you can enjoy maintenance service for free; 7. If the product is used for commercial, such condition is not included in the warranty service.
Friendly reminder: As the packaging box is needed to ensure the safety of products in delivery, I suggest that you’ d
better keep the packaging box for at least 15 days from the next day of the signing.
Note: The internal hexagonal wrench and extended charging connector are matched consumables of the product,
which have no warranty period.
17 18
IC Radiation Exposure Statement for Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
User manuals for transmitters equipped with detachable antennas shall also contain the
following notice in a conspicuous location:
This radio transmitter (identify the device by certification number, or model number if
Category II) has been approved by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this list, having a gain greater than
the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son
numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal et l'impédance requise pour chaque type d'antenne. Les types
d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué,
sont strictement interdits pour l'exploitation de l'émetteur.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with “Industry Canada RSS-102 for radiation exposure limits set
forth for an uncontrolled environment”.
Déclarationd'exposition aux radiations:Cetéquipementestconforme aux limitesd'exposition
aux rayonnements IC établies pour un environnement non contrôlé.
This Class B digital apparatus complies with Canadian ICES -003. Avis de Conformité à
la Réglementationd’ Industrie Canada. Cetappareilnumérique de la classe B est conform à
la norme NMB -003 du Canada.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generate, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.