Nothing Special   »   [go: up one dir, main page]

Trellex Gripstrips & Dust Control Sellantes

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Trellex Dust Control EN

Take the dust and noise out of materials handling

Description Function and benefits


Dust creates big problems! Modern aggregate operations Other benefits with the Trellex Dust Control system, in
and mineral processing facilities generate large amounts addition to taking care of dust, are
of dangerous dust. Not only is dust a health hazard, it also
 better work environment
accelerates wear and tear on equipment and complicates
maintenance work. Dust increases the risk of corrosion  reduced wear and corrosion
and the cost of maintenance.
 safe, fast and easy maintenance
With the Trellex Dust Control system there is virtually a 100
% dust seal. With simple, standardized components, we  reduced noise
customize the dust sealing system to the equipment.
The Trellex Dust Control system also reduces noise con- STM 27
siderably - in many cases up to 10 to 12 decibels.
Dust sealing cloth
Gripstrip 14

STM 10A STM 8A

Dust sealing cloth

Gripstrip 14
STM 3D-40

Screen side wall

STM 1A-60
STM 3D-40
Under chute

Picture 1. Example of the top canopy construction with arches Picture 2. Section (typical) of dust sealed screen
Trellex Dust Control Components
Trellex Screening Media Component Dimension mm [inch] Component Dimension mm [inch]
STM 27D END L < 1500 [59.1]
STM 3A-40 L = 3600 [141.73]
STM 27D END 1500 < L <1800
STM 1A-60 L = 3600 [141.73]
STM 27D END L > 1800 [70.9]
STM 27D MID. L < 1500 [59.1]
STM 3B-40 L = 3600 [141.73] STM 27D MID. 1500 < L < 1800
STM 27D MID. L > 1800 [70.9]

60 × 40 × 3 :3000
STM 3D-40 L = 3600 [141.73] STM 28A
[2.36 × 1.57 × 0.12 :118.1]

STM 1-60 L = 3600 [141.73] 80 × 40 x 3:3000


STM 28B
STM 1-95 L = 3600 [141.73] [3.15 × 1.57 × 0.12 :118.1]

STM 17-40 110 × 110 [4.3 × 4.3] 25 × 25 × 2:1350


STM 28D
STM 17-60 110 × 110 [4.3 × 4.3] [0.98 × 0.98 × 0.08 :118.1]

STM 19-40 110 × 110 [4.3 × 4.3]


Gripstrip 14 L = 1350 [53.1]
STM 19-60 110 × 110 [4.3 × 4.3]

STM 4-40 110 × 110 [4.3 × 4.3] Gripstrip


150 × 150 [5.9 × 5.9]
STM 4-60 110 × 110 [4.3 × 4.3] C 14-55V

STM 4B-40 110 × 110 [4.3 × 4.3] Gripstrip


150 × 150 [5.9 × 5.9]
STM 4B-60 110 × 110 [4.3 × 4.3] C 14-55H

STM 22B-40 110 × 110 [4.3 × 4.3] STM 9 L = 1350 [53.1]

STM 2-40 110 × 110 [4.3 × 4.3]


STM 8A L = 1350 [53.1]
STM 2-60 110 × 110 [4.3 × 4.3]

STM 20-40 130 × 130 [5.1 × 5.1]

STM 10A L = 3600 [4.3 × 4.3]

Std 1350 × 20000 ×2


AF 1350 × 20000 ×2
HT 1350 × 20000 ×2

[53.1 × 787.4 × 0.078]


Std: Standard dust sealing cloth, -40 to +50°C [-40 to +122°F] Picture 3. There are several ways to assemble a dust control system. Depending
AF: Anti-flame dust sealing cloth, -30 to +70°C [-22 to +158 °F] on the conditions, the profiles can easily be adapted for every type of screen.
HT: High temp. resistant dust sealing cloth, -30 to 130°C [-22 to +266°F] Contact Trellex Screening for a dust seal proposal.

The above information is a general description only, it is


not guaranteed and contains no warranties of any kind.

Subject to alteration without prior notice Data sheet No. TL16EN270904

You might also like