CS 1205 MSDS
CS 1205 MSDS
CS 1205 MSDS
ANTIOXIDANT CS 1205
Substance: 2,5-Di-Tert-Butylhydroquinone
Chemical Family:Phenolic
Manufacturer's Name: Guangzhou Chengshuai New Material Co.,Ltd.
Address: No.10, Jiqingxiang, Shiyicun, Shilou Town, Panyu Dist., Guangzhou
E-Mail: info@hhochem.com
Emergency Telephone Number : 86-20-84697353
HMIS@ rating involves data interpretations that may vary from company to company. They are intended only for rapid,
general identification of the magnitude of the specific hazard. To deal adequately with the safe handling of this material,
Inhalation: If symptomatic, move to fresh air. Get medical attention if symptoms persist.
Eyes: Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact
lenses. Get medical attention if symptoms persist.
Skin: Wash with soap and water. Get medical attention if symptoms occur.
1 of 4
MATERIAL SAFETY DATA SHEET
ANTIOXIDANT CS 1205
Special Fire-Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.
Hazardous Combustion Products: carbon dioxide, carbon monoxide
Unusual Fire and Explosion Hazards: Powdered material may form explosive dust-air mixtures.
Keep from contact with oxidizing materials. Minimize dust generation and accumulation. In the United States of America,
refer to NFPA@ Pamphlet No.654, "Prevention of Fire and Dust Explosions in the Chemical, Dye, Pharmaceutical,
and Plastics Industries."
Storage: Keep container closed.
Country specific exposure limits have not been established or are not applicable unless listed below.
Ventilation:
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched
to conditions. Supplementary local exhaust ventilation, closed systems, or respiratory and eye protection may be
needed in special circumstances; such as poorly ventilated spaces, heating, evaporation of liquids from large surfaces,
spraying of mists, mechanical generation of dusts, drying of solids, etc.
Respiratory Protection:
If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or
to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn.
In the United States of America, if respirators are used, a program should be instituted to assure compliance with
2 of 4
MATERIAL SAFETY DATA SHEET
ANTIOXIDANT CS 1205
Odor: odorless
Odor Threshold: not applicable
Specific Gravity: 1.07
Melting Point: 215-219 °C
Solubility in Water:
negligible
pH: not applicable
Flash Point: 216 °C (Cleveland open cup)
Autoignition Temperature: 421 °C (ASTM D2155)
Stability: Stable
Acute toxicity data, if available, are listed below. Additional toxicity data may be available on request.
Acute toxicity data, if available, are listed below. Additional toxicity data may be available on request.
This material has not been tested for environmental effects.
3 of 4
MATERIAL SAFETY DATA SHEET
ANTIOXIDANT CS 1205
SECTION 13 DISPOSAL CONSIDERATIONS
Discharge, treatment, or disposal may be subject to national, state, or local laws. Incinerate.
Important Note:
Shipping descriptions may vary based on mode of transport, quantities, package size, and/or origin and destination.
Consult your company's Hazardous Materials/Dangerous Goods expert for information specific to your situation.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and
the MSDS contains all the information required by the Controlled Products Regulations.
WHMIS (Canada) Status: noncontrolled
SARA 313: none, unless listed below
Carcinogenicity Classification (components present at 0.1% or more): none, unless listed below
4 of 4