Road Marking Material
Road Marking Material
Road Marking Material
1. INTRODUCTION
Road marking materials are substitute for conventional oil paints used for marking on the
roads such as dividers, zebra marking, bumps, etc. Due to their technical superiority, long
life, brightness, reflective properties and ease of application make road marking material
as preferred products by government and private users. In fact, all tenders for state and
national highways specify to use thermoplastic road marking materials.
Such materials are formulated using variety of chemicals and minerals and as per the
prescribed Bureau of Indian standards. The main requirement is the use of hydro carbon
resin and reflective glass beads.
Road marking thermoplastic materials have applications in state and national highways,
private buildings, colony, shopping complexes, industrial establishments, educational
campuses, etc. Such materials are heated at the time of application and applied using
portable machines on the road.
There are mainly two colors used for this application. White one is widely used as road
marking paint and yellow is used for very specific requirements such as bumps. Now
government has notified that all bumps in the country will be colored with yellow
thermoplastic paint to differentiate from zebra crossing and slow speed signs.
4. INDUSTRY OUTLOOK/TREND
Infrastructure sector in India is growing very fast with higher budgetary allocation by
government at central and state level. The target of constructing 40kms of road per day
will increase the demand for road markings. Moreover private places such as malls,
campuses and commercial spaces also use road marking in their premises. The future
of this industry is very bright as new road construction and old one both require marking
again and again.
Apart from road construction application, it is also used in commercial and industrial
establishments. The growth in GDP and high stress on construction activity has also led
to increase demand of thermoplastic material.
The major raw materials required are hydrocarbon resin, mineral powders, glass beads,
plasticizer, lubricants, pigment, etc. All the raw materials except hydro carbon resin and
glass beads are produced and available in India. Resin and glass beads are imported from
China, South Korea, Europe, etc. The costing of the final product is mainly depends on
the cost of resin and glass beads.
7. MANUFACTURING PROCESS
In the manufacturing process, mineral powders, additives and hydrocarbon resins are first
mixed in ribbon blender for about ten minutes and then resin and glass beads are added
and mixed together for another twenty minutes. It is very important to have uniform
distribution of all ingredients in the final product. At the end of process, material is
removed by screw conveyor and filled in 25 kg. plastic woven bags. The product is tested
in the laboratory particularly for reflective index using refractometer.
8. MANPOWER REQUIREMENT
For the production of PTFE tape following category of manpower will be required for day
to day production. Annual wages are also worked out.
Manpower Requirement
Sr. No. Designation of Employees Monthly Number of Value
Salary ₹ employees required Rs. in lacs
1 Unskilled man power 4,000 4 1.92
2 Supervisor 10,000 1 1.20
9. IMPLEMENTATION SCHEDULE
The project can be implemented within six months from the date of tying up of finance
as number of equipment are less and can be started in a rented premises.
The cost of project as per market rate of factory building, machinery, miscellaneous
items, working capital margin and preliminary and pre-operative expenses works out as
under:
Cost of Project
1 Land 30.00
2 Building 20.00
3 Plant & Machinery 15.00
4 Furniture, Electrical Installations 1.50
5 Other Assets 0.50
6 Margin for Working Capital 10.11
Total 77.11
Based on the present norms of the bank, means of finance is worked out as under
Means of Finance
Sr. No. Particulars Gross Amt. Margin % Margin Amt. Bank Finance
For the production of road marking paint, the machinery required are screw conveyor,
ribbon blender, weighing scale, liquid pump, sieve shaker & laboratory equipment for
testing of final product.
• Varahi Industries
Plot No. 83/6,
Near Kotak Mahindra Bank Phase 1,
G. I. D. C. Eatate, Vatva,
Vatva Industrial Estate,
Ahmedabad - 382445,
Gujarat
• Watcco Engineering
1 Shabari Giri,
behind Tekawade petrol pump
opp Akashwani Hadapsar,
Pune,
Maharashtra
The profitability is worked out as under after taking into account all variable and fixed
expenses as under.
Profitability Calculations
The proposed unit will have the production capacity of 500 MT per year. The unit cost of
power is taken at Rs. 8. The depreciation on building is taken at the rate of 5% whereas
for plant and machinery it is at 10%.
The sales price of road marking material is taken at the rate of Rs. 41,000 per MT.
There is no specific statutory requirement for paint industry. However MSME & GST
registration, IEC Code for Export of end products and local authority clearance may be
required for Shops and Establishment, for Fire and Safety requirement and registration for
ESI, PF and Labour laws may be required if applicable. Entrepreneur may contact State
Pollution Control Board where ever it is applicable.
For backward integration, promoter may think of mineral grinding and processing. In
case of forward integration, it is possible to add more products related to road
construction and safety such as signage, crash barriers and cat eyes.
Disclaimer:
Only few machine manufacturers are mentioned in the profile, although many machine
manufacturers are available in the market. The addresses given for machinery
manufacturers have been taken from reliable sources, to the best of knowledge and
contacts. However, no responsibility is admitted, in case any inadvertent error or
incorrectness is noticed therein. Further the same have been given by way of information
only and do not carry any recommendation.