Hydraulic Crawler Crane

Model : CKS900

Max. Lifting Capacity: 100 t★ x 3.6 m / 90 t x 3.9 m*

Max. Crane Boom Length: 61.0 m
Max. Fixed Jib Combination: 51.8 m + 18.3 m
★
The value are theorical result.
* Auxiliary sheave is necessary.
1
CKS900
CONTENTS

3 SPECIFICATIONS

5 GENERAL DIMENSIONS

6 BOOM AND JIB ARRANGEMENTS

7 WORKING RANGES

10 SUPPLEMENTAL DATA

11 LIFTING CAPACITIES

16 SUPPLEMENTAL DATA FOR CLAMSHELL

17 LIFTING CAPACITIES

18 SUPPLEMENTAL DATA FOR REDUCED WEIGHTS

19 LIFTING CAPACITIES

20 SUPPLEMENTAL DATA FOR BARGE

21 LIFTING CAPACITIES

22 TRANSPORTATION PLAN

25 PARTS AND ATTACHMENTS

2
SPECIFICATIONS
Power Plant Load Hoisting System

Model: HINO J08E-VM Front and rear drums for load hoist powered by a hydraulic
Type: 4 cycle, water-cooled, vertical in-line 6, direct injection, variable plunger motors, driven through planetary reducers.
turbo-charger, intercooler Negative Brake: A spring-set, hydraulically released multiple-
Exhaust level is equivalent with NRMM (Europe) Stage III A disc brake is mounted on the hoist motor and operated through a
and/or US EPA Tier3. counter-balance valve. (Positive free fall brake is optional)
Displacement: 7,684 liters Drum Lock: External ratchet for locking drum
Rated power: 213 kW/2,100 min-1 Drums:
Max. Torque: 1,017 N·m/1,600 min-1 Front Drums:
Cooling System: Water-cooled 614 mm P.C.D x 617 mm wide drum, grooved for 26 mm wire
Starter: 24V-5kW rope. Rope capacity is 240 m working length and 360 m
Radiator: Corrugated type core, thermostatically controlled storage length.
Air cleaner: Dry type with replaceable paper element Rear Drum: 614 mm P.C.D x 617 mm, grooved for 26 mm
Throttle: Twist grip type hand throttle, electrically actuated wire rope. Rope capacity is 165 m working length and 360 m
Fuel filter: Replaceable paper element storage length.
Batteries: Two 12V x 136 Ah/5HR capacity batteries, series Diameter of wire rope
connected Main winch: 26 mm x 240 m
Fuel tank capacity: 400 liters Aux. winch: 26 mm x 165 m
Third winch: 22 mm x 145 m
Line Speed*:
Hydraulic System Hoisting/lowering: 120 to 3 m/min
Line Pull:
Main pumps: 3 variable displacement piston pumps Max. Line Pull*: 208 kN {21.2 ft}
Control: Full-flow hydraulic control system for infinitely variable (Referential performance)
pressure to all winches, propel and swing. Controls respond Rated Line Pull: 112 kN {11.4 ft}
instantly to the touch, delivering smooth function operation. *Single line on first drum layer
Cooling: Oil-to-air heat exchanger (plate-fin type)
Filtration: Full-flow and bypass type with replaceable element
Max. relief valve pressure: Swing System
Load hoist, boom hoist and propel system: 31.9 MPa
Swing system: 27.5 MPa Swing unit is powered by hydraulic motor driving spur gears
Control system: 5.4 MPa through planetary reducer, the swing system provides 360°
Hydraulic Tank Capacity: 440 liters rotation.
Swing parking brakes: A spring-set, hydraulically released
multiple-disc brake is mounted on swing motor.
Boom Hoisting System Swing circle: Single-row ball bearing with an integral internally
cut swing gear.
Powered by a hydraulic motor through a planetary reducer. Swing lock: Manually, four position lock for transportation
Brake: A spring-set, hydraulically released multiple-disc brake Swing Speed: 4.0 min-1
is mounted on the boom hoist motor and operated through a
counter-balance valve.
Drum Lock: External ratchet for locking drum Upper Structure
Drum: Single drum, grooved for 16 mm dia. wire rope
Line Speed: Single line on first drum layer Torsion-free precision machined upper frame. All components are
Hoisting/Lowering: 70 to 2 m/min located clearly and service friendly. Engine will with low noise level.
Boom hoisting/lowering: 16 mm x 150 m Counterweight: 31.9 ton
Boom guy line: 30 mm
Boom backstops: Required for all boom length

3
 Cab & Control Weight

Totally enclosed, full vision cab with safety glass, fully adjustable, Including upper and lower machine, 31.9 ton counterweight and
high backed seat with a headrest and armrests, and intermittent 14.4 ton carbody weight, basic boom (or basic boom + basic jib),
wiper and window washer (skylight and front window). hook, and other accessories.
Cab fittings: Weight: 90.1 ton
Air conditioner, convenient compartment (for tool), cup holder, Ground pressure: 101 kPa
cigarette lighter, sun visor, roof blind, tinted glass, floor mat,
footrest, and shoe tray
Attachment

Lower Structure Boom & Jib:

Welded lattice construction using tubular, high-tensile steel
Steel-welded carbody with axles. Crawler assemblies can be chords with pin connection between sections.
hydraulically extended for wide-track operation or retracted for
transportation. Crawler belt tension is maintained by hydraulic Boom and Jib length
jack force on the track-adjusting bearing block. Min. Length Max. Length
Carbodyweight: 14.4 ton (Min. combination) (Max. combination)
Crawler drive: Independent hydraulic propel drive is built into Crane Boom 12.2 m 61.0 m
each crawler side frame. Each drive consists of a hydraulic Fixed Iib 24.4 m + 9.1 m 51.8 m + 18.3 m
motor propelling a driving tumbler through a planetary gear box.
Hydraulic motor and gear box are built into the crawler side
frame within the shoe width.
Crawler brakes: Spring-set, hydraulically released parking
brakes are built into each propel drive.
Steering mechanism: A hydraulic propel system provides
both skid steering (driving one track only) and counter-rotating
steering (driving each track in opposite directions).
Track rollers : Sealed track rollers for maintenance -free
operation.
Shoe (flat): 800 mm wide each crawler
Max. gradeability: 40%

Main Specifications (Model: CKS900)

Crane Boom Hydraulic System
Max. Lifting Capacity 100 t ★ x 3.6 m / 90 t x 3.9 m *3 Main Pumps 3 variable displacement
Max. Length 61.0 m Max. Pressure 31.9 MPa {325 kgf/cm2}
Fixed Jib Hydraulic Tank Capacity 440 liters
Max. Lifting Capacity 10.9 t x 18.0 m Self-Removal Device
Max . Combination 51.8 m + 18.3 m Counterweight/self-removal device (Option)
Main & Aux. Winch Weight
Max. Line Speed (1st layer) 120 m/min Operating Weight 90.0 t *1
Rated Line Pull (Single line) 112 kN {11.4 tf} Ground Pressure 101.5 kPa
Wire Rope Diameter 26 mm Counterweight 31,900 kg
Wire Rope Length 240 m (Main), 165 m (Aux) Transport Weight 41,230 kg *2
Brake Type (free fall) Wet-type multiple disc brake (Optional) Units are SI units. { } indicates conventional units.
Working Speed Line speeds in table are for light loads. Line speed varies with load.
Swing Speed 4.0 min-1{rpm} *1 Including upper and lower machine, 31.9 ton counterweight, 14.4 ton carbody
weight, basic boom, hook, and other accessories.
Travel Speed 1.7/1.1 km/h
*2 Base machine with boom base, gantry, crawlers, and wire ropes (front/boom
Power Plant hoist)
Model HINO J08E-VM *3 Auxiliary sheave is must.
★ The value are theorical result.
Engine Output 213 kW/2100 min-1
Fuel Tank 400 liters

4
GENERAL DIMENSIONS
(Unit: mm)
3,500

800
500
R4,

0
,20
12
OM
BO
5,140 IC
BAS
3,160 1,100

2,990
1,495
940
6,190

1,850
3,310

390
1,770
1,110

5,440 3,500
6,280 (CRAWLER RETRACTED)
5,130
(CRAWLER EXTENDED)

This catalog may contain photographs of machines with specifications, attachments and optional equipment.

Limit of Hook Lifting

L Hook L L’
90 t hook 4.1 m
70 t hook 4.1 m
50 t hook 4.0 m Hook L’
35 t hook 3.9 m Ball hook 3.5 m

5
BOOM AND JIB ARRANGEMENTS
Crane Boom Arrangements
Boom Boom
Boom arrangement Boom arrangement
length m (ft) length m (ft)

12.2 (40) ※
42.7 (140)
15.2 (50)

※ 45.7 (150) ※
18.3 (60)

※
21.3 (70) ※ 48.8 (160)

※
24.4 (80) ※
51.8 (170)

※ ※
27.4 (90)
54.9 (180)
3.0

※
30.5 (100) 57.9 (190) ※

61.0 (200) ※
33.5 (110) ※

Symbol Boom Length Remarks

※ 5.8 m Boom Base
36.6 (120) 6.4 m Boom Tip
3.0 3.0 m Insert Boom
6.1 6.1 m Insert Boom
※ 12.2 12.2 m Insert Boom
39.6 (130)
12.2A 12.2 m Insert Boom with lug
Mark shows the boom insert with lugs attached
Mark shows the boom insert with lugs attached and the
※ guy line installing position when the fixed jib is used.
Mark shows the standard boom arrangement which
make the boom arrangement of less than the each
※ boom length possible.
Mark shows the installing of the cable roller for the
insert boom.

Fixed Jib Arrangements

Fixed Jib
Jib length
Crane boom length Jib arrangement
m (ft)

9.1 (30) 4.6 4.6

12.2 (40) 3.0 Symbol Jib Length Remarks

Boom 24.4 m to 51.8 m 4.6 m Jib Base
15.2 (50) 6.1
4.6 m Jib Tip
3.0 3.0 m Insert Jib
18.3 (60) 6.1 3.0
6.1 6.1 m Insert Jib

6
WORKING RANGES
Crane Boom

82˚ 75˚ 70˚ 65˚ 60˚ 55˚

65
61.0 m Boom
50˚
57.9 m Boom 60

54.9 m Boom

55
51.8 m Boom
45˚
48.8 m Boom
50
45.7 m Boom

42.7 m Boom 45
40˚

39.6 m Boom

40
36.6 m Boom

Height above ground (m)

35˚
33.5 m Boom
35
30.5 m Boom
30˚
27.4 m Boom 30

24.4 m Boom
25
21.3 m Boom

18.3 m Boom
20

15.2 m Boom

12.2 m Boom
1.77 m

10 15 20 25 30 35 40 45 50

Radius from center of rotation (m)

Center of
rotation
1.1 m

7
Fixed Jib 10°

10°
75
80°
51.8m Boom + 18.3m Jib

51.8m Boom + 15.2m Jib 70

51.8m Boom + 12.2m Jib

65
51.8m Boom + 9.1m Jib

60

55

50

24.4m Boom + 18.3m Jib 45

24.4m Boom + 15.2m Jib

Height above ground (m)

40
24.4m Boom + 12.2m Jib

24.4m Boom + 9.1m Jib

35

30

25

20

15

10
1.77m

5
5 10 15 20 25 30 35 40 45 50 55

Center of Radius from center of rotation (m)

rotation
1.1m

8
WORKING RANGES
Fixed Jib 30°

78° 30°

75

51.8m Boom + 18.3m Jib

70
51.8m Boom + 15.2m Jib

51.8m Boom + 12.2m Jib 65

51.8m Boom + 9.1m Jib

60

55

50

45
24.4m Boom + 18.3m Jib

24.4m Boom + 15.2m Jib

Height above ground (m)

40
24.4m Boom + 12.2m Jib

24.4m Boom + 9.1m Jib 35

30

25

20

15

10
1.77m

5
5 10 15 20 25 30 35 40 45 50 55

Radius from center of rotation (m)

Center of
rotation
1.1m

9
SUPPLEMENTAL DATA
• Ratings according to EN13000. <Reference Information>
• Operating radius is the horizontal distance from centerline of Main hoist loads
rotation to a vertical line through the center of gravity of the No. of Parts of Line 1 2 3 4 5
load. Maximum Loads (kN) 112 224 335 447 559
• Deduct weight of hook block (s), slings and all other load Maximum Loads (t) 11.4 22.8 34.2 45.6 57.0
handling accessories from main boom ratings shown.
• Ratings shown are based on freely suspended loads and make No. of Parts of Line 6 7 8
no allowance for such factors as wind effect on lifted load, Maximum Loads (kN) 671 779 883
ground conditions, out-of-level, operating speeds or any other Maximum Loads (t) 68.4 79.4 90.0
condition that could be detrimental to the safe operation of this
equipment. Auxiliary hoist loads
• The operator, therefore, has the responsibility to judge the No. of Parts of Line 1
existing conditions and reduce lifted loads and operating Maximum Loads (kN) 108
speeds accordingly. Maximum Loads (t) 11.0
• Ratings are for operation on a firm and level surface, up to 1%
gradient. Weight of hook block
• At radii and boom lengths where no ratings are shown on Hook Block 90 t 70 t 50 t 35 t Ball Hook
chart, operation is not intended nor approved. Weight (t) 1.3 0.9 0.85 0.7 0.3
• Boom inserts and guy lines must be arranged as shown in the
"operator's manual". Operation of this equipment in excess of rated loads
• Boom hoist reeving is 12 part line. or disregard of instruction voids the warranty.
• Gantry must be in raised position for all conditions.
• Boom backstops are required for all boom lengths. Assembling the counterweight
• The boom should be erected over the front of the crawlers, not 31.9 ton counterweight
laterally. 14.4 ton carbody weight
(Standard type)
• Ratings inside of boxes are limited by strength of
No.4 No.5
materials.
No.3
• The minimum rated load is 1.4 (ton).
No.2
• Crawler frames must be fully extended for all crane operations.
No.1
Counterweights
(Crane boom lifting)
• The total load that can be lifted is the value for weight of main
hook block, slings, and all other load handling accessories
Carbody weights
deducted from crane boom ratings shown.

(Fixed jib lifting) Assembling the counterweight

• The total load that can be lifted is the value for weight of jib (Equipped with self removal device)
hook block, slings, and all other load handling accessories 31.3 ton counterweight
14.4 ton carbody weight
deducted from fixed jib ratings shown.
(Optional type)
• The availability of fixed jib mounting No.4 No.5
- On crane boom : Range 24.4 m to 51.8 m. No.2 No.3
No.1
Counterweights

Carbody weights

• The lifting capacity does not change due to the type of

counterweights (standard or optional).

10
LIFTING CAPACITIES
Counterweight: 31.9 t
Crane Boom Lifting Capacities Carbody Weight: 14.4 t
Unit: metric ton
Boom Boom
length length
Working (m) 12.2 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 39.6 (m) Working
radius (m) radius (m)
★
3.6 100.0 3.6
3.9 90.0 89.9 89.7 3.9
4.0 89.0 88.9 88.7 4.3m/68.4 4.0
4.5 79.6 79.5 79.4 68.4 4.7m/68.4 4.5
5.0 72.1 71.9 71.8 68.4 67.6 5.1m/57.0 5.0
5.5 65.8 65.7 65.5 63.6 60.6 57.0 5.6m/54.0 5.5
6.0 60.5 60.3 59.9 57.5 54.9 52.7 50.5 45.6 6.4m/41.9 6.8m/34.2 6.0
7.0 48.6 48.5 48.4 48.1 46.2 44.5 42.9 41.5 40.0 34.2 7.0
8.0 39.9 39.8 39.7 39.9 39.8 38.5 37.2 36.1 35.0 33.9 8.0
9.0 33.8 33.7 33.6 33.8 33.6 33.6 32.8 31.9 31.0 30.1 9.0
10.0 29.3 29.2 29.1 29.2 29.1 29.0 28.9 28.5 27.7 27.0 10.0
12.0 11.8m/22.9 22.9 22.8 22.9 22.8 22.7 22.6 22.6 22.5 22.3 12.0
14.0 18.8 18.6 18.8 18.6 18.5 18.4 18.4 18.3 18.3 14.0
16.0 14.4m/18.1 15.7 15.8 15.7 15.6 15.5 15.4 15.3 15.3 16.0
18.0 17.0m/14.5 13.7 13.5 13.4 13.3 13.2 13.1 13.1 18.0
20.0 19.6m/12.2 11.8 11.7 11.6 11.5 11.4 11.4 20.0
22.0 10.5 10.4 10.2 10.2 10.0 10.0 22.0
24.0 22.3m/10.3 9.3 9.1 9.1 8.9 8.9 24.0
26.0 24.9m/8.8 8.2 8.2 8.0 8.0 26.0
28.0 27.6m/7.6 7.4 7.2 7.2 28.0
30.0 6.8 6.6 6.5 30.0
32.0 30.2m/6.7 6.0 6.0 32.0
34.0 32.9m/5.8 5.5 34.0
36.0 35.5m/5.1 36.0
Reeves 8 8 8 6 6 5 5 4 4 4 Reeves

Boom Boom
length length
Working (m) 42.7 45.7 48.8 51.8 54.9 57.9 61.0 (m) Working
radius (m) radius (m)

7.0 7.3m/31.9 7.7m/28.0 7.0

8.0 31.4 27.8 8.1m/22.1 8.5m/19.2 8.0
9.0 29.2 26.2 20.8 18.6 16.2 9.4m/13.9 9.8m/11.8 9.0
10.0 26.2 24.5 19.5 17.4 15.2 13.4 11.7 10.0
12.0 21.7 21.2 17.3 15.4 13.3 11.7 10.2 12.0
14.0 18.1 18.0 15.5 13.8 11.9 10.4 9.0 14.0
16.0 15.2 15.1 14.1 12.4 10.7 9.3 8.0 16.0
18.0 12.9 12.9 12.8 11.4 9.7 8.4 7.2 18.0
20.0 11.2 11.2 11.1 10.4 8.9 7.6 6.5 20.0
22.0 9.9 9.8 9.8 9.6 8.1 7.0 5.9 22.0
24.0 8.7 8.7 8.6 8.5 7.5 6.4 5.4 24.0
26.0 7.8 7.7 7.7 7.6 6.9 5.9 4.9 26.0
28.0 7.0 7.0 6.9 6.8 6.4 5.4 4.5 28.0
30.0 6.4 6.3 6.3 6.1 6.0 5.0 4.1 30.0
32.0 5.8 5.7 5.7 5.6 5.4 4.6 3.8 32.0
34.0 5.3 5.2 5.1 5.0 4.9 4.3 3.4 34.0
36.0 4.8 4.8 4.7 4.6 4.4 4.0 3.2 36.0
38.0 4.4 4.4 4.2 4.1 4.0 3.6 2.9 38.0
40.0 38.1m/4.4 4.0 3.9 3.8 3.6 3.3 2.6 40.0
44.0 40.8m/3.9 43.4m/3.3 3.1 3.0 2.8 2.1 44.0
48.0 46.1m/2.8 2.5 2.2 1.7 48.0
52.0 48.7m/2.4 51.4m/1.8 52.0
Reeves 4 4 2 2 2 2 2 Reeves

Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
★ The value are theorical result.

11
 Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 31.9 t
Carbody Weight: 14.4 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 24.4 27.4 30.5 Boom length (m)

Jib length (m) 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 Jib length (m)

9.0 10.9 9.0

10.0 10.9 10.9 10.9 10.0
12.0 10.9 10.9 9.0 10.9 10.9 9.0 10.9 10.9 12.0
14.0 10.9 10.9 9.0 8.1 10.9 10.9 9.0 8.1 10.9 10.9 9.0 8.1 14.0
16.0 10.9 10.5 8.7 7.7 10.9 10.9 9.0 7.9 10.9 10.9 9.0 8.1 16.0
18.0 10.9 9.5 7.8 6.8 10.9 10.2 8.3 7.2 10.9 10.6 8.7 7.5 18.0
20.0 10.3 8.6 7.1 6.2 10.2 9.2 7.5 6.5 10.1 9.7 7.9 6.8 20.0
22.0 9.0 7.8 6.5 5.6 8.9 8.4 6.9 5.9 8.8 8.9 7.2 6.2 22.0
Working radius (m)

Working radius (m)

24.0 8.0 7.2 5.9 5.1 7.9 7.7 6.3 5.4 7.8 8.0 6.6 5.7 24.0
26.0 7.2 6.7 5.5 4.7 7.1 7.1 5.8 5.0 7.0 7.1 6.2 5.3 26.0
28.0 6.5 6.2 5.1 4.4 6.4 6.5 5.4 4.6 6.3 6.4 5.7 4.9 28.0
30.0 5.9 5.8 4.8 4.1 5.8 5.9 5.1 4.3 5.7 5.8 5.4 4.6 30.0
32.0 5.5 4.5 3.8 5.3 5.4 4.8 4.1 5.2 5.3 5.1 4.3 32.0
34.0 4.2 3.6 4.9 4.5 3.8 4.7 4.8 4.8 4.0 34.0
36.0 3.4 4.3 3.6 4.4 4.5 3.8 36.0
38.0 3.2 4.1 3.4 4.0 4.1 3.6 38.0
40.0 3.2 3.8 3.4 40.0
42.0 3.3 42.0
44.0 3.1 44.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves

Boom length (m) 33.5 36.6 39.6 Boom length (m)

Jib length (m) 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 Jib length (m)

12.0 10.9 10.9 10.9 10.9 12.0

14.0 10.9 10.9 9.0 8.1 10.9 10.9 9.0 10.9 10.9 9.0 14.0
16.0 10.9 10.9 9.0 8.1 10.9 10.9 9.0 8.1 10.9 10.9 9.0 8.1 16.0
18.0 10.9 10.9 9.0 7.8 10.9 10.9 9.0 8.1 10.9 10.9 9.0 8.1 18.0
20.0 10.0 10.1 8.3 7.1 9.9 10.0 8.6 7.4 9.8 9.9 9.0 7.7 20.0
22.0 8.7 8.8 7.6 6.5 8.6 8.7 8.0 6.8 8.5 8.6 8.2 7.0 22.0
24.0 7.8 7.8 7.0 6.0 7.5 7.7 7.3 6.2 7.4 7.6 7.7 6.5 24.0
26.0 7.0 7.0 6.5 5.5 6.7 6.9 6.8 5.8 6.6 6.8 6.9 6.0 26.0
Working radius (m)

Working radius (m)

28.0 6.2 6.3 6.0 5.1 6.1 6.2 6.2 5.4 6.0 6.1 6.1 5.6 28.0
30.0 5.6 5.7 5.6 4.8 5.5 5.5 5.7 5.0 5.4 5.4 5.6 5.2 30.0
32.0 5.1 5.2 5.2 4.5 5.0 5.0 5.1 4.7 4.8 4.9 5.0 4.9 32.0
34.0 4.7 4.7 4.8 4.2 4.5 4.6 4.7 4.4 4.4 4.5 4.5 4.6 34.0
36.0 4.2 4.3 4.4 4.0 4.1 4.2 4.2 4.2 4.0 4.1 4.1 4.2 36.0
38.0 3.9 4.0 4.0 3.8 3.8 3.8 3.9 3.9 3.7 3.7 3.8 3.8 38.0
40.0 3.7 3.7 3.6 3.4 3.5 3.6 3.6 3.3 3.4 3.4 3.5 40.0
42.0 3.4 3.4 3.2 3.3 3.3 3.0 3.1 3.2 3.2 42.0
44.0 3.2 3.0 3.1 2.7 2.9 2.9 44.0
46.0 2.8 2.6 2.7 46.0
48.0 2.4 2.2 2.4 48.0
50.0 2.1 50.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves

Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.

12
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 31.9 t
Carbody Weight: 14.4 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 42.7 45.7 48.8 Boom length (m)

Jib length (m) 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 Jib length (m)

14.0 10.9 10.9 10.9 10.9 10.9 14.0

16.0 10.9 10.9 9.0 10.9 10.9 9.0 10.9 10.9 16.0
18.0 10.9 10.9 9.0 8.1 10.8 10.9 9.0 8.1 10.8 10.9 9.0 8.1 18.0
20.0 9.6 9.8 9.0 7.9 9.5 9.6 9.0 8.1 9.5 9.6 9.0 8.1 20.0
22.0 8.4 8.5 8.5 7.3 8.3 8.4 8.5 7.6 8.2 8.4 8.5 7.8 22.0
24.0 7.3 7.5 7.6 6.7 7.2 7.4 7.5 7.0 7.2 7.3 7.4 7.2 24.0
26.0 6.5 6.7 6.7 6.3 6.4 6.5 6.7 6.5 6.3 6.5 6.6 6.7 26.0
28.0 5.8 5.9 6.0 5.8 5.7 5.8 5.9 6.0 5.7 5.8 5.9 5.9 28.0
Working radius (m)

Working radius (m)

30.0 5.2 5.3 5.4 5.4 5.1 5.2 5.3 5.4 5.1 5.2 5.2 5.3 30.0
32.0 4.7 4.8 4.9 4.9 4.6 4.7 4.8 4.8 4.6 4.6 4.7 4.8 32.0
34.0 4.3 4.3 4.4 4.5 4.2 4.2 4.3 4.4 4.1 4.2 4.3 4.3 34.0
36.0 3.8 3.9 4.0 4.0 3.7 3.8 3.9 3.9 3.7 3.8 3.8 3.9 36.0
38.0 3.5 3.6 3.6 3.7 3.5 3.5 3.5 3.6 3.4 3.4 3.5 3.5 38.0
40.0 3.2 3.3 3.3 3.3 3.1 3.2 3.2 3.3 3.0 3.1 3.2 3.2 40.0
42.0 2.9 3.0 3.0 3.1 2.8 2.9 2.9 3.0 2.8 2.8 2.9 2.9 42.0
44.0 2.5 2.7 2.8 2.8 2.5 2.6 2.7 2.7 2.5 2.5 2.6 2.6 44.0
46.0 2.2 2.3 2.5 2.6 2.2 2.3 2.4 2.5 2.2 2.2 2.4 2.4 46.0
48.0 2.0 2.2 2.3 1.8 2.0 2.1 2.2 1.8 1.9 2.1 2.1 48.0
50.0 1.9 2.0 1.7 1.8 1.9 1.4 1.6 1.8 1.9 50.0
52.0 1.7 1.6 1.7 1.5 1.6 52.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves

Boom length (m) 51.8

Jib length (m) 9.1 12.2 15.2 18.3
14.0 10.9
16.0 10.9 10.9
18.0 10.7 10.8 9.0 8.1
20.0 9.4 9.5 9.0 8.1
22.0 8.1 8.3 8.3 8.0
24.0 7.1 7.2 7.3 7.4
26.0 6.2 6.4 6.5 6.6
28.0 5.6 5.7 5.8 5.8
Working radius (m)

30.0 5.0 5.1 5.1 5.2

32.0 4.4 4.5 4.6 4.7
34.0 4.0 4.1 4.2 4.2
36.0 3.6 3.6 3.7 3.8
38.0 3.3 3.3 3.4 3.4
40.0 2.9 3.0 3.0 3.1
42.0 2.7 2.7 2.8 2.8
44.0 2.3 2.4 2.5 2.5
46.0 2.1 2.1 2.2 2.3
48.0 1.7 1.8 1.9 2.0
50.0 1.5 1.6 1.7
52.0 1.5
Reeves 1 1 1 1

Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.

13
 Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 31.9 t
Carbody Weight: 14.4 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 24.4 27.4 30.5 Boom length (m)

Jib length (m) 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 Jib length (m)

12.0 9.5 12.0

14.0 9.3 6.9 9.4 9.5 14.0
16.0 8.6 6.4 8.9 6.5 9.0 6.7 16.0
18.0 8.0 5.9 4.8 8.3 6.1 4.9 8.6 6.2 5.0 18.0
20.0 7.5 5.6 4.5 3.8 7.8 5.7 4.6 3.9 8.0 5.9 4.7 3.9 20.0
Working radius (m)

Working radius (m)

22.0 7.1 5.3 4.2 3.6 7.4 5.4 4.3 3.6 7.6 5.6 4.4 3.7 22.0
24.0 6.8 5.0 4.0 3.4 7.0 5.1 4.1 3.4 7.3 5.3 4.2 3.5 24.0
26.0 4.8 3.8 3.2 4.9 3.9 3.2 7.0 5.1 4.0 3.3 26.0
28.0 3.6 3.0 4.7 3.7 3.0 6.4 4.9 3.8 3.1 28.0
30.0 3.5 2.9 3.6 2.9 4.7 3.7 3.0 30.0
32.0 2.8 3.5 2.8 3.6 2.9 32.0
34.0 2.7 2.8 34.0
36.0 2.7 36.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves

Boom length (m) 33.5 36.6 39.6 Boom length (m)

Jib length (m) 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 Jib length (m)

14.0 9.5 9.5 14.0

16.0 9.3 6.8 9.4 9.5 16.0
18.0 8.8 6.4 9.0 6.5 9.2 6.6 18.0
20.0 8.3 6.1 4.8 4.0 8.5 6.2 4.9 4.1 8.8 6.3 4.9 20.0
22.0 7.9 5.7 4.5 3.8 8.1 5.9 4.6 3.9 8.3 6.0 4.7 3.9 22.0
24.0 7.5 5.5 4.3 3.6 7.7 5.6 4.4 3.7 7.7 5.7 4.5 3.7 24.0
Working radius (m)

Working radius (m)

26.0 7.1 5.2 4.1 3.4 7.0 5.4 4.2 3.5 6.9 5.5 4.3 3.5 26.0
28.0 6.4 5.0 3.9 3.2 6.2 5.1 4.0 3.3 6.1 5.2 4.1 3.3 28.0
30.0 5.7 4.8 3.8 3.1 5.6 4.9 3.8 3.2 5.5 5.1 3.9 3.2 30.0
32.0 4.7 3.7 3.0 5.1 4.8 3.7 3.1 5.0 4.9 3.8 3.1 32.0
34.0 3.5 2.9 4.6 3.6 3.0 4.6 3.7 3.0 34.0
36.0 2.8 3.5 2.9 4.1 3.6 2.9 36.0
38.0 2.7 3.4 2.8 3.5 2.8 38.0
40.0 2.7 2.7 40.0
42.0 2.6 42.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves

Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.

14
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 31.9 t
Carbody Weight: 14.4 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 42.7 45.7 48.8 Boom length (m)

Jib length (m) 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 9.1 12.2 15.2 18.3 Jib length (m)

16.0 9.5 9.5 16.0

18.0 9.4 6.7 9.5 9.5 18.0
20.0 8.9 6.4 5.1 9.1 6.5 5.1 9.2 6.6 5.1 20.0
22.0 8.4 6.1 4.8 4.0 8.4 6.2 4.9 4.0 8.5 6.3 4.9 4.1 22.0
24.0 7.6 5.8 4.6 3.8 7.6 5.9 4.7 3.8 7.5 6.0 4.7 3.9 24.0
26.0 6.7 5.6 4.4 3.6 6.6 5.7 4.5 3.7 6.6 5.8 4.5 3.7 26.0
28.0 6.0 5.4 4.2 3.4 5.9 5.5 4.3 3.5 5.9 5.6 4.3 3.6 28.0
Working radius (m)

Working radius (m)

30.0 5.3 5.2 4.0 3.3 5.3 5.3 4.1 3.3 5.2 5.4 4.1 3.4 30.0
32.0 4.8 5.0 3.9 3.2 4.8 4.9 4.0 3.2 4.7 4.9 4.0 3.3 32.0
34.0 4.4 4.5 3.8 3.1 4.3 4.4 3.9 3.1 4.2 4.4 3.9 3.2 34.0
36.0 3.9 4.1 3.7 3.0 3.9 4.0 3.7 3.0 3.9 3.9 3.8 3.1 36.0
38.0 3.7 3.6 2.9 3.5 3.6 3.6 2.9 3.5 3.6 3.7 3.0 38.0
40.0 3.5 2.8 3.4 2.8 3.2 3.4 2.9 40.0
42.0 2.7 3.1 2.7 2.9 3.0 2.8 42.0
44.0 2.6 2.7 2.7 2.7 44.0
46.0 2.6 46.0
48.0 2.3 48.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves

Boom length (m) 51.8

Jib length (m) 9.1 12.2 15.2 18.3
18.0 9.5
20.0 9.3 6.6
22.0 8.5 6.4 5.0
24.0 7.5 6.1 4.8 3.9
26.0 6.6 5.9 4.6 3.8
28.0 5.9 5.7 4.4 3.6
30.0 5.2 5.4 4.2 3.5
Working radius (m)

32.0 4.7 4.8 4.1 3.4

34.0 4.2 4.3 4.0 3.3
36.0 3.7 3.8 3.9 3.2
38.0 3.3 3.5 3.6 3.1
40.0 3.0 3.2 3.3 3.0
42.0 2.9 3.0 2.9
44.0 2.6 2.7 2.6
46.0 2.4 2.4
48.0 2.2
50.0 2.0
Reeves 1 1 1 1

Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.

15
SUPPLEMENTAL DATA FOR CLAMSHELL RATING CHART
• Operating radius is the horizontal distance from centerline of (Clamshell bucket lifting)
rotation to a vertical line through the center of gravity of the • The total load that can be lifted is the value for weight of
load. bucket, slings, and all other load handling accessories
• Deduct weight of bucket, slings and all other load handling deducted from main boom ratings shown.
accessories from main boom ratings shown. • The weight of bucket and materials must not exceed rated
• Ratings shown are based on freely suspended loads and make load.
no allowance for such factors as wind effect on lifted load, • Optimum bucket should be required according to material.
ground conditions, out-of-level, operating speeds or any other Bucket capacity (m3) x specified gravity of material (ton/m3) +
condition that could be detrimental to the safe operation of bucket weight (ton) = rated load.
this equipment. The operator, therefore, has the responsibility • Bucket weight must also be decreased according to operating
to judge the existing conditions and reduce lifted loads and cycle and bucket lowering height.
operating speeds accordingly. • Rated loads are determined by stability and boom strength.
• Rated loads do not exceed 66% of minimum tipping loads. During simultaneous operations of boom and swing, rapid
• Ratings are for operation on a firm and level surface, up to 1% acceleration or deceleration must be avoided.
gradient. • Do not attempt to cast the bucket while swinging or diagonal
• At radii and boom lengths where no ratings are shown on draw-cutting.
chart, operation is not intended nor approved.
• Boom inserts and guy lines must be arranged as shown in the <Reference Information>
"operator's manual". Main hoist loads
• Boom hoist reeving is 12 part line. No. of Parts of Line 1
• Gantry must be in raised position for all conditions. Maximum Loads (kN) 98
• Boom backstops are required for all boom lengths. Maximum Loads (t) 10.0
• The boom should be erected over the front of the crawlers, not
laterally. Assembling the counterweight
• Crawler frames must be fully extended for all crane operations. 20.5 ton counterweight
without carbody weight
(Standard type)

No.2
No.1
Counterweights

Carbody weights

Assembling the counterweight

(Equipped with self removal device)
19.8 ton counterweight
without carbody weight
(Optinal type)

No.2 No.3
No.1
Counterweights

Carbody weights

• The lifting capacity does not change due to the type of

counterweights. (Standard or optinal)

Operation of this equipment in excess of rated loads

or disregard of instruction voids the warranty.

16
LIFTING CAPACITIES
Clamshell Rating Charts Counterweight: 20.5 t
Without Carbody Weight
Crane Boom Capacities Crawler Fully Extended
Unit: metric ton
Boom Boom
length length
Load (m) 12.2 15.2 18.3 21.3 24.4 (m) Load
radius (m) radius (m)

5.0 10.0 5.0

6.0 10.0 10.0 6.0
7.0 10.0 10.0 10.0 7.0
8.0 10.0 10.0 10.0 9.5 8.0
9.0 10.0 10.0 10.0 9.5 8.7 9.0
10.0 9.8 9.7 9.6 9.5 8.7 10.0
11.0 9.1 9.0 8.9 8.8 8.7 11.0
12.0 8.3 8.2 8.1 8.0 12.0
13.0 7.7 7.6 7.5 7.4 13.0
14.0 7.1 7.0 6.9 6.8 14.0
15.0 6.5 6.4 6.3 15.0
16.0 6.1 6.0 5.9 16.0
17.0 5.7 5.6 17.0
18.0 5.4 5.3 18.0
19.0 5.2 5.1 19.0
20.0 4.9 20.0
21.0 4.7 21.0
22.0 22.0
23.0 23.0
24.0 24.0
25.0 25.0
26.0 26.0
27.0 27.0
28.0 28.0
29.0 29.0
30.0 30.0
Reeves 1 1 1 1 1 Reeves

Note:
Please refer rated chart in operator’s cabin.

17
SUPPLEMENTAL DATA FOR REDUCED WEIGHTS RATING CHART
• Ratings according to EN13000. Assembling the counterweight
• Operating radius is the horizontal distance from centerline of 20.5 ton counterweight
rotation to a vertical line through the center of gravity of the without carbody weight
(Standard type)
load.
• Deduct weight of hook block (s), slings and all other load
handling accessories from main boom ratings shown.
No.2
• Ratings shown are based on freely suspended loads and make
No.1
no allowance for such factors as wind effect on lifted load,
Counterweights
ground conditions, out-of-level, operating speeds or any other
condition that could be detrimental to the safe operation of
this equipment. The operator, therefore, has the responsibility
Carbody weights
to judge the existing conditions and reduce lifted loads and
operating speeds accordingly.
• Ratings are for operation on a firm and level surface, up to 1% Assembling the counterweight
gradient. (Equipped with self removal device)
• At radii and boom lengths where no ratings are shown on 19.8 ton counterweight
chart, operation is not intended nor approved. without carbody weight
(Optinal type)
• Boom inserts and guy lines must be arranged as shown in the
"operator's manual".
No.2 No.3
• Boom hoist reeving is 12 part line.
No.1
• Gantry must be in raised position for all conditions.
Counterweights
• Boom backstops are required for all boom lengths.
• The boom should be erected over the front of the crawlers, not
laterally.
Carbody weights
• Ratings inside of boxes are limited by strength of
materials.
• The minimum rated load is 1.4 (ton). • The lifting capacity does not change due to the type of
• Crawler frames must be fully extended for all crane operations. counterweights (standard or optinal).

(Crane boom lifting) <Reference Information>

• The total load that can be lifted is the value for weight of hook Main hoist loads
block, slings, and all other load handling accessories deducted No. of Parts of Line 1 2 3 4 5
from main boom ratings shown. Maximum Loads (kN) 112 224 335 447 559
Maximum Loads (t) 11.4 22.8 34.2 45.6 57.0
Boom length
Counterweight Carbody weight
Without aux. With aux. No. of Parts of Line 6 7 8
20.5 ton Without 12.2 m to 57.9 m 12.2 m to 54.9 m Maximum Loads (kN) 671 779 883
19.8 ton Without 12.2 m to 57.9 m 12.2 m to 54.9 m Maximum Loads (t) 68.4 79.4 90.0

Auxiliary hoist loads

No. of Parts of Line 1
Maximum Loads (kN) 108
Maximum Loads (t) 11.0

Weight of hook block

Hook Block 90 t 70 t 50 t 35 t Ball Hook
Weight (t) 1.3 0.9 0.85 0.7 0.3

Operation of this equipment in excess of rated loads

or disregard of instruction voids the warranty.

18
LIFTING CAPACITIES
Reduced Weights Rating Charts Counterweight: 20.5 t
Without Carbody Weight
Crane Boom Lifting Capacities Crawler Fully Extended
Unit: metric ton
Boom Boom
length length
Load (m) 12.2 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 39.6 (m) Load
radius (m) radius (m)

3.9 81.2 77.3 71.4 3.9

4.0 80.2 74.6 69.0 4.3m/59.0 4.0
4.5 67.1 63.2 59.1 55.8 4.7m/49.9 4.5
5.0 54.8 54.8 51.6 49.0 46.4 5.1m/42.2 5.0
5.5 46.2 46.2 45.8 43.7 41.6 39.7 5.6m/37.1 5.5
6.0 40.0 39.9 39.7 39.4 37.6 36.0 34.5 33.1 6.4m/29.8 6.8m/26.9 6.0
7.0 31.3 31.2 31.1 30.9 30.6 30.3 29.2 28.2 27.1 26.2 7.0
8.0 25.7 25.6 25.4 25.4 25.4 25.3 25.2 24.4 23.6 22.8 8.0
9.0 21.7 21.6 21.4 21.4 21.4 21.4 21.3 21.3 20.8 20.1 9.0
10.0 18.8 18.6 18.5 18.5 18.5 18.5 18.4 18.3 18.2 18.0 10.0
12.0 11.8m/15.0 14.5 14.4 14.4 14.4 14.3 14.2 14.2 14.0 13.9 12.0
14.0 11.9 11.7 11.7 11.7 11.6 11.5 11.4 11.3 11.2 14.0
16.0 14.4m/11.5 9.8 9.8 9.8 9.7 9.6 9.5 9.4 9.3 16.0
18.0 17.0m/9.0 8.4 8.3 8.3 8.1 8.1 7.9 7.8 18.0
20.0 19.6m/7.6 7.2 7.1 7.0 6.9 6.8 6.7 20.0
22.0 6.4 6.3 6.1 6.1 5.9 5.8 22.0
24.0 22.3m/6.3 5.6 5.4 5.3 5.2 5.1 24.0
26.0 24.9m/5.3 4.8 4.8 4.6 4.5 26.0
28.0 27.6m/4.4 4.3 4.1 4.0 28.0
30.0 3.8 3.7 3.6 30.0
32.0 30.2m/3.8 3.3 3.2 32.0
34.0 32.9m/3.2 2.9 34.0
36.0 35.5m/2.7 36.0
38.0 38.0
40.0 40.0
44.0 44.0
Reeves 8 8 8 6 5 4 4 4 4 4 Reeves

Boom Boom
length length
Load (m) 42.7 45.7 48.8 51.8 54.9 57.9 (m) Load
radius (m) radius (m)

4.5 4.5
5.0 5.0
5.5 5.5
6.0 6.0
7.0 7.3m/24.1 7.7m/22.2 7.0
8.0 22.0 21.4 8.1m/19.8 8.5m/17.2 8.0
9.0 19.5 18.9 18.3 16.6 14.5 9.4m/12.5 9.0
10.0 17.4 16.9 16.4 15.5 13.5 11.9 10.0
12.0 13.8 13.7 13.5 13.1 11.9 10.4 12.0
14.0 11.1 11.1 11.1 11.0 10.6 9.3 14.0
16.0 9.1 9.1 9.1 9.0 8.9 8.3 16.0
18.0 7.7 7.7 7.7 7.6 7.5 7.4 18.0
20.0 6.6 6.6 6.5 6.4 6.3 6.3 20.0
22.0 5.7 5.7 5.6 5.5 5.4 5.4 22.0
24.0 4.9 4.9 4.9 4.8 4.7 4.6 24.0
26.0 4.3 4.3 4.3 4.2 4.1 4.0 26.0
28.0 3.8 3.8 3.8 3.7 3.6 3.5 28.0
30.0 3.4 3.4 3.4 3.3 3.1 3.0 30.0
32.0 3.1 3.1 3.0 2.9 2.7 2.6 32.0
34.0 2.7 2.7 2.6 2.5 2.3 2.3 34.0
36.0 2.4 2.4 2.3 2.2 2.0 1.9 36.0
38.0 2.1 2.1 2.0 1.9 1.7 1.7 38.0
40.0 38.1m/2.1 1.9 1.8 1.6 1.5 1.4 40.0
44.0 40.8m/1.8 43.4m/1.4 44.0
48.0 48.0
52.0 52.0
Reeves 4 2 2 2 2 2 Reeves

Ratings according to EN13000.

Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.

19
SUPPLEMENTAL DATA FOR BARGE RATING CHART
• Operating radius is the horizontal distance from centerline of (Crane boom lifting)
rotation to a vertical line through the center of gravity of the • The total load that can be lifted is the value for weight of hook
load. block, slings, and all other load handling accessories deducted
• Deduct weight of hook block (s), slings and all other load from main boom ratings shown.
handling accessories from main boom ratings shown.
• Condition of barge stability this rating chart were determined <Reference Information>
under the condition below. The stability of barge shall meet Main hoist loads
below condition. During operation the machinery static No. of Parts of Line 1 2 3 4 5
inclination against horizontal level. Maximum Loads (kN) 112 224 335 447 490
(A) Both sides (right & left) of machine Maximum Loads (t) 11.4 22.8 34.2 45.6 50.0
Maximum inclination shall be within 1.5 degrees
(B) Front & backward of macine Auxiliary hoist loads
Maximum inclination shall be within 3.0 degrees No. of Parts of Line 1
Maximum Loads (kN) 108
Direction of Right and Left Maximum Loads (t) 11.0
for Machinery

Weight of hook block

Hook Block 90 t 70 t 50 t 35 t 11 t Ball Hook
Weight (t) 1.3 0.9 0.85 0.7 0.3

Operation of this equipment in excess of rated loads

or disregard of instruction voids the warranty.

Assembling the counterweight

Direction of Front and Rear
for Machinery
31.9 ton counterweight
14.4 ton carbody weight
(A) (B)
(Standard type)
1.5°
No.4 No.5
No.3
No.2
No.1
Counterweights
1.5° 3°

Carbody weights
• Working area shall be inshore and smooth water.
• Applicable regulations for structure japanese construction
codes for mobile crane Assembling the counterweight
* Regulation of class of shipping (abs, lloyd, bv, nk, etc) are (Equipped with self removal device)
not adapted. 31.3 ton counterweight
14.4 ton carbody weight
• At radii and boom lengths where no ratings are shown on
(Optinal type)
chart, operation is not intended nor approved. No.4 No.5
• Boom inserts and guy lines must be arranged as shown in the No.2 No.3
"operator's manual". No.1
• Boom hoist reeving is 12 part line. Counterweights
• Gantry must be in raised position for all conditions.
• Boom backstops are required for all boom lengths.
• The boom should be erected over the front of the crawlers, not Carbody weights
laterally.
• Ratings inside of boxes are limited by strength of • The lifting capacity does not change due to the type of
materials. counterweights (standard or optional).
• The minimum rated load is 1.4 (ton).
• Crawler frames must be fully extended for all crane operations.
• The machinery should be fastened to the deck of the barge to
prevent tip over and sliding.
• Towing area
Towing area shall be within coastal area and quiet wave
condition. Offshore and open sea is not considered for this
machinery. Depend on the height of wave, counterweight shall
be reduced during towing.

20
LIFTING CAPACITIES
Barge Rating Chart Counterweight: 31.9 t
Carbody Weight: 14.4 t
Crane Boom Lifting Capacities Crawler Fully Extended
Unit: metric ton
Boom Boom
length length
Load (m) 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 (m) Load
radius (m) radius (m)

4.5 4.6m/50.0 4.5

5.0 44.8 5.0
5.5 37.0 40.4 5.5
6.0 31.5 36.9 6.2m/35.5 6.9m/31.4 6.0
7.0 26.7 31.4 31.2 30.9 7.5m/28.1 7.0
8.0 23.0 26.6 26.5 26.4 26.3 8.2m/24.9 8.9m/22.2 8.0
9.0 20.1 22.9 22.8 22.7 22.6 22.5 22.1 9.6m/19.4 9.0
10.0 15.8 20.3 20.2 20.1 20.0 19.9 19.8 19.1 10.0
12.0 11.9 16.1 16.0 15.9 15.8 15.7 15.6 15.5 12.0
14.0 14.4m/10.8 12.6 12.8 12.7 12.6 12.5 12.4 12.3 14.0
16.0 10.4 10.8 10.8 10.7 10.6 10.5 10.4 16.0
18.0 17.0m/8.5 8.7 9.0 9.2 9.1 9.0 8.9 18.0
20.0 19.6m/7.4 7.7 8.0 8.1 8.0 7.9 20.0
22.0 6.5 6.9 7.0 7.0 6.9 22.0
24.0 22.3m/6.3 5.9 6.1 6.2 6.1 24.0
26.0 24.9m/5.5 5.2 5.4 5.3 26.0
28.0 27.6m/4.6 4.6 4.6 28.0
30.0 4.0 4.0 30.0
32.0 30.2m/3.9 3.5 32.0
34.0 32.9m/3.2 34.0
Reeves 5 4 4 3 3 3 2 2 Reeves

Note:
Ratings according to japanese construction codes for mobile cranes and japanese safety ordinance on cranes, etc.
Ratings shown in are determined by the strength of the boom or other structual components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.

21
TRANSPORTATION PLAN
Name Dimension Weight (kg)

Base Machine 12,090

• Boom base
• Gantry
• Crawler

3,320

3,350
• Wire rope 41,230
(Front / rear / boom hoist)
3,500

Base Machine 8,210

• Gantry
• Crawler
• Wire rope
39,170
3,320

3,350
(Front / rear / boom hoist)

3,500

Base Machine
12,090 2,990*1
• Boom base
• Gantry
• Wire rope
(Front / rear / boom hoist) 26,870
2,920

2,960
• Without crawler
• Without side steps
3,500

Base Machine
• Gantry 7,700 2,990*1
• Wire rope
(Front / rear / boom hoist)
2,870

• Without crawler 24,810

• Without side steps

3,500 2,990

Crawler

6,280 800

7,180
980

1,040

*1 With the side step on cabin side : 3,170

With the side steps on the both sides : 3,340

22
23
24
PARTS AND ATTACHMENTS
Base Machine Jib Tip
Boom base, Gantry, Crawler, Wire rope (Front/rear/boom hoist) Weight: 280 kg
Weight: 41,230 kg Width: 3,500 mm

800
12,090 790 5,000

Jib Base
Weight: 200 kg
3,320

800
4,810 800

3.0 m
Jib Insert
3,350

Weight: 100 kg
3,110 800

3,500 6.1 m

800
Jib Insert
Weight: 180 kg
6,160 800
Crawler
Weight: 7,180 kg

800
6,280 800 Strut Crane
Weight: 250 kg Backstop
Weight: 270 kg (1 piece)

340
980

840

5,130
1,040 3,620
620

Counterweight No.1 Counterweight No.4 (L) Counterweight (1) (Option)

Weight: 10,540 kg Weight: 1,280 kg Weight: 8,310 kg
930 410
1,080

1,190
1,050

4,430
1,050

830

3,500
Counterweight No.4 (R)
Weight: 1,900 kg
Counterweight No.2 410 1,300
Weight: 9,930 kg Counterweight (L) (2) (4) (Option) Counterweight (R) (3) (5) (Option)
Weight: 5,750 kg Weight: 5,750 kg
1,450 880 880 1,450
1,050

1,050

1,170

1,170
650

3,500
Carbody Weight
Weight: 7,200 kg
Counterweight No.3 Self removal unit (Option)
Weight: 8,250 kg Weight: 870 kg
1,590 980
1,790
1,050

1,900

1,970
640

620

3,500

25
 Boom Tip Auxiliary Sheave
Weight: 1,220 kg Weight: 195 kg

1,510
1,480
1,320

1,100
6,910

Boom Base 870 480

Weight: 1,120 kg

1,700 Upper Spreader

Weight: 280 kg

5,970 1,490

680
3.0 m
Boom Insert
Weight: 300 kg
1,580 300
1,320

3,160 1,490

Ball Hook 35 t Hook

Weight: 300 kg Weight: 700 kg
6.1 m
Boom Insert 357 400 700
Weight: 520 kg

1,140
1,320

1,580
1,065

6,210 1,490

12.2 m 50 t Hook 70 t Hook

Insert Boom Weight: 850 kg Weight: 900 kg
Weight: 950 kg 390 700
435 700
1,320

1,250
1,215

1,820
1,700

12,310 1,490

12.2 m
Boom Insert (with lug)
Weight: 970 kg 90 t Hook
Weight: 1,300 kg

490 700
1,320

1,365

12,310 1,490
1,870

26
Note: This catalog may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your
country. Please consult KOBELCO for those items you may require. Due to our policy of continual product improvements all designs and
specifications are subject to change without advance notice.
Copyright by KOBELCO CONSTRUCTION MACHINERY CO., LTD. No part of this catalog may be reproduced in any manner without notice.

Inquiries To :
5-15, Kitashinagawa 5-chome, Shinagawa-ku,Tokyo 141-8626 JAPAN
Tel: +81-3-5789-2121 Fax: +81-3-5789-3372
URL: https://www.kobelcocm-global.com

KOBELCO is the corporate mark used by Kobe Steel on a variety of products Bulletin No. CKS900-SPEC-NR5 2202005SF Printed in Japan
and in the names of a number of Kobe Steel Group companies.